SlideShare ist ein Scribd-Unternehmen logo
1 von 12
Downloaden Sie, um offline zu lesen
Robustness Assessment of a Steel Truss Bridge
P. Olmati1
, F. Brando2
and K. Gkoumas1
1
School of Engineering, Sapienza University of Rome, Via Eudossiana 18, 00184,
Rome, Italy; PH +39-06-44585.265; FAX +39-02-30136014; email:
pierluigi.olmati@uniroma1.it; konstantinos.gkoumas@uniroma1.it
2
Thornton Tomasetti, 51 Madison Ave, New York, ST 10010-1603; PH (917) 661-
7800; FAX (917) 661-7801; email: FBrando@thorntontomasetti.com
ABSTRACT
This study focuses on the robustness assessment of a steel truss bridge. In
the first part, a brief overview of several robustness indexes found in literature is
provided, together with the principal approaches on the topics of structural
robustness, collapse resistance and progressive collapse. In the second part, the
extensively studied I-35W Minneapolis steel truss bridge is used as a case study for
the application of a consequence-based robustness assessment. In particular, focus is
given on the influence that the loss of primary elements has on the structural load
bearing capacity.
INTRODUCTION
Structural robustness is a research topic particularly relevant in the design
and the safety assessment of both new and existing structures. The latter are prone
not only to local failure due to accidental or man-made attacks, but also due to long
term material degradation (e.g. corrosion), bad design or construction. Behind this
attention, there is the increasing interest from society that cannot tolerate death and
losses as in the past. This is more evident after:
· recent terrorist attacks (a series of terror attacks in America and beyond, the
deadliest being the September 11, 2001 attacks);
· recent bridge collapses due to deterioration or bad design or bad construction
(for example, the De la Concorde overpass collapse in Montreal, 2006).
· recent multiple hazard events from natural sources the most significant of
which was the 2011 earthquake, off the Pacific coast of Tōhoku.
Steel truss bridges in particular, in their various forms, very common
worldwide, are now aged, not often optimally maintained, and need to be checked
both for safety and serviceability.
Considering what said above, aim of this paper is to apply to a steel truss
bridge, a methodology for the robustness assessment that, among else, takes into
account the consequences of unexpected actions on or unforeseen events (England et
al. 2008) on structures, with a special focus on the effect of the loss of primary
elements on the structural load bearing capacity.
250Structures Congress 2013 © ASCE 2013
STRUCTURAL ROBUSTNESS AND PROGRESSIVE COLLAPSE
A variety of terms have been used in literature, however, typically
robustness is defined as the “insensitivity of a structure to initial damage” and
collapse resistance as the “insensitivity of a structure to abnormal events” (Starossek
and Haberland, 2010). Similarly, ASCE 7-05 (2005), defines progressive collapse as
the spread of an initial local failure from element to element, eventually resulting in
collapse of an entire structure or a disproportionately large part of it. Starossek and
Haberland (2010) focus on the differences of progressive and disproportionate
collapse, concluding that the terms of disproportionate collapse and progressive
collapse are often used interchangeably because disproportionate collapse often
occurs in a progressive manner and progressive collapse can be disproportionate.
A review of international research on structural robustness and
disproportionate collapse is provided in Arup (2011). Arangio et al. (2011) and
Sgambi et al. (2012) provide a dependability framework adapted from the electronic
engineering field, where dependability attributes are either related to structural safety
or serviceability. Potential failure scenarios specific for bridges are provided in
FHWA (2011), within a framework aiming at the resilience improvement. Giuliani
(2012) identifies the design strategies for obtaining robustness, using prevention and
mitigation measures. An additional aspect is the inherent uncertainty associated with
actions and mechanical, geometric and environmental parameters cannot be ignored
since they affect the structural response (Petrini and Ciampoli, 2012).
Structural robustness assessment methods. A relevant issue related to the
structural robustness evaluation, is the choice of appropriate synthetic parameters
describing for example the sensitivity of a damaged structure in suffering a
disproportionate collapse.
Eurocode 1 (EN 1991-1-7 2006) merely outlines the issue of structural
robustness in a qualitative manner, stating that a structure should not be damaged by
events to an extent disproportionate to the original cause. Several authors provide a
review of methods for assessing structural robustness (Canisius et al. 2007; Starossek
and Haberland, 2010; COST, 2011; Sørensen et al. 2012; Parisi and Augenti 2012;
Cavaco et al. 2013). In what follows a non-exhaustive overview of approaches for
the robustness assessment is provided, focusing on the proposed indexes.
Ellingwood and Dusenberry (2005), link the progressive collapse probability
P(F) to a chain of probabilities, consisting in (i) the hazard of an abnormal event
P(H), (ii) the local damage as a consequence of this hazard P(D│H), and (iii) the
failure of the structure as a result of the local damage D due to H P(F│DH).
P(F)= P(F│DH)·P(D│H)·P(H)
Baker et al. (2008) propose a probabilistic framework for the robustness
assessment, computing both direct risk, associated with the direct consequences of
potential damages to the system, and indirect risk, corresponding to the increased
risk of a damaged system. The latter corresponds to the robustness of the system,
since it can be assumed as a risk from consequences disproportionate to the cause of
251Structures Congress 2013 © ASCE 2013
the damage. In their approach, a robust system is considered to be one where indirect
risks do not contribute significantly to the total system risk.
IndDir
Dir
Rob
RR
R
I
+
=
The index takes values from 0 (if all risk is due to indirect consequences) to
1 (if there is no risk due to indirect consequences, thus, the system is completely
robust).
Biondini and Restelli (2008) propose a robustness index (ρ) associated with
the displacements of the system:
d
o
s
s
=ρ
Where s0 is the displacement vector, ║·║ denotes the Euclidian norm, and the
subscript “0” and “d” refer respectivelly to the intact and damage state of the
structure.
Izzuddin et al. (2008) propose a multi-level framework for the progressive
collapse assessment of building structures subject to sudden column loss. The
proposed assessment framework utilizes three main stages: (i) nonlinear static
response of the damaged structure under gravity loading; (ii) simplified dynamic
assessment to establish the maximum dynamic response under sudden column loss;
and, (iii) ductility assessment of the connections. Within this framework, they
propose that the single measure of structural robustness is the system pseudo-static
capacity, that is the maximum value of the nonlinear static resistance for which the
resulting maximum dynamic displacement, is less than or equal to the ductility limit.
The comparison of the latter against the applied gravity loading establishes the
required limit state.
Cavaco et al. (2013) consider robustness as the measure of degree of
structural performance lost after damage occurrence, and propose the following
metric (Rd: Robustness Index).
∫
=
=
=
1
0
)(
d
d
d dxxfR
Where Rd indicates the area above the curve defined by the normalized structural
performance f (given by the ratio between the structural performance on the intact
and damage states), subjected to a normalized damage d (given by the ratio between
actual and maximum possible damage).
Nafday (2011) discusses the usefulness of consequence event design, for
extremely rare, unforeseen, and difficult to characterize statistically events (black
swans). In this view, the author, with reference to truss structures, proposes an
252Structures Congress 2013 © ASCE 2013
additional design phase that focuses on the robustness, the damage tolerance and the
redundancy of the structure. This proposed metric consequence factor Cf
i
for the i-th
member is based on the evaluation of the determinants of the normalized stiffness
matrixes for the undamaged and damaged structure and is defined as:
N
i
Ni
f
K
K
C =
Where |KN| is volume of the geometrical shape which is spanned by the vectors of
matrix KN for ‘intact condition’ and |KN
i
| is similar volume under ‘damaged
condition’ i.e., after the removal of the i-th member.
The robustness, ultimate strength and progressive collapse susceptibility of
steel truss structures and bridges has been the subject of recent research. Xu and
Ellingwood (2011) apply a method of energy-based nonlinear static pushdown
analysis on steel frames. Gerasimidis et al. (2012) apply a methodology loosely
based on the alternate load path method and obtain robustness measure for geometric
irregular steel frames that have the advantage of being comparable. Choi and Chang
(2009), focus on the vertical load bearing capacity of truss structures, using a
sensitivity index that accounts for the influence of a lost element to the load bearing
capacity. Miyachi et al. (2012) focus on how the live load intensity and distribution
affect the ultimate strength and ductility of different steel truss bridges, similar to the
one considered in this study. Malla et al. (2011) conduct nonlinear dynamic analysis
for the progressive failure assessment of bridge truss members, considering their
inelastic post-buckling cyclic behavior. Saydam and Frangopol (2011) use FE skills
to investigate the vulnerability, redundancy and robustness of truss bridges, taking
into account the stochastic time-dependent deterioration of the structure.
What emerges from the above is the difference in the approaches and
indexes in literature towards the structural robustness quantification. An overview is
provided in Table 1.
Table 1. Overview of robustness approaches.
Robustness
Approach Index
- property of the structure or
property of the structure and
the environment
- static or dynamic
- linear or non-linear
- deterministic or probabilistic
Member consequence factor and robustness assessment. Focusing on skeletal
structures (e.g. trusses), current member-based design in structural codes does not
explicitly consider system safety performance during the structural design, while the
level of safety in new designs is usually provided on the basis of intuition and past
experience (Nafday, 2008). On the other hand, the Ultimate Limit State (ULS) of the
Performance-Based Design (PBD) requires that individual structural members are
designed to have a resistance (R) greater than the load action (E), where both R and
E are probabilistically characterized (Stewart and Melchers, 1997).
253Structures Congress 2013 © ASCE 2013
The member-based design is summarized in the following design expression,
valid for a single structural member:
0ER undamaged
d
undamaged
d ≥− (1)
where Rd
undamaged
and Ed
undamaged
are the design values respectively of the resistance
and of the solicitation (EN 1990 2002) in the undamaged configuration of the
structure. Concerning the commonly implemented standards this equation is not
respected with a probability of 10-(6÷7)
. The method applied here aims to introduce an
additional multiplicative coefficient in the first term of the Eq. (1): this is identified
as the member consequence factor (Cf), takes values within a range from 0 to 1, and
quantifies the influence that a loss of a structural element has on the load carrying
capacity. Essentially, if Cf tends to 1, the member is likely to be important to the
structural system; instead if Cf tends to 0, the member is likely to be unimportant to
the structural system. Cf provides to the single structural member an additional load
carrying capacity, in function of the nominal design (not extreme) loads. This
additional capacity can be used for contrasting unexpected and extreme loads.
0ER*)C1( undamaged
d
undamaged
d
scenario
f ≥−− (2)
Nafday (2011) provides Eq. (2) in a similar manner, with the only difference
being on the range mean of Cf that is the inverse of the proposed one, so the first
term of Eq. (2) is multiplied directly by Cf. Thus, in this study the equation proposed
by (Nafday 2011) has been slightly revised in order to fit with the here proposed
expression of the Cf - see both Eq. (2) and Eq. (3). The structure is subjected to a set
of damage scenarios and the consequence of the damages is evaluated by the
consequence factor (Cf
scenario
) that for convenience can be easily expressed in
percentage. For damage scenario is intended the failure of one or more structural
elements.
Considering the above, robustness can be expressed as the complement to
100 of Cf
scenario
, intended as the effective coefficient that affects directly the
resistance - see Eq. (2). Cf
scenario
is evaluated by the maximum percentage difference
of the structural stiffness matrix eigenvalues of the damaged and undamaged
configurations of the structure.
N1i
un
i
dam
i
un
iscenario
f 100
)(
maxC
−=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
λ
λ−λ
= (3)
where, λi
un
and λi
dam
are respectively the i-th eigenvalue of the structural stiffness
matrix in the undamaged and damaged configuration, and N is the total number of
the eigenvalues.
The corresponding robustness index (Rscenario
) related to the damage scenario
is therefore defined as:
254Structures Congress 2013 © ASCE 2013
scenario
f
scenario
C100R −= (4)
Values of Cf close to 100% mean that the failure of the structural member
most likely causes a global structural collapse. Low values of Cf do not necessarily
mean that the structure survives after the failure of the structural member: this is
something that must be established by a non-linear dynamic analysis that considers
the loss of the specific structural member. A value of Cf close to 0% means that the
structure has a good structural robustness.
Some further considerations are necessary. The proposed method for
computing the consequence factors should not be used 1) for structures that have
high concentrated masses (especially non-structural masses) in a particular zone, and
2) for structures that have cable structural system (e.g. tensile structures, suspension
bridges).
The first issue is related to the dynamic nature of a structural collapse, since
Eq. (3) does not take into account the mass matrix of the system that is directly
related to the inertial forces. It is possible to accept this limitation only if the masses
are those of the structural members, thus distributed uniformly. Moreover there is no
way to consider any dynamic magnification phenomena with Eq. (3).
The second issue is related to the geometrical non-linearity of cable
structures. For such structures the stiffness matrix is a function of the loads,
something not accounted for in the elastic stiffness matrix. Moreover for the nature
of the elastic stiffness matrix, eventual structural dissipative behaviors and non-linear
resistive mechanisms (e.g. catenary action) are not taken into account.
In the authors’ opinion the above limitations can be accepted if the desired
outcome is a non-computational expensive method, since the Cf value provides an
indication of the structural robustness in a quick and smart manner. Thus, the Cf as
expressed in Eq. (3) can be used primarily as an index to establish the critical
structural members for the global structural stability, or to compare different
structural design solutions from a robustness point of view. The latter implementation
of Cf can be helpful for the robustness assessment of complex structures, such as
wind turbine jacket structures (Petrini et al. 2010), since it provides an indication on
the key structural elements that in a complex structure are of difficult evaluation.
The method applied in this study aims at increasing the collapse resistance of
a structure, by focusing on the resistance of the single structural members, and
accounting for their importance to the global structural behavior consequently to a
generic extreme event that can cause a local damage. Moreover, the method is
particularly helpful for unpredictable events that by definition are not possible to take
into account in the design phase. This does not mean that the collapse resistance is
accounted only for the single member resistance, because the authors intend, as a
design philosophy, to increase the resistance of the single members in addition to the
structural stability analysis that provide the assessment of the global structural
behavior.
Thus, this method neglects the “load characterization” of the extreme load
since it is considered unpredictable, and it is complementary to the so-called threat
independent stability analyses (DoD, 2009).
255Structures Congress 2013 © ASCE 2013
APPLICATION ON A STEEL TRUSS BRIDGE
This section focuses on the robustness assessment of a steel truss bridge
using the member consequence factor method. The bridge used as a case study is the
I-35 West Bridge in Minneapolis. The I-35 West Bridge was built in the early 1960s
and opened to traffic in 1967. The bridge spanned across the Mississippi River,
Minneapolis and it was supported on thirteen reinforced concrete piers and consisted
of fourteen spans. Eleven of the fourteen spans were approach spans to the main deck
truss portion. The total length of the bridge including the approach and deck truss
was approximately 580 meter (1,907 feet). The length of the continuous deck truss
portion which spanned over four piers was approximately 324 meter (1,064 feet).
The elevation of the deck truss portion of the bridge is shown in Figure 1.
Figure 1. Bridge overview (edited from MnDOT).
The deck truss portion of the bridge was supported on a pinned bearing at
Pier 7 and roller bearings at the other three supports. The main bridge trusses were
comprised of built-up welded box and I-sections sandwiched by gusset plates at each
panel point. The collapse which occurred on August 1st 2007 was probably due to a
combination of the temperature effect, roller bearings condition, and increased
gravity loads on the bridge prior to collapse. For this functionally non-redundant
bridge the initial buckle at the lower chord member close to the pier and local plastic
hinges in the member resulted in global instability and collapse (Malsch et al. 2011).
The bridge has been thoroughly studied by Brando et al. (2010) focusing on
the issues of redundancy, progressive collapse and robustness. Studies have been
conducted in order to assess the effect of the collapse of specific structural
components (Crosti and Duthinh, 2012), while Crosti et al. (2012) performed non-
linear dynamic analysis on specific damage scenarios.
For computing the consequence factors and the robustness index of the
structure for the selected damage scenarios a FE model of the structure is necessary.
Figure 2 shows the three-dimensional FE model of the I-35 West Bridge built using
the commercial FE solver Sap2000®
(Brando et al. 2010).
Both shell and beam finite elements are used in the FE model. The bridge
superstructure and both the deck girders and beams are built using beam elements,
while, the concrete deck is modeled using shell elements. Moreover, contact links
connect the deck with both the deck girders and beams. In accordance to the original
blueprints of the I-35 West Bridge (MnDOT 2012), standard and non-conventional
beam cross sections are implemented in the model.
3 Span Continuous Trusses – 1,064 ft
Pier 7 Pier 6
North
Pier 8 Pier 5
256Structures Congress 2013 © ASCE 2013
Figure 2. 3D FE model of the I-35 West Bridge.
From this model a simplified (plane) FE model is extracted and is adopted
for computing the structural stiffness matrix in both the damaged and undamaged
configurations. This choice has mostly to do with computational challenges in
computing the stiffness matrix for the full model. Regarding the structural
decomposition of complex structures it is possible to refer to the Bontempi et al.
(2008) and Petrini and Bontempi (2011).
The expression of the consequence factor provided by Eq. 4 refers to the
eigenvalues of the elastic stiffness matrix. The choice to use a simplified model is
also justified and feasible since Eq. 4 is independent from the mass of the structure.
Eq. 4 is also independent from the loads, so the loads in the FE model are not
considered. The concrete deck is only simply-supported by the bridge superstructure,
so the concrete deck is not considered in the analyses and it is omitted in the model,
consequently, the contact links are deleted as well. The deck girders and beams are
also omitted since they do not have a strong influence to the load bearing capacity of
the bridge. The two trusses of the bridge superstructure are similar and connected by
a transverse truss structure, so the analyses focus on a single truss; at this point one
plane truss is obtained from the three-dimensional model, in order to have a two-
dimensional FE model, implemented for computing the stiffness matrix in both the
damaged and undamaged configurations.
Concluding, only a single lateral truss of the bridge is considered, and a set
of damage scenario is selected (Figure 3).
Figure 3. Lateral truss of the bridge and selection of damage scenarios.
The damage scenarios for this application are not cumulative, so only a
single member is removed from the model for each damage scenario. In this
6
7
2
1
3
4
5
257Structures Congress 2013 © ASCE 2013
application the scenarios chosen focus on the area recognized as initiating the
collapse according to forensic investigations (Brando et al. 2013).
With the aim of increasing the structural robustness of the bridge, and in
order to test the sensitivity of the method proposed, an improved variation of the
structural system is considered. In this case (Figure 4) the updated bridge truss is a
hyper-static steel truss structure.
The results of both the original and the enhanced structural schemes, under
the same damage scenarios, are shown in Figure 5.
Figure 4. Updated lateral truss of the bridge and selection of damage scenarios.
The proposed robustness index (based on the member consequence factor Cf)
captures both the lack of robustness of the I-35 W Bridge, and its robustness
enhancement as a consequence of increasing the redundancy of the structure.
Figure 5. Damage scenario evaluation.
Generally speaking, it can be observed that the case-study bridge shows a
low robustness index. This is due to the fact that it is (internally) statically
determined. From the analysis of the bridge in its original configuration and for the
chosen damages configurations, a consequence factor of 0.77 has been computed for
6
7
2
1
3
4
5
37
59
42 45
35 38
23
63
41
58 55
65 62
77
0
20
40
60
80
100
1 2 3 4 5 6 7
Robustness%
Damage Scenario
Cf max Robustness
83 87 88
53
60
86
64
17 13 12
47
40
14
36
0
20
40
60
80
100
1 2 3 4 5 6 7
Robustness%
Damage Scenario
Cf max Robustness
258Structures Congress 2013 © ASCE 2013
the DS7 and, consequently, a robustness index of 0.23 is obtained.
The consequence factors obtained by the analysis of the various damage
scenarios can be used, as shown in Eq. (2), for the re-sizing of the structural elements
In this case the structural scheme of the bridge does not change with respect to the
original one and this option can be considered as a local (element-based)
improvement of the structural system. In alternative, the consequence factor can be
used only as a robustness performance index, without making use of Eq. (2). More
than one structural configuration can be examined in order to assess which is the best
solution in terms of Cf. An example of this strategy is given in the application of
Figure 4. In the examined case the consequence factor obtained by the DS7 decreases
from 0.77 to 0.36; this appreciable result is probably due to the position of the failed
element in the DS7, which, being a lower element of the truss plays an important role
in the load carrying capacity of the original system. Generally speaking, the
redundant bridge configuration (Figure 4) shows certain insensitivity to the internal
damage scenarios (number 1, 2 and 3). This option can be considered as a global
improvement of the structural system. The previous strategies can be adopted
simultaneously: i) the designer-sizing of the elements can be affected by the
robustness index by using Eq. (2); and ii) the structural scheme can be changed (also
on the basis of the Cf values) in order to increase the robustness. In this case, both
local and global solutions provide improvements to the structural system.
CONCLUSION
Some brief considerations can be made on the findings for the specific
application. The proposed metric seems to be promising for the robustness
assessment of a complex structural system, and could be used as tool for localizing
critical areas in the design, analysis and investigation phases. Furthermore,
comprehensive assessments that consider a larger set of damage scenarios can be
performed by implementing this method using appropriate search heuristics.
Limitations of the implemented method arise from the fact that in the analyses a
reduced structural system is used. In this sense, findings can be considered as merely
preliminary, and have to be verified using complete models and advanced numerical
analyses. Finally, an improved expression of the Cf could be obtained by considering
both the stiffness and mass matrix of the structure and the plasticity of the elements.
REFERENCES
Arangio S., Bontempi F., and Ciampoli M. (2011). "Structural integrity monitoring
for dependability". Struct. Infrastruct. E., 7(1), 75-86.
Arup (2011) Review of international research on structural robustness and
disproportionate collapse, London: Department for Communities and Local
Government.
ASCE 7-05 (2005) Minimum design loads for buildings and other structures,
American Society of Civil Engineers (ASCE).
Baker J. W., Schubert, M., and Faber M. H. (2008). “On the assessment of
robustness”. Struct. Saf. 30(3),253–267.
259Structures Congress 2013 © ASCE 2013
Biondini, F., Frangopol, D. M., and Restelli, S. (2008). “On structural robustness,
redundancy and static indeterminancy”. Proc. of the 2008 Structures
Congress, April 24-26, 2008, Vancouver, BC, Canada.
Bontempi, F., Gkoumas, K., and Arangio, S. (2008). “Systemic approach for the
maintenance of complex structural systems”. Struct. Infrastruct. E., 4(2), 77-
94.
Brando, F., Testa, R.B., and Bontempi, F. (2010). “Multilevel structural analysis for
robustness assessment of a steel truss bridge”. Proc. of the 5th IABMAS
Conf., Philadelphia, USA, 11-15 July 2010.
Brando, F., Iannitelli, A., Cao, L., Malsch, E.A., Panariello, G., Abruzzo, J., and
Pinto, M.J., (2013). “Forensic Information Modeling: a new forensic tool”,
Civil Engineering magazine - American Society of Civil Engineering
(ASCE), January 2013, 48-53.
Canisius, T. D. G., Sorensen, J. D., and Baker, J. W. (2007). “Robustness of
structural systems - A new focus for the Joint Committee on Structural
Safety (JCSS)”. Proc. of the ICASP10 Conf., Taylor and Francis, London.
Cavaco, E.S., Casas, J.R., Neves, L.A.C., and Huespe, A.E. (2013). “Robustness of
corroded reinforced concrete structures - a structural performance approach”.
Struct. Infrastruct. E., 9(1), 42-58.
Choi, J-h., and Chang, D-k. (2009). “Prevention of progressive collapse for building
structures to member disappearance by accidental actions”. J. Loss Prevent.
Proc. Ind., 22, 1016-1019.
COST (2011) TU0601 - Structural Robustness Design for Practising Engineers,
Canisius, T.D.G. (Editor).
Crosti, C., and Duthinh, D. (2012). “Simplified gusset plate model for failure
prediction of truss bridges”. Proc. of the 6th IABMAS Conf., Italy, Stresa, 8-
12 July.
Crosti, C., Olmati, P., and Gentili, F. (2012), “Structural response of bridges to fire
after explosion”. Proc. of the 6th IABMAS Conf., Italy, Stresa, 8-12 July.
DoD - Department of Defense (2009), Unified Facilities Criteria (UFC), Report No.
UFC 4-023-03: Design of buildings to resist progressive collapse,
Washington DC: National Institute of Building Sciences.
Ellingwood, B., and Dusenberry, D. (2005). “Building design for abnormal loads and
progressive collapse”. Comput-Aided Civ. Inf., 20(3), 194-205.
EN 1991-1-7 (2006) Eurocode 1 - Actions on structures, Part 1-7: General actions –
accidental actions, European Committee for Standardization (CEN).
England, J., Agarwal, J., and Blockley, D. (2008). “The vulnerability of structures to
unforeseen events”. Comput. Struct., 86(10), 1042-1051.
FHWA (2011), Framework for Improving Resilience of Bridge Design, Publication
No IF-11-016.
Gerasimidis, S., Bisbos, C. D., and Baniotopoulos, C.C. (2012). “Vertical geometric
irregularity assessment of steel frames on robustness and disproportionate
collapse”. J. Constr. Steel Res., 74, 76–89
Giuliani, L. (2012). “Structural safety in case of extreme actions”, Special Issue on:
“Performance and Robustness of Complex Structural Systems”, Guest Editor
Franco Bontempi, Int. J. Life Cycle Perf. Eng. (IJLCPE), 1(1), 22-40.
260Structures Congress 2013 © ASCE 2013
Izzuddin, B. A., Vlassis, A. G., Elghazouli, A. Y., and Nethercot, D. A. (2008).
“Progressive collapse of multi-storey buildings due to sudden column loss -
Part I: Simplified assessment framework”. Eng. Struct., 30(5), 1308-1318.
Malla, R. B., Agarwal, P., and Ahmad, R. (2011). “Dynamic analysis methodology
for progressive failure of truss structures considering inelastic postbuckling
cyclic member behavior”. Eng. Struct., 33(5), 1503-1513.
Malsch, E., Brando, F., Iannitelli, A., Abruzzo, J., and Panariello, G. (2011). “The
Causes of the I-35 West Bridge Collapse”. Proc. 6th International Conf. on
Space Structures, London.
MnDOT - Minnesota Department of Transportation (2012), Interstate 35W Bridge:
Original Plans & Details.
Miyachi, K., Nakamura, S., and Manda, A. (2012). “Progressive collapse analysis of
steel truss bridges and evaluation of ductility”. J. Constr. Steel Res., 78, 192-
200.
Nafday, A.M. (2011). “Consequence-based structural design approach for black
swan events”. Struct. Saf., 33(1), 108-114.
Nafday, A.M. (2008). “System Safety Performance Metrics for Skeletal Structures”.
J. Struct. Eng.- ASCE, 134(3), 499-504.
NTSB - National Transportation Safety Board, (2007) Collapse of I-35W Highway
Bridge, Minneapolis, Minnesota, August 1, 2007, NTSB/HAR-08/03.
Parisi, F., Augenti, N. (2012), “Influence of seismic design criteria on blast
resistance of RC framed buildings: A case study”, Engineering Structures
44: 78-93.
Petrini F., and Bontempi F. (2011). “Estimation of fatigue life for long span
suspension bridge hangers under wind action and train transit”. Struct.
Infrastruct. E.,, 7(7-8), 491-507.
Petrini, F., and Ciampoli, M. (2012). “Performance-based wind design of tall
buildings”. Struct. Infrastruct. E., 8(10), 954-966.
Petrini, F., Li, H., and Bontempi, F. (2010). “Basis of Design and Numerical
Modeling of Offshore Wind Turbines”, Struct. Eng. Mech., 36(5), 599-624.
Saydam, D., and Frangopol, D. M. (2011). “Time-dependent performance indicators
of damaged bridge superstructures”. Eng. Struct., 33(9), 2458-2471.
Sgambi, L., Gkoumas, K., and Bontempi, F. (2012). “Genetic Algorithms for the
Dependability Assurance in the Design of a Long-Span Suspension Bridge”.
Comput-Aided Civ. Inf., 27(9), 655-675.
Sørensen, J.D., Rizzuto, E., Narasimhan, H., and Faber, M.H. (2012). “Robustness:
Theoretical framework”. Structural Engineering International: Journal of
the International Association for Bridge and Structural Engineering
(IABSE) 22(1), 66-72.
Starossek, U., and Haberland, M. (2010). “Disproportionate Collapse: Terminology
and Procedures”. J. Perform. Constr. Facil.- ASCE, 24(6), 519-528.
Stewart, M.G., and Melchers, R.E. (1997), Probabilistic risk assessment of
engineering systems, London: Chapman & Hall.
Xu, G., and Ellingwood, B. R. (2011). “An energy-based partial pushdown analysis
procedure for assessment of disproportionate collapse potential”. J Constr.
Steel Res., 67(3), 547-555.
261Structures Congress 2013 © ASCE 2013

Weitere ähnliche Inhalte

Was ist angesagt?

LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESS
LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESSLITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESS
LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESSijiert bestjournal
 
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...IOSR Journals
 
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...IRJET Journal
 
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...IAEME Publication
 
Seismic pounding of multistoreyed buildings
Seismic pounding of multistoreyed buildingsSeismic pounding of multistoreyed buildings
Seismic pounding of multistoreyed buildingseSAT Publishing House
 
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...IRJET Journal
 
Can fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structuresCan fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structureseSAT Publishing House
 
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTURE
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTUREEVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTURE
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTUREJournal For Research
 
Effect of infill walls on the seismic performance of the multistoried buildings
Effect of infill walls on the seismic performance of the multistoried buildingsEffect of infill walls on the seismic performance of the multistoried buildings
Effect of infill walls on the seismic performance of the multistoried buildingseSAT Journals
 
D04124025029
D04124025029D04124025029
D04124025029IOSR-JEN
 
Comparison of lateral analysis of reinforced concrete and steel silo
Comparison of lateral analysis of reinforced concrete and steel siloComparison of lateral analysis of reinforced concrete and steel silo
Comparison of lateral analysis of reinforced concrete and steel siloIAEME Publication
 
Genetic algorithms for the dependability assurance in the design of a long sp...
Genetic algorithms for the dependability assurance in the design of a long sp...Genetic algorithms for the dependability assurance in the design of a long sp...
Genetic algorithms for the dependability assurance in the design of a long sp...Franco Bontempi
 
Seismic Performance of RC Frame Building with Different Position of Shear Wall
Seismic Performance of RC Frame Building with Different Position of Shear WallSeismic Performance of RC Frame Building with Different Position of Shear Wall
Seismic Performance of RC Frame Building with Different Position of Shear Wallijtsrd
 
Effect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc buildingEffect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc buildingIAEME Publication
 
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover AnalysisSeismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover AnalysisIOSR Journals
 
Literature review on Seismic Pounding of Adjacent Buildings
Literature review on Seismic Pounding of Adjacent BuildingsLiterature review on Seismic Pounding of Adjacent Buildings
Literature review on Seismic Pounding of Adjacent BuildingsIRJET Journal
 
Resistane of concrte slab due to shear effect
Resistane of concrte slab due to shear effectResistane of concrte slab due to shear effect
Resistane of concrte slab due to shear effectluqman geotechnic
 

Was ist angesagt? (20)

LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESS
LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESSLITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESS
LITERATURE REVIEW ON FRACTURE TOUGHNESS AND IMPACT TOUGHNESS
 
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...
Finite Element Modeling of a Multi-Storeyed Retrofitted Reinforced Concrete F...
 
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...
IRJET- Review Paper on Convincement based Seismic Design of Open Ground Store...
 
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
Elasto plastic behavior of 3 dimensional reinforced concrete abutments consid...
 
infilled frame
infilled frame infilled frame
infilled frame
 
F012475664
F012475664F012475664
F012475664
 
Seismic pounding of multistoreyed buildings
Seismic pounding of multistoreyed buildingsSeismic pounding of multistoreyed buildings
Seismic pounding of multistoreyed buildings
 
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...
Study On Seismic Behaviour of Tall Irregular Buildings Under Influence of Non...
 
Can fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structuresCan fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structures
 
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTURE
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTUREEVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTURE
EVALUATION OF RESPONSE OF INELASTIC RCC FRAME STRUCTURE
 
Effect of infill walls on the seismic performance of the multistoried buildings
Effect of infill walls on the seismic performance of the multistoried buildingsEffect of infill walls on the seismic performance of the multistoried buildings
Effect of infill walls on the seismic performance of the multistoried buildings
 
D04124025029
D04124025029D04124025029
D04124025029
 
F1303033845
F1303033845F1303033845
F1303033845
 
Comparison of lateral analysis of reinforced concrete and steel silo
Comparison of lateral analysis of reinforced concrete and steel siloComparison of lateral analysis of reinforced concrete and steel silo
Comparison of lateral analysis of reinforced concrete and steel silo
 
Genetic algorithms for the dependability assurance in the design of a long sp...
Genetic algorithms for the dependability assurance in the design of a long sp...Genetic algorithms for the dependability assurance in the design of a long sp...
Genetic algorithms for the dependability assurance in the design of a long sp...
 
Seismic Performance of RC Frame Building with Different Position of Shear Wall
Seismic Performance of RC Frame Building with Different Position of Shear WallSeismic Performance of RC Frame Building with Different Position of Shear Wall
Seismic Performance of RC Frame Building with Different Position of Shear Wall
 
Effect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc buildingEffect of modeling of infill walls on performance of multi story rc building
Effect of modeling of infill walls on performance of multi story rc building
 
Seismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover AnalysisSeismic Performance Assessment of RCS Building By Pushover Analysis
Seismic Performance Assessment of RCS Building By Pushover Analysis
 
Literature review on Seismic Pounding of Adjacent Buildings
Literature review on Seismic Pounding of Adjacent BuildingsLiterature review on Seismic Pounding of Adjacent Buildings
Literature review on Seismic Pounding of Adjacent Buildings
 
Resistane of concrte slab due to shear effect
Resistane of concrte slab due to shear effectResistane of concrte slab due to shear effect
Resistane of concrte slab due to shear effect
 

Andere mochten auch

INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSI
INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSIINGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSI
INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSIFranco Bontempi
 
Building occupants’ comfort assessment in the PBWE framework
Building occupants’ comfort assessment in the PBWE frameworkBuilding occupants’ comfort assessment in the PBWE framework
Building occupants’ comfort assessment in the PBWE frameworkFranco Bontempi
 
SIF 2014 - Structures in Fire 2014 Shangai
SIF 2014 - Structures in Fire 2014 ShangaiSIF 2014 - Structures in Fire 2014 Shangai
SIF 2014 - Structures in Fire 2014 ShangaiFranco Bontempi
 
Basis of the analysis and design for fire-induced collapses in structures
Basis of the analysis and design for fire-induced collapses in structuresBasis of the analysis and design for fire-induced collapses in structures
Basis of the analysis and design for fire-induced collapses in structuresFranco Bontempi
 
Structural morphology optimization by evolutionary procedures
Structural morphology optimization by evolutionary proceduresStructural morphology optimization by evolutionary procedures
Structural morphology optimization by evolutionary proceduresFranco Bontempi
 
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)Franco Bontempi
 
Back-analysis of the collapse of a metal truss structure
Back-analysis of the collapse of a metal truss structureBack-analysis of the collapse of a metal truss structure
Back-analysis of the collapse of a metal truss structureFranco Bontempi
 
Concorso Roma La Sapienza Tecnica delle Costruzioni
Concorso Roma La Sapienza Tecnica delle CostruzioniConcorso Roma La Sapienza Tecnica delle Costruzioni
Concorso Roma La Sapienza Tecnica delle CostruzioniFranco Bontempi
 
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...Franco Bontempi
 
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....Franco Bontempi
 
Structural Integrity Evaluation of Offshore Wind Turbines
Structural Integrity Evaluation of Offshore Wind TurbinesStructural Integrity Evaluation of Offshore Wind Turbines
Structural Integrity Evaluation of Offshore Wind TurbinesFranco Bontempi
 
Alessandrini barriere rev sa parte 1
Alessandrini barriere rev sa parte 1Alessandrini barriere rev sa parte 1
Alessandrini barriere rev sa parte 1Franco Bontempi
 
Validazione di sistemi di continuità per strutture prefabbricate
Validazione di sistemi di continuità per strutture  prefabbricateValidazione di sistemi di continuità per strutture  prefabbricate
Validazione di sistemi di continuità per strutture prefabbricateFranco Bontempi
 
Softening and Bond Slip Nonlinear Analysis - SEWC 1998
Softening and Bond Slip Nonlinear Analysis - SEWC 1998Softening and Bond Slip Nonlinear Analysis - SEWC 1998
Softening and Bond Slip Nonlinear Analysis - SEWC 1998Franco Bontempi
 
Advanced Topics in Offshore Wind Turbines Design
Advanced Topics in Offshore Wind Turbines DesignAdvanced Topics in Offshore Wind Turbines Design
Advanced Topics in Offshore Wind Turbines DesignFranco Bontempi
 

Andere mochten auch (20)

Robustness 20 11 2014
Robustness 20 11 2014Robustness 20 11 2014
Robustness 20 11 2014
 
INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSI
INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSIINGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSI
INGEGNERIA FORENSE STRUTTURALE: BASI DEL PROGETTO E RICOSTRUZIONE DEI COLLASSI
 
Building occupants’ comfort assessment in the PBWE framework
Building occupants’ comfort assessment in the PBWE frameworkBuilding occupants’ comfort assessment in the PBWE framework
Building occupants’ comfort assessment in the PBWE framework
 
SIF 2014 - Structures in Fire 2014 Shangai
SIF 2014 - Structures in Fire 2014 ShangaiSIF 2014 - Structures in Fire 2014 Shangai
SIF 2014 - Structures in Fire 2014 Shangai
 
Annunci blast sapienza
Annunci blast sapienzaAnnunci blast sapienza
Annunci blast sapienza
 
Basis of the analysis and design for fire-induced collapses in structures
Basis of the analysis and design for fire-induced collapses in structuresBasis of the analysis and design for fire-induced collapses in structures
Basis of the analysis and design for fire-induced collapses in structures
 
Structural morphology optimization by evolutionary procedures
Structural morphology optimization by evolutionary proceduresStructural morphology optimization by evolutionary procedures
Structural morphology optimization by evolutionary procedures
 
02 arangio s
02 arangio s02 arangio s
02 arangio s
 
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS (PART II)
 
Back-analysis of the collapse of a metal truss structure
Back-analysis of the collapse of a metal truss structureBack-analysis of the collapse of a metal truss structure
Back-analysis of the collapse of a metal truss structure
 
Concorso Roma La Sapienza Tecnica delle Costruzioni
Concorso Roma La Sapienza Tecnica delle CostruzioniConcorso Roma La Sapienza Tecnica delle Costruzioni
Concorso Roma La Sapienza Tecnica delle Costruzioni
 
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...
ANALISI DEL DEGRADO IN STRUTTURE IN CALCESTRUZZO ARMATO, PARTE 2: MODELLI PER...
 
CM - premi di laurea
CM - premi di laureaCM - premi di laurea
CM - premi di laurea
 
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....
Raccolta delle sentenze disponibili in rete sul crollo edificio scolastico S....
 
Structural Integrity Evaluation of Offshore Wind Turbines
Structural Integrity Evaluation of Offshore Wind TurbinesStructural Integrity Evaluation of Offshore Wind Turbines
Structural Integrity Evaluation of Offshore Wind Turbines
 
Alessandrini barriere rev sa parte 1
Alessandrini barriere rev sa parte 1Alessandrini barriere rev sa parte 1
Alessandrini barriere rev sa parte 1
 
Validazione di sistemi di continuità per strutture prefabbricate
Validazione di sistemi di continuità per strutture  prefabbricateValidazione di sistemi di continuità per strutture  prefabbricate
Validazione di sistemi di continuità per strutture prefabbricate
 
FB tesisti luglio 2014
FB tesisti luglio 2014FB tesisti luglio 2014
FB tesisti luglio 2014
 
Softening and Bond Slip Nonlinear Analysis - SEWC 1998
Softening and Bond Slip Nonlinear Analysis - SEWC 1998Softening and Bond Slip Nonlinear Analysis - SEWC 1998
Softening and Bond Slip Nonlinear Analysis - SEWC 1998
 
Advanced Topics in Offshore Wind Turbines Design
Advanced Topics in Offshore Wind Turbines DesignAdvanced Topics in Offshore Wind Turbines Design
Advanced Topics in Offshore Wind Turbines Design
 

Ähnlich wie Robustness Assessment of a Steel Truss Bridge

Structural robustness analysis of RC frames under seismic and blast chained l...
Structural robustness analysis of RC frames under seismic and blast chained l...Structural robustness analysis of RC frames under seismic and blast chained l...
Structural robustness analysis of RC frames under seismic and blast chained l...Franco Bontempi
 
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADING
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADINGSTRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADING
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADINGIRJET Journal
 
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECT
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECTANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECT
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECTIRJET Journal
 
Effectiveness Evaluation of Seismic Protection Devices for Bridges in the PB...
Effectiveness Evaluation of Seismic Protection Devices for Bridges in  the PB...Effectiveness Evaluation of Seismic Protection Devices for Bridges in  the PB...
Effectiveness Evaluation of Seismic Protection Devices for Bridges in the PB...Franco Bontempi
 
IRJET- Study of Literature on Seismic Response of RC Irregular Structure
IRJET-  	  Study of Literature on Seismic Response of RC Irregular StructureIRJET-  	  Study of Literature on Seismic Response of RC Irregular Structure
IRJET- Study of Literature on Seismic Response of RC Irregular StructureIRJET Journal
 
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...IRJET Journal
 
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...IRJET Journal
 
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMICLITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMICIAEME Publication
 
Literature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismicLiterature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismicIAEME Publication
 
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDING
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDINGREVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDING
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDINGIRJET Journal
 
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...IRJET Journal
 
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...IRJET Journal
 
Seismic Performance of RCC Irregular Building with Shape and Stiffness
Seismic Performance of RCC Irregular Building with Shape and StiffnessSeismic Performance of RCC Irregular Building with Shape and Stiffness
Seismic Performance of RCC Irregular Building with Shape and StiffnessIRJET Journal
 
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”IRJET Journal
 
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSE
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSESTABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSE
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSEcivej
 
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...Cellular Automata Approach to Durability Analysis of Concrete Structures in A...
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...Franco Bontempi Org Didattica
 
Comparative Study of Irregular Shape Buildings
Comparative Study of Irregular Shape BuildingsComparative Study of Irregular Shape Buildings
Comparative Study of Irregular Shape BuildingsIRJET Journal
 

Ähnlich wie Robustness Assessment of a Steel Truss Bridge (20)

Structural robustness analysis of RC frames under seismic and blast chained l...
Structural robustness analysis of RC frames under seismic and blast chained l...Structural robustness analysis of RC frames under seismic and blast chained l...
Structural robustness analysis of RC frames under seismic and blast chained l...
 
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADING
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADINGSTRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADING
STRUCTURAL PERFORMANCE OF RCC BUILDING UNDER BLAST LOADING
 
Dcee4 paper 9
Dcee4 paper 9Dcee4 paper 9
Dcee4 paper 9
 
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECT
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECTANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECT
ANALYSIS OF G+6 STORY STEEL STRUCTURE UNDER BLASTING EFFECT
 
Effectiveness Evaluation of Seismic Protection Devices for Bridges in the PB...
Effectiveness Evaluation of Seismic Protection Devices for Bridges in  the PB...Effectiveness Evaluation of Seismic Protection Devices for Bridges in  the PB...
Effectiveness Evaluation of Seismic Protection Devices for Bridges in the PB...
 
IRJET- Study of Literature on Seismic Response of RC Irregular Structure
IRJET-  	  Study of Literature on Seismic Response of RC Irregular StructureIRJET-  	  Study of Literature on Seismic Response of RC Irregular Structure
IRJET- Study of Literature on Seismic Response of RC Irregular Structure
 
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...
IRJET- Analytical Study of Steel Buildings with Different Geometric Configura...
 
Brunesi2015
Brunesi2015Brunesi2015
Brunesi2015
 
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...
IRJET- Effects of Different Reinforcement Schemes and Column Shapes on the Re...
 
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMICLITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
LITERATURE WORK STUDY OF PRECAST CONCRETE CONNECTIONS IN SEISMIC
 
Literature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismicLiterature work study of precast concrete connections in seismic
Literature work study of precast concrete connections in seismic
 
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDING
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDINGREVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDING
REVIEW STUDY ON IMPACT OF BLAST LOAD ON R.C.C. BUILDING
 
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
 
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
A Review on Seismic and Progressive Collapse Evaluation of Reinforced Concret...
 
164 2
164 2164 2
164 2
 
Seismic Performance of RCC Irregular Building with Shape and Stiffness
Seismic Performance of RCC Irregular Building with Shape and StiffnessSeismic Performance of RCC Irregular Building with Shape and Stiffness
Seismic Performance of RCC Irregular Building with Shape and Stiffness
 
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”
“A REVIEW STUDY ON STEEL STRUCTURE SUBJECTED TO BLAST LOADING”
 
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSE
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSESTABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSE
STABILITY ASSESSMENT OF STEEL MOMENT FRAMES AGAINST PROGRESSIVE COLLAPSE
 
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...Cellular Automata Approach to Durability Analysis of Concrete Structures in A...
Cellular Automata Approach to Durability Analysis of Concrete Structures in A...
 
Comparative Study of Irregular Shape Buildings
Comparative Study of Irregular Shape BuildingsComparative Study of Irregular Shape Buildings
Comparative Study of Irregular Shape Buildings
 

Mehr von Franco Bontempi

84-91 UNI RM - Bontempi REV.pdf
84-91 UNI RM - Bontempi REV.pdf84-91 UNI RM - Bontempi REV.pdf
84-91 UNI RM - Bontempi REV.pdfFranco Bontempi
 
PGS - lezione 63 - robustness.pdf
PGS - lezione 63 - robustness.pdfPGS - lezione 63 - robustness.pdf
PGS - lezione 63 - robustness.pdfFranco Bontempi
 
PGS - lezione 60 - evidences of failures.pdf
PGS - lezione 60 - evidences of failures.pdfPGS - lezione 60 - evidences of failures.pdf
PGS - lezione 60 - evidences of failures.pdfFranco Bontempi
 
La realtà dei ponti e dei viadotti: controllo e manutenzione
La realtà dei ponti e dei viadotti: controllo e manutenzioneLa realtà dei ponti e dei viadotti: controllo e manutenzione
La realtà dei ponti e dei viadotti: controllo e manutenzioneFranco Bontempi
 
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.Franco Bontempi
 
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELSRISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELSFranco Bontempi
 
Approccio sistemico al progetto dei grandi ponti
Approccio sistemico al progetto dei grandi pontiApproccio sistemico al progetto dei grandi ponti
Approccio sistemico al progetto dei grandi pontiFranco Bontempi
 
PGS - lezione D - grandi strutture.pdf
PGS - lezione D - grandi strutture.pdfPGS - lezione D - grandi strutture.pdf
PGS - lezione D - grandi strutture.pdfFranco Bontempi
 
PGS - lezione F - ingegneria forense.pdf
PGS - lezione F - ingegneria forense.pdfPGS - lezione F - ingegneria forense.pdf
PGS - lezione F - ingegneria forense.pdfFranco Bontempi
 
PGS - lezione C - controllo e manutenzione.pdf
PGS - lezione C - controllo e manutenzione.pdfPGS - lezione C - controllo e manutenzione.pdf
PGS - lezione C - controllo e manutenzione.pdfFranco Bontempi
 
Fenomeni di instabilita'
Fenomeni di instabilita'Fenomeni di instabilita'
Fenomeni di instabilita'Franco Bontempi
 
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaio
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaioIntroduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaio
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaioFranco Bontempi
 
FB - PSA Esercitazione 1_12_18-II parte.pdf
FB - PSA Esercitazione 1_12_18-II parte.pdfFB - PSA Esercitazione 1_12_18-II parte.pdf
FB - PSA Esercitazione 1_12_18-II parte.pdfFranco Bontempi
 
Gestione di Ponti e Grandi Strutture: Spalle - Pile - Antenne
Gestione di Ponti e Grandi Strutture: Spalle - Pile - AntenneGestione di Ponti e Grandi Strutture: Spalle - Pile - Antenne
Gestione di Ponti e Grandi Strutture: Spalle - Pile - AntenneFranco Bontempi
 
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdf
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdfPGS - lezione 04 - MODELLAZIONI DISCRETE.pdf
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdfFranco Bontempi
 
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdf
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdfPGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdf
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdfFranco Bontempi
 

Mehr von Franco Bontempi (20)

84-91 UNI RM - Bontempi REV.pdf
84-91 UNI RM - Bontempi REV.pdf84-91 UNI RM - Bontempi REV.pdf
84-91 UNI RM - Bontempi REV.pdf
 
PGS - lezione 63 - robustness.pdf
PGS - lezione 63 - robustness.pdfPGS - lezione 63 - robustness.pdf
PGS - lezione 63 - robustness.pdf
 
PGS - lezione 60 - evidences of failures.pdf
PGS - lezione 60 - evidences of failures.pdfPGS - lezione 60 - evidences of failures.pdf
PGS - lezione 60 - evidences of failures.pdf
 
La realtà dei ponti e dei viadotti: controllo e manutenzione
La realtà dei ponti e dei viadotti: controllo e manutenzioneLa realtà dei ponti e dei viadotti: controllo e manutenzione
La realtà dei ponti e dei viadotti: controllo e manutenzione
 
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.
ANALISI DEL RISCHIO PER LA SICUREZZA NELLE GALLERIE STRADALI.
 
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELSRISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS
RISK ANALYSIS FOR SEVERE TRAFFIC ACCIDENTS IN ROAD TUNNELS
 
Approccio sistemico al progetto dei grandi ponti
Approccio sistemico al progetto dei grandi pontiApproccio sistemico al progetto dei grandi ponti
Approccio sistemico al progetto dei grandi ponti
 
PGS - lezione D - grandi strutture.pdf
PGS - lezione D - grandi strutture.pdfPGS - lezione D - grandi strutture.pdf
PGS - lezione D - grandi strutture.pdf
 
PGS - lezione F - ingegneria forense.pdf
PGS - lezione F - ingegneria forense.pdfPGS - lezione F - ingegneria forense.pdf
PGS - lezione F - ingegneria forense.pdf
 
PGS - lezione C - controllo e manutenzione.pdf
PGS - lezione C - controllo e manutenzione.pdfPGS - lezione C - controllo e manutenzione.pdf
PGS - lezione C - controllo e manutenzione.pdf
 
PSA_MF_05_05_23.pdf
PSA_MF_05_05_23.pdfPSA_MF_05_05_23.pdf
PSA_MF_05_05_23.pdf
 
PSA_MF_04_05_23.pdf
PSA_MF_04_05_23.pdfPSA_MF_04_05_23.pdf
PSA_MF_04_05_23.pdf
 
Fenomeni di instabilita'
Fenomeni di instabilita'Fenomeni di instabilita'
Fenomeni di instabilita'
 
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaio
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaioIntroduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaio
Introduzione al Calcolo Elasto – Plastico «a freddo» delle strutture in acciaio
 
FB - PSA Esercitazione 1_12_18-II parte.pdf
FB - PSA Esercitazione 1_12_18-II parte.pdfFB - PSA Esercitazione 1_12_18-II parte.pdf
FB - PSA Esercitazione 1_12_18-II parte.pdf
 
Gestione di Ponti e Grandi Strutture: Spalle - Pile - Antenne
Gestione di Ponti e Grandi Strutture: Spalle - Pile - AntenneGestione di Ponti e Grandi Strutture: Spalle - Pile - Antenne
Gestione di Ponti e Grandi Strutture: Spalle - Pile - Antenne
 
Esplosioni.
Esplosioni.Esplosioni.
Esplosioni.
 
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdf
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdfPGS - lezione 04 - MODELLAZIONI DISCRETE.pdf
PGS - lezione 04 - MODELLAZIONI DISCRETE.pdf
 
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdf
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdfPGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdf
PGS - lezione 03 - IMPALCATO DA PONTE E PIASTRE.pdf
 
INCENDIO
INCENDIOINCENDIO
INCENDIO
 

Kürzlich hochgeladen

Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxLMW Machine Tool Division
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxNaveenVerma126
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfJulia Kaye
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxwendy cai
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesDIPIKA83
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxSAJITHABANUS
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxHome
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxrealme6igamerr
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingMarian Marinov
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS Bahzad5
 
Technology Features of Apollo HDD Machine, Its Technical Specification with C...
Technology Features of Apollo HDD Machine, Its Technical Specification with C...Technology Features of Apollo HDD Machine, Its Technical Specification with C...
Technology Features of Apollo HDD Machine, Its Technical Specification with C...Apollo Techno Industries Pvt Ltd
 
Power System electrical and electronics .pptx
Power System electrical and electronics .pptxPower System electrical and electronics .pptx
Power System electrical and electronics .pptxMUKULKUMAR210
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Akarthi keyan
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfRedhwan Qasem Shaddad
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfNaveenVerma126
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchrohitcse52
 

Kürzlich hochgeladen (20)

Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
 
Présentation IIRB 2024 Chloe Dufrane.pdf
Présentation IIRB 2024 Chloe Dufrane.pdfPrésentation IIRB 2024 Chloe Dufrane.pdf
Présentation IIRB 2024 Chloe Dufrane.pdf
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptx
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display Devices
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptx
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & Logging
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
 
Technology Features of Apollo HDD Machine, Its Technical Specification with C...
Technology Features of Apollo HDD Machine, Its Technical Specification with C...Technology Features of Apollo HDD Machine, Its Technical Specification with C...
Technology Features of Apollo HDD Machine, Its Technical Specification with C...
 
Power System electrical and electronics .pptx
Power System electrical and electronics .pptxPower System electrical and electronics .pptx
Power System electrical and electronics .pptx
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part A
 
Lecture 2 .pptx
Lecture 2                            .pptxLecture 2                            .pptx
Lecture 2 .pptx
 
Présentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdfPrésentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdf
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdf
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
 

Robustness Assessment of a Steel Truss Bridge

  • 1. Robustness Assessment of a Steel Truss Bridge P. Olmati1 , F. Brando2 and K. Gkoumas1 1 School of Engineering, Sapienza University of Rome, Via Eudossiana 18, 00184, Rome, Italy; PH +39-06-44585.265; FAX +39-02-30136014; email: pierluigi.olmati@uniroma1.it; konstantinos.gkoumas@uniroma1.it 2 Thornton Tomasetti, 51 Madison Ave, New York, ST 10010-1603; PH (917) 661- 7800; FAX (917) 661-7801; email: FBrando@thorntontomasetti.com ABSTRACT This study focuses on the robustness assessment of a steel truss bridge. In the first part, a brief overview of several robustness indexes found in literature is provided, together with the principal approaches on the topics of structural robustness, collapse resistance and progressive collapse. In the second part, the extensively studied I-35W Minneapolis steel truss bridge is used as a case study for the application of a consequence-based robustness assessment. In particular, focus is given on the influence that the loss of primary elements has on the structural load bearing capacity. INTRODUCTION Structural robustness is a research topic particularly relevant in the design and the safety assessment of both new and existing structures. The latter are prone not only to local failure due to accidental or man-made attacks, but also due to long term material degradation (e.g. corrosion), bad design or construction. Behind this attention, there is the increasing interest from society that cannot tolerate death and losses as in the past. This is more evident after: · recent terrorist attacks (a series of terror attacks in America and beyond, the deadliest being the September 11, 2001 attacks); · recent bridge collapses due to deterioration or bad design or bad construction (for example, the De la Concorde overpass collapse in Montreal, 2006). · recent multiple hazard events from natural sources the most significant of which was the 2011 earthquake, off the Pacific coast of Tōhoku. Steel truss bridges in particular, in their various forms, very common worldwide, are now aged, not often optimally maintained, and need to be checked both for safety and serviceability. Considering what said above, aim of this paper is to apply to a steel truss bridge, a methodology for the robustness assessment that, among else, takes into account the consequences of unexpected actions on or unforeseen events (England et al. 2008) on structures, with a special focus on the effect of the loss of primary elements on the structural load bearing capacity. 250Structures Congress 2013 © ASCE 2013
  • 2. STRUCTURAL ROBUSTNESS AND PROGRESSIVE COLLAPSE A variety of terms have been used in literature, however, typically robustness is defined as the “insensitivity of a structure to initial damage” and collapse resistance as the “insensitivity of a structure to abnormal events” (Starossek and Haberland, 2010). Similarly, ASCE 7-05 (2005), defines progressive collapse as the spread of an initial local failure from element to element, eventually resulting in collapse of an entire structure or a disproportionately large part of it. Starossek and Haberland (2010) focus on the differences of progressive and disproportionate collapse, concluding that the terms of disproportionate collapse and progressive collapse are often used interchangeably because disproportionate collapse often occurs in a progressive manner and progressive collapse can be disproportionate. A review of international research on structural robustness and disproportionate collapse is provided in Arup (2011). Arangio et al. (2011) and Sgambi et al. (2012) provide a dependability framework adapted from the electronic engineering field, where dependability attributes are either related to structural safety or serviceability. Potential failure scenarios specific for bridges are provided in FHWA (2011), within a framework aiming at the resilience improvement. Giuliani (2012) identifies the design strategies for obtaining robustness, using prevention and mitigation measures. An additional aspect is the inherent uncertainty associated with actions and mechanical, geometric and environmental parameters cannot be ignored since they affect the structural response (Petrini and Ciampoli, 2012). Structural robustness assessment methods. A relevant issue related to the structural robustness evaluation, is the choice of appropriate synthetic parameters describing for example the sensitivity of a damaged structure in suffering a disproportionate collapse. Eurocode 1 (EN 1991-1-7 2006) merely outlines the issue of structural robustness in a qualitative manner, stating that a structure should not be damaged by events to an extent disproportionate to the original cause. Several authors provide a review of methods for assessing structural robustness (Canisius et al. 2007; Starossek and Haberland, 2010; COST, 2011; Sørensen et al. 2012; Parisi and Augenti 2012; Cavaco et al. 2013). In what follows a non-exhaustive overview of approaches for the robustness assessment is provided, focusing on the proposed indexes. Ellingwood and Dusenberry (2005), link the progressive collapse probability P(F) to a chain of probabilities, consisting in (i) the hazard of an abnormal event P(H), (ii) the local damage as a consequence of this hazard P(D│H), and (iii) the failure of the structure as a result of the local damage D due to H P(F│DH). P(F)= P(F│DH)·P(D│H)·P(H) Baker et al. (2008) propose a probabilistic framework for the robustness assessment, computing both direct risk, associated with the direct consequences of potential damages to the system, and indirect risk, corresponding to the increased risk of a damaged system. The latter corresponds to the robustness of the system, since it can be assumed as a risk from consequences disproportionate to the cause of 251Structures Congress 2013 © ASCE 2013
  • 3. the damage. In their approach, a robust system is considered to be one where indirect risks do not contribute significantly to the total system risk. IndDir Dir Rob RR R I + = The index takes values from 0 (if all risk is due to indirect consequences) to 1 (if there is no risk due to indirect consequences, thus, the system is completely robust). Biondini and Restelli (2008) propose a robustness index (ρ) associated with the displacements of the system: d o s s =ρ Where s0 is the displacement vector, ║·║ denotes the Euclidian norm, and the subscript “0” and “d” refer respectivelly to the intact and damage state of the structure. Izzuddin et al. (2008) propose a multi-level framework for the progressive collapse assessment of building structures subject to sudden column loss. The proposed assessment framework utilizes three main stages: (i) nonlinear static response of the damaged structure under gravity loading; (ii) simplified dynamic assessment to establish the maximum dynamic response under sudden column loss; and, (iii) ductility assessment of the connections. Within this framework, they propose that the single measure of structural robustness is the system pseudo-static capacity, that is the maximum value of the nonlinear static resistance for which the resulting maximum dynamic displacement, is less than or equal to the ductility limit. The comparison of the latter against the applied gravity loading establishes the required limit state. Cavaco et al. (2013) consider robustness as the measure of degree of structural performance lost after damage occurrence, and propose the following metric (Rd: Robustness Index). ∫ = = = 1 0 )( d d d dxxfR Where Rd indicates the area above the curve defined by the normalized structural performance f (given by the ratio between the structural performance on the intact and damage states), subjected to a normalized damage d (given by the ratio between actual and maximum possible damage). Nafday (2011) discusses the usefulness of consequence event design, for extremely rare, unforeseen, and difficult to characterize statistically events (black swans). In this view, the author, with reference to truss structures, proposes an 252Structures Congress 2013 © ASCE 2013
  • 4. additional design phase that focuses on the robustness, the damage tolerance and the redundancy of the structure. This proposed metric consequence factor Cf i for the i-th member is based on the evaluation of the determinants of the normalized stiffness matrixes for the undamaged and damaged structure and is defined as: N i Ni f K K C = Where |KN| is volume of the geometrical shape which is spanned by the vectors of matrix KN for ‘intact condition’ and |KN i | is similar volume under ‘damaged condition’ i.e., after the removal of the i-th member. The robustness, ultimate strength and progressive collapse susceptibility of steel truss structures and bridges has been the subject of recent research. Xu and Ellingwood (2011) apply a method of energy-based nonlinear static pushdown analysis on steel frames. Gerasimidis et al. (2012) apply a methodology loosely based on the alternate load path method and obtain robustness measure for geometric irregular steel frames that have the advantage of being comparable. Choi and Chang (2009), focus on the vertical load bearing capacity of truss structures, using a sensitivity index that accounts for the influence of a lost element to the load bearing capacity. Miyachi et al. (2012) focus on how the live load intensity and distribution affect the ultimate strength and ductility of different steel truss bridges, similar to the one considered in this study. Malla et al. (2011) conduct nonlinear dynamic analysis for the progressive failure assessment of bridge truss members, considering their inelastic post-buckling cyclic behavior. Saydam and Frangopol (2011) use FE skills to investigate the vulnerability, redundancy and robustness of truss bridges, taking into account the stochastic time-dependent deterioration of the structure. What emerges from the above is the difference in the approaches and indexes in literature towards the structural robustness quantification. An overview is provided in Table 1. Table 1. Overview of robustness approaches. Robustness Approach Index - property of the structure or property of the structure and the environment - static or dynamic - linear or non-linear - deterministic or probabilistic Member consequence factor and robustness assessment. Focusing on skeletal structures (e.g. trusses), current member-based design in structural codes does not explicitly consider system safety performance during the structural design, while the level of safety in new designs is usually provided on the basis of intuition and past experience (Nafday, 2008). On the other hand, the Ultimate Limit State (ULS) of the Performance-Based Design (PBD) requires that individual structural members are designed to have a resistance (R) greater than the load action (E), where both R and E are probabilistically characterized (Stewart and Melchers, 1997). 253Structures Congress 2013 © ASCE 2013
  • 5. The member-based design is summarized in the following design expression, valid for a single structural member: 0ER undamaged d undamaged d ≥− (1) where Rd undamaged and Ed undamaged are the design values respectively of the resistance and of the solicitation (EN 1990 2002) in the undamaged configuration of the structure. Concerning the commonly implemented standards this equation is not respected with a probability of 10-(6÷7) . The method applied here aims to introduce an additional multiplicative coefficient in the first term of the Eq. (1): this is identified as the member consequence factor (Cf), takes values within a range from 0 to 1, and quantifies the influence that a loss of a structural element has on the load carrying capacity. Essentially, if Cf tends to 1, the member is likely to be important to the structural system; instead if Cf tends to 0, the member is likely to be unimportant to the structural system. Cf provides to the single structural member an additional load carrying capacity, in function of the nominal design (not extreme) loads. This additional capacity can be used for contrasting unexpected and extreme loads. 0ER*)C1( undamaged d undamaged d scenario f ≥−− (2) Nafday (2011) provides Eq. (2) in a similar manner, with the only difference being on the range mean of Cf that is the inverse of the proposed one, so the first term of Eq. (2) is multiplied directly by Cf. Thus, in this study the equation proposed by (Nafday 2011) has been slightly revised in order to fit with the here proposed expression of the Cf - see both Eq. (2) and Eq. (3). The structure is subjected to a set of damage scenarios and the consequence of the damages is evaluated by the consequence factor (Cf scenario ) that for convenience can be easily expressed in percentage. For damage scenario is intended the failure of one or more structural elements. Considering the above, robustness can be expressed as the complement to 100 of Cf scenario , intended as the effective coefficient that affects directly the resistance - see Eq. (2). Cf scenario is evaluated by the maximum percentage difference of the structural stiffness matrix eigenvalues of the damaged and undamaged configurations of the structure. N1i un i dam i un iscenario f 100 )( maxC −= ⎟⎟ ⎠ ⎞ ⎜⎜ ⎝ ⎛ λ λ−λ = (3) where, λi un and λi dam are respectively the i-th eigenvalue of the structural stiffness matrix in the undamaged and damaged configuration, and N is the total number of the eigenvalues. The corresponding robustness index (Rscenario ) related to the damage scenario is therefore defined as: 254Structures Congress 2013 © ASCE 2013
  • 6. scenario f scenario C100R −= (4) Values of Cf close to 100% mean that the failure of the structural member most likely causes a global structural collapse. Low values of Cf do not necessarily mean that the structure survives after the failure of the structural member: this is something that must be established by a non-linear dynamic analysis that considers the loss of the specific structural member. A value of Cf close to 0% means that the structure has a good structural robustness. Some further considerations are necessary. The proposed method for computing the consequence factors should not be used 1) for structures that have high concentrated masses (especially non-structural masses) in a particular zone, and 2) for structures that have cable structural system (e.g. tensile structures, suspension bridges). The first issue is related to the dynamic nature of a structural collapse, since Eq. (3) does not take into account the mass matrix of the system that is directly related to the inertial forces. It is possible to accept this limitation only if the masses are those of the structural members, thus distributed uniformly. Moreover there is no way to consider any dynamic magnification phenomena with Eq. (3). The second issue is related to the geometrical non-linearity of cable structures. For such structures the stiffness matrix is a function of the loads, something not accounted for in the elastic stiffness matrix. Moreover for the nature of the elastic stiffness matrix, eventual structural dissipative behaviors and non-linear resistive mechanisms (e.g. catenary action) are not taken into account. In the authors’ opinion the above limitations can be accepted if the desired outcome is a non-computational expensive method, since the Cf value provides an indication of the structural robustness in a quick and smart manner. Thus, the Cf as expressed in Eq. (3) can be used primarily as an index to establish the critical structural members for the global structural stability, or to compare different structural design solutions from a robustness point of view. The latter implementation of Cf can be helpful for the robustness assessment of complex structures, such as wind turbine jacket structures (Petrini et al. 2010), since it provides an indication on the key structural elements that in a complex structure are of difficult evaluation. The method applied in this study aims at increasing the collapse resistance of a structure, by focusing on the resistance of the single structural members, and accounting for their importance to the global structural behavior consequently to a generic extreme event that can cause a local damage. Moreover, the method is particularly helpful for unpredictable events that by definition are not possible to take into account in the design phase. This does not mean that the collapse resistance is accounted only for the single member resistance, because the authors intend, as a design philosophy, to increase the resistance of the single members in addition to the structural stability analysis that provide the assessment of the global structural behavior. Thus, this method neglects the “load characterization” of the extreme load since it is considered unpredictable, and it is complementary to the so-called threat independent stability analyses (DoD, 2009). 255Structures Congress 2013 © ASCE 2013
  • 7. APPLICATION ON A STEEL TRUSS BRIDGE This section focuses on the robustness assessment of a steel truss bridge using the member consequence factor method. The bridge used as a case study is the I-35 West Bridge in Minneapolis. The I-35 West Bridge was built in the early 1960s and opened to traffic in 1967. The bridge spanned across the Mississippi River, Minneapolis and it was supported on thirteen reinforced concrete piers and consisted of fourteen spans. Eleven of the fourteen spans were approach spans to the main deck truss portion. The total length of the bridge including the approach and deck truss was approximately 580 meter (1,907 feet). The length of the continuous deck truss portion which spanned over four piers was approximately 324 meter (1,064 feet). The elevation of the deck truss portion of the bridge is shown in Figure 1. Figure 1. Bridge overview (edited from MnDOT). The deck truss portion of the bridge was supported on a pinned bearing at Pier 7 and roller bearings at the other three supports. The main bridge trusses were comprised of built-up welded box and I-sections sandwiched by gusset plates at each panel point. The collapse which occurred on August 1st 2007 was probably due to a combination of the temperature effect, roller bearings condition, and increased gravity loads on the bridge prior to collapse. For this functionally non-redundant bridge the initial buckle at the lower chord member close to the pier and local plastic hinges in the member resulted in global instability and collapse (Malsch et al. 2011). The bridge has been thoroughly studied by Brando et al. (2010) focusing on the issues of redundancy, progressive collapse and robustness. Studies have been conducted in order to assess the effect of the collapse of specific structural components (Crosti and Duthinh, 2012), while Crosti et al. (2012) performed non- linear dynamic analysis on specific damage scenarios. For computing the consequence factors and the robustness index of the structure for the selected damage scenarios a FE model of the structure is necessary. Figure 2 shows the three-dimensional FE model of the I-35 West Bridge built using the commercial FE solver Sap2000® (Brando et al. 2010). Both shell and beam finite elements are used in the FE model. The bridge superstructure and both the deck girders and beams are built using beam elements, while, the concrete deck is modeled using shell elements. Moreover, contact links connect the deck with both the deck girders and beams. In accordance to the original blueprints of the I-35 West Bridge (MnDOT 2012), standard and non-conventional beam cross sections are implemented in the model. 3 Span Continuous Trusses – 1,064 ft Pier 7 Pier 6 North Pier 8 Pier 5 256Structures Congress 2013 © ASCE 2013
  • 8. Figure 2. 3D FE model of the I-35 West Bridge. From this model a simplified (plane) FE model is extracted and is adopted for computing the structural stiffness matrix in both the damaged and undamaged configurations. This choice has mostly to do with computational challenges in computing the stiffness matrix for the full model. Regarding the structural decomposition of complex structures it is possible to refer to the Bontempi et al. (2008) and Petrini and Bontempi (2011). The expression of the consequence factor provided by Eq. 4 refers to the eigenvalues of the elastic stiffness matrix. The choice to use a simplified model is also justified and feasible since Eq. 4 is independent from the mass of the structure. Eq. 4 is also independent from the loads, so the loads in the FE model are not considered. The concrete deck is only simply-supported by the bridge superstructure, so the concrete deck is not considered in the analyses and it is omitted in the model, consequently, the contact links are deleted as well. The deck girders and beams are also omitted since they do not have a strong influence to the load bearing capacity of the bridge. The two trusses of the bridge superstructure are similar and connected by a transverse truss structure, so the analyses focus on a single truss; at this point one plane truss is obtained from the three-dimensional model, in order to have a two- dimensional FE model, implemented for computing the stiffness matrix in both the damaged and undamaged configurations. Concluding, only a single lateral truss of the bridge is considered, and a set of damage scenario is selected (Figure 3). Figure 3. Lateral truss of the bridge and selection of damage scenarios. The damage scenarios for this application are not cumulative, so only a single member is removed from the model for each damage scenario. In this 6 7 2 1 3 4 5 257Structures Congress 2013 © ASCE 2013
  • 9. application the scenarios chosen focus on the area recognized as initiating the collapse according to forensic investigations (Brando et al. 2013). With the aim of increasing the structural robustness of the bridge, and in order to test the sensitivity of the method proposed, an improved variation of the structural system is considered. In this case (Figure 4) the updated bridge truss is a hyper-static steel truss structure. The results of both the original and the enhanced structural schemes, under the same damage scenarios, are shown in Figure 5. Figure 4. Updated lateral truss of the bridge and selection of damage scenarios. The proposed robustness index (based on the member consequence factor Cf) captures both the lack of robustness of the I-35 W Bridge, and its robustness enhancement as a consequence of increasing the redundancy of the structure. Figure 5. Damage scenario evaluation. Generally speaking, it can be observed that the case-study bridge shows a low robustness index. This is due to the fact that it is (internally) statically determined. From the analysis of the bridge in its original configuration and for the chosen damages configurations, a consequence factor of 0.77 has been computed for 6 7 2 1 3 4 5 37 59 42 45 35 38 23 63 41 58 55 65 62 77 0 20 40 60 80 100 1 2 3 4 5 6 7 Robustness% Damage Scenario Cf max Robustness 83 87 88 53 60 86 64 17 13 12 47 40 14 36 0 20 40 60 80 100 1 2 3 4 5 6 7 Robustness% Damage Scenario Cf max Robustness 258Structures Congress 2013 © ASCE 2013
  • 10. the DS7 and, consequently, a robustness index of 0.23 is obtained. The consequence factors obtained by the analysis of the various damage scenarios can be used, as shown in Eq. (2), for the re-sizing of the structural elements In this case the structural scheme of the bridge does not change with respect to the original one and this option can be considered as a local (element-based) improvement of the structural system. In alternative, the consequence factor can be used only as a robustness performance index, without making use of Eq. (2). More than one structural configuration can be examined in order to assess which is the best solution in terms of Cf. An example of this strategy is given in the application of Figure 4. In the examined case the consequence factor obtained by the DS7 decreases from 0.77 to 0.36; this appreciable result is probably due to the position of the failed element in the DS7, which, being a lower element of the truss plays an important role in the load carrying capacity of the original system. Generally speaking, the redundant bridge configuration (Figure 4) shows certain insensitivity to the internal damage scenarios (number 1, 2 and 3). This option can be considered as a global improvement of the structural system. The previous strategies can be adopted simultaneously: i) the designer-sizing of the elements can be affected by the robustness index by using Eq. (2); and ii) the structural scheme can be changed (also on the basis of the Cf values) in order to increase the robustness. In this case, both local and global solutions provide improvements to the structural system. CONCLUSION Some brief considerations can be made on the findings for the specific application. The proposed metric seems to be promising for the robustness assessment of a complex structural system, and could be used as tool for localizing critical areas in the design, analysis and investigation phases. Furthermore, comprehensive assessments that consider a larger set of damage scenarios can be performed by implementing this method using appropriate search heuristics. Limitations of the implemented method arise from the fact that in the analyses a reduced structural system is used. In this sense, findings can be considered as merely preliminary, and have to be verified using complete models and advanced numerical analyses. Finally, an improved expression of the Cf could be obtained by considering both the stiffness and mass matrix of the structure and the plasticity of the elements. REFERENCES Arangio S., Bontempi F., and Ciampoli M. (2011). "Structural integrity monitoring for dependability". Struct. Infrastruct. E., 7(1), 75-86. Arup (2011) Review of international research on structural robustness and disproportionate collapse, London: Department for Communities and Local Government. ASCE 7-05 (2005) Minimum design loads for buildings and other structures, American Society of Civil Engineers (ASCE). Baker J. W., Schubert, M., and Faber M. H. (2008). “On the assessment of robustness”. Struct. Saf. 30(3),253–267. 259Structures Congress 2013 © ASCE 2013
  • 11. Biondini, F., Frangopol, D. M., and Restelli, S. (2008). “On structural robustness, redundancy and static indeterminancy”. Proc. of the 2008 Structures Congress, April 24-26, 2008, Vancouver, BC, Canada. Bontempi, F., Gkoumas, K., and Arangio, S. (2008). “Systemic approach for the maintenance of complex structural systems”. Struct. Infrastruct. E., 4(2), 77- 94. Brando, F., Testa, R.B., and Bontempi, F. (2010). “Multilevel structural analysis for robustness assessment of a steel truss bridge”. Proc. of the 5th IABMAS Conf., Philadelphia, USA, 11-15 July 2010. Brando, F., Iannitelli, A., Cao, L., Malsch, E.A., Panariello, G., Abruzzo, J., and Pinto, M.J., (2013). “Forensic Information Modeling: a new forensic tool”, Civil Engineering magazine - American Society of Civil Engineering (ASCE), January 2013, 48-53. Canisius, T. D. G., Sorensen, J. D., and Baker, J. W. (2007). “Robustness of structural systems - A new focus for the Joint Committee on Structural Safety (JCSS)”. Proc. of the ICASP10 Conf., Taylor and Francis, London. Cavaco, E.S., Casas, J.R., Neves, L.A.C., and Huespe, A.E. (2013). “Robustness of corroded reinforced concrete structures - a structural performance approach”. Struct. Infrastruct. E., 9(1), 42-58. Choi, J-h., and Chang, D-k. (2009). “Prevention of progressive collapse for building structures to member disappearance by accidental actions”. J. Loss Prevent. Proc. Ind., 22, 1016-1019. COST (2011) TU0601 - Structural Robustness Design for Practising Engineers, Canisius, T.D.G. (Editor). Crosti, C., and Duthinh, D. (2012). “Simplified gusset plate model for failure prediction of truss bridges”. Proc. of the 6th IABMAS Conf., Italy, Stresa, 8- 12 July. Crosti, C., Olmati, P., and Gentili, F. (2012), “Structural response of bridges to fire after explosion”. Proc. of the 6th IABMAS Conf., Italy, Stresa, 8-12 July. DoD - Department of Defense (2009), Unified Facilities Criteria (UFC), Report No. UFC 4-023-03: Design of buildings to resist progressive collapse, Washington DC: National Institute of Building Sciences. Ellingwood, B., and Dusenberry, D. (2005). “Building design for abnormal loads and progressive collapse”. Comput-Aided Civ. Inf., 20(3), 194-205. EN 1991-1-7 (2006) Eurocode 1 - Actions on structures, Part 1-7: General actions – accidental actions, European Committee for Standardization (CEN). England, J., Agarwal, J., and Blockley, D. (2008). “The vulnerability of structures to unforeseen events”. Comput. Struct., 86(10), 1042-1051. FHWA (2011), Framework for Improving Resilience of Bridge Design, Publication No IF-11-016. Gerasimidis, S., Bisbos, C. D., and Baniotopoulos, C.C. (2012). “Vertical geometric irregularity assessment of steel frames on robustness and disproportionate collapse”. J. Constr. Steel Res., 74, 76–89 Giuliani, L. (2012). “Structural safety in case of extreme actions”, Special Issue on: “Performance and Robustness of Complex Structural Systems”, Guest Editor Franco Bontempi, Int. J. Life Cycle Perf. Eng. (IJLCPE), 1(1), 22-40. 260Structures Congress 2013 © ASCE 2013
  • 12. Izzuddin, B. A., Vlassis, A. G., Elghazouli, A. Y., and Nethercot, D. A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss - Part I: Simplified assessment framework”. Eng. Struct., 30(5), 1308-1318. Malla, R. B., Agarwal, P., and Ahmad, R. (2011). “Dynamic analysis methodology for progressive failure of truss structures considering inelastic postbuckling cyclic member behavior”. Eng. Struct., 33(5), 1503-1513. Malsch, E., Brando, F., Iannitelli, A., Abruzzo, J., and Panariello, G. (2011). “The Causes of the I-35 West Bridge Collapse”. Proc. 6th International Conf. on Space Structures, London. MnDOT - Minnesota Department of Transportation (2012), Interstate 35W Bridge: Original Plans & Details. Miyachi, K., Nakamura, S., and Manda, A. (2012). “Progressive collapse analysis of steel truss bridges and evaluation of ductility”. J. Constr. Steel Res., 78, 192- 200. Nafday, A.M. (2011). “Consequence-based structural design approach for black swan events”. Struct. Saf., 33(1), 108-114. Nafday, A.M. (2008). “System Safety Performance Metrics for Skeletal Structures”. J. Struct. Eng.- ASCE, 134(3), 499-504. NTSB - National Transportation Safety Board, (2007) Collapse of I-35W Highway Bridge, Minneapolis, Minnesota, August 1, 2007, NTSB/HAR-08/03. Parisi, F., Augenti, N. (2012), “Influence of seismic design criteria on blast resistance of RC framed buildings: A case study”, Engineering Structures 44: 78-93. Petrini F., and Bontempi F. (2011). “Estimation of fatigue life for long span suspension bridge hangers under wind action and train transit”. Struct. Infrastruct. E.,, 7(7-8), 491-507. Petrini, F., and Ciampoli, M. (2012). “Performance-based wind design of tall buildings”. Struct. Infrastruct. E., 8(10), 954-966. Petrini, F., Li, H., and Bontempi, F. (2010). “Basis of Design and Numerical Modeling of Offshore Wind Turbines”, Struct. Eng. Mech., 36(5), 599-624. Saydam, D., and Frangopol, D. M. (2011). “Time-dependent performance indicators of damaged bridge superstructures”. Eng. Struct., 33(9), 2458-2471. Sgambi, L., Gkoumas, K., and Bontempi, F. (2012). “Genetic Algorithms for the Dependability Assurance in the Design of a Long-Span Suspension Bridge”. Comput-Aided Civ. Inf., 27(9), 655-675. Sørensen, J.D., Rizzuto, E., Narasimhan, H., and Faber, M.H. (2012). “Robustness: Theoretical framework”. Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering (IABSE) 22(1), 66-72. Starossek, U., and Haberland, M. (2010). “Disproportionate Collapse: Terminology and Procedures”. J. Perform. Constr. Facil.- ASCE, 24(6), 519-528. Stewart, M.G., and Melchers, R.E. (1997), Probabilistic risk assessment of engineering systems, London: Chapman & Hall. Xu, G., and Ellingwood, B. R. (2011). “An energy-based partial pushdown analysis procedure for assessment of disproportionate collapse potential”. J Constr. Steel Res., 67(3), 547-555. 261Structures Congress 2013 © ASCE 2013