2. DEFINATION
The materials whose usage is applied at
temperature of >6000
C are considered as
refractories
According to ASTM(American Society For
Testing And Materials) C71 the definition of
refractories is:
Non-metallic materials having those
chemical and physical properties that made
them applicable for structures, or as
components of systems, that are exposed to
environments above 10000
F(800K,5000
C)
3. GENERAL PROPERTIES
These type of materials are stable at high
temperatures and also they retain their strength
at same
As their operating environment are different,
they need to be thermal resistant ,they must be
chemically inert
Also they must be having a specific range of
thermal conductivity and coefficient of thermal
expansion depending upon their working
conditions
Generally the materials used in manufacturing
of refractories are oxides of alumina, silica,
magnesia etc.
4. GENERAL PROPERTIES(CONT…..)
Oxides of calcium(lime) are also one of the
general refractories found. Fire clays are
also used in the manufacturing of
refractories
The highest referring melting pt. refractory is
hafnium carbide with a melting point of
39000
C(approx.)
5.
6. CHARACTERISTICS OF GOOD
REFRACTORY
Resistance against heat
Resistance against corrosion
Should have high fusing temperature
Ability to withstand high load
Should be chemically inert
Should not undergo deformation
Uniform expansion and contraction
7. CLASSIFICATION OF REFRACTORIES
The refractories are mainly classified on the basis
of chemical composition, fusion temperature,
method of manufacture
The classification is as follows:
9. BASED ON CHEMICAL COMPOSITION
ACIDIC REFRACTORIES: The main element in
this type of refractory is silica which reacts with
bases such as alkalies, lime, basic oxides etc
Also alumina(Al2O3) is the main component
along with silica
Mostly these are used in places where the
atmosphere is acidic and these type of
refractories are stable to acid attacks but the
converse is not true
The major use of these type of refractories is
done in steel and iron industries
10. BASED ON CHEMICAL
COMPOSITION(CONT…..)
BASIC REFRACTORIES: The key material
used in this type of refractory is
magnesia(MgO) or dolomite(MgCO3
+CaCO3) or chrome-magnesia(Cr2O3+MgO)
This type of refractory is used in work place
which has basic atmosphere(involving basic
chemicals)
These are stable to basic attacks but they
are affected by acidic attacks
11. BASED ON CHEMICAL
COMPOSITION(CONT…..)
NEUTRAL REFRACTORIES: These
refractories are used in areas where slag
and atmosphere is not fixed i.e. sometimes
acidic and sometimes basic
Examples of these kind of materials are
alumina(Al2O3),chrome(Cr2O3) and carbon
To avoid reaction between acidic bricks and
basic bricks we use the neutral bricks. The
neutral bricks are made up of graphite and
chromites
12. BASED ON FUSION TEMPERATURE
Based on Fusion temperature refractories
are classified in following:
NORMAL REFRACTORY: Fusion
temperature=1580-17800
C(ex: fire clay)
HIGH REFRACTORY: Fusion
temperature=1780-20000
C(ex: chromite)
SUPER REFRACTORY: Fusion
temperature>20000
C(ex: zirconia)
13. REFRACTORY ANCHORAGE
Anchorage systems are must for all
refractories. Anchorage systems such as
wire formed anchors, ceramic tiles etc.
support the refractory lining
The commonly used anchorage systems
have a rectangular or circular cross-section
The rectangular cross section can bear
higher weight and it is used for high
thickness refractory whereas the circular
cross section can bear low weight and is
used for low thickness refractory
14. REFFRACTORY ANCHORAGE(CONT…)
Refractories used for roofs demand the ability
to support the weight of refractory even at the
elevated temperatures and operating conditions
The amount of anchors used in the refractory is
dependent on the working conditions of the
refractory
The preference of anchors shape, materials,
size and numbers has significant impact on the
quality and life of refractory
15.
16. RERRACTORY HEAT-UP
Now after making of a new refractory lined
furnace or equipment the next step is to initiate
its working by heating it up in a controlled
manner
It is done in order to stop spalling(the method in
which the flakes of a material are broken from a
large body by projectile impact, corrosion,
cavitations etc.) or shortening of the materials
predicted lifetime
The technology which is used of heating up the
refractory must contain following features:
17. REFRACTORY HEAT-UP(CONT…)
1.Thermal homogeneity within all the
equipment
2.Thermal stability of the heat source
3.Safety of operation
4.Reproducibility(ability to reproduce)