Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Introduction to wood

1.795 Aufrufe

Veröffentlicht am

An introduction to lumber and sheetgoods for our Studio H students.

Veröffentlicht in: Bildung, Business
  • Als Erste(r) kommentieren

Introduction to wood

  1. 8. <ul><ul><ul><li>LUMBER: </li></ul></ul></ul><ul><ul><ul><li>2 types of wood: softwood (coniferous) and hardwood (deciduous) </li></ul></ul></ul><ul><ul><ul><li>drying occurs via air or kiln </li></ul></ul></ul><ul><ul><ul><ul><li>-wood is considered dry at or below 19% moisture content </li></ul></ul></ul></ul><ul><ul><ul><li>nominal vs. actual dimensions </li></ul></ul></ul><ul><ul><ul><li>2” increments 2,4,6,8,10,12 </li></ul></ul></ul><ul><ul><ul><li>Nominal 2x4 is actually 1.5”x3.5” </li></ul></ul></ul><ul><ul><ul><li>2 is 1.5” </li></ul></ul></ul><ul><ul><ul><li>4 is 3.5” </li></ul></ul></ul><ul><ul><ul><li>6 is 5.5” </li></ul></ul></ul><ul><ul><ul><li>8 is 7.25” </li></ul></ul></ul><ul><ul><ul><li>10 is 9.25” </li></ul></ul></ul><ul><ul><ul><li>12 is 11.25” </li></ul></ul></ul><ul><ul><ul><li>Lengths range from 8’ to 20’ in 2’ increments </li></ul></ul></ul>
  2. 26. <ul><ul><ul><li>SHEETGOODS: </li></ul></ul></ul><ul><ul><ul><li>the term sheetgoods is generic for any panelized product made of a wood fiber aggregate and adhesive </li></ul></ul></ul><ul><ul><ul><ul><li>- these include: plywood, MDF (medium density fiberboard), OSB (oriented strand board), particle board, homosote, masonite, etc. </li></ul></ul></ul></ul><ul><ul><ul><li>basic characteristics: </li></ul></ul></ul><ul><ul><ul><ul><ul><li>- dimensionally stable and consistent in thickness </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- easy to machine </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- grain is either variable or non-existent </li></ul></ul></ul></ul></ul><ul><ul><ul><li>nominal vs. actual: </li></ul></ul></ul><ul><ul><ul><ul><ul><li>- thickness is called out and sold in nominal terms while the actual dimension may vary </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- typically a 3/4 ” thick sheet of plywood will actually be 23/32 ” or 11/16 ” thick </li></ul></ul></ul></ul></ul><ul><ul><ul><li>plywood: </li></ul></ul></ul><ul><ul><ul><ul><ul><li>- always laminated with an odd number of plies with one exception - bending plywood </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- grain of overlapping plies run in alternating directions to provide diaphragmatic strength </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- surface quality is rated in letter grades A,B,C,D - ‘A’ being the best </li></ul></ul></ul></ul></ul><ul><ul><ul><ul><li>- a grade BC means one face will appear much cleaner and clearer than the other </li></ul></ul></ul></ul><ul><ul><ul><ul><ul><li>- typically, more plies = better quality = more $ </li></ul></ul></ul></ul></ul>
  3. 28. Importance of Building/Studio H
  4. 29. Importance of Building/Studio H

×