1. 飩∪
REPUBLIC
OF CROATIA
REPUBLIC OF CROATIA
UNIVERSITY OF ZAGREB
FACULTY OF MECHANICAL ENGINEERING
AND NAVAL ARCHITECTURE
DIPLOMA SUPPLEMENT Un粘
評J
This Diploma Supplement model was developed by the European Commission, Council of Europe and uNEsco/cEpEs.
The purpose ofthe supplement is to provide sufficient independent data to improve the international 'transparency'
and fair academic and professional recognition of qualifications (diplomas, degrees, certificates etc.). lt is designed to
provide a description ofthe nature, level, context, content and status ofthe studies that were pursued and successfully
completed by the individual named on the original qualification to which this supplement is appended. lt should
be free from any value judgements, equivalence statements or suggestions about recognition. lnformation in all
eightsections should be provided. where information is not provided, an explanation should give the reason why.
FACULTY OF
MECHANICAL
ENGINEERING
AND NAVAL
ARCHITECTURE
mein ficld(s) ofstudy forthe qualification
n.me.nd st t6 ofemrding insthution
nme md status of institution (if difrerent from aboe)
lmguege(s) of instructim/cxamination
:"FORMA■ON!OFN￢ FYING THE HOLOこ R OF TIIE QuAL:FiCAT10N
Family nameく S)3udan
given namく s)Goran
date,メ aceandCOullwOfЫ tth 30 Ap‖ 11987,Bie10VaL croaJa
studentMentincationnumberorcode 003516o159
INFORMAnON:OEN￢ FV:NC■ HE QUAL:F!CAT10N
nalne ofquaincation and(rap口 icaЫ e)tide COn俺
"do昴
。‖」na:hnguage)sveuこ iliぶ ni prvOstupnik(3accahuに us)i貶enier strolarstvヽ unれ bacc
ing. mech.
Mechanical Engineering, module Computer Aided Engineeri ng
SveuiiliSte u Zagrebu, Fakultet strojarstva i brodogradnje. public
higher education institution. Accreditation for the undergraduate
university study programme in mechanical engineering, naval
architecture and aeronautical engineering issued by the Ministry of
Science, Education and Sports on S October 2oo4. Accreditation for te
extension ofstatus ofscientific organization issued by the Ministry of
Science, Education and Sports on 5 November 2oo7.
Fakultet strojarstva i brodogradnje. -
Croatian
II{FORTATIOT OilTHE LEVEL OFTHE QUALIFICAYION
lmlof qualifietion Undergraduate university programme (first rycle degree), with
bachelor thesis
official lengtlr of prcgnmme Seven semester study programme, at least 2lo ECTS credits
ecess rcquircments(s) Four_year secondary school
INFORUANOf, ON THG CO'{TERTS AND RESULTS CAIilED
modQof study Full-time study
prcgremm€ requirements
plish engineering tasks related to design, development, manufacture, maintenance and has acquired the knowledge and competencies that include:
disposal of products in the field of mechanical engineering. The first year of study is
common to all students, and in the second, students choose one of specialist study pro-
-the
knowledge, understanding and application ofmathematical principles and
grammes. Mandatory courses common to all students provide fundamental knowledge. techniques relevant to the field ofmechanical engineering,
of engineering in order to obtain more comprehensive knowledge out ofthe scope oftheir engineering systems,
specialization. The study programmes also comprise courses pertaining to non-technical
-the
ability to identi!, defne and solve engineering problems of medium complexity,
lasting 4 weeks
-the
ability to plan and to carry out simple projects in accordance with design
requirements and relevant standards,
-the
ability to arry out research using the required methodology and performing a
critical analysis of results,

2. -the
awareness of the interaction between engineering systems on the one hand and the
-the
abilityto use communication and information technologi€s,
society and environment on the other,
-the
awareness ofthe health, safety and legal liability, the social and environmental
-
the abil ity to search I iterature databases an d other sou rces of information, context of engineering solution s and of profess i onal eth ics,
-
the ability to work independently or in a team, -
th e awareness of and read in ess for lifelong learn ing.
-
the ability to present the results orally, in a written form, or by simulations and models,
programme details
€os dat€ of
hours credits examinarion srade subiect *," .:T't" *;tililL" ,.0" .o;.*
I r35 9.o ot/oz/o6 4 Mathematics I ro 45 4.o o2/o7/oB 4 Artificial lntelligence
2 go 7.o zqtozlo6 4 Mechanics I 41 60 4.o 16107/08 5 ComputerAided Manufacturing - CAM
3 45 4.o 10/02/06 3 Materials I qz 5o 5.o oz/ot/o8 3 Design of Tools and Devices
4 75 5.o 21/o2to6 S Computerand Engineering Graphics ez 6o 4.o 18/o7/o8 4 Numerical Methods in Mechanical
s 30 3.o lsloslo6 2 Sociology Engineering
6 30 2.o + General English I - optional 44 r8o r.o + lndustrial Practice I
7 30 r.o + Physical Exercise I as 5o 5.o oq/o7/o8 5 Knowledge Management
8 30 2.o + lntroductiontoTechnology 46 30 3.o o2to7log 3 Technical EnglishlV-Mechanical
s ro5 7.o 271c,5/06 5 Mathematics ll Engineering
ro 75 6.0 22los/o6 2 Mechanics ll r7 45 4.o oz/os/o8 3 Basic of Lifting and Conveying Machinery
il 75 6.0 04/07/06 4 StrengthofMaterials +a 6o 5.o 4toltos 4 ProductionSystemPlanning
rz 6o 5.o 211c,61c,6 4 Materials ll +e 45 4.o og/ozlos 4 Numerically Controlled Machine Tools
r:. 6o 5.o 26to6to6 3 ComputerAided Design so 75 7.o 12to1tos S Machining Systems
14 30 2.o + GeneralEnglishll-optional sr 30 2.o 21/o1toe S lndustrialDesign
rs 30 i.o + PhysicalExercisell sz 6o 4.o z6/ozloe FinalProjectoftheUndergraduateStudy
re 5o 5.o 2s/o1lo7 4 Technology t s3 45 4.o Bloz/og 5 Software Engineering
17 45 3.o 2olo2lo7 5) Programming and Algorithms s4 30 3.o oqlozlos 3 Politics and Propaganda in the zoth century
rs 6o 5.o 06/02/07 S Mathematics lllA
re 75 6.0 ulo+/o7 4 Design Elements I A rddition.lEos(redits
zo 6o 5.o 2oto4to7 4 lntroductiontoThermodynamics
21 45 3.o o2lo2lo7 4 Product Development
22 30 1.o + Physical Exercise lll
23 30 2.o + Technical English I - Mechanical Engineering
za 6o 5.o 26/o6to7 4 Technology ll
zs 6o 5.o 06/07/07 4 Electrical Engineering and Electrical
Machines
26 45 4.o o4to7/o7 4 Computer Networks
27 45 3.o o2/o7/o7 4 Computational Mathematics
28 45 4.o 28to6/o7 4 Elements of Dynamics of Mechanical
5ystems
2e 30 l.o + Physical Exercise lV
30 75 6.0 os/o7to7 3 Design Elements ll C
3r 30 2.o + Technical English ll - Mechanical
Engineering
Ez 6o 6.o ylozlo8 Automatic Control
:: 6o 4.o oq/oz/o8 4 Measurement Theory and Techniques
:+ 5o 5.o o6lo2tor S Fluid Mechanics
3s 45 4.o os/o2lo8 5 Product lnformation Modelling
ee 6o 5.o rolo3/o8 5 ComputerAided Design - CAD
z7 45 4.o os/o9lo8 5 WEB Programming
38 45 4.o lt/oz/o8 3 Advanced NDT Methods
3e 30 2.o + Technical English lll - Mechanical
Engineering
totelecrscredfu 22o
beginning ofthe study+nd ofthe study r October zoo5-25 February 2oo9
diploma numbd 349
gnduationthesis;mentor;defendedon PDF lnteractive 3D Structural Models Cenerated using Scriptrunner;
Prof. Mario Essert, PhD; z6 February zoog

3. gndingschemeend,ifavailable,gradedistributionguidance The student's success at an exam, a preliminary exam or any specific
type ofassessment is graded byfive grades and their numerical equiv-
alents: excellent (5), very good (4), good (3), sufficient (z) and insuffi-
cient (r). The grade "insufficient (r)" is not a passing grade. With written
exams, absolute grading is applied, i.e. the number of acquired points
with respect to the required minimum for acertain grade is expressed.
The grades assigned through preliminary exams are created on the ba-
sis of individual grades for each preliminary exam. The grade assigned
through a specific type ofassessment is determined on the basis of
grades assigned for completed tasks. Some courses are not graded, and
the fact that all obligations have been fulfilled is marked by the "+,' sign
in the attested copy ofgrade-sheets.
overallclassificetion ofthe qualification Cummulative grade point average: 4.089
INFORMATION ON THE FUNCTION OFTHE QUALIFICATION
.ccesstofurtherstudy Uponthecompletionoftheundergraduateuniversitystudyprogramme
student can apply for admission to graduate university programmes or
special i st professional g rad uate prog rammes.
profesrionalstatus The holder ofthis qualification is entitled to bear the legally protected
academic title of Bachelor in Mechanical Engineering (Univ. Bacc. lng.
Mech.), to exercise professional work and to solve engineering tasks of
medium complexity in the field of mechanical engineering. The study
programme is based on the fundamental knowledge of: engineering
mathematics, computer science and computer graphics; engineering
physics, materials and technologies; machine elements and structures;
design, organization and control ofengineering systems and processes.
The holder of this qualification has acquired the knowledge and skills
required for the work in industry and entrepreneurship; the future em-
ployment of the degree holder is not necessarily limited to the field of
mechanical engineering.
edditional information
forther infomation srurce Republic ofCroatia, Ministry ofScience, Educarion and Sports, http://
wvw.mzos.hr; University of Zagreb, http://www.unizg.hr; Faculty of
Machanical Eng i neeri ng and Naval Architectu re, http ://www.fsb. hr
plae md date
Zagreb, 3 June zorr
z.r apacity
Dean
nme tnd
奮馳つ
脳iぁ ず■Itt ξ_′
勒 さ籠亀駒
Э 鬱

4. 8
l.l Types ofinstitutions
uNrvERsrr Es (sveuii/i5to) are institutions of h iqher education which offer university study
programmes in at least two research areas and/or art areas covering a number of disci-
plines. Exceptionally, universities may also offer vocational study programmes. Universities
may be comprised of constituent units which are legal entities and which are called rrcur-
IEs (fokulteti) or ARrrcrotur es (um.ietriike okodeml.l-e). Universities and their constituent
units offer study programmes, and engage in research and other professional and art-relat-
ed work-
poLyrEcHNrcs (veleufi/iito) and scHoors oF vocATroNAL HToHER EDUCATToN (visoke ikole)
are higher education institutions which offer vocational study programmes. The two types
of institution differ in the range of programmes they offer: polytechnics are institutions of
vocational higher education which offervocational study programmes in three or more dis-
ciplines. Their mission is to offer career-oriented programmes, which often include practical
work experience.
Public universities are established by law; public polytechnics and schools ofvocational
higher education are established by a decree ofthe Croatian Government; private higher
eduation institutions are established by the founder.
Types of prcgrmmes
uNrvERsny sruDy pRoGRAMMEs prepare students for work in research and higher education
institutions, as well as in private and public sectors. students in these programmes receive
an educat;on that enables them to develop and use scholarly and professional knowledge at
the appropriate level.
vocATroNAL sruDy pnocnluves provide students with a career-ready level ofknowledge,
skills and competences required for work in specific vocations.
Accreditation ofhigher eduetion insthutions and study prcgnmmes
Higher education institutions (HEls) and their study programmes are subject to an evalua-
tibn process in order to get accreditation. The request for accreditation is submitted to the
Ministry in charge ofhighereducation, which then requests an evaluation from the National
Council for Higher Education (NcHE). The Ncxe appoints an expert committee which, in
cooperation with the Agenryfor Science and Higher Education, performs the evaluation and
submits a report. A draft repon is thdn sent to the HEI for feedback and clarifications. The
National Council makes a final evaluation ofthe proposed study programme or ofthe higher
education institution and recommends to the minister issuance or denial ofaccreditation.
Organisation of univenityr study prcgnmmes
Since zoo5, all study programmes in Croatia merure student work load in eqrs credits. A
student is typically required to earn 60 Ecrs credits in one academic year.
uNrvERsrry UNDERcRADUATE pRocRAMMEs
- FrRsr cycLE (preddiplomski sveufiliSni studij)
normally take three years in which students are required to earn r8o ecrs credits. A minority
of undergraduate university programmes in Croatia are offered as four-year programmes in
which students are required to earn z4o ecrs credits. Upon completion students are award-
ed a diploma (svjedodZbo) and the academic degree of University Bachelor (sveudili3ri pr-
vostupnik) with an indication ofthe field ofstudy. Students graduating in technical sciences
receive the academic degree of University Bachelor in Engineering (weudiliSni pruostupnik
in2enfer) with an indication ofthe field ofstudy.
Students holding a first rycle university degree can apply for admission to university gradu-
ate programmes or vocational specialist graduate programmes, or enterthe workforce.
uNrvERsrryoRADUATE pRocRAMMEs-sEcoND cyclE (dip,omskisveuCililnistudi) normally
take two years in which students are required to earn rzo ecrs credits. A minority of grad-
uate progammes in Croatia are offered as one-year programmes in which students are re-
quired to earn 60 Ecrs credits. Th€ total number of credits earned in the first and second
rycle progrmmes must be at least 3oo. Upon completion students are awarded a diplomo
and the academic degree of Master of (mogistor struke) with an indication ofthe field of
study. Students graduating in technical sciences receive the academic degree of Master in
Engineering (mogistor inlenjer) with anindication of the field of study.
Students holding a second cycle university degree can continue their studies in university
postgraduate programmes or enter the workforce.
I NTECRATED UNOERGRAOUATE AND GRADUATE UNIVERSITY PROCRAMMES _ FIRST AND SEC-
oNo cycLEs (integrioni preddiplomski i diplomski sveuciliSni studfl normally take five or
six years in which students are required to earn 3oo or 360 Ecrs credits respectively. Upon
completion students are awarded a diplomo and the academic degree of Master of (mogis-
tor struke) with an indication ofthe field ofstudy. Upon completion of integrated first and
second rycle programmes in medicine, dentistry and veterinary medicine students receive
the academic degree of Doctor (doktor struke) with an indication ofthe field of study (e.9.
Doctor of Medicine, etc.)
Students with this degree can continue theirstudies in universitypostgraduate programmes
or enter the workforce.
uNrvERsrrY PosrcRADUArE PRocRAMMEs-rHrRD cycLE (posliediplomski sveufiliSni studi)
normally take three years. Upon completion students are awarded a diplorno and the aca-
demic degree of Doctor of Philosophy (or Doctor scientarum), or Doctor of Fine Art (dokor
znonosti or doktor umjetnostl), with an indication oftheacademic field or art form.
uNrvERsrTY spEclALrsr PosTcRADUATE PRooRAMMEs (poslriediplomski sveutiliSni specijoli'
stiaki studii) normally take one to two years. Upon completion students receive a diplomo
and the academic degree of University 5pecialist (sveuii/i5ni specllo/ist) with an indication
ofthe field ofstudy.
Organisation of voetional study prcgmmmes
sHoRr cYcLE vocATroNAL sTUOY PROGRAMMES (Strufni studl) normally take two or
twoand- a-halfyears, in which students are required to earn between r20 and r50 ECrs cred-
its respectively. Upon completion students receive a diploma (svjedodZbo) and a Short-Cy-
cle Vocational Degree (struini pristupnik) with an indication ofthe field ofstudy.
Students holding a short-cycle vocational degree can apply for admission to higher levels of
vocational study programmes, or enter the workforce.
vocAroNAL uNDERGRADUATE pRoGRAMMEs
- FrRsT cYcLE (struini preddiplomski studij)
normally take three years in which students are required to earn r80 Ecrs credits. A minority
ofvocational programmes in Croatia are offered as four-year programmes in which students
are required to earn 24o ecrs credits. Upon completion students are awarded a diploma
(svjedodibo) and the vocational degree of Vocational Bachelor (struini pruostupnik) with
an indication of the field of study. Students graduating ;n technical sciences receive the
vocational degree ofVocational Bachelor in Engineering (struini pruostupnikinienjer)with
an indication ofthe field ofstudy.
5tudents holding a first rycle vocational degree can apply for admission to vocational spe-
cialist graduate programmes, or to second rycle university graduate programmes under con-
ditions determined by the university, or to enter the workforce.
vocATroNAL spEcrALrsr cRADUATE pRocRAM MEs - sEcoNo cycre (strudni drplomski speci-
iolistiiki studi, normally take two years in which students are required to earn rzo ecrs cred-
its. A minority ofvocational specialist graduate programmes in Croatia are offered as one-
year programmes in which students are required to earn 6o ecrs credits. The total number
ofcredits earned in first and second cycle programmes must be at least 3oo. Upon comple-
tion ofvocational specialist graduate programmes students are awarded a diploma and the
vocational degree ofVocational Specialist (struCni specijolist) with an indication ofthe field
of study. Students graduating in technical sciences receive the vocational degree ofVoca-
tional Specialist in Engineering (struinispecijolistinienjer)with an indication ofthe field of
study, and students graduating in the fields of medicine, dentistry or veterinary medicine
receive a diploma vocational degree (diplomirori) with an indication ofthe field of study.
Students holding a second cycle vocational degree can enter the workforce, or they can also
apply, underconditions determined by universities, fortransfertoa universitydiploma study
programme (with the proviso oftaking differential exams) and admission to a university
postgraduate programme.
Educational requircments for rdmission into study progremmes
Higher education institutions independently set the min;mum educational requirements
for admission to university undergraduate programmes and first rycle vocational pro-
grammes. Normally, the minimum requirement for admission to university undergraduate
programmes is completion ofa four-year secondary school; the minimum requirement for
enrolment into first cycle vocational programmes is completion ofa three- orfour-year sec-
ondary school.
The admissions process to first cycle study programmes at Croatian universities is normally
based on secondary school grades and an entrance examination. Each constituent unit of
a university usually carries out its own entrance examination.'The admissions process to
first cycle prognmmes at polytechnics and schools of vocational higher education is also
based on secondary school grades and sometimes an entrance examination, but the use of
the latter is less common than in the case ofuniversities.
The minimum educational requirement for enrolment in university graduate programmes
is completion of a university undergraduate programme. Universities can allow students
with a higher education vocational degree to enrol in university graduate programmes under
specially defi ned requirements.
The minimum educational requirement for enrolment in vocational specialist graduate pro-
grammes is completion of a university undergraduate programme or a vocational pro-
gramme (first rycle). The minimum educational requirement for enrolment in university
postgraduate programmes is completion ofa specific Araduate programme. Normally, the
requirement for enrolment in a university postgraduate programme is completion ofa uni-
versity graduate programme. Students who have completed pre-Bologna undergraduate
programmes lasting at least four academic years (sveuEiliini dodiplomski studi) can apply
for admission to Bologna postgraduate programmes as well.
Grading scale
The Croatian national grading scale consists offive gmdes with numerical equivalents:
izvrston-5 (excellent); vrlodobor-q (verygood); dobar-3(good);dovoljon-z(suffi-
cient); nedovoljon -r (fail). The minimum passing grade is z (sufficient).
・︱
︰
む
コ〓
ゝ∃
燃
む
モ
ダ
一５
一Ｅ
ｏ焉
υ９
university undergraduate programme;
3-4 years; Univesity Bachelor
university postgraduate programme;
3 yeatr; Doctor ofPhilosophy/Doctor ofFine Arts
integrated undergraduate and gnduate university programme;
5-6 yea6; Master/ Doctor of...
univ€rsity specialist postgaduate prognmme;
r-z years; University 5pecialist
voetional undergnduate programme;
>3 years; Vcational Bachelor
voetional specialist graduate programme;
r-2 years; Voadonal Specialist
university graduate programme;
r-2 years; Master of...