Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.
Engineering Mechanics: Statics
The Laws of Dry Friction. Coefficients of Friction
• Block of weight W placed on horizontal...
Engineering Mechanics: Statics
The Laws of Dry Friction. Coefficients of Friction
• Four situations can occur when a rigid...
Engineering Mechanics: Statics
Angles of Friction
• It is sometimes convenient to replace normal force
N and friction forc...
Engineering Mechanics: Statics
Angles of Friction
• Consider block of weight W resting on board with
variable inclination ...
Engineering Mechanics: Statics
Problems Involving Dry Friction
. 8 - 5
• All applied forces known
• Coefficient of static ...
Engineering Mechanics: Statics
Sample Problem
SOLUTION:
• Determine values of friction force
and normal reaction force fro...
Engineering Mechanics: Statics
Sample Problem
SOLUTION:
• Determine values of friction force and normal
reaction force fro...
Engineering Mechanics: Statics
Sample Problem
• If maximum friction force is less than friction
force required for equilib...
Nächste SlideShare
Wird geladen in …5
×

6 friction fe

  • Als Erste(r) kommentieren

6 friction fe

  1. 1. Engineering Mechanics: Statics The Laws of Dry Friction. Coefficients of Friction • Block of weight W placed on horizontal surface. Forces acting on block are its weight and reaction of surface N. • Small horizontal force P applied to block. For block to remain stationary, in equilibrium, a horizontal component F of the surface reaction is required. F is a static-friction force. . 8 - 1 is required. F is a static-friction force. • As P increases, the static-friction force F increases as well until it reaches a maximum value Fm. NF sm µ= • Further increase in P causes the block to begin to move as F drops to a smaller kinetic-friction force Fk. NF kk µ=
  2. 2. Engineering Mechanics: Statics The Laws of Dry Friction. Coefficients of Friction • Four situations can occur when a rigid body is in contact with a horizontal surface: . 8 - 2 • No friction, (Px = 0) • No motion, (Px < Fm) • Motion impending, (Px = Fm) • Motion, (Px > Fm)
  3. 3. Engineering Mechanics: Statics Angles of Friction • It is sometimes convenient to replace normal force N and friction force F by their resultant R: . 8 - 3 • No friction • Motion impending• No motion ss sm s N N N F µφ µ φ = == tan tan • Motion kk kk k N N N F µφ µ φ = == tan tan
  4. 4. Engineering Mechanics: Statics Angles of Friction • Consider block of weight W resting on board with variable inclination angle θ. . 8 - 4 • No friction • No motion • Motion impending • Motion
  5. 5. Engineering Mechanics: Statics Problems Involving Dry Friction . 8 - 5 • All applied forces known • Coefficient of static friction is known • Determine whether body will remain at rest or slide • All applied forces known • Motion is impending • Determine value of coefficient of static friction. • Coefficient of static friction is known • Motion is impending • Determine magnitude or direction of one of the applied forces
  6. 6. Engineering Mechanics: Statics Sample Problem SOLUTION: • Determine values of friction force and normal reaction force from plane required to maintain equilibrium. • Calculate maximum friction force and compare with friction force required for equilibrium. If it is greater, block will not slide. . 8 - 6 A 100 lb force acts as shown on a 300 lb block placed on an inclined plane. The coefficients of friction between the block and plane are µs = 0.25 and µk = 0.20. Determine whether the block is in equilibrium and find the value of the friction force. greater, block will not slide. • If maximum friction force is less than friction force required for equilibrium, block will slide. Calculate kinetic-friction force.
  7. 7. Engineering Mechanics: Statics Sample Problem SOLUTION: • Determine values of friction force and normal reaction force from plane required to maintain equilibrium. :0=∑ xF ( ) 0lb300-lb100 5 3 =− F lb80−=F :0=∑F ( ) 0lb300- 4 =N . 8 - 7 :0=∑ yF ( ) 0lb300- 5 4 =N lb240=N • Calculate maximum friction force and compare with friction force required for equilibrium. If it is greater, block will not slide. ( ) lb48lb24025.0 === msm FNF µ The block will slide down the plane.
  8. 8. Engineering Mechanics: Statics Sample Problem • If maximum friction force is less than friction force required for equilibrium, block will slide. Calculate kinetic-friction force. ( )lb24020.0= == NFF kkactual µ lb48=actualF . 8 - 8

    Als Erste(r) kommentieren

    Loggen Sie sich ein, um Kommentare anzuzeigen.

  • NehalMohta

    Apr. 30, 2016
  • Mdnzaman

    May. 17, 2020
  • ShibuIssac1

    Aug. 29, 2020

Aufrufe

Aufrufe insgesamt

2.984

Auf Slideshare

0

Aus Einbettungen

0

Anzahl der Einbettungen

18

Befehle

Downloads

116

Geteilt

0

Kommentare

0

Likes

3

×