More Related Content
Similar to 6710 128 power_point 1_ (20)
More from Gordon Turner (15)
6710 128 power_point 1_
- 1. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 1 of 13
PowerPointpresentation
Setting out a kitchen floor
Unit 128: Set out tiling components
- 2. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 2 of 13
Setting out a kitchen floor
First pick a focal point (this illustration shows the sink wall opposite the
door). Dry lay a tile at each end and strike a datum line (see Activity 7).
- 3. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 3 of 13
Setting out a kitchen floor
Create a 3, 4, 5 right-angled triangle for a width datum line (this
illustration shows this as the centre of the doorway).
- 4. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 4 of 13
Setting out a kitchen floor
Measure out from the first datum line to ensure you have good cuts
everywhere you need to place a cut tile.
- 5. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 5 of 13
Setting out a kitchen floor
Adjust your datum line (as in this illustration), as the cut tile to the door
would be too small.
- 6. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 6 of 13
Setting out a kitchen floor
Check widthways to ensure you have good cuts. This will leave a small
cut to the unit by the door (a cut should not be smaller than one-fifth of
a tile). 300mm x 300mm would be a cut no smaller than 60mm.
- 7. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 7 of 13
Setting out a kitchen floor
Once any adjustments to the datum lines have been made, fix the first
row of tiles. On this floor all the cuts are being left out to fix the
following day.
- 8. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 8 of 13
Setting out a kitchen floor
Continue to fix the full tiles along the two datum lines.
- 9. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 9 of 13
Setting out a kitchen floor
As you approach the door ensure you can reach to fix the last full tiles.
- 10. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 10 of 13
Setting out a kitchen floor
Once all the full floor tiles have been fixed all that is left are the cuts
around the edge.
- 11. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 11 of 13
Setting out a kitchen floor
Normally on the second day you would go in to cut and fix the cut tiles.
- 12. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 12 of 13
Setting out a kitchen floor
Once all the cuts are in and the floor has dried it is time to grout and
finish the floor.
- 13. Level 1 Diploma in Wall and Floor Tiling
© 2013 City and Guilds of London Institute. All rights reserved. 13 of 13
Any questions?