SlideShare ist ein Scribd-Unternehmen logo
1 von 22
 What is transformer
 Structure and working principle
 Construction of transformer
 Losses in transformer
 Ideal v/s practical transformer
 Uses and application of transformer
 A transformer is a device that changes ac electric power at one
voltage level to ac electric power at another voltage level
through the action of a magnetic field.
 There are two or more stationary electric circuits that are
coupled magnetically.
 It involves interchange of electric energy between two or more
electric systems
 Transformers provide much needed capability of changing the
voltage and current levels easily.
They are used to step-up generator voltage to an appropriate
voltage level for power transfer.
Stepping down the transmission voltage at various levels for
distribution and power utilization.
 A transformer is a static piece of apparatus by means of
which an electrical power is transferred from one
alternating current circuit to another electrical circuit
 There is no electrical contact between them
 The desire change in voltage or current without any
change in frequency
 Symbolically the transformer denoted as
NOTE :
Itworksontheprincipleofmutualinduction
 The transformer two inductive coils ,these are electrical
separated but linked through a common magnetic current
circuit
 These two coils have a high mutual induction
 One of the two coils is connected of alternating voltage .this
coil in which electrical energy is fed with the help of source
called primary winding (P) shown in fig.
 The other winding is connected to a load the electrical energy
is transformed to this winding drawn out to the load .this
winding is called secondary winding(S) shown in fig.
 The primary and secondary coil wound on a ferromagnetic
metal core
 The function of the core is to transfer the changing magnetic
flux from the primary coil to the secondary coil
 The primary has N1 no of turns and the secondary has N2 no of
turns the of turns plays major important role in the function of
transformer
 The transformer works in the principle of mutual induction
“The principle of mutual induction states that when the two coils are
inductively coupled and if the current in coil change uniformly then the
e.m.f. induced in the other coils. This e.m.f can drive a current when a
closed path is provide to it.”
 When the alternating current flows in the primary coils, a
changing magnetic flux is generated around the primary coil.
 The changing magnetic flux is transferred to the secondary coil
through the iron core
 The changing magnetic flux is cut by the secondary coil, hence
induces an e.m.f in the secondary coil
 Now if load is connected to a secondary winding, this e.m.f
drives a current through it
 The magnitude of the output voltage can be controlled by the
ratio of the no. of primary coil and secondary coil
The frequency of mutually induced e.m.f as same
that of the alternating source which supplying to the
primary winding b
 These are two basic of transformer construction
 Magnetic core
 Windings or coils
 Magnetic core
 The core of transformer either square or rectangular type in
size
 It is further divided into two parts vertical and horizontal
 The vertical portion on which coils are wounds called limb
while horizontal portion is called yoke. these parts are
 Core is made of laminated core type constructions, eddy
current losses get minimize.
 Generally high grade silicon steel laminations (0.3 to 0.5mm)
are used
 Conducting material is used in the winding of the transformer
 The coils are used are wound on the limbs and insulated from
each other
 The two different windings are wounds on two different limbs
 The leakage flux increases which affects the performance and
efficiency of transformer
 To reduce the leakage flux it is necessary that the windings
should be very close to each other to have high mutual
induction
 In this one magnetic circuit and cylindrical coils are used
 Normally L and T shaped laminations areused
 Commonly primary winding would on one limb while
secondary on the other but performance will be reduce
 To get high performance it is necessary that other the two
winding should be very close to each other
 In this type two magnetic circuit are used
 The winding is wound on central limbs
 For the cell type each high voltage winding lie between two
voltage portion sandwiching the high voltage winding
 Sub division of windings reduces the leakage flux
 Greater the number of sub division lesser the reactance
 This type of construction is used for high voltage
 Copper losses :
It is due to power wasted in the form of I2Rdue to
resistance of primary and secondary. The magnitude of
copper losses depend upon the current flowing through
these coils.
The iron losses depend on the supply voltage while the copper depend
on the current .the losses are not dependent on the phase angle between
current and voltage .hence the rating of the transformer is expressed as
a product o f voltage and current called VArating of transformer. It is
not expressed in watts or kilowatts. Most of the timer, is rating is
expressed in KVA.
Hysteresis loss :
During magnetization and demagnetization ,due to hysteresis
effect some energy losses in the core called hysteresis loss
Eddy current loss :
The leakage magnetic flux generates the E.M.F in the core
produces current is called of eddy current loss.
 A transformer is said to be ideal if it satisfies the
following properties, but no transformer is ideal in
practice.
 It has no losses
 Windings resistance are zero
 There is no flux leakage
 Small current is required to produce the magnetic field
While the practical transformer has windings resistance ,
some leakage flux and has lit bit losses
 The transformer used in television and photocopy
machines
 The transmission and distribution of alternating power is
possible by transformer
 Simple camera flash uses fly back transformer
 Signal and audio transformer are used couple in
amplifier
Todays transformer is become an essential part of
electrical engineering
 Electrical engineering by UA Bakshi
 Principal of electrical machine by VK Mehta
 Electrical machine by RK Rajput
 www.allaboutcircuit.com
 www.iiee.com
Transformer by Hemant

Weitere ähnliche Inhalte

Was ist angesagt?

electrical transformer english I
electrical transformer english Ielectrical transformer english I
electrical transformer english Icarlossalasm123
 
Transformer
TransformerTransformer
TransformerS M Milu
 
Transformer ppt download
Transformer ppt downloadTransformer ppt download
Transformer ppt downloadANKUSHKUMAR407
 
Physics transformer file
Physics transformer filePhysics transformer file
Physics transformer fileArmaan Kazzami
 
Single phase transformers
Single phase transformersSingle phase transformers
Single phase transformersEkeeda
 
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)Neha Gethe
 
Electrical transformer working and construction
Electrical transformer working and constructionElectrical transformer working and construction
Electrical transformer working and constructionSourabh sharma
 
Single phase transformer
Single phase transformerSingle phase transformer
Single phase transformerMahendra Rajput
 

Was ist angesagt? (20)

electrical transformer english I
electrical transformer english Ielectrical transformer english I
electrical transformer english I
 
Transformer
TransformerTransformer
Transformer
 
Transformer
TransformerTransformer
Transformer
 
Transformer
TransformerTransformer
Transformer
 
transformer
transformertransformer
transformer
 
Transformer
TransformerTransformer
Transformer
 
Transformer
TransformerTransformer
Transformer
 
Transformer
TransformerTransformer
Transformer
 
Transformer ppt download
Transformer ppt downloadTransformer ppt download
Transformer ppt download
 
Physics transformer file
Physics transformer filePhysics transformer file
Physics transformer file
 
Single phase transformers
Single phase transformersSingle phase transformers
Single phase transformers
 
Transformer
TransformerTransformer
Transformer
 
Transformers
TransformersTransformers
Transformers
 
Transformers
TransformersTransformers
Transformers
 
transformer
 transformer transformer
transformer
 
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)
TRANSFORMER(परिणामित्र , परिवर्तक, रूपांतरकर्ता)
 
Transformer
TransformerTransformer
Transformer
 
Electrical transformer working and construction
Electrical transformer working and constructionElectrical transformer working and construction
Electrical transformer working and construction
 
Single phase transformer
Single phase transformerSingle phase transformer
Single phase transformer
 
Transformers
TransformersTransformers
Transformers
 

Ähnlich wie Transformer by Hemant

transformer slide prsentation
transformer slide prsentation transformer slide prsentation
transformer slide prsentation abu jubayer
 
types of winding dc machine
 types of winding dc machine types of winding dc machine
types of winding dc machineRaviraj solanki
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptxSangeetaTripathi8
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptxGITSHODEE
 
Construction & E.M.F. eqn. of transformer
Construction & E.M.F. eqn. of transformerConstruction & E.M.F. eqn. of transformer
Construction & E.M.F. eqn. of transformerJay Baria
 
transformer breif introduction HV and LV Connection
transformer breif introduction HV and LV Connectiontransformer breif introduction HV and LV Connection
transformer breif introduction HV and LV Connectionfarasatali30
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptxRahulTilekar4
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptxdravidmishra1
 
Presentation on transformer
Presentation on transformerPresentation on transformer
Presentation on transformerGautamKumar891
 
Presentation on Transformer (1).pptx
Presentation on Transformer (1).pptxPresentation on Transformer (1).pptx
Presentation on Transformer (1).pptxAvikashSingh1
 

Ähnlich wie Transformer by Hemant (20)

transformer slide prsentation
transformer slide prsentation transformer slide prsentation
transformer slide prsentation
 
Transformer construction,types and working
Transformer construction,types and workingTransformer construction,types and working
Transformer construction,types and working
 
Full transformer
Full transformerFull transformer
Full transformer
 
types of winding dc machine
 types of winding dc machine types of winding dc machine
types of winding dc machine
 
Presentation on Tranfo.pptx
Presentation on Tranfo.pptxPresentation on Tranfo.pptx
Presentation on Tranfo.pptx
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptx
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptx
 
Physics Transformer 12th.pdf
Physics Transformer 12th.pdfPhysics Transformer 12th.pdf
Physics Transformer 12th.pdf
 
Transformer
TransformerTransformer
Transformer
 
Construction & E.M.F. eqn. of transformer
Construction & E.M.F. eqn. of transformerConstruction & E.M.F. eqn. of transformer
Construction & E.M.F. eqn. of transformer
 
Transformer.pptx
Transformer.pptxTransformer.pptx
Transformer.pptx
 
Transformer
TransformerTransformer
Transformer
 
TRANSFORMER.pptx
TRANSFORMER.pptxTRANSFORMER.pptx
TRANSFORMER.pptx
 
Chapter two
Chapter twoChapter two
Chapter two
 
transformer breif introduction HV and LV Connection
transformer breif introduction HV and LV Connectiontransformer breif introduction HV and LV Connection
transformer breif introduction HV and LV Connection
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptx
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptx
 
Presentation on Transformer.pptx
Presentation on Transformer.pptxPresentation on Transformer.pptx
Presentation on Transformer.pptx
 
Presentation on transformer
Presentation on transformerPresentation on transformer
Presentation on transformer
 
Presentation on Transformer (1).pptx
Presentation on Transformer (1).pptxPresentation on Transformer (1).pptx
Presentation on Transformer (1).pptx
 

Kürzlich hochgeladen

Levelling - Rise and fall - Height of instrument method
Levelling - Rise and fall - Height of instrument methodLevelling - Rise and fall - Height of instrument method
Levelling - Rise and fall - Height of instrument methodManicka Mamallan Andavar
 
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Sumanth A
 
signals in triangulation .. ...Surveying
signals in triangulation .. ...Surveyingsignals in triangulation .. ...Surveying
signals in triangulation .. ...Surveyingsapna80328
 
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor CatchersTechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catcherssdickerson1
 
Engineering Drawing section of solid
Engineering Drawing     section of solidEngineering Drawing     section of solid
Engineering Drawing section of solidnamansinghjarodiya
 
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENTFUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENTSneha Padhiar
 
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overviewArtificial Intelligence in Power System overview
Artificial Intelligence in Power System overviewsandhya757531
 
List of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdfList of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdfisabel213075
 
Earthing details of Electrical Substation
Earthing details of Electrical SubstationEarthing details of Electrical Substation
Earthing details of Electrical Substationstephanwindworld
 
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...Erbil Polytechnic University
 
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMSHigh Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMSsandhya757531
 
Virtual memory management in Operating System
Virtual memory management in Operating SystemVirtual memory management in Operating System
Virtual memory management in Operating SystemRashmi Bhat
 
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptJohnWilliam111370
 
Main Memory Management in Operating System
Main Memory Management in Operating SystemMain Memory Management in Operating System
Main Memory Management in Operating SystemRashmi Bhat
 
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...Stork
 
11. Properties of Liquid Fuels in Energy Engineering.pdf
11. Properties of Liquid Fuels in Energy Engineering.pdf11. Properties of Liquid Fuels in Energy Engineering.pdf
11. Properties of Liquid Fuels in Energy Engineering.pdfHafizMudaserAhmad
 
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS  SERVICE MECHANISM.pdfDEVICE DRIVERS AND INTERRUPTS  SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdfAkritiPradhan2
 
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfComprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfalene1
 
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTESCME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTESkarthi keyan
 
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxTurn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxStephen Sitton
 

Kürzlich hochgeladen (20)

Levelling - Rise and fall - Height of instrument method
Levelling - Rise and fall - Height of instrument methodLevelling - Rise and fall - Height of instrument method
Levelling - Rise and fall - Height of instrument method
 
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
 
signals in triangulation .. ...Surveying
signals in triangulation .. ...Surveyingsignals in triangulation .. ...Surveying
signals in triangulation .. ...Surveying
 
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor CatchersTechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
 
Engineering Drawing section of solid
Engineering Drawing     section of solidEngineering Drawing     section of solid
Engineering Drawing section of solid
 
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENTFUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
FUNCTIONAL AND NON FUNCTIONAL REQUIREMENT
 
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overviewArtificial Intelligence in Power System overview
Artificial Intelligence in Power System overview
 
List of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdfList of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdf
 
Earthing details of Electrical Substation
Earthing details of Electrical SubstationEarthing details of Electrical Substation
Earthing details of Electrical Substation
 
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...
Comparative study of High-rise Building Using ETABS,SAP200 and SAFE., SAFE an...
 
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMSHigh Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
 
Virtual memory management in Operating System
Virtual memory management in Operating SystemVirtual memory management in Operating System
Virtual memory management in Operating System
 
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.pptROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
ROBOETHICS-CCS345 ETHICS AND ARTIFICIAL INTELLIGENCE.ppt
 
Main Memory Management in Operating System
Main Memory Management in Operating SystemMain Memory Management in Operating System
Main Memory Management in Operating System
 
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
Stork Webinar | APM Transformational planning, Tool Selection & Performance T...
 
11. Properties of Liquid Fuels in Energy Engineering.pdf
11. Properties of Liquid Fuels in Energy Engineering.pdf11. Properties of Liquid Fuels in Energy Engineering.pdf
11. Properties of Liquid Fuels in Energy Engineering.pdf
 
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS  SERVICE MECHANISM.pdfDEVICE DRIVERS AND INTERRUPTS  SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
 
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdfComprehensive energy systems.pdf Comprehensive energy systems.pdf
Comprehensive energy systems.pdf Comprehensive energy systems.pdf
 
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTESCME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
 
Turn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptxTurn leadership mistakes into a better future.pptx
Turn leadership mistakes into a better future.pptx
 

Transformer by Hemant

  • 1.
  • 2.  What is transformer  Structure and working principle  Construction of transformer  Losses in transformer  Ideal v/s practical transformer  Uses and application of transformer
  • 3.  A transformer is a device that changes ac electric power at one voltage level to ac electric power at another voltage level through the action of a magnetic field.  There are two or more stationary electric circuits that are coupled magnetically.  It involves interchange of electric energy between two or more electric systems  Transformers provide much needed capability of changing the voltage and current levels easily. They are used to step-up generator voltage to an appropriate voltage level for power transfer. Stepping down the transmission voltage at various levels for distribution and power utilization.
  • 4.  A transformer is a static piece of apparatus by means of which an electrical power is transferred from one alternating current circuit to another electrical circuit  There is no electrical contact between them  The desire change in voltage or current without any change in frequency  Symbolically the transformer denoted as NOTE : Itworksontheprincipleofmutualinduction
  • 5.
  • 6.  The transformer two inductive coils ,these are electrical separated but linked through a common magnetic current circuit  These two coils have a high mutual induction  One of the two coils is connected of alternating voltage .this coil in which electrical energy is fed with the help of source called primary winding (P) shown in fig.  The other winding is connected to a load the electrical energy is transformed to this winding drawn out to the load .this winding is called secondary winding(S) shown in fig.
  • 7.  The primary and secondary coil wound on a ferromagnetic metal core  The function of the core is to transfer the changing magnetic flux from the primary coil to the secondary coil  The primary has N1 no of turns and the secondary has N2 no of turns the of turns plays major important role in the function of transformer
  • 8.  The transformer works in the principle of mutual induction “The principle of mutual induction states that when the two coils are inductively coupled and if the current in coil change uniformly then the e.m.f. induced in the other coils. This e.m.f can drive a current when a closed path is provide to it.”  When the alternating current flows in the primary coils, a changing magnetic flux is generated around the primary coil.  The changing magnetic flux is transferred to the secondary coil through the iron core  The changing magnetic flux is cut by the secondary coil, hence induces an e.m.f in the secondary coil
  • 9.  Now if load is connected to a secondary winding, this e.m.f drives a current through it  The magnitude of the output voltage can be controlled by the ratio of the no. of primary coil and secondary coil The frequency of mutually induced e.m.f as same that of the alternating source which supplying to the primary winding b
  • 10.
  • 11.  These are two basic of transformer construction  Magnetic core  Windings or coils  Magnetic core  The core of transformer either square or rectangular type in size  It is further divided into two parts vertical and horizontal  The vertical portion on which coils are wounds called limb while horizontal portion is called yoke. these parts are  Core is made of laminated core type constructions, eddy current losses get minimize.  Generally high grade silicon steel laminations (0.3 to 0.5mm) are used
  • 12.  Conducting material is used in the winding of the transformer  The coils are used are wound on the limbs and insulated from each other  The two different windings are wounds on two different limbs  The leakage flux increases which affects the performance and efficiency of transformer  To reduce the leakage flux it is necessary that the windings should be very close to each other to have high mutual induction
  • 13.  In this one magnetic circuit and cylindrical coils are used  Normally L and T shaped laminations areused  Commonly primary winding would on one limb while secondary on the other but performance will be reduce  To get high performance it is necessary that other the two winding should be very close to each other
  • 14.
  • 15.  In this type two magnetic circuit are used  The winding is wound on central limbs  For the cell type each high voltage winding lie between two voltage portion sandwiching the high voltage winding  Sub division of windings reduces the leakage flux  Greater the number of sub division lesser the reactance  This type of construction is used for high voltage
  • 16.
  • 17.  Copper losses : It is due to power wasted in the form of I2Rdue to resistance of primary and secondary. The magnitude of copper losses depend upon the current flowing through these coils. The iron losses depend on the supply voltage while the copper depend on the current .the losses are not dependent on the phase angle between current and voltage .hence the rating of the transformer is expressed as a product o f voltage and current called VArating of transformer. It is not expressed in watts or kilowatts. Most of the timer, is rating is expressed in KVA.
  • 18. Hysteresis loss : During magnetization and demagnetization ,due to hysteresis effect some energy losses in the core called hysteresis loss Eddy current loss : The leakage magnetic flux generates the E.M.F in the core produces current is called of eddy current loss.
  • 19.  A transformer is said to be ideal if it satisfies the following properties, but no transformer is ideal in practice.  It has no losses  Windings resistance are zero  There is no flux leakage  Small current is required to produce the magnetic field While the practical transformer has windings resistance , some leakage flux and has lit bit losses
  • 20.  The transformer used in television and photocopy machines  The transmission and distribution of alternating power is possible by transformer  Simple camera flash uses fly back transformer  Signal and audio transformer are used couple in amplifier Todays transformer is become an essential part of electrical engineering
  • 21.  Electrical engineering by UA Bakshi  Principal of electrical machine by VK Mehta  Electrical machine by RK Rajput  www.allaboutcircuit.com  www.iiee.com