INDL ARTS - LESSON 10 RECYCLING WASTE MATERIALS INTO FUNCTIONAL ITEMS.pptx

1. BONIFACIO R. DUNGHIT JR.
TLE 6 Teacher
1

2. Process of Recycling
Collection of waste materials can be done in two ways:
1. Bring waste materials to collection centers like junk
shops or the barangay waste management center where
there are separate containers for different types of trash.
2. Pick up from residences where every barangay has a
schedule of garden collection.
2

3. Importance of Recycling
Recycling brings about so many benefits like:
 Employment through livelihood products
 Helping reduce pollution and the need for landfills
 Helping save energy by reducing the use of fuel in manufacturing products
 Helping families save money by reducing expenses for buying new products
 Helping the economy through investments in local recycling programs.
 Helping conserve and sustain the use of natural resources for future generations.
 Bringing out the innovative skills of individuals, and
 Promoting community spirit through unity and cooperation
3

4. Recycled Projects
Scrap Paper Notepad
4
Materials:
Scrap papers
Binder clips
Glue
Paintbrush
Decorative scrap paper
Masking or decorative tape

5. Scrap Paper Notepad
5
Procedure:
1. Fold into half at least 40 sheets of scrap paper. Cut paper on folded
side.
2. Stock the pages by lining up the cut folded sides together. Do this
on an even surface to be precise.
3. With all pages evenly lined up, attach the binder clips on the top and
bottom edges on the cut side of the paper. Lay it flat on the edge of
the table and place a heavy object at the center near the cut edge to
keep pages compressed.
4. Apply glue evenly over the cut edge then let it dry. Repeat this 4-5
times until you have a coat of clear glue that holds the edges
together.
5. Remove the clip binders once the glue has dried completely.
6. Attach your decorative paper by gluing it across the top of the
notepad.
7. Attach the tape carefully on top of the glued area. Decorate with
stickers, labels, or anything else

6. Recycled Projects
Desk Organizer
6
Materials:
6 empty plastic bottles (1 liter soft
drinks bottle)
Cutter and scissors
Decorative tape
Glue stick and glue gun

7. Desk Organizer
7
Procedure:
1. Clean the bottles and let it dry.
2. Measure around 2 ½ - 3 inches from the base of the
bottle going up then mark it all around.
3. Cut the marked area using a sharp cutter. Set aside
the upper part of the bottle for future recycling
projects.
4. Smoothen the cut edges using scissors.
5. Cover all the edges with decorative tape.
6. Glue together the five receptacles as seen below.
7. Decorate with stickers, labels, or anything else.

8. Recycled Projects
Tin Can Holder
8
Materials:
2-3 tin cans
Scraps of cloth or scrap papers
Glue stick and glue gun
½ inch wide ribbon (color
should match the cloth or
paper)

9. Desk Organizer
9
Procedure:
1. Remove the top cover of the tin can and smoothen
the cut edges by using a small hammer.
2. Wash the can with soap and water and let it dry
under the heat of the sun.
3. Glue the cloth or paper all around the sides of the
can. Let it dry.
4. Attach the ribbon around the top and bottom of the
can.
5. Accessorize your tin can holder.
6. Do the same procedure with the two remaining
cans.