Cutting of metals is one of the crucial stages in the process of metal fabrication. It’s only after the cutting of the metals that they can be molded into desired shapes and sizes. One of the very popular methods of getting it done is the laser cutting process. View More: http://www.altparts.com/lvd

1. Advantages & Disadvantages of
Laser Cutting Process
Cutting of metals is one of the crucial stages in the process of metal
fabrication. It’s only after the cutting of the metals that they can be
molded into desired shapes and sizes. One of the very popular methods
of getting it done is the laser cutting process. With proper use of good
quality laser parts (for example ​LVD Strippit laser parts​, or ​Trumpf laser
parts​) laser cutting process can be very effective. But like the two sides
of every coin, it has some advantages and disadvantages that come
along with it. Let’s have a quick look at them.
Advantages of Laser Cutting Process
● Laser cutting is quick in comparison to other traditional cutting
techniques as most of the work is automated.
● Holding the piece of metal is easier in laser cutting than in
mechanical cutting.
● The cuts obtained by laser are more precise than can be done by
any other method of cutting metals. It’s for the very reason laser
cutting is preferred in industries that require absolute exact size of
metals as an outcome.
● In the laser process, the metal doesn’t come in direct contact with
other metals to facilitate the cut. Hence the metal is more finely
cut without any contaminations.
​http://www.altparts.com/

2. ● In traditional processes where heat becomes the weapon to cut
metals, the edge of the metal usually deforms to some extent but
laser cutting gives you a fine edge metal cutting.
● The versatility of the process lets you engrave delicate designs on
different metals.
● Laser cutting process requires less energy for cutting the metals
than other traditional methods.
Disadvantages of Laser Cutting Process
● Laser cutting demands high power consumption as compared to
other techniques.
● The laser beam is very delicate to handle. A slight mistake while
adjusting the distance and temperature can lead to burning or
discoloring of the metal.
● The laser beam is harmful if it comes in contact with human
workers. It can cause severe burns if it happens accidentally.
● Laser cutting is still not capable of cutting thick metals.
● The production is not consistent in laser cutting as the time for
cutting various metals may vary.
● It does not compliment all types of metals.
While you can find other cutting methods which are inexpensive and
being preferred since a long time, you cannot ignore the plus points that
laser cutting has to offer. The quality of cut that laser cutting provides
can hardly be achieved by other methods available for carrying the
process.
​http://www.altparts.com/

3. View More :
● http://www.altparts.com/
● http://www.altparts.com/amada
● http://www.altparts.com/trumpf
● http://www.altparts.com/mazak
● http://www.altparts.com/bystronic
● http://www.altparts.com/lvd
​http://www.altparts.com/