Features： 1.Ultra thin and light 2.Die casting aluminum cabinet with seamless assembling design 3.Extremely high refresh rate, grey scale and contrast ratio 4.Easy to transport and install, one person can assemble 60 cabinets per hour 5.Module front accessible, each cabinet can be taken out from the whole screen freely 6.Particular buckle design facilitates tool-free fast assembling 7.Consistent supply of product as well as spare parts

1. www.unilumin.com
Unilumin Group Co. Ltd
WHY UPAD?

2. Solutions for the frequent problems
in LED screen rental business
Problem Solution
Heavy, high transportation cost Light, save the transportation cost
Big packaging Each flight case can loads 10 pcs cabinets
Low installation efficiency, various tools needed
Easy to assemble and disassemble, no
additional tools needed
Uneven screen flatness
The flatness can be controlled by cabinet
structure
Fan design creates noise No fan, no noise
Different power and signal cable 2 in 1 power and signal cable
It is inconvenient for urgent maintenance Single module / cabinet front maintenance

3. • Time = money
• Time cannot be saved for later, extra time cannot be borrowed or purchased
• Easy to be used which helps to save the time
• Easy related to both hardware and software
Important points
Important for Events:
Time-saving
Easy to be used

4. Indoor:
P2.5/P3.75/P4/P4.28/P6
Outdoor:
P5.71/P6.667/P8/P10
Available pixel pitch

5. Structure Description-
Cabinet

6. Structure Description-
Beam support
Ground beam and back support Hanging beam

7. Shorter ground beam, no outer
part from LED screen surface
Additional beam support
Connect part between 2 supporting beams
4 in 1 cube hanging beam

8. Cabinet installation
1. Hold the button of prevent
the spanner drop
2. Open the spanner 3. Bring up pothook
4. Connect adjustable screw 5. Press spanner 6. Finish installed

9.  Can be curved
 Can be empty in the middle
 Can be creative different
configuration
 Great return of investment
 Can be used in many different
ways and be easily adapted to
different applications
Flexible for Installation

10. • The cabinet is made from die-cast aluminum, the lockers and
connectors are made from aluminum alloy, which ensure the
product is light and durable.
• Super light- the weight is only 8.5kg(P6) , 9.8kg(P4.28),
10kg(P4), 10kg(P3.75), 11.5kg(P5.71), 11.5kg(P6.667),
11kg(P8), 10.7kg(P10).
• Ultra slim - the thickness is less than 86mm, the thinnest size
on edge is 14mm. 1CBM can load 32 cabinets, which save the
transportation cost significantly.
• High refresh rate of >2000Hz is great for live television
broadcasting.
• Go Green - no fan and less noisy, in others words, decrease
noise pollution while working.
Features

11. • High precision - processed by high precision CNC
machine, the size is accurate to 0.1 mm.
• Convenient and fast - one person can installs at least
60 cabinets within 1 hour without extra hands or any
other tools.
• High reliability - ADC12 aluminum good for heat
dissipation, high strength and hardness, no need extra
fan or cooling plate to help to discharge heat.
• Two layers - module in the front while power supply and
receiving card in the back. Separated layer as it is good
for heat dissipation and prevent from interfering each
other.
Features
No gap

12. IP65 both in front and rear of cabinet
Water spraying test for 3 minutes Simulate raining environment
Ingress Protection
(For Outdoor Only)

13. Internal sending card
Receiving card
External sending card
System Connection
One sending card can loads 1280 x 1024 pixels
If we calculate 1 cabinet as 80 x 80 pixels, then
one sending card can load 192cabinets (16x12)

14. Each cabinet with 2 connectors, cable
in and out
Cable Connection
2-in-1 gold-plated connector (9 pin signal and 3 pin power)
Shield cable (prevent interference between power and signal)

15. Module front access is available, it can be
assembled and disassembled from front side
Single cabinet can be taken out from the
assembled whole screen for maintenance
Power supply and receiving card can be
disassembled from back, there’s no need to
disassemble module from front. It’s very easy
for maintenance
Maintenance

16. Logo can be placed on back of cabinet
Logo placement

17. Each flight case with dimension of 1190*572*770(mm)
can loads 10pcs cabinets
The weight of flight case with 10 cabinets is 131-141kg.
Packaging

18. RED YELLOW
BLACK AND WHITE FACE
16-bit Colors

19. Kremlin Theatre, Russia P10 300sqm
Project references

20. Australia’s Next Top Model Show P3.75 19.35sqm
Project references

21. Project references
Today Show, Australia P3.75 Curved 20sqm

22. Madonna World Tour Concert P10 283.85sqm
Project references

23. Holland Junior Song festival P10 30sqm
Project references

24. Volvo Car Show @ Sao Paulo, Brazil P3.75 50sqm
Project references

25. Australia VALE exhibition P6 46.54sqm
Project references

26. Auto Show in Las Vegas P3.75 30sqm
Project references

27. 企业发展中遇到的困难
www.unilumin.com
3、福永周边的治安、交通环境、电力供应，需要大力改善
福永周边隐患突出，企业已经发生多起人身安全事件，给员工带
来了很多不稳定因素；上下班交通拥堵问题突出，从机场到公
司、公司到机场、公司到南头关，在上下班期间基本上均要发生
拥堵。
公司用电已经不能满足生产需求，每月用电缺口约20%，目前用
柴油发电解决，但成本较高。
www.unilumin.com
Thank you!
Doris Zeng
Sales Engineer | International division | Unilumin Group Co., LTD
Office address: Yongfu Rd #112, Qiaotou Village,Fuyong Town,Baoan District, Shenzhen, China. 518103
Factory address: Shenyu Technology Zone, No. 68, Lanjing Road, Pingshan District, Shenzhen, China. 518118
Tel: + 86 755-29918999-8951
Fax: + 86 755-29912092
Mobile: + 86 15820406202
Email: leddisplay17@unilumin.com
Skype: doris-zengyi
Website: www.unilumin.com