2. GENERAL PRESENTATION
■ THE NOVARC GROUP – ESP DIVISION
1/ To protect operators against electrical risks to work in total confidence on the network
2/ To provide secured, easy to use and reliable products
3/ To improve maintenance and operations on the network
5. GENERAL PRESENTATION
■ THE NOVARC GROUP - ESP DIVISION
Our know how
100% Products design and made in France
Compliance with the EN and IEC standard
More 60 years experience in electrical safety equipments
6. MAINTENANCE AND OPERATION ON THE HIGH VOLTAGE NETWORK
UNDERGROUND OPERATIONS
OVERHEADLINE OPERATIONS
13. MV Voltage Detector VECTOR
Lateral windows for
indication duplication
Protection of built-in
multi-sensor
Designed to cross
spy hole more easily
Replaceab
le pole
adaptersHarder shell for better shock
resistance
Go / No go
indications
Integral
self test
14. MV Voltage Detector VECTOR
■ Specifications of the MV Voltage DetectorSpecifications of the MV Voltage Detector
15. MV Voltage Detector VECTOR
■ Specifications of the MV Voltage DetectorSpecifications of the MV Voltage Detector
16. MV Voltage Detector VECTOR
■ Functions of the MV Voltage DetectorFunctions of the MV Voltage Detector
17. MV Voltage Detector VECTOR
■ Standard and EnvironmentStandard and Environment
18. HV DEAD UNDERGROUND NETWORK
■ EARTHING & SHORT-CIRCUITING
21. LV&HV Disconnected Cable identifier FC2300 (+FC2100)
Reliability :
strongs
connectors
Protected : unbreakable
polypropylene copolymer case.
Operating
instructions
always in
the box
Dedicated
probe
Go / No
go
indicatio
n
Availability :
mains or
battery
powered
22. LV&HV Disconnected Cable identifier FC2300 (+FC2100)
■ Functions of the LV Phase and Circuit IdentifierFunctions of the LV Phase and Circuit Identifier
This device provides all the indications necessary on a jobsite on a
disconnected, earthed power cable up to 10 km long :
Identification of three-phase power cables in open trenches.
Identification of the tree phase conductors on 3-pole or single-pole cables.
Continuity with the end of the cable earthed.
There is a probe for each function : the detector identifies the probe and
adjusts to the function :
-Continuity testing
-Colour/phase conductor identification
-Identification of polymer insulated cable
-Identification of paper insulation lead covered cable
-Colour/phase conductor identification on cut cables, compass probe.
23. LV&HV Disconnected Cable identifier FC2300 (+FC2100)
■ Specifications of the LV Phase and Circuit IdentifierSpecifications of the LV Phase and Circuit Identifier
Transmitter
Works on up to 10 km on a cable with a cross-section of 240 mm²
3 injection clamps, L1, L2 and L3, opening : 50mm
Max. length of voice message 3.4 s
Transmission cycle : 7 s
Battery life 8 to 9 hrs. Full charge in 5 hrs
Injection current 6 mA at 300 mA
Batteries 8.75 V (7 x 1.25 V, NiMH)
Battery charger AC 100-240 V – 50-60 Hz – 0.5 A/ DC 12 V
Detection frequency 580Hz, 620Hz, 680Hz
Audio dual-tone frequencies 1280 Hz, 1310 Hz
Detector :
3 setting levels according to the length and type of cable.
Dedicated probes for each function.
24. LV&HV Disconnected Cable identifier FC2300 (+FC2100)
■ Specifications of the LV Phase and Circuit IdentifierSpecifications of the LV Phase and Circuit Identifier
Comes in shockproof polymer carry case : detachable injection module, to be left in the
substation.
Weight of complete case : 11 kg. Dimensions : 475 x 415 x 215 mm.
Transmission clamps :
Injection, into each of the 2 phases L1 and L3 of the cable, of signals compatible with
the FC2000 range of cable identifiers.
Power supply : rechargeable battery integrated in each clamp
Battery life more than 8 hours, for a full charge time of 3 hours.
Detector :
Detection by direct contact the cores of the cut cables using a “compass”
Type probe :
Phases ABC are directly displayed by diodes (green for L1, yellow for L2 and red for L3)
Standalone power supply with 4 AA batteries.
Battery capacity more than 1,000 measurements.
Weight : 2 kg
26. • 1 Presentation Picoup:
Remote control
case
Head cutting
Protection: IP 65
Electric cable
Quick connector
plug
Hydraulic Pump
26
Body in aircraft
aluminum
Protection: IP 65
HYDRAULIC CABLE SPIKER AND CUTTER
27. HV DEAD OVERHEADLINE NETWORK
■ EARTHING and SHORT-CIRCUITING
28. HV DEAD OVERHEADLINE NETWORK
■ EARTHING and SHORT-CIRCUITING
29. HV DEAD OVERHEADLINE NETWORK
■ EARTHING and SHORT-CIRCUITING
32. HV Phase comparator TAG5000 S
No hazard due to a cable
link
No hazard due to a cable
link
Safety probes for indoor
use
Positive indication for « in phase »
conditions
Increase distance of operation
(25m plus)
Possibility of phasing through walls
(inside outside)
33. ■ Functions of the HV Phase comparatorFunctions of the HV Phase comparator
HV Phase comparator TAG5000 S
34. RANGES OF PRODUCTS
■ CABLE PREPARATION TOOLS
35. RANGES OF PRODUCTS
■ SUBSTATION EQUIPEMENT/ RESCUE EQUIPMENT