1. CHRISMASSEY780.721.4862 · MASSEYC1@TELUS.NET
SKILLS
• Excellent organizational and prioritization skills
• Taught and mentored junior staff in technical/mechanical procedures
• Proficient in inventory and supply management
• Eagerly accepts change and challenges, adapting with minimal
instruction
• Enjoy working within a team environment and able to work
unsupervised
PROFESSIONAL ACHIEVEMENTS
TURBINE COMMISSIONING/INSTALLATIONS
2013
• One Titan 130 compressor unit for TCPL
• Two Titan 130 generator sets for Shell Canada
• Two Centaur 50 generator sets and one Taurus 60 generator set for
Arc Resources.
2012
• Four new installations at Alta Gas Harmattan: one Titan 130
generator
RETROFITS
2014
• A retrofit of a Centaur 50 to a Taurus 60 engine at Harvest Energy.
This retrofit also required the rear trunnion to be moved, machined
and welded. Generator bearings were exchanged with commissioning
of a new fuel module installation and controls. The generator
bearings and installation of the rear trunnion mount are outside
the scope of typical field service, but were carried out to ensure
deadlines were met due to the technical aspect of this job. The
customer has since approached Solar Turbines field service to assist
with construction of the power plant and final commissioning of the
Taurus 60 generator set.
• Participated as a key member of the project team for a wet seal to
dry gas seal exchange of two tandem body compressors for Fortis
B.C.
2013
• Five retrofits for Fortis BC Gas: two retrofits consisted of complete
replacement of the fuel system, control system and emergency circuit
for compressor seal system; the remaining three retrofits consisted of
replacing wet seal systems.
INTERNATIONAL ASSIGNMENT
• The Australian district approached the Canadian district to supply
them with a reliable Field Service Representative who was capable
of performing commissioning tasks in the Australian outback,
with limited resources and support. I was chosen to assist with
commissioning of two Taurus 70 compressor sets situated four hours
west of Brisbane in the Australian outback during July, 2014, while
the local Field Service Representatives were on a course. Assisted
the customer with process yard valve set up and assisted two
subcontractors to set up fuel skid and anti-surge systems.
SUMMARY
• Successful, driven field service representative with over 10 years’
experience
• Expert in turbine installations and retrofits on models: Titan 130,
Centaur 50, Taurus 60 & 70, and Saturns 10 & 20
• Adept in troubleshooting mechanical and electrical issues, on or
off site
• Able to work in high stress situations and successfully complete
challenging tasks within required time parameters and budgets
• Manage multiple projects while maintaining a high level of
customer service
WORK HISTORY
FIELD SERVICE REPRESENTATIVE LEVEL THREE, SOLAR
TURBINES OF CANADA, EDMONTON AB
AUGUST 2005 – JUNE 2015
Tasks included: engine removal/installations; alignments; trouble
shooting mechanical/electrical problems; general service of pack-
ages; retrofits and new installation of equipment. Experience with
Allan Bradley software, specifically RS networks; process control;
compressor seal systems.
2. CHRISMASSEY 780.721.4862 · MASSEYC1@TELUS.NET
EDUCATION
AIRCRAFT MAINTENANCE ENGINEER DIPLOMA, NORTHERN
LIGHTS COLLEGE, DAWSON CREEK, B.C.
Licensed Aircraft Maintenance Engineer M1 Rated, License #426215
TRAINING COURSES COMPLETED
Turbine Training Courses
• Compressor Performance, Solar Turbines, 2008
• Control System Logic – Relay for Solar Gas Turbine Generator Sets,
Solar Turbines, 2006
• Familiarization of CSI2120 & FastBal II, Emerson Process
Management, 2008
• Power Generation, Solar Turbines, 2008
• Health, Safety, Security and Environmental Management System
training (formerly QHSE), Solar Turbines, ongoing
• TT3 Applications and Principles, Solar Turbines, 2007
• TT4000 Applications and Principles, Solar Turbines, 2007
• Turbine Performance, Solar Turbines, 2009
• Turbine Teardown and Field Repair training, Solar Turbines, 2011 and
2014
• Turbotronic 4 Field Applications for System Operational Analysis,
Modification and Verification Techniques, Solar Turbines, 2008
• Turbotronic 4 Applied Principles for System Architecture and
Principles of Operation, Solar Turbines, 2008
Aircraft Maintenance Courses
• Allison 250 C20 Engine, Field Maintenance Endorsement, Northern
Lights College, 2000
• Bell 206 Series Airframe , Field Maintenance Endorsement, Northern
Lights College, 2000
• Eurocopter AS350 Series Airframe, Field Maintenance Endorsement,
Northern Lights College, 2002
• Lycoming LTS101 Turbine Engine Operating Conference, Honeywell
Engines, Systems and Services, 2003
• Turbomeca Arriel I Engine, Field Maintenance Endorsement, Northern
Lights College, 2002
Miscellaneous Courses
• Arc Flash & Low Voltage Safety, Canada Training Group, Inc., 2009
• Defensive Drivers Training (ongoing, required on a biannual basis)
• Driver’s License, Classes 1 and 6, air brakes endorsement
• Standard First Aid, 2014
• H2S Training, 2014
• Human Factors Training Seminar, Airworthiness Resources
Corporation, 2004
• Rigging and Safety Upgrading (Lifting and Rigging course), NAIT
• Technical Writing, Rockhurst University Continuing Education Centre,
Inc., 2010