Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
EVANNEX Cubby Compartment Instructions for Tesla Model S and X
1. EVannex® — Tesla Aftermarket Accessories
3413 SW 14
th
Street •• Deerfield Beach, FL 33442 •• www.evannex.com
Disclaimer: Evannex is not responsible for any vehicle damage caused during the installation of this product. Any costs
associated with any vehicle damage are the sole reponsibility of the purchaser.
Cubby Compartment
Installation Instructions and Operational Notes
Thanks for purchasing Cubby Compartment. Please read these installation instructions in their
entirety BEFORE you attempt to install Cubby Compartment.
Cubby Compartment has been designed to provide a more efficient and ergonomic storage
solution for your Model S and Model X cubby. We’ve created an Installation Video that can be
viewed at www.evannex.com.
IMPORTANT: The installation of the Cubby Compartment is very simple and requires no tools
or other materials.
Quick Start Installation Steps:
Step 1. Clean out your cubby, being sure that all items in it are removed and that the rear
cubby wall is clean (see Figure that follows). You can use alcohol on a paper towel to clean
the rear interior wall of the cubby, if it appears dirty.
Step 2. Remove the white tape backing
for the magnetic plate (called a “keeper”)
as shown in Figure to the right. Be sure
the keeper is centered on the small
cylindrical magnet on the outer rear wall
of the Cubby Compartment.
Step 3. Slide the Cubby Compartment into
the cubby and press the front of Cubby
Compartment toward the front of the
vehicle so that the keeper adheres to the
back interior wall of the cubby.