SlideShare ist ein Scribd-Unternehmen logo
1 von 12
Downloaden Sie, um offline zu lesen
SAMSUNG ® SCX 4725
         CARTRIDGE REMANUFACTURING INSTRUCTIONS




                                                                                 SAMSUNG SCX 4725 PRINTER




                                                                     SAMSUNG SCX 4725 TONER CARTRIDGE




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS


        REMANUFACTURING THE SAMSUNG SCX-4725 TONER CARTRIDGE
                                                                                                    By Mike Josiah

      First released in January 2008, the Samsung SCX-4725 multifunction printers are based on a 24ppm, 1200
      x 1200 dpi engine. The cartridge is an all in one type that has a chip that must be replaced each cycle.
      Depending on the model, the machines are an MFP that can print, Copy, Scan (Color) and fax (SCX-4725FN
      only).

      These cartridges do not have a built in drum cover, but do come new with a plastic form fitting drum cover.
      For these cartridges Samsung has stopped using the heavy paper wrap.

      While we will not be going into the printing theory on this cartridge, it should be noted that the printer uses
      a Pre-Transfer Lamp (PTL). This lamp basically shines a light onto the OPC drum which lowers the charge on
      the drums surface and improves the transfer efficiency.

      Another interesting fact about these machines is that in addition to the normal Toner Low and Toner Empty
      messages there is also a “Drum Warning” message. This message first appears when a cartridge is near-
      ing 14,000 pages. The service manual states that after 15,000 pages, the waste hopper may overflow. The
      cartridge will shut down at this point regardless of the amount of toner left. The HY cartridges are rated for
      3,000 pages so reaching that point is doubtful. Once toner empty state has been reached the cartridge will
      shut down so the only way for a cartridge to get that high a page count is if very little if any toner is used per
      page.

      The HY replacement cartridge is rated for 3,000 pages at 5% coverage (ISO 19752). The starter cartridge
      (SCX-4525FN) is rated for 1000 pages. The HY cartridge I have seen listed with two different part numbers.
      The Samsung web site shows it as SCX-D4725A/XAA, the Service manual lists the SCX-4725D3 number.
      From what I can find the SCX-D4725A is the correct number, but in case you come across the D3#, you know
      what it is.

      So far there are 2 machines in this series. The SCX-4725FN and the SCX-4725F.


      REQUIRED TOOLS
      • Toner approved vacuum
      • A small Common screw driver
      • A Phillips head screwdriver
      • Needle nose pliers


      REQUIRED SUPPLIES
      • Samsung SCX-4725 Toner 85g
      • Conductive Grease
      • Drum lubricating powder




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      1. Place the cartridge with the handle facing away from you.                                                  2. Gently pry off the left end cap.
      Remove the 2 screws on the left end cap.




      3. In the front edge of the cartridge, there are two screws,                                                  4. Lift up and remove the waste chamber from the cartridge.
      remove them.                                                                                                  Make sure the tabs on the left and right sides slide out of the
                                                                                                                    slot. If you try to lift the cover off with out sliding the tab out,
                                                                                                                    they will break off.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




        5. Remove the two screws and wiper blade from the waste chamber. Clean out any remaining toner from the waste chamber.




      6. Re-install the wiper blade and two screws. Place the waste                                                 7. Remove the two screws from the right side end cap.
      chamber aside.                                                                                                Carefully pry off the end cap.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      8. Remove the 4 gears, and place aside.                                                                       9. Slide the PCR away from the contact side, lift up and
                                                                                                                    remove.

                                                                                                                    Clean the PCR with your normal PCR cleaner.

                                                                                                                    WARNING: Do not clean the OEM PCR with alcohol, as this will
                                                                                                                    remove the conductive coating from the roller. If the PCR is an
                                                                                                                    aftermarket, follow the cleaning methods recommended by
                                                                                                                    the manufacturer. If the PCR is an OEM, we recommend it be
                                                                                                                    cleaned with your standard PCR cleaner




      10. Remove the OPC drum.                                                                                      11. Carefully pry out the fill plug. It fits tight and is easily dam-
                                                                                                                    aged. Work a small jeweler’s screwdriver around the edge until
                                                                                                                    the plug comes free.

                                                                                                                    Clean out any remaining toner from the hopper.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      12. Gently pry out the roller plate from the cartridge by pressing in on a tab located on the bottom of the cartridge. There is a
      spring that is in contact with the developer roller shaft. Move the tail of the spring up so that as the plate is lifted out, it will fall
      behind it.




      13. Remove the Developer Roller by lifting it out.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      14. Remove the 2 screws on the doctor blade. On the fill plug side of the blade, there is the other tail of the spring. Lift it up while
      removing the doctor blade so it is not damaged.

      It is highly recommended that the Doctor Blade be cleaned. Failure to do so will cause streaking. Dampen a cotton swab with
      alcohol, and clean the blade. Be careful not to press too hard and damage the blade. If the blade has a heavy buildup of toner
      on it, clean it with Acetone, and then alcohol.




      15. Clean the feed roller and any remaining toner from the
      hopper.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




                           16. Re-install the doctor blade and two screws. Make sure the tail of the spring fits into the proper slot.




      17. Install the developer roller, keyed end to the gear side of
      the cartridge.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      18. Install the roller plate. Route the tail of the spring so that it sits on top of the plate and is in contact with the shaft of the devel-
      oper roller. Lock the plate in place with the tab.




      19. Install the 4 gears as shown.                                                                             20. Install the drum in place.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




      21. Clean out the old conductive grease from the PCR contact                                                  22. Install the PCR by sliding it through the non contact side,
      hub and replace with new. A small amount of grease is fine,                                                   and into the contact hub.
      more is not better when it comes to conductive grease.




      23. Fill the hopper with the appropriate toner. Replace the fill                                              24. Install the gear side end cap, and 2 screws. Make sure the
      plug, check for leaks.                                                                                        PCR fits correctly in its holder, and all the gears are aligned.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




          25. Install the waste chamber by sliding the tab through the slot in the end cap. Rotate it down, and install the two screws.




      26. On the Non-gear end cap, the chip needs to be replaced before it is installed back on the cartridge. There are 2 tabs that lock
      the chip housing in. Carefully pry up the two tabs. Remove and replace the chip. Snap the chip housing back in place.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS




                   27. Install the non-gear end cap and two screws. Make sure the end cap sits flush with the rest of the cartridge.



       PRINTING TEST PAGES
      As these machines are also copiers, a simply copy of a good test page should be all you need.

      RUNNING THE DRUM CLEANING PAGE
      1. Press the “Menu” button until MAINTENANCE appears on the display.
      2. Press “Enter”
      3. Press the “Left” or “Right” arrows until CLEAN DRUM appears on the Display
      4. Press “Enter”
      5. Press the “Left” or “Right” arrows until YES appears on the Display
      6. Press “Enter”


      REPETITIVE DEFECT CHART
      OPC Drum             75.5mm
      Lower Fuser Roller   75.4mm
      Upper fuser roller   63.9mm
      Supply Roller        47.5mm
      Transfer roller      46.2mm
      PCR                  37.7mm
      Developer Roller     35.2mm


      MACHINE ERROR CODES
      These machines use plain English error messages so there is no need to go into them here.




  3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.

Weitere ähnliche Inhalte

Ähnlich wie Manual de Recarga Samsung 4725ELS | 4725F | 4725FN | SCX-4725

Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250
Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250
Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250Valejet
 
Manual de Recarga Lexmark C522
Manual de Recarga Lexmark C522Manual de Recarga Lexmark C522
Manual de Recarga Lexmark C522Valejet
 
Okidata C5100 Reman Eng
Okidata C5100 Reman EngOkidata C5100 Reman Eng
Okidata C5100 Reman Engguestcc3dbe
 
Manual de Recarga Okidata C7000 | C7100 Espanhol
Manual de Recarga Okidata C7000 | C7100 EspanholManual de Recarga Okidata C7000 | C7100 Espanhol
Manual de Recarga Okidata C7000 | C7100 EspanholValejet
 
Manual de Recarga Okidata 7100 Espanhol.
Manual de Recarga Okidata 7100 Espanhol.Manual de Recarga Okidata 7100 Espanhol.
Manual de Recarga Okidata 7100 Espanhol.Valejet
 
Manual de Recarga Lexmark C760 | C762 | C750 | C752
Manual de Recarga Lexmark C760 | C762 | C750 | C752Manual de Recarga Lexmark C760 | C762 | C750 | C752
Manual de Recarga Lexmark C760 | C762 | C750 | C752Valejet
 
Hp pro 400_mfp_m425_cf280
Hp pro 400_mfp_m425_cf280Hp pro 400_mfp_m425_cf280
Hp pro 400_mfp_m425_cf280Ngan TNHH
 
Manual de Recarga HP CP2025.
Manual de Recarga HP CP2025.Manual de Recarga HP CP2025.
Manual de Recarga HP CP2025.Valejet
 
Manual de Recarga HP 2600
Manual de Recarga HP 2600Manual de Recarga HP 2600
Manual de Recarga HP 2600Valejet
 
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...Thorne & Derrick International
 
Instructions PULSAR Forward DN55 Digital NV | Optics Trade
Instructions PULSAR Forward DN55 Digital NV | Optics TradeInstructions PULSAR Forward DN55 Digital NV | Optics Trade
Instructions PULSAR Forward DN55 Digital NV | Optics TradeOptics-Trade
 
User manual for dukan 895x projectors
User manual for dukan 895x projectorsUser manual for dukan 895x projectors
User manual for dukan 895x projectorsDukaneAVMarketing
 
User manual for dukan 895x projectors
User manual for dukan 895x projectorsUser manual for dukan 895x projectors
User manual for dukan 895x projectorsSchoolVision Inc.
 
User manual dukane 8957,8958, 8959
User manual dukane 8957,8958, 8959User manual dukane 8957,8958, 8959
User manual dukane 8957,8958, 8959DukaneAVMarketing
 
Instruction Manual ATN Night Scout VX NV Binoculars | Optics Trade
Instruction Manual ATN Night Scout VX NV Binoculars | Optics TradeInstruction Manual ATN Night Scout VX NV Binoculars | Optics Trade
Instruction Manual ATN Night Scout VX NV Binoculars | Optics TradeOptics-Trade
 
Chip upgrade installation instruction for audi tt vw jetta gti golf
Chip upgrade installation instruction for audi tt vw jetta gti golfChip upgrade installation instruction for audi tt vw jetta gti golf
Chip upgrade installation instruction for audi tt vw jetta gti golfautoobdtools
 

Ähnlich wie Manual de Recarga Samsung 4725ELS | 4725F | 4725FN | SCX-4725 (20)

Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250
Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250
Manual de Recarga Samsung ML 2251N | ML 2251NP | ML 2251W | ML 2250
 
Manual de Recarga Lexmark C522
Manual de Recarga Lexmark C522Manual de Recarga Lexmark C522
Manual de Recarga Lexmark C522
 
Okidata C5100 Reman Eng
Okidata C5100 Reman EngOkidata C5100 Reman Eng
Okidata C5100 Reman Eng
 
Manual de Recarga Okidata C7000 | C7100 Espanhol
Manual de Recarga Okidata C7000 | C7100 EspanholManual de Recarga Okidata C7000 | C7100 Espanhol
Manual de Recarga Okidata C7000 | C7100 Espanhol
 
Manual de Recarga Okidata 7100 Espanhol.
Manual de Recarga Okidata 7100 Espanhol.Manual de Recarga Okidata 7100 Espanhol.
Manual de Recarga Okidata 7100 Espanhol.
 
Manual de Recarga Lexmark C760 | C762 | C750 | C752
Manual de Recarga Lexmark C760 | C762 | C750 | C752Manual de Recarga Lexmark C760 | C762 | C750 | C752
Manual de Recarga Lexmark C760 | C762 | C750 | C752
 
Hp pro 400_mfp_m425_cf280
Hp pro 400_mfp_m425_cf280Hp pro 400_mfp_m425_cf280
Hp pro 400_mfp_m425_cf280
 
Manual de Recarga HP CP2025.
Manual de Recarga HP CP2025.Manual de Recarga HP CP2025.
Manual de Recarga HP CP2025.
 
Foc pulling
Foc pullingFoc pulling
Foc pulling
 
Manual de Recarga HP 2600
Manual de Recarga HP 2600Manual de Recarga HP 2600
Manual de Recarga HP 2600
 
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...
UKPN 11kV 6.6kV HV Cable Jointing, Preparation & Installation Manual (Uncontr...
 
celulares.pdf
celulares.pdfcelulares.pdf
celulares.pdf
 
Instructions PULSAR Forward DN55 Digital NV | Optics Trade
Instructions PULSAR Forward DN55 Digital NV | Optics TradeInstructions PULSAR Forward DN55 Digital NV | Optics Trade
Instructions PULSAR Forward DN55 Digital NV | Optics Trade
 
Dmcfz28
Dmcfz28Dmcfz28
Dmcfz28
 
Panasonic dmc-fz28
Panasonic   dmc-fz28Panasonic   dmc-fz28
Panasonic dmc-fz28
 
User manual for dukan 895x projectors
User manual for dukan 895x projectorsUser manual for dukan 895x projectors
User manual for dukan 895x projectors
 
User manual for dukan 895x projectors
User manual for dukan 895x projectorsUser manual for dukan 895x projectors
User manual for dukan 895x projectors
 
User manual dukane 8957,8958, 8959
User manual dukane 8957,8958, 8959User manual dukane 8957,8958, 8959
User manual dukane 8957,8958, 8959
 
Instruction Manual ATN Night Scout VX NV Binoculars | Optics Trade
Instruction Manual ATN Night Scout VX NV Binoculars | Optics TradeInstruction Manual ATN Night Scout VX NV Binoculars | Optics Trade
Instruction Manual ATN Night Scout VX NV Binoculars | Optics Trade
 
Chip upgrade installation instruction for audi tt vw jetta gti golf
Chip upgrade installation instruction for audi tt vw jetta gti golfChip upgrade installation instruction for audi tt vw jetta gti golf
Chip upgrade installation instruction for audi tt vw jetta gti golf
 

Mehr von Valejet

Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6
Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6
Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6Valejet
 
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000Valejet
 
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100Valejet
 
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8Valejet
 
Manual de Recarga Samsung ML 1630 | SCX 4500
Manual de Recarga Samsung ML 1630 | SCX 4500Manual de Recarga Samsung ML 1630 | SCX 4500
Manual de Recarga Samsung ML 1630 | SCX 4500Valejet
 
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010Valejet
 
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 Espanhol
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 EspanholManual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 Espanhol
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 EspanholValejet
 
Manual de Recarga Samsung CLP 600
Manual de Recarga Samsung CLP 600Manual de Recarga Samsung CLP 600
Manual de Recarga Samsung CLP 600Valejet
 
Manual de Recarga Samsung CLP 600 CLP 650
Manual de Recarga Samsung CLP 600 CLP 650Manual de Recarga Samsung CLP 600 CLP 650
Manual de Recarga Samsung CLP 600 CLP 650Valejet
 
Manual de Recarga Samsung CLP 500 CLP 550
Manual de Recarga Samsung CLP 500 CLP 550Manual de Recarga Samsung CLP 500 CLP 550
Manual de Recarga Samsung CLP 500 CLP 550Valejet
 
Manual de Recarga Ricoh Type 1135
Manual de Recarga Ricoh Type 1135Manual de Recarga Ricoh Type 1135
Manual de Recarga Ricoh Type 1135Valejet
 
Manual de Recarga Okidata C5500 | 6100 Espanhol
Manual de Recarga Okidata C5500 | 6100 EspanholManual de Recarga Okidata C5500 | 6100 Espanhol
Manual de Recarga Okidata C5500 | 6100 EspanholValejet
 
Manual de Recarga Okidata C5100 Espanhol
Manual de Recarga Okidata C5100 EspanholManual de Recarga Okidata C5100 Espanhol
Manual de Recarga Okidata C5100 EspanholValejet
 
Manual de Recarga Okidata C3400
Manual de Recarga Okidata C3400Manual de Recarga Okidata C3400
Manual de Recarga Okidata C3400Valejet
 
Manual de Recarga Okidata 9000 Espanhol
Manual de Recarga Okidata 9000 EspanholManual de Recarga Okidata 9000 Espanhol
Manual de Recarga Okidata 9000 EspanholValejet
 
Manual de Recarga Minolta QMS 2400
Manual de Recarga Minolta QMS 2400Manual de Recarga Minolta QMS 2400
Manual de Recarga Minolta QMS 2400Valejet
 
Manual de Recarga Minolta 2300 DL
Manual de Recarga Minolta 2300 DLManual de Recarga Minolta 2300 DL
Manual de Recarga Minolta 2300 DLValejet
 
Manual de Recarga Lexmark T640 | T642 | T644
Manual de Recarga Lexmark T640 | T642 | T644Manual de Recarga Lexmark T640 | T642 | T644
Manual de Recarga Lexmark T640 | T642 | T644Valejet
 
Manual de Recarga Lexmark T520 | T522
Manual de Recarga Lexmark T520 | T522Manual de Recarga Lexmark T520 | T522
Manual de Recarga Lexmark T520 | T522Valejet
 
Manual de Recarga Lexmark T430
Manual de Recarga Lexmark T430Manual de Recarga Lexmark T430
Manual de Recarga Lexmark T430Valejet
 

Mehr von Valejet (20)

Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6
Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6
Manual de Recarga Samsung ML 1440 | ML 1450 | ML 1451 | ML 6040 | ML6060D6
 
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000
Manual de Recarga Samsung 5050 | 5100 | 5500 | ML 5000
 
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100
Manual de Recarga Samsung ML 1710 | SCX 4216 | SCX 4200 | SCX 4100
 
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8
Manual de Recarga Samsung ML 1650 | ML 1651N | ML1650D8
 
Manual de Recarga Samsung ML 1630 | SCX 4500
Manual de Recarga Samsung ML 1630 | SCX 4500Manual de Recarga Samsung ML 1630 | SCX 4500
Manual de Recarga Samsung ML 1630 | SCX 4500
 
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010
Manual de Recarga Samsung ML 1210 | ML 1510 | ML 1610 | ML 1710 | ML 2010
 
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 Espanhol
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 EspanholManual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 Espanhol
Manual de Recarga Samsung CLP 610N | CLP 660N | CLP 610 CLP 660 Espanhol
 
Manual de Recarga Samsung CLP 600
Manual de Recarga Samsung CLP 600Manual de Recarga Samsung CLP 600
Manual de Recarga Samsung CLP 600
 
Manual de Recarga Samsung CLP 600 CLP 650
Manual de Recarga Samsung CLP 600 CLP 650Manual de Recarga Samsung CLP 600 CLP 650
Manual de Recarga Samsung CLP 600 CLP 650
 
Manual de Recarga Samsung CLP 500 CLP 550
Manual de Recarga Samsung CLP 500 CLP 550Manual de Recarga Samsung CLP 500 CLP 550
Manual de Recarga Samsung CLP 500 CLP 550
 
Manual de Recarga Ricoh Type 1135
Manual de Recarga Ricoh Type 1135Manual de Recarga Ricoh Type 1135
Manual de Recarga Ricoh Type 1135
 
Manual de Recarga Okidata C5500 | 6100 Espanhol
Manual de Recarga Okidata C5500 | 6100 EspanholManual de Recarga Okidata C5500 | 6100 Espanhol
Manual de Recarga Okidata C5500 | 6100 Espanhol
 
Manual de Recarga Okidata C5100 Espanhol
Manual de Recarga Okidata C5100 EspanholManual de Recarga Okidata C5100 Espanhol
Manual de Recarga Okidata C5100 Espanhol
 
Manual de Recarga Okidata C3400
Manual de Recarga Okidata C3400Manual de Recarga Okidata C3400
Manual de Recarga Okidata C3400
 
Manual de Recarga Okidata 9000 Espanhol
Manual de Recarga Okidata 9000 EspanholManual de Recarga Okidata 9000 Espanhol
Manual de Recarga Okidata 9000 Espanhol
 
Manual de Recarga Minolta QMS 2400
Manual de Recarga Minolta QMS 2400Manual de Recarga Minolta QMS 2400
Manual de Recarga Minolta QMS 2400
 
Manual de Recarga Minolta 2300 DL
Manual de Recarga Minolta 2300 DLManual de Recarga Minolta 2300 DL
Manual de Recarga Minolta 2300 DL
 
Manual de Recarga Lexmark T640 | T642 | T644
Manual de Recarga Lexmark T640 | T642 | T644Manual de Recarga Lexmark T640 | T642 | T644
Manual de Recarga Lexmark T640 | T642 | T644
 
Manual de Recarga Lexmark T520 | T522
Manual de Recarga Lexmark T520 | T522Manual de Recarga Lexmark T520 | T522
Manual de Recarga Lexmark T520 | T522
 
Manual de Recarga Lexmark T430
Manual de Recarga Lexmark T430Manual de Recarga Lexmark T430
Manual de Recarga Lexmark T430
 

Kürzlich hochgeladen

Introduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptxIntroduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptxMatsuo Lab
 
UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7DianaGray10
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsSeth Reyes
 
AI You Can Trust - Ensuring Success with Data Integrity Webinar
AI You Can Trust - Ensuring Success with Data Integrity WebinarAI You Can Trust - Ensuring Success with Data Integrity Webinar
AI You Can Trust - Ensuring Success with Data Integrity WebinarPrecisely
 
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve DecarbonizationUsing IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve DecarbonizationIES VE
 
Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024SkyPlanner
 
COMPUTER 10: Lesson 7 - File Storage and Online Collaboration
COMPUTER 10: Lesson 7 - File Storage and Online CollaborationCOMPUTER 10: Lesson 7 - File Storage and Online Collaboration
COMPUTER 10: Lesson 7 - File Storage and Online Collaborationbruanjhuli
 
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdf
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdf
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdfJamie (Taka) Wang
 
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostKubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostMatt Ray
 
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...DianaGray10
 
VoIP Service and Marketing using Odoo and Asterisk PBX
VoIP Service and Marketing using Odoo and Asterisk PBXVoIP Service and Marketing using Odoo and Asterisk PBX
VoIP Service and Marketing using Odoo and Asterisk PBXTarek Kalaji
 
UiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPathCommunity
 
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UbiTrack UK
 
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdf
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdfIaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdf
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdfDaniel Santiago Silva Capera
 
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxCybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxGDSC PJATK
 
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAAnypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAshyamraj55
 
9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding Team9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding TeamAdam Moalla
 
Igniting Next Level Productivity with AI-Infused Data Integration Workflows
Igniting Next Level Productivity with AI-Infused Data Integration WorkflowsIgniting Next Level Productivity with AI-Infused Data Integration Workflows
Igniting Next Level Productivity with AI-Infused Data Integration WorkflowsSafe Software
 

Kürzlich hochgeladen (20)

Introduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptxIntroduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptx
 
UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7
 
201610817 - edge part1
201610817 - edge part1201610817 - edge part1
201610817 - edge part1
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and Hazards
 
AI You Can Trust - Ensuring Success with Data Integrity Webinar
AI You Can Trust - Ensuring Success with Data Integrity WebinarAI You Can Trust - Ensuring Success with Data Integrity Webinar
AI You Can Trust - Ensuring Success with Data Integrity Webinar
 
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve DecarbonizationUsing IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
 
Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024
 
COMPUTER 10: Lesson 7 - File Storage and Online Collaboration
COMPUTER 10: Lesson 7 - File Storage and Online CollaborationCOMPUTER 10: Lesson 7 - File Storage and Online Collaboration
COMPUTER 10: Lesson 7 - File Storage and Online Collaboration
 
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdf
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdf
activity_diagram_combine_v4_20190827.pdfactivity_diagram_combine_v4_20190827.pdf
 
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostKubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
 
20230104 - machine vision
20230104 - machine vision20230104 - machine vision
20230104 - machine vision
 
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
 
VoIP Service and Marketing using Odoo and Asterisk PBX
VoIP Service and Marketing using Odoo and Asterisk PBXVoIP Service and Marketing using Odoo and Asterisk PBX
VoIP Service and Marketing using Odoo and Asterisk PBX
 
UiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation Developers
 
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
 
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdf
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdfIaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdf
IaC & GitOps in a Nutshell - a FridayInANuthshell Episode.pdf
 
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxCybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptx
 
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAAnypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
 
9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding Team9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding Team
 
Igniting Next Level Productivity with AI-Infused Data Integration Workflows
Igniting Next Level Productivity with AI-Infused Data Integration WorkflowsIgniting Next Level Productivity with AI-Infused Data Integration Workflows
Igniting Next Level Productivity with AI-Infused Data Integration Workflows
 

Manual de Recarga Samsung 4725ELS | 4725F | 4725FN | SCX-4725

  • 1. SAMSUNG ® SCX 4725 CARTRIDGE REMANUFACTURING INSTRUCTIONS SAMSUNG SCX 4725 PRINTER SAMSUNG SCX 4725 TONER CARTRIDGE 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 2. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS REMANUFACTURING THE SAMSUNG SCX-4725 TONER CARTRIDGE By Mike Josiah First released in January 2008, the Samsung SCX-4725 multifunction printers are based on a 24ppm, 1200 x 1200 dpi engine. The cartridge is an all in one type that has a chip that must be replaced each cycle. Depending on the model, the machines are an MFP that can print, Copy, Scan (Color) and fax (SCX-4725FN only). These cartridges do not have a built in drum cover, but do come new with a plastic form fitting drum cover. For these cartridges Samsung has stopped using the heavy paper wrap. While we will not be going into the printing theory on this cartridge, it should be noted that the printer uses a Pre-Transfer Lamp (PTL). This lamp basically shines a light onto the OPC drum which lowers the charge on the drums surface and improves the transfer efficiency. Another interesting fact about these machines is that in addition to the normal Toner Low and Toner Empty messages there is also a “Drum Warning” message. This message first appears when a cartridge is near- ing 14,000 pages. The service manual states that after 15,000 pages, the waste hopper may overflow. The cartridge will shut down at this point regardless of the amount of toner left. The HY cartridges are rated for 3,000 pages so reaching that point is doubtful. Once toner empty state has been reached the cartridge will shut down so the only way for a cartridge to get that high a page count is if very little if any toner is used per page. The HY replacement cartridge is rated for 3,000 pages at 5% coverage (ISO 19752). The starter cartridge (SCX-4525FN) is rated for 1000 pages. The HY cartridge I have seen listed with two different part numbers. The Samsung web site shows it as SCX-D4725A/XAA, the Service manual lists the SCX-4725D3 number. From what I can find the SCX-D4725A is the correct number, but in case you come across the D3#, you know what it is. So far there are 2 machines in this series. The SCX-4725FN and the SCX-4725F. REQUIRED TOOLS • Toner approved vacuum • A small Common screw driver • A Phillips head screwdriver • Needle nose pliers REQUIRED SUPPLIES • Samsung SCX-4725 Toner 85g • Conductive Grease • Drum lubricating powder 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 3. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 1. Place the cartridge with the handle facing away from you. 2. Gently pry off the left end cap. Remove the 2 screws on the left end cap. 3. In the front edge of the cartridge, there are two screws, 4. Lift up and remove the waste chamber from the cartridge. remove them. Make sure the tabs on the left and right sides slide out of the slot. If you try to lift the cover off with out sliding the tab out, they will break off. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 4. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 5. Remove the two screws and wiper blade from the waste chamber. Clean out any remaining toner from the waste chamber. 6. Re-install the wiper blade and two screws. Place the waste 7. Remove the two screws from the right side end cap. chamber aside. Carefully pry off the end cap. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 5. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 8. Remove the 4 gears, and place aside. 9. Slide the PCR away from the contact side, lift up and remove. Clean the PCR with your normal PCR cleaner. WARNING: Do not clean the OEM PCR with alcohol, as this will remove the conductive coating from the roller. If the PCR is an aftermarket, follow the cleaning methods recommended by the manufacturer. If the PCR is an OEM, we recommend it be cleaned with your standard PCR cleaner 10. Remove the OPC drum. 11. Carefully pry out the fill plug. It fits tight and is easily dam- aged. Work a small jeweler’s screwdriver around the edge until the plug comes free. Clean out any remaining toner from the hopper. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 6. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 12. Gently pry out the roller plate from the cartridge by pressing in on a tab located on the bottom of the cartridge. There is a spring that is in contact with the developer roller shaft. Move the tail of the spring up so that as the plate is lifted out, it will fall behind it. 13. Remove the Developer Roller by lifting it out. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 7. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 14. Remove the 2 screws on the doctor blade. On the fill plug side of the blade, there is the other tail of the spring. Lift it up while removing the doctor blade so it is not damaged. It is highly recommended that the Doctor Blade be cleaned. Failure to do so will cause streaking. Dampen a cotton swab with alcohol, and clean the blade. Be careful not to press too hard and damage the blade. If the blade has a heavy buildup of toner on it, clean it with Acetone, and then alcohol. 15. Clean the feed roller and any remaining toner from the hopper. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 8. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 16. Re-install the doctor blade and two screws. Make sure the tail of the spring fits into the proper slot. 17. Install the developer roller, keyed end to the gear side of the cartridge. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 9. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 18. Install the roller plate. Route the tail of the spring so that it sits on top of the plate and is in contact with the shaft of the devel- oper roller. Lock the plate in place with the tab. 19. Install the 4 gears as shown. 20. Install the drum in place. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 10. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 21. Clean out the old conductive grease from the PCR contact 22. Install the PCR by sliding it through the non contact side, hub and replace with new. A small amount of grease is fine, and into the contact hub. more is not better when it comes to conductive grease. 23. Fill the hopper with the appropriate toner. Replace the fill 24. Install the gear side end cap, and 2 screws. Make sure the plug, check for leaks. PCR fits correctly in its holder, and all the gears are aligned. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 11. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 25. Install the waste chamber by sliding the tab through the slot in the end cap. Rotate it down, and install the two screws. 26. On the Non-gear end cap, the chip needs to be replaced before it is installed back on the cartridge. There are 2 tabs that lock the chip housing in. Carefully pry up the two tabs. Remove and replace the chip. Snap the chip housing back in place. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
  • 12. SAMSUNG SCX 4725 • CARTRIDGE REMANUFACTURING INSTRUCTIONS 27. Install the non-gear end cap and two screws. Make sure the end cap sits flush with the rest of the cartridge. PRINTING TEST PAGES As these machines are also copiers, a simply copy of a good test page should be all you need. RUNNING THE DRUM CLEANING PAGE 1. Press the “Menu” button until MAINTENANCE appears on the display. 2. Press “Enter” 3. Press the “Left” or “Right” arrows until CLEAN DRUM appears on the Display 4. Press “Enter” 5. Press the “Left” or “Right” arrows until YES appears on the Display 6. Press “Enter” REPETITIVE DEFECT CHART OPC Drum 75.5mm Lower Fuser Roller 75.4mm Upper fuser roller 63.9mm Supply Roller 47.5mm Transfer roller 46.2mm PCR 37.7mm Developer Roller 35.2mm MACHINE ERROR CODES These machines use plain English error messages so there is no need to go into them here. 3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com © 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.