Practicality is a reason to buy a 16 channel digital video recorder online. These digital video recorders are not the least of the things you can buy from the internet considering you can buy a 16 channel DVR without even leaving your home. You can save a lot of time and money buying a digital video recorder. Check out http://www.supercircuits.com/digital-video-recorders/16-channel-dvrs.
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
How to install a 16 channel digital video recorder
1. How To Install A 16 Channel Digital Video Recorder
If you have just bought a 16 channel digital video recorder, I congratulate you on the
decision. Using digital video recorders and specifically a 16 channel DVR is a great way
to keep an eye on your business. It's a very powerful piece of surveillance equipment,
one that you can use to ensure the safety of you and your employees. Now let's go
about setting up the DVR! I should stress though that the installation of a DVR may vary
based on the DVR. However, this is a rough guide as to how to install the 16 channel
digital video recorder. Also, before we begin, make sure that the system is turned off.
When installing the digital video recorder, you should first install the security cameras.
Look around and determine the best locations for these cameras. For a business,
common areas would include the front and back door. Cash registers, cooking areas,
dining areas, and even a parking lot or a drive through are also other locations in a
business that should be covered by a security camera. Crime can potentially happen
anywhere, so it's important to install security cameras in some of the most obvious
places.
Once you install the security cameras, you need to connect the cameras back to the
main digital video recorder which will ideally be located in a back room. Most digital
video recorders should have an area of plugs on the back of the digital video recorder.
This is where the cameras will plug into. You may find that the camera slots are
numbered, which will make it that much easier in plugging in the cameras.
After plugging the cameras in, the next step will be to connect your DVR to your
network. The most common form of a network connection is Ethernet, so you will likely
be using an Ethernet connection for your DVR. If you have a router, you will plug your
DVR straight into the router. Connecting your DVR to your network will give you the
ability to monitor the cameras at a remote location.
Finally, plug your DVR into a power outlet. This will give your system power, and you
will be able to turn on your DVR and begin using it to secure your business. Should your
system fail to turn on, you can begin troubleshooting the installation process. Determine
that all of the plugs are secure. Also, take a close look at the DVR to ensure that
everything is plugged into the proper outlet. The installation is fairly easy, but a common
mistake is to plug a camera into the wrong outlet. So if you have any trouble, that is a
good place to start. Good luck!