1.
Foot Step Power Generation Using
piezoelectric material
Group Members
1.Muhammad Ajmal
2.Waseem Sarwar
3.Maria Anum
Department of Electrical engineering
Supervisor Engr Awais Masood
APCOMS Insignia

2.
Contents
 Problem statement
 Brief Introduction
 Type of project
 Literature Review
 Block diagram
 Tentative Time line
 FYP Objective
 FYP Outcome
 Q &A

3.
Problem statement
 In Pakistan the demand is more than the daily energy produced so we are
facing power-cut after approximate 1 hour and industries are in hell these
days. People uses rechargeable batteries (UPS) or diesel/petrol engine to
fulfill their demands. The use of stand by generator is common in
industries and large offices.We will generate electrical energy using
piezoelectric material (which convert Mechanical stress into Electrical
Energy) and will control the output with microcontroller.
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

4.
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A
Brief Introduction
 This project is used to generate voltage using footstep force. The
proposed system works as a medium to generate power using force.
This project is very useful in public places like bus stands, theaters,
railway stations, shopping malls, etc.

5.
 Implementation type
 60 % hardware
 35 % software
 5 % research paper
Type of project
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

6.
Literature Review
• Generation of Electrical Power through Foot steps K.Ramakrishna,
Guruswamy Revana and Venu Madhav Gopaka International Journal of
Multidisciplinary and Current Research 20 Sept 2014, Vol.2
• Electrical Power Generation Using Piezoelectric Crystal Anil Kumar,
International Journal of Scientific & Engineering Research Volume 2, Issue
5, May-2011
• Henry A. Sodano, Daniel J. Inman, Gyuhae Park “Estimation of
Electric Charge Output for Piezoelectric Energy Harvesting”,LA-UR-
04-2449, Strain Journal, 40(2), 49-58, 2004
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

7.
Block diagram
Piezoelectric
Transducer
Battery
AC Ripple
Neutralizer LCD
Load
Micro
Controller
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

8.
Tentative Time line
Months -> Sep Oct Nov Dec Jan Feb Mar Apr May
Literature Review ✔ ✔ ✔ ✔ ✔ ✔
Software design ✔ ✔ ✔ ✔ ✔ ✔ ✔
Controller design ✔ ✔ ✔
Hardware ✔ ✔ ✔ ✔ ✔
Thesis and Report
Writing
✔ ✔ ✔ ✔ ✔ ✔
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

9.
FYP Objective
 Human/bio-energy being wasted if
it can be made possible for
utilization it will be great invention
and crowd energy farms will be very
useful energy sources in crowded
countries.
 Pollution less generation
 Noise less generation
 Fuel less
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

10.
FYP Deliverables
 This project is used to generate voltage using footstep force.
 With the help of this voltage produce will be used to run different loads.
 An LCD showing the piezoelectric sensor output and battery parameters
 Controller to charge the battery
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A

11.
Question & answers??
Problem statement Brief Introduction Type of project Literature Review Block diagram Tentative Time line FYP Objective FYP Outcome Q &A