SlideShare ist ein Scribd-Unternehmen logo
1 von 1907
Downloaden Sie, um offline zu lesen
PR STUFF,[object Object]
FABRICATION AND MANUFACTURE,[object Object]
When setting a grommet, the collar size must match the punch size?(True/False),[object Object]
TRUE,[object Object]
When using a grommet set to install a grommet, what should you use to strike the punch?,[object Object]
Rawhide Mallet,[object Object]
What is the most common type fastener used on clothing?,[object Object]
Glove Fastener,[object Object]
Which of the following type fasteners would you use if you needed extra security?,[object Object]
Three way locking,[object Object]
Three-way locking snaps are supplied in how many sizes?,[object Object]
One,[object Object]
Curtain type fasteners are available in how many sizes?,[object Object]
Two,[object Object]
What method is used to clean grease and dirt from a slide fastener?,[object Object]
Stoddard Solvent,[object Object]
Why should you use yellow beeswax on hand sewing thread?,[object Object]
-It contains no oil- To prevent fraying and untwisting,[object Object]
Which hand stitch should you use when a neat appearance is necessary to the seam?,[object Object]
Hidden,[object Object]
What type of needle is used to make a hidden stitch?,[object Object]
2 ½ inch curved,[object Object]
Which of the following is used to temporarily hold a seam together?,[object Object]
Basting,[object Object]
Which of the following stitches should you use if a sewing machine is not available?,[object Object]
Running,[object Object]
Which of the following stitches is used to sew an eyelet onto a parachute container?,[object Object]
Overthrow,[object Object]
After cleaning a slide fastener which of the following lubricants should you use to lubricate it?,[object Object]
Oil or Graphite,[object Object]
To shorten an interlocking slide fastener, the chain should be how much shorter than the opening in the material?,[object Object]
½”,[object Object]
Slide fasteners are available in how many types?,[object Object]
Two,[object Object]
Slide fasteners are available in how many sizes?,[object Object]
Five,[object Object]
What grade of slide fastener is made from brass?,[object Object]
Grade I,[object Object]
Which of the following stitches is a U.S. standard lock stitch?,[object Object]
301,[object Object]
If your thread should break while sewing a seam, you should start sewing again?,[object Object]
½” behind the break,[object Object]
What type of seam would you make if you laid one piece of material on top of another and ran a row of stitches down one side?,[object Object]
Superimposed,[object Object]
There are how many classes of seams?,[object Object]
3,[object Object]
What is the simplest knot used to join two cords together?,[object Object]
Binders,[object Object]
What knot is used to secure the parachute suspension lines to the connector links?,[object Object]
Clove Hitch,[object Object]
What is the most commonly used knot to join two cords together?,[object Object]
Square,[object Object]
What knot would you use for a safety tie on ripcord pins?,[object Object]
Half-hitch,[object Object]
Why is a bias cut used to manufacture a parachute?,[object Object]
-save material-prevent tearing between two sections-provide elasticity,[object Object]
Bias cuts are made at what angle to the filling threads?,[object Object]
45 degrees,[object Object]
Which of the following is another name used for filling threads?,[object Object]
Woof, Weft, Pick,[object Object]
Threads that run lengthwise and parallel to the selvage edge are called?,[object Object]
Warp,[object Object]
What is the basic unit used in the fabrication of textile yarns and fabrics?,[object Object]
Fiber,[object Object]
What is the edge of material called that has a woven finish to prevent raveling?,[object Object]
Selvage Edge,[object Object]
Which type of weave gives the smoothest finish and is the easiest to manufacture?,[object Object]
Plain,[object Object]
What are the basic weaves?,[object Object]
Plain and Twill,[object Object]
The definition of cloth is any material that is over how many inches from selvage edge to selvage edge?,[object Object]
12,[object Object]
What determines the weight of a cloth?,[object Object]
Ounces per square yard,[object Object]
What name is given to the force required to break material?,[object Object]
Tensile strength,[object Object]
Heat is less damaging to cotton than it is to synthetic fibers.(True/False),[object Object]
True,[object Object]
Exposure to what element would cause the most serious damage to nylon material?,[object Object]
Direct Sunlight,[object Object]
An ideal storage area for textile material would be dry and out of direct sunlight, with a temperature of how many degrees?,[object Object]
70oF,[object Object]
Webbings are defined as material that is less than how many inches from selvage edge to selvage edge?,[object Object]
12”,[object Object]
At approximately 700 F, Nomex fabric will begin to do what?,[object Object]
Char,[object Object]
Textile tapes can weigh up to how many ounces per square yard?,[object Object]
15,[object Object]
What is the percentage of elasticity in nylon?,[object Object]
100%,[object Object]
What percentage can nylon be stretched without being damaged?,[object Object]
18 to 40%,[object Object]
Military specifications for parachute materials require that after 50 hours of exposure to sunlight, parachute fabrics should not lose more than what percent of its original strength?,[object Object]
25%,[object Object]
What does the term “moisture regain” mean when referring to fibers?,[object Object]
percentage of moisture it absorbs from the air ,[object Object]
Nylon has what percentage of moisture regain?,[object Object]
4.2,[object Object]
What is the melting point of nylon material?,[object Object]
482 F,[object Object]
A carpenter’s square has arm measurements of how many inches?,[object Object]
18 and 24,[object Object]
A properly set chuck and die will have a clearance of how many inches?,[object Object]
1/32”,[object Object]
SEWING MACHINES,[object Object]
What size needle should you use to sew elastic webbing?,[object Object]
24,[object Object]
What size needle would you use if you were going to sew five piles of nylon using type “E” thread?,[object Object]
20,[object Object]
What determines the correct size of needle to be used on a project?,[object Object]
-type of thread-size of thread-material to be sewn,[object Object]
What determines the size of a needle?,[object Object]
Diameter of the needle and the size of the eye,[object Object]
When selecting a needle to be used on cloth, which type of point would you select?,[object Object]
Sharp round point,[object Object]
What is the recommended setting of the feed dogs for lightweight material?,[object Object]
Slightly less than one tooth above the throat plate,[object Object]
When adjusting the feed eccentric on the 31-15, the stitch regulator should be set at its lowest position. This is done so the machine will do what?,[object Object]
Form its longest stitch,[object Object]
What, if anything, is the purpose of the grooves on both sides of a 16x87 sewing machine needle?,[object Object]
Allow the thread to fall back into the needle when it enters the material,[object Object]
A properly timed needle bar will have the point of the shuttle how far above the eye of the needle on its upstroke?,[object Object]
1/16”,[object Object]
What is the proper class and variety of the needle used in the 31-15 machine?,[object Object]
16x87,[object Object]
When the point of the needle reaches the material, the feed dogs should be at what position?,[object Object]
On the down stroke and even with the throat plate,[object Object]
Sewing machines are classified as how many basic types?,[object Object]
2,[object Object]
Sewing machines have how many basic parts?,[object Object]
4,[object Object]
Which stitch is the most commonly used and made by sewing machines?,[object Object]
Lock stitch,[object Object]
When the bobbin is properly threaded into the bobbin case, the bobbin will turn clockwise when the free end of thread is pulled.(True/False),[object Object]
True,[object Object]
What should you do to prevent the needle thread from fouling when you start to sew?,[object Object]
Hold both threads for the first 2-3 stitches,[object Object]
When regulating the tension on the needle thread, you must remember that the,[object Object]
presser foot must be down,[object Object]
A properly formed stitch will have the threads locking in which position?,[object Object]
In the center of the thickness of material,[object Object]
What is used to regulate the pressure on the material?,[object Object]
The pressure-regulating thumbscrew,[object Object]
If the thread take-up spring is not correctly set, you should loosen the setscrew in the arm of the machine and turn the tension adjusting stud in which direction to lessen the movement of the spring?,[object Object]
To the left,[object Object]
The class 7-33 sewing machine is intended for what type of work?,[object Object]
Sewing heavy canvas,[object Object]
What is the difference between the 7-31 and 7-33 sewing machines?,[object Object]
The 7-31 has a clutch on the balance wheel,[object Object]
To set a needle bar that has no timing marks, you must first set the feed eccentric to how many stitches per inch?,[object Object]
8,[object Object]
The eye of the needle should be how far below the sewing hook when it is set properly?,[object Object]
1/16”,[object Object]
When centering the feeding action, what is the distance between the needle bar and the pressure bar?,[object Object]
17/32”,[object Object]
The 111 W 152 sewing machine has alternating pressers with a lift of how many inches?,[object Object]
3/8”,[object Object]
The 111 W 154 sewing machine has a presser foot lift of how many inches?,[object Object]
½”,[object Object]
On a 111 W class sewing machine, what would indicate that the bobbin case needs oil?,[object Object]
green felt pad,[object Object]
The needle that is used in a rotary sewing machine has how many parts?,[object Object]
7,[object Object]
When replacing the bobbin in the 7-33 sewing machine, you should leave about how many inches of the thread free from the shuttle?,[object Object]
3,[object Object]
The class 111 sewing machines are capable of sewing up to how many stitches per minute?,[object Object]
3,000,[object Object]
Which part of a class 111 sewing machine reengages the needle with the hook driving assembly after clearing a thread jam?,[object Object]
safety-clutch lock stud,[object Object]
What is the first step in timing a 111 W series sewing machine?,[object Object]
Set the eccentric on 0 spi,[object Object]
The class 111 W 151 sewing machine has what type of feeding action?,[object Object]
Compound feed only,[object Object]
How is the bobbin thread tension regulated on a rotary type sewing machine?,[object Object]
A small screw on the outside of the bobbin case,[object Object]
What feature on the 211 W 151 sewing machine prevents damage to the sewing hook?,[object Object]
Safety clutch,[object Object]
What is the maximum speed of the 211 W 151 sewing machine?,[object Object]
4,000 rpm,[object Object]
What needle is used in the 211 W 151 machine?,[object Object]
135 x 7 or 135 x 17,[object Object]
With ¼” clearance under the presser foot, what needle is used on a 211 W 151 sewing machine?,[object Object]
135 x 7,[object Object]
What needle would you use with a clearance of 3/8”?,[object Object]
135 x 17,[object Object]
When setting the needle into a 211 W 151, which direction should the long thread groove face?,[object Object]
To the left,[object Object]
What type of stitch is formed by a model 99R-3 sewing machine?,[object Object]
308,[object Object]
What will happen if you turn the zigzag regulating knob clockwise as far as it will go on a model 99R sewing machine?,[object Object]
It will sew a straight stitch,[object Object]
What is the maximum throw of the needle bar on a class 143 W 2 sewing machine?,[object Object]
3/16”,[object Object]
When setting the relative position of the presser and needle bar on a 211 W 151 machine, how much clearance must be maintained?,[object Object]
17/32”,[object Object]
A properly set feed dog on a 211 W 151 machine will show a full tooth above the throat plate when the feed dog is at its lowest position.(True/False),[object Object]
False,[object Object]
The hook saddle on a 211 W 151 machine is lubricated by which method?,[object Object]
An oil resevoir,[object Object]
What is the maximum throw of the 143 W 3 needle bar?,[object Object]
5/16”,[object Object]
Which direction does the long thread groove face on the 143 W 3 sewing machine?,[object Object]
Forward,[object Object]
What type of oil is recommended for oiling a sewing machine?,[object Object]
10W mineral,[object Object]
A sewing machine that is in constant use should be oiled how often?,[object Object]
Twice a day,[object Object]
What is the stitch range of the 31-15 machine?,[object Object]
7-32 SPI,[object Object]
What is the recommended stitches per minute for the 31-15 machine?,[object Object]
2,200 ,[object Object]
The 31-15 sewing machine can sew canvas up to a maximum of how many ounces?,[object Object]
8,[object Object]
Material that is being sewn on a sewing machine is held in position by what part?,[object Object]
Presser foot,[object Object]
What part of a sewing machine forms the stitch?,[object Object]
Rotary hook or oscillating shuttle,[object Object]
SEWING MACHINE REPAIR,[object Object]
When you are installing the hook driving shaft lock ratchet, the flange and setscrews face the left of the machine.(True/False),[object Object]
True,[object Object]
When installing the presser bar into the machine head, you should insert it through the upper bushing about,[object Object]
3 ½”,[object Object]
Before you insert the needlebar rock frame assembly, the needlebar connecting link must be at its lowest position.(True/False),[object Object]
True,[object Object]
When the bobbin case opener is properly installed, it is in what position?,[object Object]
The curved end points toward the bobbin case,[object Object]
What total number of spline grooves are on a hook driving shaft?,[object Object]
5,[object Object]
On the hook driving shaft, the end with a spline is installed first into the right hook driving shaft bearing.(True/False),[object Object]
False,[object Object]
When reassembling a sewing machine what part should you install first?,[object Object]
Hook/Saddle Assembly,[object Object]
Before reassembling a sewing machine, what do you use to smooth rusty parts?,[object Object]
Grinding compound,[object Object]
Which part eliminates end play in the balance wheel and arm shaft?,[object Object]
Balance wheel adjusting screw,[object Object]
What part controls the feeding mechanism of the sewing machine?,[object Object]
Feed Driving Eccentric,[object Object]
What part transfers the motion from the arm shaft to the needlebar?,[object Object]
Needlebar Driving Stud,[object Object]
What part converts the longitudinal motion of the hook driving shaft to the horizontal motion of the sewing hook?,[object Object]
Hook Driving Gear,[object Object]
What part allows the thread to pass between the bobbin case and the throat plate?,[object Object]
Bobbin Case Opener,[object Object]
What is used to remove the needlebar crank friction washer from the sewing machine after you remove the arm shaft?,[object Object]
Index Finger,[object Object]
What part prevents side to side movement of the needlebar rock frame?,[object Object]
Needlebar Rock frame position bracket,[object Object]
Which screw is loosened a ¼” and is NOT to be removed when you disassemble the 111 W 155?,[object Object]
Presser bar spring support screw,[object Object]
What screw has a left-hand thread?,[object Object]
Thread take-up lever retaining screw,[object Object]
If binding should occur while removing the presser bar, what action should you take?,[object Object]
Insert a screwdriver into the lower slot of the presser bar while applying an upward motion on the presser bar,[object Object]
When you remove the presser bar, what parts will fall off?,[object Object]
Presser bar spring bracketReleasing bracketGuide lever,[object Object]
What is the clearance between the presser foot and the throat plate of the 31-15?,[object Object]
5/16”,[object Object]
Which is the stitch range on the Consew C-30?,[object Object]
7 to 32 spi,[object Object]
When you set the needlebar and it starts its upstroke, what is the distance of the hook in relation to the eye of the needle?,[object Object]
1/16” above,[object Object]
What is the main timing point on a 31-15 sewing machine?,[object Object]
Needlebar,[object Object]
The 31-15 will sew canvas up to ,[object Object]
8 oz,[object Object]
To set the feeding action on a 31-15, you must loosen what screws?,[object Object]
Feed-driving rock shaft crank pinch screw,[object Object]
When timing the pressure lifting eccentric, your should set the sewing machine at,[object Object]
3 ½” SPI,[object Object]
When adjusting the thread tension and you cannot properly adjust it with the upper thread tension disc, what action should you take?,[object Object]
Adjust the bobbin tension,[object Object]
What is the purpose of the thread controller spring?,[object Object]
It prevents the needle from piercing the thread,[object Object]
If your machine is hard to turn after you time and adjust it, what action would you perform?,[object Object]
Check the feeding action,[object Object]
The 111 W 155 may be operated at what maximum number of stitches per minute?,[object Object]
3,500,[object Object]
The 111 W 155 has a stitch rangeof,[object Object]
3 ½ to 32,[object Object]
What component holds the material as the needle is raised and moves forward for another bight?,[object Object]
Lifting Presser,[object Object]
In which direction will the 111 W 155 machine move the fabric being sewed?,[object Object]
Away from the operator,[object Object]
The 11 W 152 has a stitch range of,[object Object]
5 to 32,[object Object]
The single needle, rotary axis 111 W 155 makes which federal stitches?,[object Object]
301,[object Object]
The 111 W 155 features a rotary axis; to what component does this term apply?,[object Object]
Sewing hook,[object Object]
The feeding action of the 111 W 155 allows which components to move in unison? ,[object Object]
Vibrating presser, needle, feed dogs,[object Object]
What is the maximum presser foot lift for the 111 W 155?,[object Object]
½”,[object Object]
Compressed air should never be used to clean a sewing machine(True/False),[object Object]
False,[object Object]
What is the maximum presser foot lift for the 111 W 151?,[object Object]
3/8”,[object Object]
The 111 W 155 and 151 are similar in most features except that the 151 has only one,[object Object]
Presser foot,[object Object]
An accumulation of dust and dirt will cause the same sluggish operation problem as a loose power belt.(True/False),[object Object]
True,[object Object]
After using a sewing machine, you should clean and oil it.(True/False),[object Object]
True,[object Object]
An excessive amount of oil on the working parts of any machine will probably result in what condition?,[object Object]
Soil the project being sewn,[object Object]
At what minimum interval should sewing machines be given a thorough cleaning and oiling?,[object Object]
Every 12 months,[object Object]
A clean dust should be used to clean all parts EXCEPT the,[object Object]
Arm shaft,[object Object]
If unable to obtain the recommended oil required by the manufacture, you may use what oil as a substitute?,[object Object]
Mineral Oil,[object Object]
Continual malfunction of a machine is most likely caused by what condition?,[object Object]
Out of timing sequence,[object Object]
Which part prevents the needle from striking the sewing hook?,[object Object]
Hook guard,[object Object]
What part controls the feeding motion provided by the alternating pressers?,[object Object]
Presser lifting eccentric,[object Object]
Which method is used to adjust the hook guard?,[object Object]
Bend the hook guard,[object Object]
What action allows you to adjust the movement of the feed dogs?,[object Object]
Loosen the feed driving crank pinch screw,[object Object]
To time the sewing hook and the needlebar on the machine, you should remove what parts?,[object Object]
Throat PlateFeed DogsPresser Foot,[object Object]
To set the 111 W class to its maximum stitch length, what do you do?,[object Object]
Depress the plunger and turn the balance wheel toward the operator,[object Object]
Complete disassembly of the 111 W 155 is necessary to properly set the timing sequence.(True/False),[object Object]
False,[object Object]
When the arm shaft is timed with the hook drive shaft, it is necessary to turn the balance wheel toward the operator until which of the following components reaches its highest position?,[object Object]
Thread take-up lever,[object Object]
In timing the arm shaft with the hook drive shaft, you must align the timing mark on the timing plate with the timing mark on what part?,[object Object]
Arm shaft,[object Object]
After timing the arm shaft with the hook drive shaft, you should perform what action?,[object Object]
Install the motor drive belt,[object Object]
What action prevents the needle from wandering from side to side?,[object Object]
Ensure the needlebar rock frame hinge stud  and guide bracket are tight,[object Object]
CARBON DIOXIDE,[object Object]
What color is CO2?,[object Object]
colorless,[object Object]
How often should be crankcase be serviced?,[object Object]
yearly,[object Object]
In its dry ice form, CO2 has what temperature?,[object Object]
-110 F,[object Object]
What is the weight of the CO2 charge for and LR-1 life raft?,[object Object]
.50,[object Object]
To properly record the weight of a CO2 cylinder, you must use a scale that is graduated in,[object Object]
1/100 lb,[object Object]
What is the TARE weight of a CO2 cylinder?,[object Object]
Empty weight plus the valve and cable assembly,[object Object]
How often is the commutator lubricated on a CO2 transfer unit?,[object Object]
never,[object Object]
At a temperature of 72, CO2 gas can be converted into a liquid by applying how many psi?,[object Object]
600,[object Object]
Depending on temp and pressure, CO2 can take on how many different forms?,[object Object]
3,[object Object]
What effect does 3 % of CO2 in the atmosphere have on the human body?,[object Object]
Doubles breathing effort,[object Object]
In its gaseous form, CO2 is how many times heavier than air?,[object Object]
1.53,[object Object]
All markings on a CO2 cylinder must be what color?,[object Object]
Black,[object Object]
What action would you take if a CO2 cylinder showed evidence that it had been in a fire?,[object Object]
Return it to supply,[object Object]
If the cylinder being recharged ceases to gain weight, the CO2 in the supply cylinder may be below what minimum weight?,[object Object]
10 lbs,[object Object]
How often should the oil be checked in the CO2 transfer pump?,[object Object]
monthly,[object Object]
If a CO2 cylinder has a dent exceeding 1/16” in depth, what should you do?,[object Object]
Reject it and return it to supply,[object Object]
Information on a CO2 cylinder must include what?,[object Object]
Tare weight, Gross weight, Weight of CO2,[object Object]
Why is it recommended to invert the CO2 supply cylinder when recharging it?,[object Object]
CO2 will remain cooler, allowing it to transfer faster,[object Object]
A standard supply cylinder will contain approximately how many pounds of liquid CO2 at a temp of 70 F?,[object Object]
38,[object Object]
A CO2 recharge unit will pump CO2 in what form?,[object Object]
Liquid form only,[object Object]
If a person has been overcome by CO2, what first aid techniques should be used?,[object Object]
Give artificial resuscitationAdminister oxygenKeep them warm,[object Object]
If a person breathed air that had 10% CO2 what would be the effect on the human body?,[object Object]
Unconsciousness,[object Object]
What lubricant is used on the idler shaft?,[object Object]
Light Cup Grease,[object Object]
How often should the idler shaft be lubricated?,[object Object]
Every 6 months,[object Object]
The piston rod should be lubricate with,[object Object]
Vaseline,[object Object]
CO2 cylinders must be painted what color?,[object Object]
Gray,[object Object]
CO2 Transfer Equipment,[object Object]
The SC-5 is designed to work with a pressure of how many psi?,[object Object]
3500,[object Object]
What prevents any recoil in the event the safety disc ruptures?,[object Object]
Safety Disc Nut,[object Object]
The SC-5 has a flangable safety disc that is designed to release pressure in the pump at what maximum pressure range?,[object Object]
2650-3000,[object Object]
The SC-5 requires which type of oil?,[object Object]
SAE 30,[object Object]
Gear teeth should be lubricated with,[object Object]
Thin coating of light cup grease,[object Object]
The multibreaker on the Walter Kidde operates on what total number of amperes?,[object Object]
20,[object Object]
What procedure must you use to lubricate the bearing housing on the electric motor?,[object Object]
Disassemble the bearing housing,[object Object]
How much oil does the Walter Kidde crankcase hold?,[object Object]
1 pint,[object Object]
What maximum temperature can a winterized cylinder be subjected to without rupturing the safety disc?,[object Object]
160 f,[object Object]
What motor oil is used in the crankcase of the Walter Kidde?,[object Object]
SAE 20,[object Object]
How much grease should you apply to each bearing?,[object Object]
½ oz,[object Object]
CO2 is stored under what pressure and at what temp?,[object Object]
850 psig @ 70 F,[object Object]
How much nitrogen is required to winterize the CO2 cylinder?,[object Object]
200 psi,[object Object]
How many pounds of CO2 are there in a standard supply cylinder?,[object Object]
50,[object Object]
The Walter Kidde comes with what motor?,[object Object]
¾ hp,[object Object]
When should you replace the piston rod packing on the SC-5?,[object Object]
Every 2 years,[object Object]
How often is the idler shaft lubricated?,[object Object]
Every 6 months,[object Object]
How often should you change the oil in the crankcase of the SC-5?,[object Object]
annually,[object Object]
What is the purpose of the flanged-type packing nut?,[object Object]
Holds the packing in place,[object Object]
The piston rod should be lubricated every 6 months with a light coating of,[object Object]
vaseline,[object Object]
What is the purpose for running-in a new pump?,[object Object]
Check the lubrication,[object Object]
To prevent the expansion of CO2 in the supply hose, the valve should have an opening of at least,[object Object]
1/8”,[object Object]
If you are required to change the electrical plug on a SC-5 the ground wire is what color?,[object Object]
white,[object Object]
The motor for the Walter Kidde operates at,[object Object]
1750 rpm,[object Object]
To replace the safety disc on the FLU-6, you need a torque wrench, a 5/16 socket and a,[object Object]
Piece of hex 5/16 x 2”,[object Object]
How often should you change the oil in the Walter Kidde crankcase?,[object Object]
150 hours of operation,[object Object]
If it is necessary to wire the SC-5 for 220 power, where can you find information on the wiring diagram?,[object Object]
On the nameplate,[object Object]
When adding oil to the SC-5 that does not have a dip stick, you should fill the crankcase to what level?,[object Object]
¼” from the top of the cup,[object Object]
Motor bearings contain enough grease to keep the bearing lubricated for how long?,[object Object]
2 years,[object Object]
Other than the crankcase, the SC-5 has how many other lubrication points?,[object Object]
1,[object Object]
When lubricating the idler gear and pulley shaft, you should use what type of lubricant?,[object Object]
Light cup grease,[object Object]
What should you use to clean the motor commutator on the SC-5?,[object Object]
Dry piece of lint-free cloth,[object Object]
If a leak should develop at the lower end of the plunger, what type of tool should you use to correct the problem?,[object Object]
Special rod approximately 3/8” x 6”,[object Object]
The SC-5 will transfer approximately how many pounds of CO2 out of a full supply cylinder?,[object Object]
38,[object Object]
What motor is standard equipment on the SC-5?,[object Object]
1 hp,[object Object]
The safety disc used in the Walter Kidde pump has what range?,[object Object]
2650-3000 psi,[object Object]
The ICC requirement for testing a CO2 cylinder requires that the cylinder be tested at what pressure?,[object Object]
5/3” the working pressure,[object Object]
How often should a cylinder be hydrostatically tested?,[object Object]
5 years,[object Object]
Winterized extinguishers can be identified by,[object Object]
¾” yellow dots on opposite sides,[object Object]
How is the multibreaker reset on a Walter Kidde unit?,[object Object]
Turn the switch to OFF then to ON,[object Object]
LRU-12,[object Object]
How often is the leakage test performed?,[object Object]
Every inspection cycle,[object Object]
How often is the functional test performed?,[object Object]
Every 4th inspection cycle,[object Object]
What ripcord pins are tacked?,[object Object]
First and last,[object Object]
If a suitable air source is not available, what may be subsituted?,[object Object]
Water pumped Nitrogen (BB-N-411),[object Object]
The leakage test can be performed on what 2 sections simultaneously?,[object Object]
Seat and Stern,[object Object]
During the leakage test, the bow, seat and stern are inflated to what pressures?,[object Object]
Bow=2.0Seat=1.0Stern= 2.0,[object Object]
What are the minimum pressures for the bow, seat and stern during the leakage test?,[object Object]
Bow= 1.6Seat= 0.6Stern= 1.6,[object Object]
A rounded patch should be how much larger than the damage?,[object Object]
1 ½” on all sides,[object Object]
What is used to clean the liferaft?,[object Object]
¼ to ½ oz of detergent: 1 gal of h20,[object Object]
What length of cord is required when replacing the mooring line?,[object Object]
16’,[object Object]
What is the minimum cure time for adhesive?,[object Object]
48 hours,[object Object]
The discharge port is torqued to what value?,[object Object]
60 +/- 5 in-lb,[object Object]
The calendar inspection shall not exceed how many days?,[object Object]
231,[object Object]
What is used to tack ripcord pins?,[object Object]
1 turn, size E, single,[object Object]
When the pull cable is properly installed what will be visible?,[object Object]
Green dot in the valve cover window,[object Object]
Rips, tears and holes exceeding what length render the LRU NRFI?,[object Object]
2”,[object Object]
How is the cleaning solvent applied?,[object Object]
Back and forth on the 1st and 3rd strokeone way on the 2nd and 4th,[object Object]
What is the finished length of the knotted righting line?,[object Object]
10’6” +/- 6”,[object Object]
Hydrostatic testing may be exceeded by how long?,[object Object]
2 years,[object Object]
The LRU-12 accommodates how many people?,[object Object]
4,[object Object]
How is the seat inflated?,[object Object]
Through the topping off valve using the hand pump,[object Object]
How long should cement be allowed to dry between coats?,[object Object]
10 minutes,[object Object]
The cement and accelerator mixture is only good for how long?,[object Object]
8 hours,[object Object]
How much force is applied between the cable ball and snaphook during the cable proof load test?,[object Object]
50 lbs,[object Object]
The liferaft is inflated to what pressure during the visual inspection?,[object Object]
1 psi,[object Object]
What is the first step when performing the visual inspection?,[object Object]
Remove the CO2 cylinder,[object Object]
During the functional test, the liferaft should inflate in what amount of time?,[object Object]
< 1 minute,[object Object]
The LRU-12 has how many; heaving lines, boarding handles and righting handles?,[object Object]
2 heaving3 boarding3 righting,[object Object]
What is done to the edges of patches larger than 5”?,[object Object]
scalloped,[object Object]
What is done if the hole in the floor is larger than 1”?,[object Object]
Patch both sides,[object Object]
How much overlap is required when repairing the seam?,[object Object]
1” minimum,[object Object]
What is the primary solvent used to clean the surface prior to patching?,[object Object]
toulene,[object Object]
The coupling nut is tightened to what torque value?,[object Object]
145 +/- 5 in-lb,[object Object]
The safety plug is tightened to what torque value?,[object Object]
29 ft-lb,[object Object]
What is the charge of the CO2 cylinder?,[object Object]
3.25 +/- .04lbs,[object Object]
What size safety wire is used on the inflation assembly?,[object Object]
.032”,[object Object]
The inflation valve is tightened to what torque value?,[object Object]
135 +/- 10 ft-lb,[object Object]
LRU-30, 31 AND 32,[object Object]
Are the LRU-30, 31, or 32 air droppable?,[object Object]
no,[object Object]
How often is the vendor repack/overhaul completed?,[object Object]
5 years,[object Object]
The LRU-30 holds how many people?,[object Object]
8,[object Object]
Frangible links are designed to break with how much force?,[object Object]
180 lbs,[object Object]
What is the inspection cycle?,[object Object]
448,[object Object]
The LRU-32 holds how many people?,[object Object]
20,[object Object]
The LRU-31 holds how many people?,[object Object]
12,[object Object]
LRU-13,[object Object]
The MROD may ice-up at what temperatures?,[object Object]
35 and below,[object Object]
Where is the LRU-13 stored in C-2 series aircraft?,[object Object]
Liferaft compartment,[object Object]
The selection of multi-place liferafts for transport aircraft is based on what criteria?,[object Object]
MissionAvailable space# of crew and passengers,[object Object]
If a survival item expires prior to next repack what is done?,[object Object]
Remains in service,[object Object]
CO2 cylinder markings shall be what color and size?,[object Object]
Black ¼”,[object Object]
The raft inlet manifold coupling nut is tightened to what torque?,[object Object]
140-150 in-lb,[object Object]
The inflation valve is threaded onto the cylinder and tightened to what torque?,[object Object]
165-175 ft-lb,[object Object]
The safety plug is tightened to what torque?,[object Object]
29 ft-lb,[object Object]
What is the CO2 cylinder charge?,[object Object]
4.64-4.76,[object Object]
The discharge port is tightened to what torque value?,[object Object]
60 +/-5 in-lb,[object Object]
LRU-13,[object Object]
The LRU-13 accommodates how many people?,[object Object]
7,[object Object]
How often is the special inspection performed?,[object Object]
30 days,[object Object]
What must be done to supply cylinders not equipped with a siphon tube?,[object Object]
Must be inverted,[object Object]
How do you determine if a cylinder is wire-wrapped?,[object Object]
“W” at the end of the part number,[object Object]
What ripcords are safety-tied?,[object Object]
First, middle, and last,[object Object]
LRU-14,[object Object]
The LRU-14 accommodates how many people?,[object Object]
12,[object Object]
All stitching must be done with what size thread and stitch range?,[object Object]
Size E, 8-10 spi,[object Object]
What do you inspect if CO2 is leaking from the valve discharge port?,[object Object]
Valve poppet for worn seat,[object Object]
What sections are inflated through the topping off valves after boarding?,[object Object]
Seat, floor, and upper tube,[object Object]
What part of the liferaft is inflated by the inflation assembly?,[object Object]
Main tube only,[object Object]
The inflation valve is threaded onto the cylinder and tightened to what torque?,[object Object]
165-175 ft-lb,[object Object]
The coupling nut on the raft inlet manifold is tightened to what torque?,[object Object]
140-150 in-lb,[object Object]
What is the CO2 cylinder charge?,[object Object]
4.74-4.86,[object Object]
LPU-21,[object Object]
How often is the calendar inspection performed?,[object Object]
90 days,[object Object]
What configurations are used in non-ejection seat aircraft?,[object Object]
LPU-21B/PLPU-21C/P,[object Object]
How much does the LPU-21 weigh?,[object Object]
4 lbs,[object Object]
During the beaded handle pull test, all snaps should release before how much force is applied?,[object Object]
25 lbs,[object Object]
The LPU-21 contains how many MK-124s and dye markers?,[object Object]
2,[object Object]
An LPU-21 modified by ACC 523 are re-designated to what?,[object Object]
LPU-27/P22P-7(V),[object Object]
How often is the special inspection performed?,[object Object]
30 days (aircraft installed),[object Object]
The webbing belt adjusts to fit what waist sizes?,[object Object]
30-44,[object Object]
LPU-21’s that are modified with a FLU-8 are re-designated to what?,[object Object]
LPU-23A/P,[object Object]
The cap nut on the valve stem is tightened to what torque?,[object Object]
8+/-1 in-lb,[object Object]
What weight and type of CO2 cylinder is used?,[object Object]
35g type III,[object Object]
An LPU-21D/P configured with the LPU-21C/P flotation assembly is designated as?,[object Object]
LPU-21C(V)1/P,[object Object]
During the packing the oral inflation valve shall be in what position?,[object Object]
Locked by the knurled ring,[object Object]
What may happen to the valve stem if the cap nut is over torqued?,[object Object]
May rotate,[object Object]
The overhand knot on the locking pin lanyard shall be within what distance of the eye of the pin?,[object Object]
¾”,[object Object]
What is the calendar inspection interval for preservers assigned to selected air reserve members?,[object Object]
180 days,[object Object]
What is the difference between an LPU-21D/P and an LPU-35?,[object Object]
The LPU-35 has an extension panel added,[object Object]
How long is the LPU-35 extension panel?,[object Object]
6”,[object Object]
LPU-23,[object Object]
The LPU-23 series is intended for what type of aircraft?,[object Object]
Ejection seat only,[object Object]
How often is the calendar inspection performed?,[object Object]
90 days,[object Object]
The FLU-8A/P is being replaced with what assembly?,[object Object]
FLU-8B/P,[object Object]
When will the silver indicator be visible in the firing check port?,[object Object]
When the inflator has been fired,[object Object]
The manganese dioxide batteries in the FLU-8 have what total life?,[object Object]
3 years from DOM,[object Object]
What does it mean when the bladder leaks from the fin seam?,[object Object]
The “V” tape has ruptured,[object Object]
LPU-31,[object Object]
The LPU-31 provides how much buoyancy?,[object Object]
29 lbs,[object Object]
Pressure exceeding how many psi may cause damage to the oral inflation valve?,[object Object]
10 psi,[object Object]
The LPU-31 is composed of what?,[object Object]
LPP-1/1A and a protective bladder cover,[object Object]
The LPU-31/P is used in what aircraft?,[object Object]
helicopters,[object Object]
The safety wire is twisted a minimum of how many times?,[object Object]
4,[object Object]
What diameter safety wire is used on the inflation assembly?,[object Object]
.0159”,[object Object]
The waist belt adjusts to what sizes?,[object Object]
30-52”,[object Object]
How often is the calendar inspection performed on the LPU-31?,[object Object]
90 days,[object Object]
LPU-36,[object Object]
When is the functional test performed?,[object Object]
Every 360 days or when the bladder is replaced,[object Object]
During the packing, how is the red inflation lanyard routed?,[object Object]
Under the inflator and between the zipper halves,[object Object]
During the functional test, the LPU-36 shall inflate in what amount of time?,[object Object]
< 30 seconds,[object Object]
When checking the battery voltage, the multi-meter should be in what mode?,[object Object]
Voltage measuring,[object Object]
How often is the special inspection peformed?,[object Object]
360 days,[object Object]
The LPU-36 weighs how many pounds?,[object Object]
3 1/4,[object Object]
The LPU-36 provides how much buoyancy?,[object Object]
65 lbs,[object Object]
What color is the zipper?,[object Object]
black,[object Object]
What is the primary means of inflation?,[object Object]
Beaded handles,[object Object]
The LPU-36 inflates automatically in what type of water?,[object Object]
Fresh or salt,[object Object]
The LPU-36 is equipped with what inflation assembly?,[object Object]
FLU-8,[object Object]
What batteries are used in the FLU-8 inflator?,[object Object]
FW14, 6-V, manganese dioxide,[object Object]
What is the total life of the FW14 batteries?,[object Object]
3 years from DOM,[object Object]
A negative reading during the battery voltage check indicates what?,[object Object]
Both batteries are backwardsmulti-meter leads are backwards,[object Object]
Where are the (+) and (-) probes placed during the battery voltage check?,[object Object]
(-) in the end port of the sensor plug(+) contact screw head near lever end of inflator,[object Object]
What is the stabilization time during the battery voltage check?,[object Object]
15 seconds,[object Object]
What does a reading of (0) indicate during the battery voltage check?,[object Object]
One battery is backwardsfaulty contactone/both are dischargedno batteries,[object Object]
What is done with batteries if a voltage of 0.1 dc or higher is obtained?,[object Object]
reject,[object Object]
The FLU-8 is disposed of IAW what regulation?,[object Object]
Federal Reg. 49, CFR 173.55,[object Object]
To what pressure are bladders inflated during the leakage test?,[object Object]
3.25 psig,[object Object]
After 1 hour the pressure in the bladder shall not be less than how many psig?,[object Object]
2.50,[object Object]
The sensor plug cap is tightened to what torque?,[object Object]
15 in-lb,[object Object]
Discard and replace CO2 cylinders that have a weight less than how many grams of its stamped weight?,[object Object]
2,[object Object]
How much force is applied to check the security of the beaded handle?,[object Object]
25 lbs,[object Object]
The cap nut on the FLU-8 is tightened to what torque?,[object Object]
15 to 16 in-lb,[object Object]
LPU-37,[object Object]
How often is the special inspection performed?,[object Object]
360 days,[object Object]
How much does the LPU-37 weigh?,[object Object]
3 ¼ lbs,[object Object]
What color is the LPU-37 zipper and why?,[object Object]
Same color as the exterior to distinguish it from the LPU-33,[object Object]
Who is the CFA for the LPU-37?,[object Object]
NAWCAD China Lake,[object Object]
What must be done prior to inflating the LPU-37 using the oral inflation tubes?,[object Object]
Exterior cover must be opened,[object Object]
The cap nut on the valve stem is tightened to what torque?,[object Object]
15 +/- 1 in-lb,[object Object]
PARACHUTES,[object Object]
After the firing pin is withdrawn how much force is exerted on the fail-safe assembly sleeve?,[object Object]
24-35 lbs,[object Object]
What the 5 sizes of Navy parachute canopies?,[object Object]
17, 24, 26, 28, 35,[object Object]
What happens to the pilot parachute at speeds between 90 and 250 knots?,[object Object]
Reduces in size to 24”,[object Object]
What size canopy does the NB-7 have?,[object Object]
28’,[object Object]
The model 7000 automatic opening device is available in what settings?,[object Object]
10,000’ and 14,000’,[object Object]
The spreader gun produces what diameter mouth at low and high speeds?,[object Object]
Low= 8’High= 4’,[object Object]
The APRR in an NES-12 fires at what altitude?,[object Object]
14,000 +/- 1,000,[object Object]
What function does the spreader gun fail-safe mechanism perform?,[object Object]
Ensures spreading of the canopy if the cartridge fails,[object Object]
What size canopy does the NB-6 have?,[object Object]
26’,[object Object]
At speeds from 0 to 90 knots, how does the pilot parachute inflate?,[object Object]
fully,[object Object]
How many different parachutes are used by the Navy?,[object Object]
13,[object Object]
MT-1XS/SL,[object Object]
Describe the Main Canopy,[object Object]
370 ft27-cell,[object Object]
Describe the reserve chute,[object Object]
270ft25-cell,[object Object]
What are the two types of application?,[object Object]
Free-fall and static line,[object Object]
What is the service life?,[object Object]
13 yrs from PIS15 yrs from DOM,[object Object]
When a parachute lacks a PIS date when will the total life expire?,[object Object]
13 yrs from DOM,[object Object]
A/P28S-32,[object Object]
What size is the canopy?,[object Object]
21’,[object Object]
Where are the Le-Moigne slots located?,[object Object]
180 degrees apart Gores 6 and 16,[object Object]
The intermediate altitude ejection sequence occurs at what altitudes?,[object Object]
8,000-18,000,[object Object]
How many variants of the A/P28s-32 parachute assemblies are there and what is the difference?,[object Object]
5; shape and size of the canopy breakers,[object Object]
The low speed/low altitude sequence occurs at what altitudes?,[object Object]
Below 8,000’,[object Object]
The A/P28S-32 is an integral part of what ejection seat escape system?,[object Object]
SJU-17,[object Object]
The canopy has how many gores?,[object Object]
20,[object Object]
Where is the withdrawal line connected when the assembly is installed on the seat?,[object Object]
Parachute deployment rocket motor,[object Object]
The torso harness integrates what items?,[object Object]
Parachute harness, lapbeltassy, shoulder restraint harness and torso vest,[object Object]
MC-6,[object Object]
What is the deployment bag made of?,[object Object]
8.2 oz cotton sateen,[object Object]
What is the finished length of the riser assembly?,[object Object]
30”,[object Object]
What are the two groups of suspension lines 1-20?,[object Object]
1-10 left11-20 right,[object Object]
The static line is capable of supporting how many pounds?,[object Object]
400,[object Object]
How much does the MC-6 weigh?,[object Object]
42 lbs,[object Object]
The MC-6 is limited to operations in winds of how many knots at surface?,[object Object]
13,[object Object]
What is the maximum opening time?,[object Object]
4 seconds,[object Object]
What is the repack cycle?,[object Object]
120 days,[object Object]
How many sections are in each gore?,[object Object]
4,[object Object]
What material are gores made of?,[object Object]
1.1 oz nylon,[object Object]
How many control lines?,[object Object]
2,[object Object]
What are control lines made of?,[object Object]
Type III nylon cord, Red,[object Object]
What is the rate of descent?,[object Object]
16 ft per second,[object Object]
How many vent lines?,[object Object]
14,[object Object]
How many suspension lines?,[object Object]
28,[object Object]
What is the reserve chute?,[object Object]
T-11R,[object Object]
What is the T-11R’s repack cycle?,[object Object]
365 days,[object Object]
The main static line is how long?,[object Object]
14’10” +/- 1”,[object Object]
How long are suspension lines?,[object Object]
21’,[object Object]
What is the maximum rate of descent of the T-11R?,[object Object]
26’ per second,[object Object]
What is the maximum deceleration?,[object Object]
8.2g,[object Object]
How many gores does the canopy have?,[object Object]
28,[object Object]
What is the tensile strength of the riser assembly?,[object Object]
5,500 lbs,[object Object]
What are the pack tray dimensions?,[object Object]
20x14x14,[object Object]
The T-11R has how many suspension lines and gores?,[object Object]
20,[object Object]
What is the canopy diameter?,[object Object]
32’,[object Object]
What is the maximum deployment speed?,[object Object]
150 KIAS,[object Object]
Pr stuff
What is the forward speed of the canopy?,[object Object]
10 knots,[object Object]
NES-12 PACKING,[object Object]
Initial movement of ripcord pins must occur with how much force?,[object Object]
27 lbs,[object Object]
How much force is required to remove the grip from the container?,[object Object]
15 +/- 5 lbs,[object Object]
The end of the fifth fold extends how far over the top edge of the container?,[object Object]
5 +/- 1”,[object Object]
The connector link screw is tightened to what torque?,[object Object]
20-25 in-lb,[object Object]
How much static line is left unstowed?,[object Object]
13 +/- 1/8”,[object Object]
The firing pin on the spreader gun requires how much force to release?,[object Object]
32 +/- 6 in-lb,[object Object]
Seat/man separation occurs how long after ejection initiation during intermediate altitude sequence?,[object Object]
3.10 seconds,[object Object]
What is the acceptable torque value of the knurled actuating lever?,[object Object]
28-50 in-oz,[object Object]
How many folds are made when stowing the canopy?,[object Object]
6,[object Object]
What is the finished width of the canopy before stowage?,[object Object]
20”,[object Object]
How can the distance between the last bight and the skirt hem be adjusted?,[object Object]
By increasing or decreasing the length between bights 8 and 9,[object Object]
The first suspension line bight is formed using what length of suspension line?,[object Object]
16”,[object Object]
What is the acceptable voltage of the PHSRU batteries?,[object Object]
+22.5,[object Object]
What is the total life of the electronics package assembly?,[object Object]
8 years,[object Object]
There shall be what length of suspension line between the last stow and the skirt hem?,[object Object]
14 +/- 1”,[object Object]
What is the allowable force to remove the end fitting from the arming cable housing?,[object Object]
17 +/- 3 lbs,[object Object]
What length of line shall be between bights?,[object Object]
14 ¾-15 ¼ ,[object Object]
Where is the firing lanyard positioned at the spreading gun?,[object Object]
Between lines 7 and 8,[object Object]
The aneroid leak detector is located on what side of the release assembly?,[object Object]
right,[object Object]
What is the total number of suspension line retaining bands?,[object Object]
16,[object Object]
Cartridges are torqued to what value?,[object Object]
84 +/- 12 in-lb,[object Object]
When the cartridge is properly installed where should the base be located?,[object Object]
Even with the top edge of the chamber,[object Object]
What is used to clean the spreader gun cartridge chamber and threads?,[object Object]
Denatured alcohol,[object Object]
If the spreader gun fails the first firing check what is done?,[object Object]
It must pass the next 2,[object Object]
How many spring opening eyes are located on the container?,[object Object]
12,[object Object]
What is the maximum play allowed in the plate of the yoke and plate assembly?,[object Object]
1/32”,[object Object]
The ripcord release must pass how many firing checks?,[object Object]
3,[object Object]
The arming pin is withdrawn at what altitude?,[object Object]
20,000’,[object Object]
Altitude is decreased at what rate?,[object Object]
175-200 ft per second,[object Object]
The chamber is evacuated to what minimum pressure altitude?,[object Object]
25,000’,[object Object]
The ripcord release firing check must simulate firing between what altitudes?,[object Object]
13,000 and 15,000,[object Object]
When is the cross-connector strap replaced?,[object Object]
When the canopy assembly is replaced,[object Object]
What is the total life of the spreading gun?,[object Object]
11 ½ years,[object Object]
What is the total life of the pilot parachute and riser assembly?,[object Object]
15 years,[object Object]
What is the total life of the external tri-stage pilot parachute?,[object Object]
13 years,[object Object]
What is the total life of the deployment bag?,[object Object]
15 years,[object Object]
What is the total life of the canopy assembly?,[object Object]
15 years,[object Object]
What is the service/total life of batteries?,[object Object]
4 years,[object Object]
What is done with parts received in new manufacture’s packaging that lack a DOM?,[object Object]
Use for 1 repack cycle,[object Object]
What is done when a component reaches service/total life limt?,[object Object]
Return to supply for disposition,[object Object]
What type of components can be replaced without repack?,[object Object]
External only,[object Object]
What is the maximum scheduled repack cycle?,[object Object]
1232 days,[object Object]
Cartridges are stored IAW what manual?,[object Object]
NA 11-100-1.1,[object Object]
If there is difficulty while removing a cartridge who is notified?,[object Object]
EOD,[object Object]
When is the firing pull force check performed?,[object Object]
Every repack,[object Object]
How are connector links positioned?,[object Object]
8-14 on top of 1-715-21 on top of 22-28,[object Object]
The spreading gun should be positioned so that what lines are facing up?,[object Object]
14 and 15,[object Object]
The packer is positioned on what side of the table?,[object Object]
left,[object Object]
NES-12 REPAIR,[object Object]
What is the required length of the spring opening assembly?,[object Object]
4 7/8+/- 1/8	,[object Object]
Loose screws on the parachute harness sensing release unit are torqued to what value?,[object Object]
11-13 in-lb,[object Object]
When can the survival kit be attached to the parachute assembly?,[object Object]
Before or after seat installation,[object Object]
Where are the static line arming cable ties made?,[object Object]
5 equally spaced points,[object Object]
What is the flute hem tacked to?,[object Object]
Inboard side of riser,[object Object]
What is used to tack the riser to the housing?,[object Object]
3 turns, size 6, doubled, waxed,[object Object]
How are all tackings tied off?,[object Object]
Surgeon’s, square, binder’sleave ½”,[object Object]
RSSK-3,[object Object]
The O2 bottle should be at what pressure for storage and shipment?,[object Object]
200= storage25= shipment,[object Object]
The relief valve shall unseat at what pressure?,[object Object]
120-140,[object Object]
What is the finished length of the actuating lanyard?,[object Object]
5”,[object Object]
During the functional test, after actuation the O2 system should indicate how much pressure?,[object Object]
45-80 psi,[object Object]
What are the 5 charging stations?,[object Object]
500-1000-1500-1800-2000,[object Object]
What is the approximate pressure when the gage needle is between the E and F of REFILL?,[object Object]
250 psi,[object Object]
What must all tacking cord be coated with?,[object Object]
Mixture of 50% parafin and 50% beeswax,[object Object]
The relief valve shall reset at what pressure?,[object Object]
110 ,[object Object]
How much force is required to unlock the release handle?,[object Object]
10-30 lbs,[object Object]
How much oxygen is supplied during a high altitude bailout?,[object Object]
10 minutes,[object Object]
How often is the RSSK-3 repacked?,[object Object]
448 days,[object Object]
What is housed in the lower container?,[object Object]
Life raft and survival items,[object Object]
How is the actuating lanyard tacked?,[object Object]
3 turns of waxed size E thread single,[object Object]
What is the size and capacity of the oxygen cylinder?,[object Object]
22 cu. In1800 psi,[object Object]
Survival items are secured to what length of cord?,[object Object]
140”,[object Object]
What is the length of the drop line?,[object Object]
26’4” +/- 12” old26’4” +/- 2” new,[object Object]
What is the torque value of the CO2 cylinder?,[object Object]
80-90 in-lb,[object Object]
The opening handle is mounted on what side?,[object Object]
Forward right side,[object Object]
The RSSK-3 is used in what aircraft?,[object Object]
T-2 series,[object Object]
What prevents emergency O2 from escaping overboard during ejection?,[object Object]
Check valve in oxygen port,[object Object]
What is the composite disconnect?,[object Object]
Joins O2 hoses, g-suit hose and electrical connections from the aircraft to the aircrewman,[object Object]
What are the functions of the RSSK-3?,[object Object]
Seat and container,[object Object]
The equipment container is secured to the drop line with that length of cord?,[object Object]
52 +/- 1”,[object Object]
How much drop line should be between Boot A and B during stowage?,[object Object]
7 +/- 1,[object Object]
RSSK-8,[object Object]
The phase/SDLM/PDM inspection cycle shall not exceed what amount of time?,[object Object]
308 days,[object Object]
How far should the handle travel before the latches unlock?,[object Object]
½ - 5/8 ,[object Object]
The emergency oxygen cylinder supplies how many minutes of oxygen?,[object Object]
10,[object Object]
The slider switch on the URT-33 should be in what position?,[object Object]
ON,[object Object]
What is the size and pressure of the oxygen cylinder?,[object Object]
53 cu in.1800 psi,[object Object]
The yellow handle used to open the RSSK-8 is located where?,[object Object]
Forward right side,[object Object]
During the functional test, the relief valve shall unseat at what pressure?,[object Object]
120-140,[object Object]
How much force is required to pull the handle free of engagement link?,[object Object]
10-30 lbs,[object Object]
The RSSK-8 is designed for use with what ejection seat?,[object Object]
Douglas ESCAPAC,[object Object]
The relief valve should reseat and be leak tight at what pressure?,[object Object]
110                                                                             ,[object Object]
O2  SYSTEMS,[object Object]
What instruction specifies minimum requirements for survival equipment?,[object Object]
OPNAVINST 3710.7,[object Object]
Who is the only authority for modification to life support equipment?,[object Object]
NAVAIRSYSCOM,[object Object]
Who is the FST for most life support equipment and survival items?,[object Object]
NAWCAD Pax River,[object Object]
Who is the FST for parachutes, torso harnesses and related hardware?,[object Object]
NAWCAD China Lake,[object Object]
Who has cognizance over radios and beacons?,[object Object]
NAWC Indianapolis,[object Object]
How many manuals are in the 13 series?,[object Object]
16,[object Object]
O2 COMPONENT CLEANING,[object Object]
The pH should be within what range?,[object Object]
6.5-8.0,[object Object]
What cleaning compound is used to clean the exterior of LOX converters?,[object Object]
MIL-C-81302,[object Object]
What is the temperature range of the ultrasonic cleaner?,[object Object]
32-212 F0-100 C,[object Object]
What color is the tank on/off switch?,[object Object]
red,[object Object]
What color is the generator on/off switch?,[object Object]
green,[object Object]
Ultrasonic tanks are filled how close to the top?,[object Object]
1-2”,[object Object]
What can be used to clean an area splashed by NOC?,[object Object]
One pound of citric acid w/ 1 gallon of waterWhite Vinegar,[object Object]
How much time does the cleaning process step require?,[object Object]
15 minutes,[object Object]
How long are components rinsed after cleaning?,[object Object]
5 minutes,[object Object]
How long should it take the distilled water to reach 150 F?,[object Object]
60 minutes,[object Object]
If NOC is good bubbles will dissipate in how much time?,[object Object]
Approximately 2 but no more than 5,[object Object]
What is used to clean oxygen lines?,[object Object]
Ivory dishwashing liquid and warm water,[object Object]
What is in each ultrasonic tank?,[object Object]
1- NOC and distilled water2- distilled water only,[object Object]
What is the solution mixture of NOC and distilled water?,[object Object]
50/50,[object Object]
What is support equipment used to clean oxygen components?,[object Object]
HT-1206 Ultrasonic Navy Oxygen Cleaning System,[object Object]
What is indicated when the pH is above 8.0?,[object Object]
Distilled water has been contaminated by NOC,[object Object]
What is the capacity of the ultrasonic cleaner tanks?,[object Object]
1.9 gallons,[object Object]
CRU-82,[object Object]
How often is the CRU-82 subjected to a special inspection?,[object Object]
30 days,[object Object]
When ascending in altitude how much output flow should be maintained?,[object Object]
3.0 inH20,[object Object]
What will happen if the inlet pressure falls below 10 psi?,[object Object]
PRESS/MANOMETER will overload,[object Object]
What loads the diaphragm lever to produce positive safety pressure at the regulator outlet?,[object Object]
Safety pressure spring,[object Object]
The pressure breathing feature maintains how much pressure in the mask?,[object Object]
20.0 in H20 at altitudes between 34-50,000,[object Object]
The safety pressure feature maintains how much positive pressure in the mask?,[object Object]
.40-2.5 inH2O,[object Object]
The CRU-82 shall never be used above what altitude?,[object Object]
50,000,[object Object]
Chest mounted regulators are designed to be used with what series of oxygen mask?,[object Object]
MBU-14,[object Object]
What causes the pressure breathing aneroid to expand at higher altitudes?,[object Object]
Decrease in ambient pressure,[object Object]
How often is the CRU-82 subject to a calendar inspection?,[object Object]
90 days,[object Object]
What it the flow rate of a CRU-82?,[object Object]
0-100 lpm,[object Object]
The safety-pressure works at what altitudes?,[object Object]
Up to and including 34,000,[object Object]
To purge the CRU-82 how much pressure is applied and for how long?,[object Object]
90 psi for 1-3 minutes,[object Object]
What is the recommended inlet pressure of a CRU-82?,[object Object]
5-120 psi,[object Object]
Oxygen enriched air entering the regulator is controlled by what?,[object Object]
Balanced main valve,[object Object]
How much does a CRU-82 weigh?,[object Object]
9.5 oz,[object Object]
What is the operating altitude range of a CRU-82?,[object Object]
0-50,000,[object Object]
What is the operating temperature range of a CRU-82?,[object Object]
-65 to 160 f,[object Object]
Chest mounted regulators can routinely be used up to what altitude?,[object Object]
43,000,[object Object]
How much pressure must be maintained on the N2 input pressure gage to eliminate suction on press/suction manom  (4)?,[object Object]
At least 90 psig,[object Object]
What shall be used to grip the center stem?,[object Object]
tweezers,[object Object]
The openings of the six external rings must be placed how many degrees apart?,[object Object]
180,[object Object]
PANEL MOUNT REGULATORS,[object Object]
When should silicone parts be replaced?,[object Object]
Whenever the regulator is disassembled for repair,[object Object]
What is the emergency lever used for?,[object Object]
Emergencies and ground test,[object Object]
At what altitude is the flow suction test performed?,[object Object]
Sea level,[object Object]
During the oxygen ratio test, what are actual flows converted to?,[object Object]
Indicated flows,[object Object]
How is the average oxygen found during the oxygen ratio test?,[object Object]
Add minimum and maximum O2 and divide by 2,[object Object]
How is the actual low air computed?,[object Object]
Subtract max O2 percentage from 100% and multiply by the corresponding actual output,[object Object]
What type of nitrogen shall be used in testing oxygen regulators?,[object Object]
Type I, Class I, Grade B (A-A-59503),[object Object]
What is the pressure range for nitrogen cylinders used in testing oxygen components?,[object Object]
500-1800 psig,[object Object]
What percentage of oxygen is delivered when the lever is in the EMERGENCY position?,[object Object]
100%,[object Object]
When is the emergency position used?,[object Object]
When inadequate oxygen supply is suspected,[object Object]
At what altitude is normal breathing?,[object Object]
Up to 30,000,[object Object]
In the emergency position how much positive pressure is provided to the regulator outlet?,[object Object]
2-4 inH2O,[object Object]
In test mask position how much positive pressure is provided to the regulator outlet?,[object Object]
6-16 inH2O,[object Object]
The first stage relief valve assembly is set to relieve at what pressure?,[object Object]
55-60 psi,[object Object]
The first stage reduction chamber reduces supply oxygen to what pressure?,[object Object]
32-35 psi,[object Object]
What provides automatic safety pressure and pressure breathing at altitudes above 30,000 feet?,[object Object]
Pneumatic actuation of the aneroid assembly beginning at 27,000,[object Object]
The second stage relief valve assembly provides additional safety and vents at what rate?,[object Object]
45 lpm @ 40.7 inH2O,[object Object]
How is regulator oxygen purge performed?,[object Object]
Apply 50 psi of ABO for 1-3 minutes,[object Object]
During the emergency pressure test with 0 flow, outlet pressure shall not exceed how many inH2O in the test mask position?,[object Object]
17.5,[object Object]
During the emergency pressure test with the emergency pressure lever in the emergency position, outlet pressure shall not exceed what inH2O?,[object Object]
5.5,[object Object]
How is the actual high air computed?,[object Object]
Pr stuff
Subtract minimum O2 % from 100% and multiply by corresponding actual output,[object Object]
What are the 3 lever positions?,[object Object]
NormalEmergencyTest Mask,[object Object]
At what altitude does pressure breathing start?,[object Object]
30,000 ft,[object Object]
An air-oxygen mixture is delivered up to what altitude?,[object Object]
Up to 32,000 ft,[object Object]
At what altitude is 100% oxygen delivered?,[object Object]
At 32,000 ft,[object Object]
What are the 2 visual indicators?,[object Object]
Pressure gageFlow indicator ,[object Object]
What does the diluter lever do?,[object Object]
Selects normal or 100% oxygen,[object Object]
What does the supply lever do?,[object Object]
Opens/closes oxygen supply,[object Object]
Regulators are supplied in what two basic configurations?,[object Object]
Low pressure 50-500 psigHigh pressure 50-2000 psig,[object Object]
GCU-24/A LOX CONVERTER,[object Object]
A converter will explode at what pressure?,[object Object]
1200 psi,[object Object]
If left unchecked pressure can build to how many psi?,[object Object]
12,000,[object Object]
What is the operating pressure of the GCU-24/A?,[object Object]
55-90,[object Object]
What is the maximum build up time?,[object Object]
5 minutes,[object Object]
The opening and closing of the pressure closing valve keeps pressure at approximately how many psi?,[object Object]
75,[object Object]
What is the filling pressure?,[object Object]
30 psig,[object Object]
What is the maximum amount of leakage with 95 psig applied?,[object Object]
.01 lpm,[object Object]
To prevent moisture from entering during shipment/storage the converter is filled with what at what pressure?,[object Object]
Gaseous O2 @ 25-30 psig,[object Object]
What is the operating temperature range?,[object Object]
-65 to 260,[object Object]
What is the relief valve setting?,[object Object]
100-120 psig,[object Object]
What is the filling time at 70 F?,[object Object]
10 minutes,[object Object]
During the evaporation loss test, weight loss shall not exceed how many pounds?(BUILD UP AND SUPPLY ),[object Object]
3 lbs in 24 hours,[object Object]
The weight of LOX must be converted to what during the capitance full test?,[object Object]
decimal,[object Object]
How often is the relief valve forwarded to I-level for testing?,[object Object]
Every 6 months,[object Object]
The time required to build up a working pressure of 55-90 shall not exceed how many minutes?,[object Object]
5 minutes,[object Object]
Time between bench tests shall not exceed how many days?,[object Object]
231,[object Object]
During the insulation resistance test, what is the minimum readings between A to B, A to ground and B to ground?,[object Object]
A to B=2.0 mega ohmsA/B to ground+ 1.0 mega ohms,[object Object]
What is the delivery rate?,[object Object]
120 lpm,[object Object]
What company manufactures the GCU-24?,[object Object]
Essex Industries,[object Object]
What company manufactures the GCU-29?,[object Object]
Litton Life Support,[object Object]
What is the LOX capacity of the GCU-24?,[object Object]
10 liters,[object Object]
During the evaporation loss test, weight loss shall not exceed how many pounds?(VENTED MODE),[object Object]
5 lbs in 24 hours,[object Object]
When a pressure of 100-120 psig is applied the relief valve shall vent how much?,[object Object]
100 lpm,[object Object]
A relief valve installed in the aircraft is set to relieve at what pressure?,[object Object]
115,[object Object]
During the fill, buildup and vent valve leakage test, leakage shall not exceed how many lpm in 2 minutes?(70 psig),[object Object]
.02 lpm,[object Object]
An acceptable reading during the capacitance test is?,[object Object]
121.5-125.5,[object Object]
What is the pressure closing valve setting?,[object Object]
55-90,[object Object]
OXYGEN EQUIPMENT,[object Object]
How are tools used for oxygen use marked?,[object Object]
“For Oxygen Use Only”,[object Object]
What is done to a LOX converter that is emptied?,[object Object]
Must be purged,[object Object]
Oxygen must be stored what distance from combustible materials?,[object Object]
At least 50’,[object Object]
What is used to purge filler and distribution lines and how is it applied?,[object Object]
Heated oil free N2 120 psig for 30 minutes,[object Object]
The bottom converter storage shelf must be how high off the ground?,[object Object]
At least 10”,[object Object]
Oxygen facilities must be able to maintain what temperature range?,[object Object]
65-75 F,[object Object]
What must be done to all cylinders that fall below 15 psig?,[object Object]
Remove from service for vacuum and heat drying/hot nitrogen gas drying,[object Object]
Oxygen is how much denser than air?,[object Object]
10%,[object Object]
Where must transformer banks be placed?,[object Object]
Minimum 50’ from transfer shop and LOX storage tank areas,[object Object]
Converter storage shelves must be how high and what depth?,[object Object]
No less than 17” high18” deep,[object Object]
How long must clothing splashed with LOX be aired out?,[object Object]
At least 1 hour,[object Object]
How many converters can be drained at one time?,[object Object]
Maximum of 2,[object Object]
Continuous flow regulators are authorized for use by whom?,[object Object]
passengers,[object Object]
How many inches are left for each converter?,[object Object]
18,[object Object]
Automatic positive pressure diluter demand regulators shall not be used above what altitude?,[object Object]
43,000 ft,[object Object]
How are ABO cylinders marked?,[object Object]
Green cylinder w/ 3” white band“OXYGEN, AVIATOR’S” in 1 ¾”- 2” white letters,[object Object]
Pressure in oxygen storage cylinders shall not fall below what pressure?,[object Object]
50 psig,[object Object]
O2 shops aboard ships that support OBOGS must be capable of how many air changes?,[object Object]
2.0 per hour,[object Object]
LOX systems are used on what aircraft?,[object Object]
Ones which space, weight and mission considerations are paramount,[object Object]
What determines oxygen-to-air ration?,[object Object]
altitude,[object Object]
What is the expansion ration of LOX?,[object Object]
862 to 1,[object Object]
Only oxygen conforming to what standard shall be used in aircraft gaseous oxygen systems?,[object Object]
MIL-PRF-27210,[object Object]
What is the temperature of LOX?,[object Object]
-297 f,[object Object]
In an O2 shop, mechanical exhaust must provide a minimum of how many air changes per hour?,[object Object]
3,[object Object]
What is the minimum and maximum torque for5/16” 3/8” ½” tubing?,[object Object]
5/16= 100-1253/8= 200-250½= 300-400,[object Object]
How high must drip pan sides be?,[object Object]
6”,[object Object]
What is the maximum service ceiling of regulators?,[object Object]
50,000 ft,[object Object]
How are nitrogen cylinders marked?,[object Object]
Gray cylinder, 2 3” black bands“NITROGEN, OIL FREE” in white,[object Object]
What manual contains instructions for storage, handling and hydrostatic testing?,[object Object]
NAVAIR 06-20-2,[object Object]
To what standard must LOX conform?,[object Object]
MIL-PRF-27210 TYPE II,[object Object]
What are the 3 categories of aircraft oxygen systems?,[object Object]
Low pressure 0-500High pressure 0-1800Reduced HPLOX,[object Object]
What are the characteristics of trichlorotriflouroethane vapor?,[object Object]
ColorlessOdorlessTasteless,[object Object]
FLOWMETER,[object Object]
The flowmeter is cleaned for oxygen service IAW what manual?,[object Object]
06-30-501,[object Object]
The seal spindle is loosened using what and how?,[object Object]
5/32” hex wrench2 turns counter-clockwise,[object Object]
What liquid detergent is used to clean the tube?,[object Object]
MIL-D-16791,[object Object]
What is applied to O-rings during reassembly?,[object Object]
Lubricant, MIL-G-27617, type III,[object Object]
The flowmeter is calibrated at what interval?,[object Object]
6 months,[object Object]
What is the scale range of the overboard leakage rotameter?,[object Object]
20-240 ccm,[object Object]
What is the scale range of the low range leakage rotameter?,[object Object]
20-240 ccm,[object Object]
What is the scale range of the high range leakage rotameter?,[object Object]
200-2300 ccm,[object Object]
What are meter end fittings made of?,[object Object]
Chromium plated brass,[object Object]
SURVIVAL ITEMS,[object Object]
If Quik-clot will expire before next repack what is done?,[object Object]
Remove and replace,[object Object]
What is the service/shelf life of bagged water?,[object Object]
5 years,[object Object]
If water purification tablets will expire prior to next repack, what is done?,[object Object]
Remain in service,[object Object]
The overall finished length of the double shroud cutter shall not exceed what length?,[object Object]
6 7/8”,[object Object]
The lensatic compass has an approximate luminous life of how long?,[object Object]
10 years,[object Object]
What is the expiration date of water purification tablets?,[object Object]
3 years from DOM3 years from PIS if no DOM1 year from date opened,[object Object]
What is the capacity of the canteen?,[object Object]
12 oz,[object Object]
The double bladed shroud line cutter can not be used with what assemblies?,[object Object]
HBU-11, HBU-23, TRI-SAR,[object Object]
The standard wool blanket has what dimensions?,[object Object]
6’ x 8’,[object Object]
If bagged water lacks a DOM, when will it expire?,[object Object]
15 months from date PIS,[object Object]
The wrist compass can be used to locate what?,[object Object]
lodestone,[object Object]
How long does it take to exhaust a sea dye marker?,[object Object]
20-30 minutes,[object Object]
What is used to sharpen the knife?,[object Object]
whetstone,[object Object]
What is the most valuable general purpose survival tool?,[object Object]
Survival knife,[object Object]
What is the green zone of a HABD?,[object Object]
2700-3000,[object Object]
What is the primary uses for the wrist compass?,[object Object]
NavigationVectoring aircraft,[object Object]
How long is the hook blade knife?,[object Object]
6”,[object Object]
How are flare lots reclassified?,[object Object]
Naval Ammunition Reclassification messages(NAR),[object Object]
Each end of a MK-124 lasts for how long?,[object Object]
20 seconds,[object Object]
What are the two parts of a SRU-31?,[object Object]
Packet 1= medicalPacket 2= general,[object Object]
What does a MK-189 personnel distress signal kit consist of?,[object Object]
2 MK-796 MK-124,[object Object]
What is the capacity of the emergency drinking water supply bottle?,[object Object]
4 oz,[object Object]
Theater specific survival kits are used at whose discretion?,[object Object]
TYCOM,[object Object]
How can the MK-4 signal mirror be used to start a fire?,[object Object]
Plastic edges can be shaved and used as tinder,[object Object]
How long is the pocket chainsaw?,[object Object]
30”,[object Object]
What is the purpose of rations?,[object Object]
Provide quick energy,[object Object]
Cartridges in a MK-79 are propelled upward how high?,[object Object]
250-650’,[object Object]
The sea dye marker can be seen how far away at 3,000’?,[object Object]
10 miles,[object Object]
The sea dye marker ceases to be a good target after how long?,[object Object]
1 hour,[object Object]
With an MROD, how much bagged water is supplied in a liferaft?,[object Object]
4 oz per person,[object Object]
What are the two ends of a MK-124?,[object Object]
Day- Orange smokeNight- Red flare,[object Object]
Where is the personnel lowering device normally stowed?,[object Object]
In the RSSK,[object Object]
The type I casualty blanket is what size?,[object Object]
84 x 56,[object Object]
How is the sharpness of the hook blade knife tested?,[object Object]
2 cuts through type III cord,[object Object]
Where is the lanyard attachment hole located on the emergency signaling mirror?,[object Object]
In the center,[object Object]
Each cartridge of a MK-79 has what duration?,[object Object]
4 ½ seconds,[object Object]
When are flares that are reclassified removed and replaced?,[object Object]
When directed by an ACB,[object Object]
Where is the lanyard attachment located on the MK-4 signaling mirror?,[object Object]
In the corner,[object Object]
The MK-124 is held at arms length at what angle to the horizontal?,[object Object]
45 degrees,[object Object]
What is the purpose of the manual reverse osmosis desalinator?,[object Object]
Converts seawater or brackish water into potable water,[object Object]
How many mechanical patches are packed in the droppable accessory container of a LRU-15?,[object Object]
2,[object Object]
The hook blade knife should be sharpened to what?,[object Object]
A razor’s edge,[object Object]
The water storage bag is capable of holding how much water?,[object Object]
5 quarts,[object Object]
What is the breaking strength of Type I nylon cord?,[object Object]
100 lbs,[object Object]
What comprises the pocket knife?,[object Object]
Blade, can opener, bottle opener, screwdriver and leather punch,[object Object]
What is the purpose of a mechanical patch?,[object Object]
Seal a hole in a LRU-15,[object Object]
How often is the MROD sent to the manufacturer for rework and overhaul?,[object Object]
Every 4 and 8 years,[object Object]
What is the ration rate of replacement?,[object Object]
24oo kCal per 3 people,[object Object]
The back of the blade should be at what angle to the whetstone when sharpening?,[object Object]
20 degrees,[object Object]
Datrex product has what shelf life?,[object Object]
5 years from DOM,[object Object]
What does a lensatic compass contain to provide self-illumination?,[object Object]
Tritium in glass vials,[object Object]
The leatherman wave survival tool is what length when closed and open?,[object Object]
4” closed6 ¼” open,[object Object]
The MROD is capable of delivering how much fresh water?,[object Object]
1.4 gal an hour,[object Object]
What are the dimensions of a MK-124?,[object Object]
5” long1 ½” diameter,[object Object]
What is done if an MROD is due for rework or overhaul prior to repack?,[object Object]
Remain in service,[object Object]
The type II lightweight casualty blanket is what size?,[object Object]
96 x 56,[object Object]
What is the climate capacity of a lensatic compass?,[object Object]
-50 to 150,[object Object]
What is the shelf life of Quik-clot?,[object Object]
3 years,[object Object]
COLD WEATHER SURVIVAL KITS,[object Object]
How long is the survival saw cutting blade?,[object Object]
15”,[object Object]
What is the maximum usage time of chemical heat packs?,[object Object]
7 hours,[object Object]
What are the dimensions of the survival saw when in its closed configuration?,[object Object]
17 x 1.5 x 0.5,[object Object]
The cold weather survival kit is intended for use in areas where the average temp does not exceed?,[object Object]
50 f,[object Object]
What is the average burn time of lifeboat matches?,[object Object]
12 seconds,[object Object]
What is the tensile strength of duct tape?,[object Object]
25 lbs per sq in,[object Object]
What is the inside circumference of the ultimathule sleeping bag?,[object Object]
67”-68”,[object Object]
The SRU-A/P99S-2 is intended for use by how many aircrewmen?,[object Object]
12,[object Object]
How long are ice screws?,[object Object]
7”,[object Object]
What is the shaft length range of the telescoping shovel?,[object Object]
14-22”,[object Object]
What are ice screws made of?,[object Object]
Titanium alloy,[object Object]
The self-inflating ground insulator has what dimensions?,[object Object]
20 x 47 x 1,[object Object]
The ultimathule sleeping bag can be vacuum packed to what volume?,[object Object]
450 cu in,[object Object]
What is the maximum and average temp of chemical heat packs?,[object Object]
135 average156 max,[object Object]
The ultimathule sleeping bag fits heights up to how many feet?,[object Object]
6’6”,[object Object]
What is the load capacity of the plastic bag?,[object Object]
75 lbs,[object Object]
The lightweight extreme weather shelter can be used in temps below what?,[object Object]
-50,[object Object]
The ultimathule sleeping bag is recommended for use when temps are below how many degrees?,[object Object]
32,[object Object]
The lightweight extreme weather shelter can withstand what snow load?,[object Object]
4 lbs per sq ft,[object Object]
The lightweight extreme weather shelter provides protection for how many people?,[object Object]
Minimum of 3,[object Object]
The lightweight extreme weather shelter can withstand what amount of wind with minimal damage?,[object Object]
Over 73 mph,[object Object]
The vial contains how many matches and cotton fibers?,[object Object]
25,[object Object]
The survival kit provides additional protection for how long?,[object Object]
72 hours,[object Object]
How often is a special inspection performed?,[object Object]
360 days,[object Object]
What is the tensile strength of rubber tubing?,[object Object]
3500 lbs per sq in,[object Object]
How much does the ultimathule sleeping bag weigh?,[object Object]
6 lbs,[object Object]
What are the dimensions of the lightweight extreme weather shelter?,[object Object]
Area= 52 sq ftcenter- 48”, wall= 37”Packed= 24” x 9”,[object Object]
The SRU-A/P99S-1 is intended to be used by how many aircrew members?,[object Object]
4,[object Object]
LIGHTS,[object Object]
The SDU-39 incorporates what filter lenses?,[object Object]
Infrared and Blue,[object Object]
You should acclimate your eyes for how long before performing the IR lens test?,[object Object]
5 minutes,[object Object]
What are flash requirements for the SDU-39 during testing?,[object Object]
50 +/- 10 per min for 2 minutes,[object Object]
What is the operational life of the survivor locator light?,[object Object]
8 continuous hours,[object Object]
The right angle flashlight includes how many filters?,[object Object]
5; 1 diffused, 1 blue, 2 red, 1 blackout,[object Object]
What color is the ACR/FA-11 crew light?,[object Object]
orange,[object Object]
What color is theACR/FA-11 (M) crew light?,[object Object]
Olive Green,[object Object]
The sidewinder LED lights provide what 4 levels of output?,[object Object]
Low, medium, medium high and high,[object Object]
When the raised indicator knob of the sidewinder is in the top position the light is in what mode?,[object Object]
Infrared,[object Object]
The sidewinder has what color LED bulbs?,[object Object]
Green, Blue, IR and White,[object Object]
The voltage reading of batteries installed in the sidewinder must be at least how many volts?,[object Object]
1.5 or greater,[object Object]
FLIGHT CLOTHING,[object Object]
The GS/FRP-2 are cleaned with water up to what temp?,[object Object]
120 degrees,[object Object]
What are CWU-64/P?,[object Object]
Cold weather flyer’s coveralls,[object Object]
The CWU-36 can be washed in water up to what temp?,[object Object]
140 degrees,[object Object]
The CWU-36 can be dried at what maximum temp?,[object Object]
180 degrees,[object Object]
What are the CWU-18/p?,[object Object]
Extreme cold weather trousers,[object Object]
The G-1 is managed IAW what instruction?,[object Object]
OPNAVINST 10126.4A,[object Object]
The flyer’s boot is available in what sizes?,[object Object]
3-14,[object Object]
The aircrew safety boot is available in what sizes?,[object Object]
3N – 14 ½ XW,[object Object]
The GS/FRP-2 are available in what sizes?,[object Object]
4-12,[object Object]
What are the CWU-43 and 44/p?,[object Object]
Cold weather underwear,[object Object]
The CWU-23 liner is available in how many sizes?,[object Object]
12,[object Object]
The CWU-72 is available in how many sizes?,[object Object]
9,[object Object]
The multi-climate protection system consists of how many pieces?,[object Object]
13,[object Object]
The MCPS can be mixed and matched to form how many levels?,[object Object]
6,[object Object]
How many square inches of patches may be worn on flight clothing?,[object Object]
50,[object Object]
What is the largest size patch that can be worn on flight clothing?,[object Object]
4” in any direction,[object Object]
The coveralls are supplied in what sizes?,[object Object]
32S – 52L,[object Object]
What is the CWU-36/p?,[object Object]
Summer flyer’s jacket,[object Object]
The CWU-36/P provides protection in what temperature zones?,[object Object]
50 and above,[object Object]
What is the CWU-45/P?,[object Object]
Cold weather flyer’s jacket,[object Object]
ROTARY WING HELMETS,[object Object]
Where is the strobe light securing patch positioned?,[object Object]
¼” to the right and 1” aft of the lens pad,[object Object]
What damage renders the laser visor unusable?,[object Object]
Scratch exceeding 1/3 the visor thickness,[object Object]
What are the 4 thicknesses of zetaliners?,[object Object]
¼, 3/8, 1/2 , 5/8,[object Object]
How do you determine the size and thickness of a zetaliner?,[object Object]
Last 3 digits of the part number,[object Object]
What support equipment is used to test communications?,[object Object]
TTU-489,[object Object]
Communications are tested with the TTU-489 IAW what manual?,[object Object]
NAVAIR 17-15BC-22,[object Object]
What are the authorized visor assemblies?,[object Object]
Clear, neutral, gradient, amber and LEP,[object Object]
The thermoplastic liner consists of how many layers?,[object Object]
5,[object Object]
What are the minimum and maximum number of TPL layers?,[object Object]
2 minimum5 maximum,[object Object]
What is used when inserting the energy absorbing liner into the helmet shell?,[object Object]
36” Type VI webbing,[object Object]
Zetaliners are available in how many sizes and thicknesses?,[object Object]
4/4,[object Object]
The HGU-84 is available in what 4 sizes?,[object Object]
M, L, XL, XL-W,[object Object]
The helmet provides what protection to the aircrew member?,[object Object]
Eye, ear, head,[object Object]
The helmet is taped IAW with what instruction?,[object Object]
OPNAVINST 3710.7,[object Object]
What size pile fastener is used to secure the strobe light?,[object Object]
2 x 2,[object Object]
FIXED WING HELMETS,[object Object]
Bladders subjected to what pressures must be removed from service?,[object Object]
2.5 or greater,[object Object]
What is the maximum allowed leakage in 30 seconds?,[object Object]
.1 psig,[object Object]
The bladder leak test is performed using what equipment and IAW what manual?,[object Object]
TTU-551NAVAIR 17-15GB-505,[object Object]
How often is the HGU-89 bladder leak tested?,[object Object]
360 days,[object Object]
What 2 stitches can be used to repair the edgeroll?,[object Object]
Whip and baseball,[object Object]
Unrepairable holes in the edgeroll larger than how many inches render the helmet unusable?,[object Object]
3”,[object Object]
The boom swivel is located on what side of the helmet?,[object Object]
Left hand,[object Object]
The bladder kit assembly is available in how many sizes?,[object Object]
1,[object Object]
When is the amber lens used?,[object Object]
Hazy/overcast during day,[object Object]
The HGU-68 is available in what 3 sizes?,[object Object]
M, L, XL,[object Object]
What 5 series of helmets are used for fixed wing aircraft?,[object Object]
HGU-66, 68, 85, 87, 89,[object Object]
MBU-12 SERIES,[object Object]
How often is the mask subjected to a special inspection?,[object Object]
30 days,[object Object]
What is the preferred cleaning solution for the MBU-12 series oxygen mask?,[object Object]
1% by weight solution of cleaning compound¼- ½ oz : 1 gal of water,[object Object]
The MBU-17(V)5/P is designed for use in what aircraft?,[object Object]
E-2C,[object Object]
The mask is qualified for water depths up to how many feet?,[object Object]
16,[object Object]
The MBU-17(V)3/P is designed for use in what aircraft?,[object Object]
C-2A,[object Object]
The MBU-16 is used in what aircraft?,[object Object]
AV-8, EA-6B, F/A-18,[object Object]
The MBU-15 is used in what aircraft?,[object Object]
S-3,[object Object]
What test set is used to perform the functional test?,[object Object]
TTU-489,[object Object]
To ensure maximum downward vision, where should the mask be positioned?,[object Object]
One finger width below the nose bridge,[object Object]
There should be no more than how many inches of extension in the oxygen delivery hose?,[object Object]
1”,[object Object]
What distance is measured when selecting the correct O2 mask size?,[object Object]
Bridge of the nose to just underneath the chin bone,[object Object]
The MBU-17(V)8/P is designed for use in what aircraft?,[object Object]
MV-22,[object Object]
What does the alternative cleaning solution consist of?,[object Object]
4 tablespoons of powder detergent : 1 gal of water,[object Object]
The bayonet receiver shall be no closer than what distance from the edge of the helmet?,[object Object]
½”,[object Object]
What is used to disinfect the oxygen mask?,[object Object]
1/3 cup of bleach : 1 gal of water,[object Object]
The MBU-17(V)6/P is designed for use in what aircraft?,[object Object]
F-5,[object Object]
What is used to clean the inhalation/exhalation valve?,[object Object]
70% solution of isopropyl alchohol,[object Object]
The MBU-12 series oxygen mask is available in how many sizes?,[object Object]
4,[object Object]
What is the cure time of silicone?,[object Object]
24 hours,[object Object]
Where can the year and quarter of manufacture be found?,[object Object]
Inside the left cheek flap,[object Object]
The bayonet receiver is inserted to what position during fitting?,[object Object]
Second locking,[object Object]
MBU-23 SERIES,[object Object]
The MBU-23 is designed as an alternative to what masks?,[object Object]
MBU-12 and MBU-5,[object Object]
What measurement is used to determine mask size?,[object Object]
Distance between nasal root and supermentale,[object Object]
During fitting the bayonet receivers are inserted to what position?,[object Object]
Second clicking,[object Object]
How often is the special inspection performed?,[object Object]
30 days,[object Object]
What was the MBU-23 series oxygen mask developed for?,[object Object]
Non-positive pressure breathing for g applications,[object Object]
The MBU-24/P22P-16 oxygen mask is designed for use with what helmets?,[object Object]
HGU-87 AND 89,[object Object]
AIRSAVE VEST,[object Object]
The TACAIR vest has how many general pockets?,[object Object]
4,[object Object]
The CMU-36’s metal slide fastener can withstand how much force during ejection?,[object Object]
600 KIAS,[object Object]
What are the two configurations of the Airsave vest?,[object Object]
CMU-33 and CMU-36,[object Object]
The vest accommodates what torso sizes?,[object Object]
5% female to the 95% male,[object Object]
In what 3 areas can the vest be adjusted for fitting?,[object Object]
Back center and under each arm,[object Object]
Tears in the raschel mesh fabric exceeding how many inches may not be repaired?,[object Object]
4,[object Object]
The vest accommodates what chest sizes?,[object Object]
32-57,[object Object]
The vest can be expanded to accommodate what maximum chest size?,[object Object]
67”,[object Object]
The Airsave is compatible with what life preservers?,[object Object]
LPU-21, 23, 34, 36, 37,[object Object]
CBR Respirators,[object Object]
Who performs the preflight?,[object Object]
PR,[object Object]
When are lithium batteries used?,[object Object]
War ,[object Object]
The NiCad battery provides how many hours of operation?,[object Object]
3 ½ - 4,[object Object]
The lithium battery provides how many hours of operation?,[object Object]
10+,[object Object]
The hood outlet valves should be in what position during normal flight operation?,[object Object]
open,[object Object]
What are the 4 positions of the ICU?,[object Object]
Aligned= off, 1st= listen only, 2nd= talk/listen (acoustic), 3rd= talk/listen (hardwire),[object Object]
What are the methods of preventing suffocation?,[object Object]
Faceplate ripaway, anti-suffocation disconnect,[object Object]
What is used to clean the orinasal mask?,[object Object]
1 tablespoon bleach : 2 quarts of water,[object Object]
During the functional test, the H-manifold should be in what position?,[object Object]
Open (horizontal),[object Object]
How often is the special inspection performed?(Training and operational),[object Object]
training- 90 daysoperational- 270 days,[object Object]
The bench test is performed using what test set?,[object Object]
A/E47T-28,[object Object]
During the pressure test, what is the minimum manometer reading?,[object Object]
2.6 inH2O,[object Object]
What is used to clean exhalation valves?,[object Object]
Isopropyl alcohol,[object Object]
The canisters do not provide protection from what agents?,[object Object]
Ammonia gasCarbon monoxide,[object Object]
The canister provide protection from sulfur dioxide for how long?,[object Object]
5-10 minutes,[object Object]
Hare training respirators marked?,[object Object]
“TRAINING DEVICE” 1” letters on the front of the apron in yellow,[object Object]
Who do you contact for custom fit sizes? (XL, XS, XXS),[object Object]
NAWCAD Pax River,[object Object]
The bench test is performed IAW what manual?,[object Object]
NAVAIR 17-15HB-21,[object Object]
What are the 2 sized of neck seals?,[object Object]
Standard and small,[object Object]
What does the hood inlet valve prevent?,[object Object]
Air from being drawn from the hood and into the orinasal mask,[object Object]
Pr stuff
What are the two compartments inside the mask?,[object Object]
Orinasal area and hood,[object Object]
What are the 3 hood cowl sizes?,[object Object]
XS, standard, XL,[object Object]
What does the H-manifold inlet valve do?,[object Object]
Prevents oxygen from leaking through the pusher fan,[object Object]
What ICU position is recommended for all ground comms?,[object Object]
2nd- talk/listen (acoustic),[object Object]
Where is the hood outlet valve located?,[object Object]
Left side of mask,[object Object]
What is the function of the hood outlet valve?,[object Object]
Permits demisting air to vent,[object Object]
Where is the inhalation valve mounted?,[object Object]
Left side of mask,[object Object]
The nose occluder is available in what sizes?,[object Object]
4mm-7mm,[object Object]
What are the 5 sizes available?,[object Object]
XL, L, S, XS, XXS,[object Object]
What are the 2 sizes and designators of the orinasal mask?,[object Object]
Large – PSmall - Q,[object Object]
The A/PSSP-14(V)1-4 provides protection at what altitudes?,[object Object]
Ground – 43,000,[object Object]
What is configurationA/P22P-14(V)1?,[object Object]
Non-oxygen,[object Object]
What is configurationA/P22P-14(V)2?,[object Object]
LOX,[object Object]
What is configurationA/P22P-14(V)3?,[object Object]
OBOGS,[object Object]
What is configurationA/P22P-14(V)4?,[object Object]
Panel mount regulators,[object Object]
URT-140,[object Object]
What is 121.5 MHz?,[object Object]
Civilian Emergency,[object Object]
What is 243.0 MHz?,[object Object]
Military emergency,[object Object]
What is 282.8 MHz?,[object Object]
International emergency,[object Object]
What is 406.025 MHz?,[object Object]
International emergency message frequency,[object Object]
The URT-140 is waterproof at 50 feet for how long?,[object Object]
15 minutes,[object Object]
What is advanced multi-mode waveform?,[object Object]
Allows signal transmission to occur on two frequencies simultaneously,[object Object]
What is the function of digital messages?,[object Object]
Facilitate the detection and location of a lost pilot,[object Object]
What is the battery storage life?,[object Object]
5 years,[object Object]
The URT-140 transmits on what frequencies?,[object Object]
121.5, 243.0, 406.025,[object Object]
What does the URT-140 transmit on 406.025?,[object Object]
Digital messages,[object Object]
How long, wide and high is the URT-140?,[object Object]
4.9” long2.58 wide1.35 high,[object Object]
The URT-140 is waterproof at two feet for how long?,[object Object]
24 hours,[object Object]
In triple frequency mode, what is the operating life of the battery?,[object Object]
12 hours,[object Object]
On what frequencies does the URT-140 transmit distress signals?,[object Object]
121.5 and 243.0,[object Object]
What is the battery service life?,[object Object]
3 years,[object Object]
At 77 degrees how long will the batteries last in the triple beacon mode?,[object Object]
Greater than 24 hours,[object Object]
How much does the URT-140 weigh?,[object Object]
16 oz,[object Object]
URT-140 MAINTENANCE,[object Object]
How often are stored units tested?,[object Object]
365 days,[object Object]
If the BCN LED blinks 2 times what is indicated?,[object Object]
Battery failure,[object Object]
What is the format of the manufacture date?,[object Object]
YY DDD,[object Object]
Non-RFI radio beacons returned to depot should be placed in what status on JSETS?,[object Object]
pool,[object Object]
If the BCN LED blinks 3 times what is indicated?,[object Object]
RF output failure,[object Object]
How often is the antenna test performed?,[object Object]
3 years,[object Object]
What is the approved battery type?,[object Object]
LSH-14BA,[object Object]
URT-33,[object Object]
The URT-33 transmits on what frequency?,[object Object]
243.0 MHz,[object Object]
How is the URT-33 powered?,[object Object]
9V battery,[object Object]
What is the range of the URT-33?,[object Object]
160 NM @ 30,000’100 NM @ 10,000’,[object Object]
SATELLITE SAR,[object Object]
The C-S system relays emergency information on what frequencies?,[object Object]
121.5, 243.0, 406.025,[object Object]
What are the 3 segments of the C-S system?,[object Object]
Radio beacon, space, ground,[object Object]
Digitally-coded emergency information is transmitted on which frequency?,[object Object]
406.025,[object Object]
The C-S system consists of what satellite subsystems?,[object Object]
LEOSAR and GEOSAR,[object Object]
The LEOSAR system can orbit the Earth in what amount of time?,[object Object]
100 minutes,[object Object]
LEOSAR satellites travel in what direction?,[object Object]
North-South,[object Object]
LEOSAR satellites detect and receive on what frequencies?(COSPAS),[object Object]
121.5 and 406.025,[object Object]
LEOSAR satellites maintained by SARSAT receive and transmit on what frequencies?,[object Object]
121.5, 243.0, 406.025,[object Object]
The GEOSAR satellites orbit the Earth at what altitude and at what latitude?,[object Object]
36,000km, 0 degrees latitude,[object Object]
What does the ground segment consist of?,[object Object]
Local User TerminalsMission Control Centers,[object Object]
PRC-149 THEORY,[object Object]
The radio always defaults to what receiving AM channel?,[object Object]
243.0,[object Object]
The PRC-149 operates in AM transceiver mode at what frequencies?,[object Object]
121.5, 243.0, 282.8,[object Object]
What are the two levels of BIT?,[object Object]
Power-up and maintenance,[object Object]
What is the purpose of the power-up bit?,[object Object]
Verifies the processor works,[object Object]
The maintenance BIT is performed in what mode?,[object Object]
GPS,[object Object]
How often is the maintenance BIT performed?,[object Object]
90 days,[object Object]
COSPAS-SARSAT puts SAR teams within what radius of the downed aircrewman?,[object Object]
2000 meters,[object Object]
How is the radio meant to be held?,[object Object]
Right hand, 3-5” from face,[object Object]
Triple frequency beacon mode transmits on what channels?,[object Object]
121.5, 243.0, 406.025,[object Object]
Burst transmissions during triple frequency bcn are at what intervals?,[object Object]
50 +/- 2.5 seconds,[object Object]
What is the antenna’s maximum radiation?,[object Object]
22 degrees offset,[object Object]
What mode yields the longest battery life?,[object Object]
GPS,[object Object]
How long does it take to acquire GPS position?,[object Object]
2 minutes,[object Object]
How often is GPS position reacquired?,[object Object]
Every 20 minutes,[object Object]
The PRC-149 has how many operating modes?,[object Object]
6,[object Object]
What frequencies are met on channels; AM1, AM2, AM3?,[object Object]
AM1-243.0,  AM2- 282.8, AM3-121.5,[object Object]
How long does the maintenance BIT last?,[object Object]
51 seconds,[object Object]
PRC-149 MAINTENANCE,[object Object]
Battery date codes must fall within how much time of each other?,[object Object]
180 days,[object Object]
How often is a GPS acquisition check performed?,[object Object]
180 days,[object Object]
Maintenance and aircrew personnel should not turn the selector knob past what position?,[object Object]
GPS,[object Object]
To ensure the radio is RFI, you should obtain how many consecutive successful bits?,[object Object]
3,[object Object]
If the BCN LED blinks three times what is indicated?,[object Object]
RF output failure,[object Object]
If the BCN LED blinks 2 times what is indicated?,[object Object]
Battery failure,[object Object]
If the BCN LED blinks 4 times what is indicated?,[object Object]
AM Receiver failure,[object Object]
What is the shelf and service life of batteries?,[object Object]
Shelf= 5 yearsService= 3 years,[object Object]
Following the maintenance BIT, GPS position should be acquired in how much time?,[object Object]
Less than 5 minutes,[object Object]
How often is the maintenance BIT performed?,[object Object]
90 days,[object Object]
PRC-112,[object Object]
If the radio fails any test what action takes place?,[object Object]
Forward to Depot,[object Object]
The PRC-112 is tested at I-level how often?,[object Object]
360 days,[object Object]
What ACB replaced the large VOL/OFF knob with a smaller one?,[object Object]
ACB 860,[object Object]
What is performed prior to placing the radio into service?,[object Object]
90 day inspection,[object Object]

Weitere ähnliche Inhalte

Was ist angesagt?

Sewing Machines Stitch Fundamentals
Sewing Machines Stitch FundamentalsSewing Machines Stitch Fundamentals
Sewing Machines Stitch FundamentalsKAMRAN AHMAD KHAN
 
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...তানজিম দীপ
 
Multi thread chain stitch machines
Multi thread chain stitch machinesMulti thread chain stitch machines
Multi thread chain stitch machinesShubham Singh
 
INDUSTRIAL SEWING MACHINES
INDUSTRIAL SEWING MACHINESINDUSTRIAL SEWING MACHINES
INDUSTRIAL SEWING MACHINESAmit Das
 
U 5 sewing technology
U 5 sewing technologyU 5 sewing technology
U 5 sewing technologykibrom G
 
attachements in sewing
attachements in sewingattachements in sewing
attachements in sewingsuniltalekar1
 
Generic specifications of an overlock machine
Generic specifications of an overlock machineGeneric specifications of an overlock machine
Generic specifications of an overlock machineShubham Singh
 
Seam swing / swing threads / trimmings and accessories
Seam swing / swing threads / trimmings and accessoriesSeam swing / swing threads / trimmings and accessories
Seam swing / swing threads / trimmings and accessoriesMd. Azizul Haque Juel
 
fullness in garment ( tuck dart pleats etc)
fullness in garment ( tuck dart pleats etc)fullness in garment ( tuck dart pleats etc)
fullness in garment ( tuck dart pleats etc)Ragu Nathan
 
Machine Sewing Details
Machine Sewing DetailsMachine Sewing Details
Machine Sewing DetailsShahrina17
 
6stitchclassification 131230044238-phpapp02
6stitchclassification 131230044238-phpapp026stitchclassification 131230044238-phpapp02
6stitchclassification 131230044238-phpapp02Mustafa Rajib
 
Presentation on Garments sewing
Presentation on Garments sewingPresentation on Garments sewing
Presentation on Garments sewingAmanuzzaman Aman
 
Classification of seam, sewing method and use
Classification of seam, sewing method and useClassification of seam, sewing method and use
Classification of seam, sewing method and useMd.Belal Uddin
 
Seam and Seam classes
Seam and Seam classesSeam and Seam classes
Seam and Seam classesRazib Sheikh
 

Was ist angesagt? (20)

Sewing Machines Stitch Fundamentals
Sewing Machines Stitch FundamentalsSewing Machines Stitch Fundamentals
Sewing Machines Stitch Fundamentals
 
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...
Sewing machine presentation.(142 KMT- 1)BGMEA UNIVERSITY OF FASHION AND TECHN...
 
Multi thread chain stitch machines
Multi thread chain stitch machinesMulti thread chain stitch machines
Multi thread chain stitch machines
 
INDUSTRIAL SEWING MACHINES
INDUSTRIAL SEWING MACHINESINDUSTRIAL SEWING MACHINES
INDUSTRIAL SEWING MACHINES
 
U 5 sewing technology
U 5 sewing technologyU 5 sewing technology
U 5 sewing technology
 
attachements in sewing
attachements in sewingattachements in sewing
attachements in sewing
 
Generic specifications of an overlock machine
Generic specifications of an overlock machineGeneric specifications of an overlock machine
Generic specifications of an overlock machine
 
Seam swing / swing threads / trimmings and accessories
Seam swing / swing threads / trimmings and accessoriesSeam swing / swing threads / trimmings and accessories
Seam swing / swing threads / trimmings and accessories
 
Work aids of sewing machines
Work aids of sewing machinesWork aids of sewing machines
Work aids of sewing machines
 
Seam
SeamSeam
Seam
 
Sewing Machine
Sewing MachineSewing Machine
Sewing Machine
 
fullness in garment ( tuck dart pleats etc)
fullness in garment ( tuck dart pleats etc)fullness in garment ( tuck dart pleats etc)
fullness in garment ( tuck dart pleats etc)
 
Machine Sewing Details
Machine Sewing DetailsMachine Sewing Details
Machine Sewing Details
 
6stitchclassification 131230044238-phpapp02
6stitchclassification 131230044238-phpapp026stitchclassification 131230044238-phpapp02
6stitchclassification 131230044238-phpapp02
 
Presentation on Garments sewing
Presentation on Garments sewingPresentation on Garments sewing
Presentation on Garments sewing
 
Flatlock stitches and its Mechanisms
Flatlock stitches and its MechanismsFlatlock stitches and its Mechanisms
Flatlock stitches and its Mechanisms
 
Classification of seam, sewing method and use
Classification of seam, sewing method and useClassification of seam, sewing method and use
Classification of seam, sewing method and use
 
Single needle lock stitch machine
Single needle lock stitch machineSingle needle lock stitch machine
Single needle lock stitch machine
 
Sewing needle
Sewing needleSewing needle
Sewing needle
 
Seam and Seam classes
Seam and Seam classesSeam and Seam classes
Seam and Seam classes
 

Ähnlich wie Pr stuff

types of SEWING MACHINES and parts .pptx
types of SEWING MACHINES and parts .pptxtypes of SEWING MACHINES and parts .pptx
types of SEWING MACHINES and parts .pptxClarinaBergante
 
Sewing machine needle a to z
Sewing machine needle a to zSewing machine needle a to z
Sewing machine needle a to zMd Masudur Rahman
 
operating specialized industrial garment machines level 2.1.ppt
operating specialized industrial garment machines level 2.1.pptoperating specialized industrial garment machines level 2.1.ppt
operating specialized industrial garment machines level 2.1.ppthenok16
 
study on sequential sewing process of trousers/pants .pdf
study on sequential sewing process of trousers/pants .pdfstudy on sequential sewing process of trousers/pants .pdf
study on sequential sewing process of trousers/pants .pdfT. M. Ashikur Rahman
 
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2Md Rakibul Hassan
 
Chapter 1 garment sewing section (GUB)
Chapter 1  garment sewing section (GUB)Chapter 1  garment sewing section (GUB)
Chapter 1 garment sewing section (GUB)MohammadAshraful4
 
L 1 uc-6 prepare sewing machine
L 1 uc-6 prepare sewing machineL 1 uc-6 prepare sewing machine
L 1 uc-6 prepare sewing machinesolomaya
 
New sewing machine
New sewing machineNew sewing machine
New sewing machineSunil Kumar
 
Study on threading process of an industrial Single Needle Lock Stitch (SNLS...
Study on threading process  of an industrial Single Needle Lock Stitch  (SNLS...Study on threading process  of an industrial Single Needle Lock Stitch  (SNLS...
Study on threading process of an industrial Single Needle Lock Stitch (SNLS...T. M. Ashikur Rahman
 
Chapter 3 work aids, velcro & sewing thread
Chapter 3 work aids, velcro & sewing threadChapter 3 work aids, velcro & sewing thread
Chapter 3 work aids, velcro & sewing threadMohammadAshraful4
 
Parts of sewing machine needle
Parts of sewing machine needleParts of sewing machine needle
Parts of sewing machine needleIntrocanvas
 
Introduction of knitting, prepared by students of Daffodil International Univ...
Introduction of knitting, prepared by students of Daffodil International Univ...Introduction of knitting, prepared by students of Daffodil International Univ...
Introduction of knitting, prepared by students of Daffodil International Univ...Matiur Rahman khan Babu
 
Process flow of a Weaving factory.
Process flow of a Weaving factory.Process flow of a Weaving factory.
Process flow of a Weaving factory.SreeTonmoyKumarBhoum
 

Ähnlich wie Pr stuff (20)

Sewing PPT.pptx
Sewing PPT.pptxSewing PPT.pptx
Sewing PPT.pptx
 
BLIND STITCH MACHINE.pptx
BLIND STITCH MACHINE.pptxBLIND STITCH MACHINE.pptx
BLIND STITCH MACHINE.pptx
 
Knitting technology
Knitting technologyKnitting technology
Knitting technology
 
types of SEWING MACHINES and parts .pptx
types of SEWING MACHINES and parts .pptxtypes of SEWING MACHINES and parts .pptx
types of SEWING MACHINES and parts .pptx
 
Sewing machine needle a to z
Sewing machine needle a to zSewing machine needle a to z
Sewing machine needle a to z
 
operating specialized industrial garment machines level 2.1.ppt
operating specialized industrial garment machines level 2.1.pptoperating specialized industrial garment machines level 2.1.ppt
operating specialized industrial garment machines level 2.1.ppt
 
Sewing needle
Sewing needleSewing needle
Sewing needle
 
dressmaking.pptx
dressmaking.pptxdressmaking.pptx
dressmaking.pptx
 
study on sequential sewing process of trousers/pants .pdf
study on sequential sewing process of trousers/pants .pdfstudy on sequential sewing process of trousers/pants .pdf
study on sequential sewing process of trousers/pants .pdf
 
Apparel i (term final)
Apparel i (term final)Apparel i (term final)
Apparel i (term final)
 
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2
(Sir Ashraful Alam) Full PDF Apparel Manufacturing I Sheet Part-2
 
Chapter 1 garment sewing section (GUB)
Chapter 1  garment sewing section (GUB)Chapter 1  garment sewing section (GUB)
Chapter 1 garment sewing section (GUB)
 
dressmaking 7.pptx
dressmaking 7.pptxdressmaking 7.pptx
dressmaking 7.pptx
 
L 1 uc-6 prepare sewing machine
L 1 uc-6 prepare sewing machineL 1 uc-6 prepare sewing machine
L 1 uc-6 prepare sewing machine
 
New sewing machine
New sewing machineNew sewing machine
New sewing machine
 
Study on threading process of an industrial Single Needle Lock Stitch (SNLS...
Study on threading process  of an industrial Single Needle Lock Stitch  (SNLS...Study on threading process  of an industrial Single Needle Lock Stitch  (SNLS...
Study on threading process of an industrial Single Needle Lock Stitch (SNLS...
 
Chapter 3 work aids, velcro & sewing thread
Chapter 3 work aids, velcro & sewing threadChapter 3 work aids, velcro & sewing thread
Chapter 3 work aids, velcro & sewing thread
 
Parts of sewing machine needle
Parts of sewing machine needleParts of sewing machine needle
Parts of sewing machine needle
 
Introduction of knitting, prepared by students of Daffodil International Univ...
Introduction of knitting, prepared by students of Daffodil International Univ...Introduction of knitting, prepared by students of Daffodil International Univ...
Introduction of knitting, prepared by students of Daffodil International Univ...
 
Process flow of a Weaving factory.
Process flow of a Weaving factory.Process flow of a Weaving factory.
Process flow of a Weaving factory.
 

Kürzlich hochgeladen

MC Heights construction company in Jhang
MC Heights construction company in JhangMC Heights construction company in Jhang
MC Heights construction company in Jhangmcgroupjeya
 
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John Meulemans
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John MeulemansBCE24 | Virtual Brand Ambassadors: Making Brands Personal - John Meulemans
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John MeulemansBBPMedia1
 
Developing Coaching Skills: Mine, Yours, Ours
Developing Coaching Skills: Mine, Yours, OursDeveloping Coaching Skills: Mine, Yours, Ours
Developing Coaching Skills: Mine, Yours, OursKaiNexus
 
Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access
 
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...Brian Solis
 
Live-Streaming in the Music Industry Webinar
Live-Streaming in the Music Industry WebinarLive-Streaming in the Music Industry Webinar
Live-Streaming in the Music Industry WebinarNathanielSchmuck
 
Introduction to The overview of GAAP LO 1-5.pptx
Introduction to The overview of GAAP LO 1-5.pptxIntroduction to The overview of GAAP LO 1-5.pptx
Introduction to The overview of GAAP LO 1-5.pptxJemalSeid25
 
Borderless Access - Global Panel book-unlock 2024
Borderless Access - Global Panel book-unlock 2024Borderless Access - Global Panel book-unlock 2024
Borderless Access - Global Panel book-unlock 2024Borderless Access
 
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...TalentView
 
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdf
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdfTalent Management research intelligence_13 paradigm shifts_20 March 2024.pdf
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdfCharles Cotter, PhD
 
Anyhr.io | Presentation HR&Recruiting agency
Anyhr.io | Presentation HR&Recruiting agencyAnyhr.io | Presentation HR&Recruiting agency
Anyhr.io | Presentation HR&Recruiting agencyHanna Klim
 
PDT 88 - 4 million seed - Seed - Protecto.pdf
PDT 88 - 4 million seed - Seed - Protecto.pdfPDT 88 - 4 million seed - Seed - Protecto.pdf
PDT 88 - 4 million seed - Seed - Protecto.pdfHajeJanKamps
 
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISING
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISINGUNLEASHING THE POWER OF PROGRAMMATIC ADVERTISING
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISINGlokeshwarmaha
 
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdf
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdfChicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdf
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdfSourav Sikder
 
To Create Your Own Wig Online To Create Your Own Wig Online
To Create Your Own Wig Online  To Create Your Own Wig OnlineTo Create Your Own Wig Online  To Create Your Own Wig Online
To Create Your Own Wig Online To Create Your Own Wig Onlinelng ths
 
Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access
 
Plano de marketing- inglês em formato ppt
Plano de marketing- inglês  em formato pptPlano de marketing- inglês  em formato ppt
Plano de marketing- inglês em formato pptElizangelaSoaresdaCo
 
Data skills for Agile Teams- Killing story points
Data skills for Agile Teams- Killing story pointsData skills for Agile Teams- Killing story points
Data skills for Agile Teams- Killing story pointsyasinnathani
 
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdf
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdfGraham and Doddsville - Issue 1 - Winter 2006 (1).pdf
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdfAnhNguyen97152
 
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptx
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptxHELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptx
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptxHelene Heckrotte
 

Kürzlich hochgeladen (20)

MC Heights construction company in Jhang
MC Heights construction company in JhangMC Heights construction company in Jhang
MC Heights construction company in Jhang
 
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John Meulemans
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John MeulemansBCE24 | Virtual Brand Ambassadors: Making Brands Personal - John Meulemans
BCE24 | Virtual Brand Ambassadors: Making Brands Personal - John Meulemans
 
Developing Coaching Skills: Mine, Yours, Ours
Developing Coaching Skills: Mine, Yours, OursDeveloping Coaching Skills: Mine, Yours, Ours
Developing Coaching Skills: Mine, Yours, Ours
 
Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024
 
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...
The End of Business as Usual: Rewire the Way You Work to Succeed in the Consu...
 
Live-Streaming in the Music Industry Webinar
Live-Streaming in the Music Industry WebinarLive-Streaming in the Music Industry Webinar
Live-Streaming in the Music Industry Webinar
 
Introduction to The overview of GAAP LO 1-5.pptx
Introduction to The overview of GAAP LO 1-5.pptxIntroduction to The overview of GAAP LO 1-5.pptx
Introduction to The overview of GAAP LO 1-5.pptx
 
Borderless Access - Global Panel book-unlock 2024
Borderless Access - Global Panel book-unlock 2024Borderless Access - Global Panel book-unlock 2024
Borderless Access - Global Panel book-unlock 2024
 
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...
TalentView Webinar: Empowering the Modern Workforce_ Redefininig Success from...
 
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdf
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdfTalent Management research intelligence_13 paradigm shifts_20 March 2024.pdf
Talent Management research intelligence_13 paradigm shifts_20 March 2024.pdf
 
Anyhr.io | Presentation HR&Recruiting agency
Anyhr.io | Presentation HR&Recruiting agencyAnyhr.io | Presentation HR&Recruiting agency
Anyhr.io | Presentation HR&Recruiting agency
 
PDT 88 - 4 million seed - Seed - Protecto.pdf
PDT 88 - 4 million seed - Seed - Protecto.pdfPDT 88 - 4 million seed - Seed - Protecto.pdf
PDT 88 - 4 million seed - Seed - Protecto.pdf
 
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISING
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISINGUNLEASHING THE POWER OF PROGRAMMATIC ADVERTISING
UNLEASHING THE POWER OF PROGRAMMATIC ADVERTISING
 
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdf
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdfChicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdf
Chicago Medical Malpractice Lawyer Chicago Medical Malpractice Lawyer.pdf
 
To Create Your Own Wig Online To Create Your Own Wig Online
To Create Your Own Wig Online  To Create Your Own Wig OnlineTo Create Your Own Wig Online  To Create Your Own Wig Online
To Create Your Own Wig Online To Create Your Own Wig Online
 
Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024Borderless Access - Global B2B Panel book-unlock 2024
Borderless Access - Global B2B Panel book-unlock 2024
 
Plano de marketing- inglês em formato ppt
Plano de marketing- inglês  em formato pptPlano de marketing- inglês  em formato ppt
Plano de marketing- inglês em formato ppt
 
Data skills for Agile Teams- Killing story points
Data skills for Agile Teams- Killing story pointsData skills for Agile Teams- Killing story points
Data skills for Agile Teams- Killing story points
 
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdf
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdfGraham and Doddsville - Issue 1 - Winter 2006 (1).pdf
Graham and Doddsville - Issue 1 - Winter 2006 (1).pdf
 
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptx
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptxHELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptx
HELENE HECKROTTE'S PROFESSIONAL PORTFOLIO.pptx
 

Pr stuff

  • 1.
  • 2.
  • 3.
  • 4.
  • 5.
  • 6.
  • 7.
  • 8.
  • 9.
  • 10.
  • 11.
  • 12.
  • 13.
  • 14.
  • 15.
  • 16.
  • 17.
  • 18.
  • 19.
  • 20.
  • 21.
  • 22.
  • 23.
  • 24.
  • 25.
  • 26.
  • 27.
  • 28.
  • 29.
  • 30.
  • 31.
  • 32.
  • 33.
  • 34.
  • 35.
  • 36.
  • 37.
  • 38.
  • 39.
  • 40.
  • 41.
  • 42.
  • 43.
  • 44.
  • 45.
  • 46.
  • 47.
  • 48.
  • 49.
  • 50.
  • 51.
  • 52.
  • 53.
  • 54.
  • 55.
  • 56.
  • 57.
  • 58.
  • 59.
  • 60.
  • 61.
  • 62.
  • 63.
  • 64.
  • 65.
  • 66.
  • 67.
  • 68.
  • 69.
  • 70.
  • 71.
  • 72.
  • 73.
  • 74.
  • 75.
  • 76.
  • 77.
  • 78.
  • 79.
  • 80.
  • 81.
  • 82.
  • 83.
  • 84.
  • 85.
  • 86.
  • 87.
  • 88.
  • 89.
  • 90.
  • 91.
  • 92.
  • 93.
  • 94.
  • 95.
  • 96.
  • 97.
  • 98.
  • 99.
  • 100.
  • 101.
  • 102.
  • 103.
  • 104.
  • 105.
  • 106.
  • 107.
  • 108.
  • 109.
  • 110.
  • 111.
  • 112.
  • 113.
  • 114.
  • 115.
  • 116.
  • 117.
  • 118.
  • 119.
  • 120.
  • 121.
  • 122.
  • 123.
  • 124.
  • 125.
  • 126.
  • 127.
  • 128.
  • 129.
  • 130.
  • 131.
  • 132.
  • 133.
  • 134.
  • 135.
  • 136.
  • 137.
  • 138.
  • 139.
  • 140.
  • 141.
  • 142.
  • 143.
  • 144.
  • 145.
  • 146.
  • 147.
  • 148.
  • 149.
  • 150.
  • 151.
  • 152.
  • 153.
  • 154.
  • 155.
  • 156.
  • 157.
  • 158.
  • 159.
  • 160.
  • 161.
  • 162.
  • 163.
  • 164.
  • 165.
  • 166.
  • 167.
  • 168.
  • 169.
  • 170.
  • 171.
  • 172.
  • 173.
  • 174.
  • 175.
  • 176.
  • 177.
  • 178.
  • 179.
  • 180.
  • 181.
  • 182.
  • 183.
  • 184.
  • 185.
  • 186.
  • 187.
  • 188.
  • 189.
  • 190.
  • 191.
  • 192.
  • 193.
  • 194.
  • 195.
  • 196.
  • 197.
  • 198.
  • 199.
  • 200.
  • 201.
  • 202.
  • 203.
  • 204.
  • 205.
  • 206.
  • 207.
  • 208.
  • 209.
  • 210.
  • 211.
  • 212.
  • 213.
  • 214.
  • 215.
  • 216.
  • 217.
  • 218.
  • 219.
  • 220.
  • 221.
  • 222.
  • 223.
  • 224.
  • 225.
  • 226.
  • 227.
  • 228.
  • 229.
  • 230.
  • 231.
  • 232.
  • 233.
  • 234.
  • 235.
  • 236.
  • 237.
  • 238.
  • 239.
  • 240.
  • 241.
  • 242.
  • 243.
  • 244.
  • 245.
  • 246.
  • 247.
  • 248.
  • 249.
  • 250.
  • 251.
  • 252.
  • 253.
  • 254.
  • 255.
  • 256.
  • 257.
  • 258.
  • 259.
  • 260.
  • 261.
  • 262.
  • 263.
  • 264.
  • 265.
  • 266.
  • 267.
  • 268.
  • 269.
  • 270.
  • 271.
  • 272.
  • 273.
  • 274.
  • 275.
  • 276.
  • 277.
  • 278.
  • 279.
  • 280.
  • 281.
  • 282.
  • 283.
  • 284.
  • 285.
  • 286.
  • 287.
  • 288.
  • 289.
  • 290.
  • 291.
  • 292.
  • 293.
  • 294.
  • 295.
  • 296.
  • 297.
  • 298.
  • 299.
  • 300.
  • 301.
  • 302.
  • 303.
  • 304.
  • 305.
  • 306.
  • 307.
  • 308.
  • 309.
  • 310.
  • 311.
  • 312.
  • 313.
  • 314.
  • 315.
  • 316.
  • 317.
  • 318.
  • 319.
  • 320.
  • 321.
  • 322.
  • 323.
  • 324.
  • 325.
  • 326.
  • 327.
  • 328.
  • 329.
  • 330.
  • 331.
  • 332.
  • 333.
  • 334.
  • 335.
  • 336.
  • 337.
  • 338.
  • 339.
  • 340.
  • 341.
  • 342.
  • 343.
  • 344.
  • 345.
  • 346.
  • 347.
  • 348.
  • 349.
  • 350.
  • 351.
  • 352.
  • 353.
  • 354.
  • 355.
  • 356.
  • 357.
  • 358.
  • 359.
  • 360.
  • 361.
  • 362.
  • 363.
  • 364.
  • 365.
  • 366.
  • 367.
  • 368.
  • 369.
  • 370.
  • 371.
  • 372.
  • 373.
  • 374.
  • 375.
  • 376.
  • 377.
  • 378.
  • 379.
  • 380.
  • 381.
  • 382.
  • 383.
  • 384.
  • 385.
  • 386.
  • 387.
  • 388.
  • 389.
  • 390.
  • 391.
  • 392.
  • 393.
  • 394.
  • 395.
  • 396.
  • 397.
  • 398.
  • 399.
  • 400.
  • 401.
  • 402.
  • 403.
  • 404.
  • 405.
  • 406.
  • 407.
  • 408.
  • 409.
  • 410.
  • 411.
  • 412.
  • 413.
  • 414.
  • 415.
  • 416.
  • 417.
  • 418.
  • 419.
  • 420.
  • 421.
  • 422.
  • 423.
  • 424.
  • 425.
  • 426.
  • 427.
  • 428.
  • 429.
  • 430.
  • 431.
  • 432.
  • 433.
  • 434.
  • 435.
  • 436.
  • 437.
  • 438.
  • 439.
  • 440.
  • 441.
  • 442.
  • 443.
  • 444.
  • 445.
  • 446.
  • 447.
  • 448.
  • 449.
  • 450.
  • 451.
  • 452.
  • 453.
  • 454.
  • 455.
  • 456.
  • 457.
  • 458.
  • 459.
  • 460.
  • 461.
  • 462.
  • 463.
  • 464.
  • 465.
  • 466.
  • 467.
  • 468.
  • 469.
  • 470.
  • 471.
  • 472.
  • 473.
  • 474.
  • 475.
  • 476.
  • 477.
  • 478.
  • 479.
  • 480.
  • 481.
  • 482.
  • 483.
  • 484.
  • 485.
  • 486.
  • 487.
  • 488.
  • 489.
  • 490.
  • 491.
  • 492.
  • 493.
  • 494.
  • 495.
  • 496.
  • 497.
  • 498.
  • 499.
  • 500.
  • 501.
  • 502.
  • 503.
  • 504.
  • 505.
  • 506.
  • 507.
  • 508.
  • 509.
  • 510.
  • 511.
  • 512.
  • 513.
  • 514.
  • 515.
  • 516.
  • 517.
  • 518.
  • 519.
  • 520.
  • 521.
  • 522.
  • 523.
  • 524.
  • 525.
  • 526.
  • 527.
  • 528.
  • 529.
  • 530.
  • 531.
  • 532.
  • 533.
  • 534.
  • 535.
  • 536.
  • 537.
  • 538.
  • 539.
  • 540.
  • 541.
  • 542.
  • 543.
  • 544.
  • 545.
  • 546.
  • 547.
  • 548.
  • 549.
  • 550.
  • 551.
  • 552.
  • 553.
  • 554.
  • 555.
  • 556.
  • 557.
  • 558.
  • 559.
  • 560.
  • 561.
  • 562.
  • 563.
  • 564.
  • 565.
  • 566.
  • 567.
  • 568.
  • 569.
  • 570.
  • 571.
  • 572.
  • 573.
  • 574.
  • 575.
  • 576.
  • 577.
  • 578.
  • 579.
  • 580.
  • 581.
  • 582.
  • 583.
  • 584.
  • 585.
  • 586.
  • 587.
  • 588.
  • 589.
  • 590.
  • 591.
  • 592.
  • 593.
  • 594.
  • 595.
  • 596.
  • 597.
  • 598.
  • 599.
  • 600.
  • 601.
  • 602.
  • 603.
  • 604.
  • 605.
  • 606.
  • 607.
  • 608.
  • 609.
  • 610.
  • 611.
  • 612.
  • 613.
  • 614.
  • 615.
  • 616.
  • 617.
  • 618.
  • 619.
  • 620.
  • 621.
  • 622.
  • 623.
  • 624.
  • 625.
  • 626.
  • 627.
  • 628.
  • 629.
  • 630.
  • 631.
  • 632.
  • 633.
  • 634.
  • 635.
  • 636.
  • 637.
  • 638.
  • 639.
  • 640.
  • 641.
  • 642.
  • 643.
  • 644.
  • 645.
  • 646.
  • 647.
  • 648.
  • 649.
  • 650.
  • 651.
  • 652.
  • 653.
  • 654.
  • 655.
  • 656.
  • 657.
  • 658.
  • 659.
  • 660.
  • 661.
  • 662.
  • 663.
  • 664.
  • 665.
  • 666.
  • 667.
  • 668.
  • 669.
  • 670.
  • 671.
  • 672.
  • 673.
  • 674.
  • 675.
  • 676.
  • 677.
  • 678.
  • 679.
  • 680.
  • 681.
  • 682.
  • 683.
  • 684.
  • 685.
  • 686.
  • 687.
  • 688.
  • 689.
  • 690.
  • 691.
  • 692.
  • 693.
  • 694.
  • 695.
  • 696.
  • 697.
  • 698.
  • 699.
  • 700.
  • 701.
  • 702.
  • 703.
  • 704.
  • 705.
  • 706.
  • 707.
  • 708.
  • 709.
  • 710.
  • 711.
  • 712.
  • 713.
  • 714.
  • 715.
  • 716.
  • 717.
  • 718.
  • 719.
  • 720.
  • 721.
  • 722.
  • 723.
  • 724.
  • 725.
  • 726.
  • 727.
  • 728.
  • 729.
  • 730.
  • 731.
  • 732.
  • 733.
  • 734.
  • 735.
  • 736.
  • 737.
  • 738.
  • 739.
  • 740.
  • 741.
  • 742.
  • 743.
  • 744.
  • 745.
  • 746.
  • 747.
  • 748.
  • 749.
  • 750.
  • 751.
  • 752.
  • 753.
  • 754.
  • 755.
  • 756.
  • 757.
  • 758.
  • 759.
  • 760.
  • 761.
  • 762.
  • 763.
  • 764.
  • 765.
  • 766.
  • 767.
  • 768.
  • 769.
  • 770.
  • 771.
  • 772.
  • 773.
  • 774.
  • 775.
  • 776.
  • 777.
  • 778.
  • 779.
  • 780.
  • 781.
  • 782.
  • 783.
  • 784.
  • 785.
  • 786.
  • 787.
  • 788.
  • 789.
  • 790.
  • 791.
  • 792.
  • 793.
  • 794.
  • 795.
  • 796.
  • 797.
  • 798.
  • 799.
  • 800.
  • 801.
  • 802.
  • 803.
  • 804.
  • 805.
  • 806.
  • 807.
  • 808.
  • 809.
  • 810.
  • 811.
  • 812.
  • 813.
  • 814.
  • 815.
  • 816.
  • 817.
  • 818.
  • 819.
  • 820.
  • 821.
  • 822.
  • 823.
  • 824.
  • 825.
  • 826.
  • 827.
  • 828.
  • 829.
  • 830.
  • 831.
  • 832.
  • 833.
  • 834.
  • 835.
  • 836.
  • 837.
  • 838.
  • 839.
  • 840.
  • 841.
  • 842.
  • 843.
  • 844.
  • 845.
  • 846.
  • 847.
  • 848.
  • 850.
  • 851.
  • 852.
  • 853.
  • 854.
  • 855.
  • 856.
  • 857.
  • 858.
  • 859.
  • 860.
  • 861.
  • 862.
  • 863.
  • 864.
  • 865.
  • 866.
  • 867.
  • 868.
  • 869.
  • 870.
  • 871.
  • 872.
  • 873.
  • 874.
  • 875.
  • 876.
  • 877.
  • 878.
  • 879.
  • 880.
  • 881.
  • 882.
  • 883.
  • 884.
  • 885.
  • 886.
  • 887.
  • 888.
  • 889.
  • 890.
  • 891.
  • 892.
  • 893.
  • 894.
  • 895.
  • 896.
  • 897.
  • 898.
  • 899.
  • 900.
  • 901.
  • 902.
  • 903.
  • 904.
  • 905.
  • 906.
  • 907.
  • 908.
  • 909.
  • 910.
  • 911.
  • 912.
  • 913.
  • 914.
  • 915.
  • 916.
  • 917.
  • 918.
  • 919.
  • 920.
  • 921.
  • 922.
  • 923.
  • 924.
  • 925.
  • 926.
  • 927.
  • 928.
  • 929.
  • 930.
  • 931.
  • 932.
  • 933.
  • 934.
  • 935.
  • 936.
  • 937.
  • 938.
  • 939.
  • 940.
  • 941.
  • 942.
  • 943.
  • 944.
  • 945.
  • 946.
  • 947.
  • 948.
  • 949.
  • 950.
  • 951.
  • 952.
  • 953.
  • 954.
  • 955.
  • 956.
  • 957.
  • 958.
  • 959.
  • 960.
  • 961.
  • 962.
  • 963.
  • 964.
  • 965.
  • 966.
  • 967.
  • 968.
  • 969.
  • 970.
  • 971.
  • 972.
  • 973.
  • 974.
  • 975.
  • 976.
  • 977.
  • 978.
  • 979.
  • 980.
  • 981.
  • 982.
  • 983.
  • 984.
  • 985.
  • 986.
  • 987.
  • 988.
  • 989.
  • 990.
  • 991.
  • 992.
  • 993.
  • 994.
  • 995.
  • 996.
  • 997.
  • 998.
  • 999.
  • 1000.
  • 1001.
  • 1002.
  • 1003.
  • 1004.
  • 1005.
  • 1006.
  • 1007.
  • 1008.
  • 1009.
  • 1010.
  • 1011.
  • 1012.
  • 1013.
  • 1014.
  • 1015.
  • 1016.
  • 1017.
  • 1018.
  • 1019.
  • 1020.
  • 1021.
  • 1022.
  • 1023.
  • 1024.
  • 1025.
  • 1026.
  • 1027.
  • 1028.
  • 1029.
  • 1030.
  • 1031.
  • 1032.
  • 1033.
  • 1034.
  • 1035.
  • 1036.
  • 1037.
  • 1038.
  • 1039.
  • 1040.
  • 1041.
  • 1042.
  • 1043.
  • 1044.
  • 1045.
  • 1046.
  • 1047.
  • 1048.
  • 1049.
  • 1050.
  • 1051.
  • 1052.
  • 1053.
  • 1054.
  • 1055.
  • 1056.
  • 1057.
  • 1058.
  • 1059.
  • 1060.
  • 1061.
  • 1062.
  • 1063.
  • 1064.
  • 1065.
  • 1066.
  • 1067.
  • 1068.
  • 1069.
  • 1070.
  • 1071.
  • 1072.
  • 1073.
  • 1074.
  • 1075.
  • 1076.
  • 1077.
  • 1078.
  • 1079.
  • 1080.
  • 1081.
  • 1082.
  • 1083.
  • 1084.
  • 1085.
  • 1086.
  • 1087.
  • 1088.
  • 1089.
  • 1090.
  • 1091.
  • 1092.
  • 1093.
  • 1094.
  • 1095.
  • 1096.
  • 1097.
  • 1098.
  • 1099.
  • 1100.
  • 1101.
  • 1102.
  • 1103.
  • 1104.
  • 1105.
  • 1106.
  • 1107.
  • 1108.
  • 1109.
  • 1110.
  • 1111.
  • 1112.
  • 1113.
  • 1114.
  • 1115.
  • 1116.
  • 1117.
  • 1118.
  • 1119.
  • 1120.
  • 1121.
  • 1122.
  • 1123.
  • 1124.
  • 1125.
  • 1126.
  • 1127.
  • 1128.
  • 1129.
  • 1130.
  • 1131.
  • 1132.
  • 1133.
  • 1134.
  • 1135.
  • 1136.
  • 1137.
  • 1138.
  • 1139.
  • 1140.
  • 1141.
  • 1142.
  • 1143.
  • 1144.
  • 1145.
  • 1146.
  • 1147.
  • 1148.
  • 1149.
  • 1150.
  • 1151.
  • 1152.
  • 1153.
  • 1154.
  • 1155.
  • 1156.
  • 1157.
  • 1158.
  • 1159.
  • 1160.
  • 1161.
  • 1162.
  • 1163.
  • 1164.
  • 1165.
  • 1166.
  • 1167.
  • 1168.
  • 1170.
  • 1171.
  • 1172.
  • 1173.
  • 1174.
  • 1175.
  • 1176.
  • 1177.
  • 1178.
  • 1179.
  • 1180.
  • 1181.
  • 1182.
  • 1183.
  • 1184.
  • 1185.
  • 1186.
  • 1187.
  • 1188.
  • 1189.
  • 1190.
  • 1191.
  • 1192.
  • 1193.
  • 1194.
  • 1195.
  • 1196.
  • 1197.
  • 1198.
  • 1199.
  • 1200.
  • 1201.
  • 1202.
  • 1203.
  • 1204.
  • 1205.
  • 1206.
  • 1207.
  • 1208.
  • 1209.
  • 1210.
  • 1211.
  • 1212.
  • 1213.
  • 1214.
  • 1215.
  • 1216.
  • 1217.
  • 1218.
  • 1219.
  • 1220.
  • 1221.
  • 1222.
  • 1223.
  • 1224.
  • 1225.
  • 1226.
  • 1227.
  • 1228.
  • 1229.
  • 1230.
  • 1231.
  • 1232.
  • 1233.
  • 1234.
  • 1235.
  • 1236.
  • 1237.
  • 1238.
  • 1239.
  • 1240.
  • 1241.
  • 1242.
  • 1243.
  • 1244.
  • 1245.
  • 1246.
  • 1247.
  • 1248.
  • 1249.
  • 1250.
  • 1251.
  • 1252.
  • 1253.
  • 1254.
  • 1255.
  • 1256.
  • 1257.
  • 1258.
  • 1259.
  • 1260.
  • 1261.
  • 1262.
  • 1263.
  • 1264.
  • 1265.
  • 1266.
  • 1267.
  • 1268.
  • 1269.
  • 1270.
  • 1271.
  • 1272.
  • 1273.
  • 1274.
  • 1275.
  • 1276.
  • 1277.
  • 1278.
  • 1279.
  • 1280.
  • 1281.
  • 1282.
  • 1283.
  • 1284.
  • 1285.
  • 1286.
  • 1287.
  • 1288.
  • 1289.
  • 1290.
  • 1291.
  • 1292.
  • 1293.
  • 1294.
  • 1295.
  • 1296.
  • 1297.
  • 1298.
  • 1299.
  • 1300.
  • 1301.
  • 1302.
  • 1303.
  • 1304.
  • 1305.
  • 1306.
  • 1307.
  • 1308.
  • 1309.
  • 1310.
  • 1311.
  • 1312.
  • 1313.
  • 1314.
  • 1315.
  • 1316.
  • 1317.
  • 1318.
  • 1319.
  • 1320.
  • 1321.
  • 1322.
  • 1323.
  • 1324.
  • 1325.
  • 1326.
  • 1327.
  • 1328.
  • 1329.
  • 1330.
  • 1331.
  • 1332.
  • 1333.
  • 1334.
  • 1335.
  • 1336.
  • 1337.
  • 1338.
  • 1339.
  • 1340.
  • 1341.
  • 1342.
  • 1343.
  • 1344.
  • 1345.
  • 1346.
  • 1347.
  • 1348.
  • 1349.
  • 1350.
  • 1351.
  • 1352.
  • 1353.
  • 1354.
  • 1355.
  • 1356.
  • 1357.
  • 1358.
  • 1359.
  • 1360.
  • 1361.
  • 1362.
  • 1363.
  • 1364.
  • 1365.
  • 1366.
  • 1367.
  • 1368.
  • 1369.
  • 1370.
  • 1371.
  • 1372.
  • 1373.
  • 1374.
  • 1375.
  • 1376.
  • 1377.
  • 1378.
  • 1379.
  • 1380.
  • 1381.
  • 1382.
  • 1383.
  • 1384.
  • 1385.
  • 1386.
  • 1387.
  • 1388.
  • 1389.
  • 1390.
  • 1391.
  • 1392.
  • 1393.
  • 1394.
  • 1395.
  • 1396.
  • 1397.
  • 1398.
  • 1399.
  • 1400.
  • 1401.
  • 1402.
  • 1403.
  • 1404.
  • 1405.
  • 1406.
  • 1407.
  • 1408.
  • 1409.
  • 1410.
  • 1411.
  • 1412.
  • 1413.
  • 1414.
  • 1415.
  • 1416.
  • 1417.
  • 1418.
  • 1419.
  • 1420.
  • 1421.
  • 1422.
  • 1423.
  • 1424.
  • 1425.
  • 1426.
  • 1427.
  • 1428.
  • 1429.
  • 1430.
  • 1431.
  • 1432.
  • 1433.
  • 1434.
  • 1435.
  • 1436.
  • 1437.
  • 1438.
  • 1439.
  • 1440.
  • 1441.
  • 1442.
  • 1443.
  • 1444.
  • 1445.
  • 1446.
  • 1447.
  • 1448.
  • 1449.
  • 1450.
  • 1451.
  • 1452.
  • 1453.
  • 1454.
  • 1455.
  • 1456.
  • 1457.
  • 1458.
  • 1459.
  • 1460.
  • 1461.
  • 1462.
  • 1463.
  • 1464.
  • 1465.
  • 1466.
  • 1467.
  • 1468.
  • 1469.
  • 1470.
  • 1471.
  • 1472.
  • 1473.
  • 1474.
  • 1475.
  • 1476.
  • 1477.
  • 1478.
  • 1479.
  • 1480.
  • 1481.
  • 1482.
  • 1483.
  • 1484.
  • 1485.
  • 1486.
  • 1487.
  • 1488.
  • 1489.
  • 1490.
  • 1491.
  • 1492.
  • 1493.
  • 1494.
  • 1495.
  • 1496.
  • 1497.
  • 1498.
  • 1499.
  • 1500.
  • 1501.
  • 1502.
  • 1503.
  • 1504.
  • 1505.
  • 1506.
  • 1507.
  • 1508.
  • 1509.
  • 1510.
  • 1511.
  • 1512.
  • 1513.
  • 1514.
  • 1515.
  • 1516.
  • 1517.
  • 1518.
  • 1519.
  • 1520.
  • 1521.
  • 1522.
  • 1523.
  • 1524.
  • 1525.
  • 1526.
  • 1527.
  • 1528.
  • 1529.
  • 1530.
  • 1531.
  • 1532.
  • 1533.
  • 1534.
  • 1535.
  • 1536.
  • 1537.
  • 1538.
  • 1539.
  • 1540.
  • 1541.
  • 1542.
  • 1543.
  • 1544.
  • 1545.
  • 1546.
  • 1547.
  • 1548.
  • 1549.
  • 1550.
  • 1551.
  • 1552.
  • 1553.
  • 1554.
  • 1555.
  • 1556.
  • 1557.
  • 1558.
  • 1559.
  • 1560.
  • 1561.
  • 1562.
  • 1563.
  • 1564.
  • 1565.
  • 1566.
  • 1567.
  • 1568.
  • 1569.
  • 1570.
  • 1571.
  • 1572.
  • 1573.
  • 1574.
  • 1575.
  • 1576.
  • 1577.
  • 1578.
  • 1579.
  • 1580.
  • 1581.
  • 1582.
  • 1583.
  • 1584.
  • 1585.
  • 1586.
  • 1587.
  • 1588.
  • 1589.
  • 1590.
  • 1591.
  • 1592.
  • 1593.
  • 1594.
  • 1595.
  • 1596.
  • 1597.
  • 1598.
  • 1599.
  • 1600.
  • 1601.
  • 1602.
  • 1603.
  • 1604.
  • 1605.
  • 1606.
  • 1607.
  • 1608.
  • 1609.
  • 1610.
  • 1611.
  • 1612.
  • 1613.
  • 1614.
  • 1615.
  • 1616.
  • 1617.
  • 1618.
  • 1619.
  • 1620.
  • 1621.
  • 1622.
  • 1623.
  • 1624.
  • 1625.
  • 1626.
  • 1627.
  • 1628.
  • 1629.
  • 1630.
  • 1631.
  • 1632.
  • 1633.
  • 1634.
  • 1635.
  • 1636.
  • 1637.
  • 1638.
  • 1639.
  • 1640.
  • 1641.
  • 1642.
  • 1643.
  • 1644.
  • 1645.
  • 1646.
  • 1647.
  • 1648.
  • 1649.
  • 1650.
  • 1651.
  • 1652.
  • 1653.
  • 1654.
  • 1655.
  • 1656.
  • 1657.
  • 1658.
  • 1659.
  • 1660.
  • 1661.
  • 1662.
  • 1663.
  • 1664.
  • 1665.
  • 1666.
  • 1667.
  • 1668.
  • 1669.
  • 1670.
  • 1671.
  • 1672.
  • 1673.
  • 1674.
  • 1675.
  • 1676.
  • 1677.
  • 1678.
  • 1679.
  • 1680.
  • 1681.
  • 1682.
  • 1683.
  • 1684.
  • 1685.
  • 1686.
  • 1687.
  • 1688.
  • 1689.
  • 1690.
  • 1691.
  • 1692.
  • 1693.
  • 1694.
  • 1695.
  • 1696.
  • 1697.
  • 1698.
  • 1699.
  • 1700.
  • 1701.
  • 1702.
  • 1703.
  • 1704.
  • 1705.
  • 1706.
  • 1707.
  • 1708.
  • 1709.
  • 1710.
  • 1711.
  • 1712.
  • 1713.
  • 1714.
  • 1715.
  • 1716.
  • 1717.
  • 1718.
  • 1719.
  • 1720.
  • 1721.
  • 1722.
  • 1723.
  • 1724.
  • 1725.
  • 1726.
  • 1727.
  • 1728.
  • 1729.
  • 1730.
  • 1731.
  • 1732.
  • 1733.
  • 1735.
  • 1736.
  • 1737.
  • 1738.
  • 1739.
  • 1740.
  • 1741.
  • 1742.
  • 1743.
  • 1744.
  • 1745.
  • 1746.
  • 1747.
  • 1748.
  • 1749.
  • 1750.
  • 1751.
  • 1752.
  • 1753.
  • 1754.
  • 1755.
  • 1756.
  • 1757.
  • 1758.
  • 1759.
  • 1760.
  • 1761.
  • 1762.
  • 1763.
  • 1764.
  • 1765.
  • 1766.
  • 1767.
  • 1768.
  • 1769.
  • 1770.
  • 1771.
  • 1772.
  • 1773.
  • 1774.
  • 1775.
  • 1776.
  • 1777.
  • 1778.
  • 1779.
  • 1780.
  • 1781.
  • 1782.
  • 1783.
  • 1784.
  • 1785.
  • 1786.
  • 1787.
  • 1788.
  • 1789.
  • 1790.
  • 1791.
  • 1792.
  • 1793.
  • 1794.
  • 1795.
  • 1796.
  • 1797.
  • 1798.
  • 1799.
  • 1800.
  • 1801.
  • 1802.
  • 1803.
  • 1804.
  • 1805.
  • 1806.
  • 1807.
  • 1808.
  • 1809.
  • 1810.
  • 1811.
  • 1812.
  • 1813.
  • 1814.
  • 1815.
  • 1816.
  • 1817.
  • 1818.
  • 1819.
  • 1820.
  • 1821.
  • 1822.
  • 1823.
  • 1824.
  • 1825.
  • 1826.
  • 1827.
  • 1828.
  • 1829.
  • 1830.
  • 1831.
  • 1832.
  • 1833.
  • 1834.
  • 1835.
  • 1836.
  • 1837.
  • 1838.
  • 1839.
  • 1840.
  • 1841.
  • 1842.
  • 1843.
  • 1844.
  • 1845.
  • 1846.
  • 1847.
  • 1848.
  • 1849.
  • 1850.
  • 1851.
  • 1852.
  • 1853.
  • 1854.
  • 1855.
  • 1856.
  • 1857.
  • 1858.
  • 1859.
  • 1860.
  • 1861.
  • 1862.
  • 1863.
  • 1864.
  • 1865.
  • 1866.
  • 1867.
  • 1868.
  • 1869.
  • 1870.
  • 1871.
  • 1872.
  • 1873.
  • 1874.
  • 1875.
  • 1876.
  • 1877.
  • 1878.
  • 1879.
  • 1880.
  • 1881.
  • 1882.
  • 1883.
  • 1884.
  • 1885.
  • 1886.
  • 1887.
  • 1888.
  • 1889.
  • 1890.
  • 1891.
  • 1892.
  • 1893.
  • 1894.
  • 1895.
  • 1896.
  • 1897.
  • 1898.
  • 1899.
  • 1900.
  • 1901.
  • 1902.
  • 1903.
  • 1904.
  • 1905.
  • 1906.
  • 1907.