1. BENJAMIN NWOSA
08034831145
senatorbc@yahoo.com
Professional Affiliations:
Graduate Member Nigeria Institute of Management (GMNIM)
Corporate member Nigerian society of Engineers (MNSE)
Member Council for Regulations of Engineering in Nigeria (COREN)
Member Institute of Electrical and Electronics Engineers (IEEE)
Academic Qualification:
2001- 2006 University of Nigeria
B.Eng, Electrical Engineering,
Second Class Honours.
Career Summary:
Over Seven (7) years Electrical Engineering experience in oil and gas industry. Having experience in
all phases of electrical design for FEED and detailed design which include preparation of
specification, data sheets, drawing preparation,and selection of materials and equipment for projects,
both onshore and offshore, supports procurement and bidding activities, field engineering and
commissioning support. The detailed experience and skill include the following:
1.Electrical calculation and sizing, which includes , cable sizing calculation, lighting calculation, panel
sizing, generator sizing, etc.
2.Preparation of engineering deliverables which include study reports, calculation reports,
specifications, design basis, data sheets, material take off, etc.
3.Drawings preparation with AUTOCAD which includes one line diagram, area classification, layout
drawings, schematic, wiring interconnection diagram, detailed installation drawings, etc.
4.Familiar with standards & codes which include NEC, IEC, NEMA, API, IEEE, etc.
Professional Profile:
Undergone extensive training in power system design philosophies and electrical systems.
Possesses clear understanding of power cables sizing and electrical equipment selection.
A keen drive for professional development.
Adheres to Health, Safety and Environment (HSE) policies for project execution.
Ensures economical design methods.
Diligent, adaptable, flexible and a good team spirit
Technical skills:
*Proficient in
Good knowledge of Microsoft office packages
Proficient knowledge and mastery of AutoCAD & AUTOPLANT software packages
Capable of modeling a CABLE TRAY with AUTOPLANT
Capable of modeling a CABLE TRAY with PDMS
2. `
Job Experience:
Atlas International Engineering Services. February 2008 - Till Date
Position: Electrical Engineer
Projects:
Okan Sat 1 & Sat 2 Fire Fighting Systems Project – (FEED)
Client: Chevron Nigeria Limited
DURATION: 6 months
Responsibilities:
• Developed the Single line diagrams
• Developed Electrical load list
• Sizing of power cables
• Developed cable schedules
• Developed cable tray layout
• Hazardous Area Classification drawings,
• Lighting and small power layout
• Equipment grounding details
• Electrical Equipment data sheets, specifications
• Electrical Material Take-off
Escravos Export Pipeline Project – (FEED/DED)
Client: Chevron Nigeria Limited
DURATION: 10 months
Responsibilities:
• Electrical Single line diagrams
• Cable Schedule
• Electrical Hazardous Area classification Drawings
• Electrical Cable routing
• Electrical MTO
• Electrical installation detail drawings
Provision of Fire Water System Facilities -
Client: West African Gas Pipeline Company (WAPCO)
Responsibilities:
• Electrical Consumer Lists & Balances,
• Electrical Equipment List,
3. • Electrical One Line diagrams,
• Electrical Power System studies and calculations
• Typical Control schematics for Motors,
• Hazardous Area Classification drawings,
• Cable routing plans,
• Cable routing and cable tray layout plans,
• Electrical tie-in drawings and details for new facilities integration,
• Electrical Cable schedules,
• Electrical Equipment data sheets, specifications and requisitions (Procurement
technical support),
• Electrical Material Take-off
Project:
AJAOKUTA-ABUJA-KATSINA GAS PIPELINE PROJECT (FEED & D.E.D) .
( OVER $80 MILLION) FOR TWO (2) YEARS DURATION.
Client: Ministry of Petroleum Resources, Abuja, Nigeria.
Responsibilities:
• Update and development of the One Line Diagrams,
• Update and development of the Electrical design philosophy,
• Electrical Consumer Lists & Balances,
• Electrical Equipment List,
• Electrical One Line diagrams,
• Electrical Tie-in plans,
• Hazardous Area Classification drawings,
• Electrical Technical Rooms layout plans,
• Major Underground cable routing plans,
• Major Above ground cable routing and cable tray layout plans,
• Electrical tie-in drawings and details for new facilities integration,
• Electrical Cable schedules,
Project:
ESCRAVOS SYSTEM EXPORT PROJECT (FEED & D.E.D) .
( OVER $20 MILLION) FOR ONE AND HALF (1 ½) YEARS DURATION.
Client: Chevron Nigeria Limited
Responsibilities:
• Electrical Consumer Lists & Balances,
• Electrical Equipment List,
• Electrical One Line diagrams,
• Electrical Power System studies and calculations,
• Hazardous Area Classification drawings,
• Electrical Technical Rooms layout plans,
• Major Underground cable routing plans,
• Major Above ground cable routing and cable tray layout plans,
4. RWE-120 CONVERSION OF TANK 3 TO DUAL SERVICE (D.E.D).
(OVER $10 MILLION) FOR SIX (6) MONTHS DUARTION.
Responsibilities:
Review and verify the completed DED package from DeltaAfrik, including updating the
existing drawings as necessary, and determining any additional Scope of Work.
• Prepare all necessary drawings, schedules, data sheets, MTO’s.
• Perform design calculations necessary to select and size the electrical facilities and
distribution systems. These calculations will include, but are not limited to, cable/wire
sizing and selection, switching equipment and overload calculations, light illumination
calculation, grounding & bonding and lightning protection etc.
• Review and verify all new electrical installations and modifications implemented by
TVM project and incorporate them accordingly into DED where necessary.
Project:
CHEVRON NGERIA LIMITED (CNL) ,TANKS 1,10,2, & 8 REPAIR AND UPGRADE
PROJECT.
(OVER $7 MILLION) FOR SIX (6) MONTHS DURATION.
• Prepare all necessary drawings, schedules, data sheets, MTO’s and other
related documents necessary for project realization.
• Perform design calculations necessary to select and size the electrical facilities and
distribution systems. These calculations will include, but are not limited to, cable/wire
sizing and selection, switching equipment and overload calculations, light illumination
calculation, grounding & bonding and lightning protection etc.
• Review and verify all new electrical installations and modifications implemented by
TVM project and incorporate them accordingly into DED where necessary.
Project:
CHEVRON NGERIA LIMITED (CNL) ,MEREN WIP REVAMP STAGE 2 DED. (OVER $19
MILLION) FOR EIGHT (8) MONTHS DURATION.
Review FEED study and verify Electrical recommendations.
• Review all platform lighting / emergency lighting to identify areas for
refurbishment / upgrade. Minimum lighting levels to be in accordance with
API14F.
• Review all existing equipment loads to confirm integrity of the present system.
Contractor to prepare a load study report, to consider existing loads and loads
subsequent to proposed system modifications.
• Provide scope of work, including all necessary design documentation, detailing
system modifications.
• Identify the load requirements for the new control room and evaluate spare capacity.• Produce
specifications for:• Identify any additional load requirements and evaluate spare capacity.
• Produce Asbuilt Electrical equipment layouts for MCC building and identify
equipment for replacement / refurbishment.
5. Branch Manager – FABO Network Communication Ltd, Abuja - April to June 2008
National Youth Service Corps (NYSC) – Power Holding company of Nigeria PLC (PHCN), Business
Unit Dutse, Jigawa State - March 2007 - February 2008
Students Industrial Work Experience Scheme (SIWES) – Suburban telecoms LTD., Lagos – May to
November 2005
President NYSC – Mass Literacy CDS Group Dutse Jigawa State – March to February 2008
Secretary General – National Association of OBA Undergraduates Students – 2003 to 2004
Public Relations officer - Nigerian Universities Engineering Students Association (NUESA)
University of 2002 to Nigeria Chapter – 2003
Referees:
To be provided upon request.
6. Branch Manager – FABO Network Communication Ltd, Abuja - April to June 2008
National Youth Service Corps (NYSC) – Power Holding company of Nigeria PLC (PHCN), Business
Unit Dutse, Jigawa State - March 2007 - February 2008
Students Industrial Work Experience Scheme (SIWES) – Suburban telecoms LTD., Lagos – May to
November 2005
President NYSC – Mass Literacy CDS Group Dutse Jigawa State – March to February 2008
Secretary General – National Association of OBA Undergraduates Students – 2003 to 2004
Public Relations officer - Nigerian Universities Engineering Students Association (NUESA)
University of 2002 to Nigeria Chapter – 2003
Referees:
To be provided upon request.