Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.
WALL&FLOOR TILING
Window Task
R Hammond / G Turner
Tools required for the task
• Spirit level/Water level
• Pencil
• Length of wood
• Measuring tape
• Tile nippers
• Notched...
R Hammond / G Turner3
Using a spirit level
check the window
reveals for plumb.
R Hammond / G Turner4
Again using a spirit
level check the
window sill and
soffit for level.
R Hammond / G Turner5
Use a measuring
tape to find the
centre of the
window sill and
mark using a
pencil.
R Hammond / G Turner6
Using a spirit level
and pencil to
transfer the centre
line to the top and
the bottom of the
wall. T...
R Hammond / G Turner7
Using the staff
stick check the
cuts to the reveals
and both sides of
the wall. Choose
which method ...
R Hammond / G Turner8
Using the staff
stick check the
cuts to the sill and
soffit if the cuts are
to small adjust the
staf...
R Hammond / G Turner9
Once position of
tiles has been
worked out mark
the wall on top and
bottom of the
window using the
s...
R Hammond / G Turner10
Using the staff
stick you can now
check the cutting
at the ceiling and
floor. If these are
not suit...
R Hammond / G Turner11
Using water level
transfer setting out
height around
room and mark
with chalk line.
R Hammond / G Turner12
You can now use
your staff stick to
set the tile baton to
the nearest whole
tile from the floor.
R Hammond / G Turner13
After setting tile
batons and plumb
lines you are now
ready to start tiling
R Hammond / G Turner14
Fix the tiles to
window height you
can now put plumb
lines up both sides
of the window this
will he...
R Hammond / G Turner15
Continue tiling up
both sides of
window ensuring
tiles are kept
plumb and level
throughout
R Hammond / G Turner16
Use the staff stick
to ensure tiles
work in .
R Hammond / G Turner17
Finish cuts around
outside of window
R Hammond / G Turner18
Complete tiling up
to ceiling
R Hammond / G Turner19
Remove tile baton,
cut and fix base
tile.
R Hammond / G Turner20
Apply tile trim to
window reveals
soffit and sill mitred
in each corner. Tile
window reveals
soffit...
Nächste SlideShare
Wird geladen in …5
×

Window task

474 Aufrufe

Veröffentlicht am

Setting out a window wall ready for Tiling

Veröffentlicht in: Bildung
  • Als Erste(r) kommentieren

Window task

  1. 1. WALL&FLOOR TILING Window Task R Hammond / G Turner
  2. 2. Tools required for the task • Spirit level/Water level • Pencil • Length of wood • Measuring tape • Tile nippers • Notched trowel • Gauging trowel • Tile cutter • Chalk line R Hammond / G Turner2
  3. 3. R Hammond / G Turner3 Using a spirit level check the window reveals for plumb.
  4. 4. R Hammond / G Turner4 Again using a spirit level check the window sill and soffit for level.
  5. 5. R Hammond / G Turner5 Use a measuring tape to find the centre of the window sill and mark using a pencil.
  6. 6. R Hammond / G Turner6 Using a spirit level and pencil to transfer the centre line to the top and the bottom of the wall. Then transfer between the two points with a chalk line
  7. 7. R Hammond / G Turner7 Using the staff stick check the cuts to the reveals and both sides of the wall. Choose which method of centre works best for your wall centre of a tile or a centre of a joint
  8. 8. R Hammond / G Turner8 Using the staff stick check the cuts to the sill and soffit if the cuts are to small adjust the staff stick to suit.
  9. 9. R Hammond / G Turner9 Once position of tiles has been worked out mark the wall on top and bottom of the window using the staff stick with a pencil.
  10. 10. R Hammond / G Turner10 Using the staff stick you can now check the cutting at the ceiling and floor. If these are not suitable start again at the window.
  11. 11. R Hammond / G Turner11 Using water level transfer setting out height around room and mark with chalk line.
  12. 12. R Hammond / G Turner12 You can now use your staff stick to set the tile baton to the nearest whole tile from the floor.
  13. 13. R Hammond / G Turner13 After setting tile batons and plumb lines you are now ready to start tiling
  14. 14. R Hammond / G Turner14 Fix the tiles to window height you can now put plumb lines up both sides of the window this will help when you get to top of the window to ensure gap doesn't close or open up
  15. 15. R Hammond / G Turner15 Continue tiling up both sides of window ensuring tiles are kept plumb and level throughout
  16. 16. R Hammond / G Turner16 Use the staff stick to ensure tiles work in .
  17. 17. R Hammond / G Turner17 Finish cuts around outside of window
  18. 18. R Hammond / G Turner18 Complete tiling up to ceiling
  19. 19. R Hammond / G Turner19 Remove tile baton, cut and fix base tile.
  20. 20. R Hammond / G Turner20 Apply tile trim to window reveals soffit and sill mitred in each corner. Tile window reveals soffit and sill ensure all tiling is flush with tile trim and all the joints line through.

×