Technodigm UV equipment ranges from UV curing flood lamps, spot curing lamps to UV conveyors can be integrated into existing manufacturing assembly lines or used as stand-alone, bench-top curing systems and can be used with various kinds of UV adhesives and UV coatings.
Mastering MySQL Database Architecture: Deep Dive into MySQL Shell and MySQL R...
UV Curing System - Technodigm Innovation
1. UV Curing Systems
UV Spot Curing UVSPOT
UVSPOT is designed for operations that require flexibility, high performance/very high intensity and reliability. Its optics/
UV was engineered for maximum efficiency in the delivery of UV energy through a light guide. Its design also ensures
that not much heat will be transmitted. UV Spot has a lamp life expectancy of 2000hrs and a maximum intensity of
13,000mW/cm². Maintenance free and with slow degradation, it will have low lamp replacement rate. This results in
good productivity and reliability in the production process.
Features
• Long Lamp Life of 2000hrs
The system is designed with an optimized cooling system and an efficient optics design. This enables the lamp
to be cooled and maintain at a proper temperature for best performance. Degradation of the lamp is slow and
gradual and even at 2000hrs significant intensity can still be obtained from the lamp.
• Cool Light Output
UV Spot has a specially designed IR filter that helps to cut off high percentage of IR from transmitting through the
light guide.
• Timer Controlled Shutter
UV Spot has a programmable shutter for user to vary or set a certain intensity value. This setting can be easily done
through the LCD interface. Values from 1 to 100% can be set.
• Quick-change Lamp
The unique feature of the system is in its quick changing of lamp. The lamp can be easily accessed by removing a
side panel just by loosening a single thumbscrew.
Specifications
Lamp Rating 100W
Power Supply 220VAC (110 VAC optional), 5A (max), solid state
Lamp Life Up to 2000 hours
Shutter Programmable
Intensity >13,000mW/cm2 (as measured directly on a UV meter)
Lamp Spectral Range 250-600 nm
Light Delivery High Efficiency Liquid Light Guide, Dual, Triple & Quad- Pole
Light Guides with various lengths available
Dimension (in cm) 27 (L) X 30 (H) X 13 (W)
Weight 6.8 kg
www.techno-digm.com 21
Technodigm Catalogue.indd 21 7/3/12 10:09 AM
2. UV Point UVP
UV Spot Curing system is a high performance compact light curing system. Maintenance free, it incorporates an
ozone-free long life lamp and a highly efficient reflector for maximum output. The system is designed for convenience
of use with any curing process as it is highly portable it is also suitable for use with conveyors.
Features
• Long Lamp Life
The lamp housing is designed to optimize airflow so that there is proper and adequate cooling of the lamp. This will
prevent hot spots and arc sputtering thus helping to maintain good life span for the lamp. The lamp is also designed
with does not degrade sharply over time.
• Cool Light Output
UV Point comes with a diachronic coated mirror, which reflects only the usable UV wavelengths of light through the
light guide. IR, which is the main cause of heat, is thus minimized. This ensures that curing will be as cool as possible.
Combined with an optional inline filter, heat transmitted to the substrate/material can be cut even further. This
compares favorably to units in this class, which only uses inline filter thus resulting in high IR being transmitted.
• Timer Controlled Shutter
UV Point has a simple and easy to use timer for the control of the shutter. The timer can be switched from auto to
manual for operator control of curing duration this is situated on the front panel for easy access.
• Quick-change Lamp
The unique feature of the system is in its quick changing of lamp. The lamp can be
easily accessed by removing a side panel just by loosening a single thumbscrew.
Specifications
Lamp 100W Short Arc Mercury Lamp
Power 90-265 VAC Solid State Switching Power Supply
Lamp Life Up to 1000 hours
Shutter Long Life Shutter with Return Spring
Intensity 10W/cm2 (dependant on distance from substrate)
Lamp Spectral Range 250-600 nm
Light Delivery High Efficiency Liquid Light Guide, Dual,Triple & Quad-Pole
Light Guides with various lengths available
Dimensions (cm) 27 (L) X 30 (H) X 13 (W)
Weight 6.8 kg
UV Conveyor UVC2000
UVC2000 is a high intensity RF powered system which uses electrodeless lamp that is highly reliable and cost effective
to use. These electrodeless lamps have high efficiency and good performance with a long working life thus providing
more stability to curing of UV adhesive and epoxies.
The lamp module incorporates a highly elliptical reflective reflector that combines well with the lamp to provide a high
peak of UV irradiance. This high peak irradiance provides more efficient and faster curing with relatively low infrared
emission. Start up time is short (less than a minute). A standby mode is provided for even faster start up.
As a system, UVC2000 is easy to use and incorporate into production lines without much effort.
Features
• High intensity, Fast curing
• Long lamp life
• Low Maintenance
• 4000W System is also available
• Available in table top or floor standing version
Specifications
Lamp 2000W (max.)
Lamp type 6” Electrodeless
Power 220VAC, 50/60Hz, 20Amps, Single Phase
Intensity 600mW/cm² UVA
Curing Width 156mm
Belt Width 240mm
Dimension (cm) 165 (L) X 140 (H) X 56 (W)
22
www.techno-digm.com
Technodigm Catalogue.indd 22 7/3/12 10:09 AM
3. UV Bench Top Conveyor UV6
UV6 is a bench top or stand mounted light curing system, designed for laboratory or high volume production
applications. The conveyor features a quiet variable speed motor, with a velocity regulating drive that keeps the belt
speed constant for varying loads. The system can be configured with single or dual high intensity lamp heads UVMR400,
UVR600 or UVR800, which can be easily removed and reconfigured as stand mounted systems for increased versatility.
Features
• Adjustable Lamp Height
Lamp height can be adjusted from 1.5 to 5 inches
• Full UV Shielding
The conveyor light chamber is totally enclosed, shielding
the operator and passersby from any UV radiation. The light
chamber entrance and exit are protected by sliding doors with
extended hoods.
• Adjustable End Chute
The system has an adjustable position and chute for
accumulating cured parts as they exit the conveyor.
• Exhaust Port
The light chamber has a top-mounted 3” diameter port, for
optional venting to facility exhaust systems.
UVR 800 UVR 400 / 600 UVMR 400
Lamp
Single Dual Single Dual Single Dual
Input Power 220VAC, 50 / 60Hz
Belt Width 9”
Belt Speed 0.7 - 19.6fpm (20 - 600km / min)
Curing Width 6” 6” 4”
40” (100cm) L 51” (300cm) L 40” (100cm) L 51” (300cm) L 32” (80cm) L 40” (100cm) L
Dimension
26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W
(Include blower)
22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H
UV Ray UVR400/600
UVR400/600 is a compact UV curing system which integrates all components into one lamp head. UVR400/600 is
designed as a table top as well as conveyor system. It can be easily mounted on any conveyor system without cabling
or remote control boxes.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp 400/600W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity 200mW/cm2 UVA light (320-390 nm)
Cure Area 14 X 17 cm
Dimensions 255 X 270 X 160 mm
www.techno-digm.com 23
Technodigm Catalogue.indd 23 7/3/12 10:09 AM
4. UV Ray UVR800
UVR800 UV curing system is ideal for use in the electronic, medical and general industry. It is designed for conveyor
system with a lamp rating of 800 watts that will provide a relatively fast curing rate. The system is also easy to use and
install.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp Rating 800W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity >250mW/cm² UVA light (320-390 nm)
Cure Area 15 X 18 cm
Dimensions: Control Box 248 X 298 X 100 mm
Lamp Housing 254 X 260 X 160 mm
UV Mini Ray UVMR400
The UV Mini Ray 400 is a portable or low production UV curing system. Because of its versatility, it can handle a
variety of UV curing applications. The unit features a removable head, which serves as a handheld curing lamp during
operation. Due to its simple yet high-tech design, the Mini Ray is extremely user-friendly and reliable, requiring virtually
no learning curve or setup time.
Features
• High intensity, fast curing
• Two level intensity selection (100 and 50%)
• Lamp Hour Counter
Specifications
Lamp 400W Metal Halide Lamp
Power 220 VAC, 50/60Hz
Intensity 500mW/cm² UVA light (320-390 nm)
Cure Area 8 X 13 cm
Dimensions (mm) 203 X 127 X 149 mm (Lamp Housing Only)
UV Flood UVF400/600
UV Flood Curing System is a high performance, high intensity compact light curing
system. Maintenance free, it incorporates an ozone-free long life lamp and a highly
efficient reflector for maximum output. The system is designed for convenience of use
with any curing process as it is highly portable. It is also suitable for use with conveyors.
Features Specifications
• High Output Intensity Lamp 400/600W Metal Halide Lamp
• Microprocessor Control Power 90-265 VAC, Auto Ranging
• Lamp Intensity Setting Lamp Life Up to 1000 hours
• Exposure Time Setting Shutter Integrated Flexible
• Safety Lamp Spectral Range 250 to 650 nm
• LCD Display Cure Area 20 X 15 cm
Dimensions (in cm) 28 (L) X 25 (H) X 22 (W)
Weight 6.8 kg
24
www.techno-digm.com
Technodigm Catalogue.indd 24 7/3/12 10:09 AM