Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.
Chapter 1
Introduction to System Dynamics
Course Instructor
K. Hajlaoui, Ph.D.
Associate Professor,
Mechanical Engineering...
2
Imam University, 2014
‫همك‬333 ,
What is the system?
Definition
-A system is defined as a combination of components
(ele...
3
Imam University, 2014
‫همك‬333 ,
What is the system?
System and Surroundings
We scope a system by defining its boundary ...
What is the system?
The environment affects the system through the input
(cause) and systems responds (effect) due to inpu...
Static Vs. dynamic systems
Static systems
The current output of the system (t, y(t)) depends only on
current input (t,x(t...
Static Vs. dynamic systems
 dynamic systems
 The present output of the system depends on the
current and the previous in...
system Classifications
Excitation and response of a system
Dynamic systems
7
system Classifications
Dynamic systems are found in all major engineering areas
 Mechanical systems
 Mechanical systems ...
system Classifications
Electrical systems
 Electrical systems are concerned with the behavior of three
fundamental quant...
system Classifications
Thermal systems
Involves heating of objects and transports of thermal energy
Thermal systems hav...
system Classifications
Fluid systems
 Fluid systems Involves connection of fluid flows in tube and tank
 Fluid systems ...
system Classifications
Mixed systems
 Systems which consists of two or more previously mentioned
systems (electromechani...
system Classifications
13
system Classifications
14
Mathematical Modelling of DS
Way we need the Modelling ?
 Any attempt to design a system must begin with a
prediction of ...
Mathematical Modelling of DS
Mathematical Modelling
Mathematical modelling involves descriptions
of important system char...
Mathematical Modelling of DS
Mathematical Modelling
Mathematical model can not represent a
physical system completely.
 ...
Linear systems and nonlinear systems.
Linear systems.
The equations that constitute the model are linear
linear systems ...
Mathematical Modelling of DS
Linear systems and nonlinear systems.
This principle states that the response
produced by si...
Nonlinear systems,
is described by a nonlinear function.
The principle of superposition is not
applicable. In general, p...
Continuous-time systems and discrete-time
systems
 Continuous-time systems are systems in which the
signals involved are ...
Conservative system
the total mechanical energy remains constant,
there are no dissipations present, e.g. simple
harmonic...
 Multidimensional system is described by a vector of
functions like
where x is a vector with n components, A is n x n
mat...
Classification of System Models: Summary
Mathematical Modelling of DS
24
Remarks on mathematical models.
The model that the engineer is analyzing is an
approximate mathematical description of th...
Mathematical Modelling Procedure:
Mathematical Modelling of DS
Flowchart for the mathematical
modeling procedure
The proce...
ANALYSIS & DESIGN OF DYNAMIC SYSTEMS
Mathematical Modelling of DS
Analysis. Investigation of the
performance of a system u...
Conclusion
a successful engineer must be able to obtain
a mathematical model of a given system and
predict its performanc...
Conclusion
The objective of this course is then
(1) to enable the students to build mathematical
models that closely repre...
Nächste SlideShare
Wird geladen in …5
×

System dynamics ch 1

chapter 1 of system dynamic

  • Als Erste(r) kommentieren

System dynamics ch 1

  1. 1. Chapter 1 Introduction to System Dynamics Course Instructor K. Hajlaoui, Ph.D. Associate Professor, Mechanical Engineering Dept., IMAM University, 2015 Imam University, 2015 ‫144همك‬ , 1
  2. 2. 2 Imam University, 2014 ‫همك‬333 , What is the system? Definition -A system is defined as a combination of components (elements) that act together to perform a certain objective. -it contains of interacting components connected together in such away that the variation in one component affect the other components -A component is a single functioning unit of a system 2
  3. 3. 3 Imam University, 2014 ‫همك‬333 , What is the system? System and Surroundings We scope a system by defining its boundary ; this means choosing which entities are inside the system and which are outside the boundary- part of the environment SYSTEM BOUNDARY SURROUNDINGS 3
  4. 4. What is the system? The environment affects the system through the input (cause) and systems responds (effect) due to input System Variables To every system there corresponds two sets of variables Input variables originate outside the system and are not affected by what happens in the system Output variables are the internal variables that are used to monitor or regulate the system. They result from the interaction of the system with its environment and are influenced by the input variables 4
  5. 5. Static Vs. dynamic systems Static systems The current output of the system (t, y(t)) depends only on current input (t,x(t)) -The output of a static system remains constant if the input does not change system Classifications 5
  6. 6. Static Vs. dynamic systems  dynamic systems  The present output of the system depends on the current and the previous input;. The output changes with time even if the input is constant (time varying); system is not in a equilibrium state.  Have a response that is not instantaneously proportional to the input or disturbance and that may continue after the input is held constant.  Dynamic systems can respond to input signals, disturbance signals, or initial conditions system Classifications 6
  7. 7. system Classifications Excitation and response of a system Dynamic systems 7
  8. 8. system Classifications Dynamic systems are found in all major engineering areas  Mechanical systems  Mechanical systems are concerned with the behavior of matter under the action of forces/torques (Governed by Newton's 2nd law)  Systems that possess significant mass, inertia, spring and energy dissipation (damper) components driven by forces, torques, specified displacements are considered to be mechanical systems. Examples - An automobile is a good example of a dynamic mechanical system. It has a dynamic response as it speeds up, slows down, or rounds a curve in the road. - The body and the suspension system of the car have a dynamic response of the position of the vehicle as it goes over a bump. 8
  9. 9. system Classifications Electrical systems  Electrical systems are concerned with the behavior of three fundamental quantities; charge, current and voltage (Governed by Kirchoff's laws)  Electrical systems include circuits with resistive, capacitive, or inductive components excited by voltage or current. Electronic circuits can include transistors or amplifiers. Examples A television receiver has a dynamic response of the beam that traces the picture on the screen of the set. The TV tuning circuit, which allows you to select the desired channel, also has a dynamic response. Dynamic systems are found in all major engineering areas 9
  10. 10. system Classifications Thermal systems Involves heating of objects and transports of thermal energy Thermal systems have components that provide resistance (conduction, convection or radiation) and a capacitance (mass a specific heat) when excited by temperature or heat flow. Example A heating system warming a house has a dynamic response as the temperature rises to meet the set point on the thermostat. Placing a pot of water over a burner to boil has a dynamic response of the temperature Dynamic systems are found in all major engineering areas 10
  11. 11. system Classifications Fluid systems  Fluid systems Involves connection of fluid flows in tube and tank  Fluid systems employ orifices, restrictions, control valves, accumulators (capacitors), long tubes (inductors), and actuators excited by pressure or fluid flow. Example A city water tower has a dynamic response of the height of the water as a function of the amount of water pumped into the tower and the amount being used by the citizens. Dynamic systems are found in all major engineering areas 11
  12. 12. system Classifications Mixed systems  Systems which consists of two or more previously mentioned systems (electromechanical systems, fluid – mechanical systems, thermo mechanical systems, mechatronics systems…..) with energy conversion between various components. Dynamic systems are found in all major engineering areas 12
  13. 13. system Classifications 13
  14. 14. system Classifications 14
  15. 15. Mathematical Modelling of DS Way we need the Modelling ?  Any attempt to design a system must begin with a prediction of its performance before the system itself can be designed in detail or actually built. Such prediction is based on a mathematical description of the system's dynamic characteristics. This mathematical description is called a mathematical model. 15
  16. 16. Mathematical Modelling of DS Mathematical Modelling Mathematical modelling involves descriptions of important system characteristics by sets of equations A mathematical model usually describes a system by means of variables. Usually physical laws are applied to obtain mathematical model but sometimes experimental procedures are necessary. 16
  17. 17. Mathematical Modelling of DS Mathematical Modelling Mathematical model can not represent a physical system completely.  Approximations and assumptions restrict the validity of the model. For many physical systems, useful mathematical models are described in terms of differential equations. 17
  18. 18. Linear systems and nonlinear systems. Linear systems. The equations that constitute the model are linear linear systems can be represented by linear, time- invariant ordinary differential equations.  Laplace Transformation technique is a powerful tool for solving linear (constant-coefficient) differential equations  The most important property of linear systems is that the principle of superposition is applicable. Mathematical Modelling of DS 18
  19. 19. Mathematical Modelling of DS Linear systems and nonlinear systems. This principle states that the response produced by simultaneous applications of two different forcing functions or inputs is the sum of two individual responses. Consequently, for linear systems, the response to several inputs can be calculated by dealing with one input at a time and then adding the results. 19
  20. 20. Nonlinear systems, is described by a nonlinear function. The principle of superposition is not applicable. In general, procedures for finding the solutions of problems involving such systems are extremely complicated. Mathematical Modelling of DS Linear systems and nonlinear systems. 20
  21. 21. Continuous-time systems and discrete-time systems  Continuous-time systems are systems in which the signals involved are continuous in time. These systems may be described by differential equations. Discrete-time systems are systems in which one or more variables can change only at discrete instants of time.  The materials presented in this course apply to continuous-time systems Mathematical Modelling of DS 21
  22. 22. Conservative system the total mechanical energy remains constant, there are no dissipations present, e.g. simple harmonic oscillator Nonconservative (dissipative) system the total mechanical energy changes due to dissipations like friction or damping, e.g. damped harmonic oscillator Mathematical Modelling of DS 22
  23. 23.  Multidimensional system is described by a vector of functions like where x is a vector with n components, A is n x n matrix and B is a constant vector  One-dimensional system is described by a single function like where a,b are constants. btaxtx bkaxkx   )()´( )()1( BA BA     )()´( )()1( txtx kxkx Mathematical Modelling of DS 23
  24. 24. Classification of System Models: Summary Mathematical Modelling of DS 24
  25. 25. Remarks on mathematical models. The model that the engineer is analyzing is an approximate mathematical description of the physical system; it is not the physical system itself. In reality, NO mathematical model can represent any physical component or system precisely. Approximations and assumptions are always involved and restrict the range of validity of the mathematical model.  So, in making a prediction about a system's performance, any approximations and assumptions involved in the model must be kept in mind. Mathematical Modelling of DS 25
  26. 26. Mathematical Modelling Procedure: Mathematical Modelling of DS Flowchart for the mathematical modeling procedure The procedure can be summarized as follows: 1- Draw a schematic diagram of the system, and define variables. 2. Using physical laws, write equations for each component, combine them according to the system diagram, and obtain a mathematical model. 3. Solve the equations of the model, 4- compared with experimental results. If the experimental results deviate from the prediction to a great extent, the model must be modified. A new model is then derived and a new prediction compared with experimental results. The process is repeated until satisfactory agreement is obtained between the predictions and the experimental results. 26
  27. 27. ANALYSIS & DESIGN OF DYNAMIC SYSTEMS Mathematical Modelling of DS Analysis. Investigation of the performance of a system under specified conditions. The most crucial step is the mathematical model. Design. Process of finding a system that accomplishes a task. Synthesis. Finding a system which will perform in a specified way 27
  28. 28. Conclusion a successful engineer must be able to obtain a mathematical model of a given system and predict its performance.  The engineer must be able to carry out a thorough performance analysis of the system before a prototype is constructed. Dynamic Systems 28
  29. 29. Conclusion The objective of this course is then (1) to enable the students to build mathematical models that closely represent behaviors of physical systems (2) to develop system responses to various inputs so that they can effectively analyze and design dynamic systems. Dynamic Systems 29END…….

×