This slideshow was put together for a lecture at the University of MInnesota. It talks about PH for new construction and Deep Energy Reduction Retrofit projects.
The slideshow contains a lot of full-screen images but no subtitles, therefore omitting some of the information which would have been given verbally during the presentation.
1. Certified Passive House™ and the related Logo is a certification mark owned by the Passive House Institute US | PHIUS and is used by permission.
2. Passive House
An introduction by Tim Eian,
Certified Passive House Consultant
Certified Passive House™ and the related Logo is a certification mark owned by the Passive House Institute US | PHIUS and is used by permission.
12. First Passive House & PHI
1990
1996: PHI - Passiv Haus Institut
Source: Passiv Haus Institut
13. “Passivhaus”
Passive House
Building Energy Standard
A rigorous, voluntary building energy standard
focusing on highest energy efficiency and quality of life
at low operating cost.
15. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
16. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
17. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
18. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
19. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
20. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
21. Passive Solar design vs.
Passive House standard
PASSIVE SOLAR PASSIVE HOUSE
Building design concept Certified building energy standard
“Unlimited” energy use Limited energy use per square foot and year
Utilization of solar heat gains and internal heat
Utilization of solar heat gains (passive)
gains (passive)
Utilization of shading devices to control solar Utilizes shading devices and glazing to control
heat gains solar heat gains
Use of thermal mass for absorption and storage Use of superinsulation for retention of space
of solar energy conditioning energy
Use of thermal mass for time-release of space
Use of ventilation system for distribution and
conditioning energy (passive convection/radiation
recovery of heating energy
or active distribution with mechanical system)
25. Active vs. Passive
“Active” Heating “Passive” System with
System 10 kW+ small post heater 1 kW
85 - 400 max. 15
kWh/m2 kWh/m2
Building Stock Passive House
Source: Krapmeier & Drössler 2001
26. Economy
Capitalized costs in Euro
Elimination of traditional heating system
Ultra low-energy building
Low-energy building
Passive House
Space-Conditioning Energy in kWh/(m2 a)
“Gas-Mileage for Buildings”
Source: Krapmeier & Drössler 2001
28. Energy
90%+ reduction in space-conditioning energy consumption*
75%+ reduction in source-energy consumption*
Source: Krapmeier & Drössler 2001 *) compared to standard-practice code-compliant construction
70. Energy Goals
NET ZERO SITE ENERGY (ZEB U.S.), desirable minimum level
Energy produced on site = energy consumed on site
Grid-tied building
71. Energy Goals
OFF-THE-GRID, expensive
Energy produced on site = energy consumed on site
Building is not tied to the grid
72. Energy Goals
NET ZERO UTILITY BILL, sales-pitch level
$-value of energy sold = $-value of energy purchased
73. Energy Goals
NET ZERO SOURCE ENERGY, true zero energy level
Energy produced on site = energy consumed at provider including energy
content of raw materials, conversion and distribution
74. Energy Goals
NET POSITIVE ENERGY (NPE):
Energy produced on site > energy consumed on site
75. Energy Goals
NET ZERO ENERGY EMISSIONS (ZEB ouside U.S.), sustainability level:
CO2 offset on site ≥ CO2 generated in source energy production at
provider to deliver site energy
76. Energy Goals
SAVE-THE-PLANET LEVEL
Net Zero Energy Emissions + Net Positive Energy
81. Predictable Outcome &
Quality Control
Passive House Planning Package
(PHPP)
• An Excel-based steady-state
energy design program
82. Predictable Outcome &
Quality Control
Passive House Planning Package
(PHPP)
• An Excel-based steady-state
energy design program
• Extremely detailed
83. Predictable Outcome &
Quality Control
Passive House Planning Package
(PHPP)
• An Excel-based steady-state
energy design program
• Extremely detailed
• Calculations are transparent
and customizable
84. Predictable Outcome &
Quality Control
Passive House Planning Package
(PHPP)
• An Excel-based steady-state
energy design program
• Extremely detailed
• Calculations are transparent
and customizable
• Field testing
85. Predictable Outcome &
Quality Control
Passive House Planning Package
(PHPP)
• An Excel-based steady-state
energy design program
• Extremely detailed
• Calculations are transparent
and customizable
• Field testing
• Site supervision by Passive
House Consultant
88. Think globally,
Build locally.
Passive House Standard performance requirements are
always the same, no matter where the building is built.
89. Think globally,
Build locally.
Passive House Standard performance requirements are
always the same, no matter where the building is built.
Climate zone and a building’s distinctive location
impact the design significantly.
90. Think globally,
Build locally.
Passive House Standard performance requirements are
always the same, no matter where the building is built.
Climate zone and a building’s distinctive location
impact the design significantly.
Therefore, Passive Houses will look differently
depending on where they are located.
93. Retrofits
Yes, we can!
> Deep Energy Reduction Retrofits: DERR
94. Retrofits
Yes, we can!
> Deep Energy Reduction Retrofits: DERR
70%+ reduction of site energy consumption
95. Retrofits
Yes, we can!
> Deep Energy Reduction Retrofits: DERR
70%+ reduction of site energy consumption
Significant CO2 reduction
96. Retrofits
Yes, we can!
> Deep Energy Reduction Retrofits: DERR
70%+ reduction of site energy consumption
Significant CO2 reduction
Tremendous nation-wide energy-savings
potential for existing building stock
97. Retrofits
Yes, we can!
> Deep Energy Reduction Retrofits: DERR
70%+ reduction of site energy consumption
Significant CO2 reduction
Tremendous nation-wide energy-savings
potential for existing building stock
We can overcome energy obsolescence!
100. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
101. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
102. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
103. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
104. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
105. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
• Add (exterior) insulation package
106. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
• Add (exterior) insulation package
• Install new doors and windows
107. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
• Add (exterior) insulation package
• Install new doors and windows
• Add heat-recovery ventilation system
108. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
• Add (exterior) insulation package
• Install new doors and windows
• Add heat-recovery ventilation system
• Adequately size mechanical system
109. DERR - In a nutshell
• Assess viability of existing building and level of existing
obsolescence (energy, siding, roofing, windows, etc.)
• Set energy goals (typ. 70%+ improvement over existing
condition)
• Assess moisture transfer through shell and design
assemblies that will be air-tight but diffusion open
• Demo and prepare existing building
• Establish air-tightness layer
• Add (exterior) insulation package
• Install new doors and windows
• Add heat-recovery ventilation system
• Adequately size mechanical system
• Add renewable energy package as desired
111. TE Studio & Passive House
Building design for new construction, remodels, additions
Energy optimizations, building analysis, consulting
112. beautiful, resource-efficient building design
Tim Eian, assoc. AIA
Certified Passive House Consultant
TE Studio, Ltd.
3429 Benjamin St. NE
Minneapolis, MN 55418
www.timeian.com
612-246-4670
tim@timeian.com
Blog: www.timeian.com/blog
Certified Passive House™ and the related Logo is a certification mark owned by the Passive House Institute US | PHIUS and is used by permission.
Thanks for inviting me to talk about Passive House Design Standard.
Thank people for coming
Excited to be here and talk about Passive House
Quick background on my person:
- German, lived here 7 years, family and house, worked with local firm for 6.5 years, have always been fascinated with architecture and how things work. Architectural degree more technical in Germany (engineer’s title), have had a fascination with efficient approaches to design.
This talk: 2 sections (1) general benefits, (2) key summary of how to do it
Thanks for inviting me to talk about Passive House Design Standard.
Thank people for coming
Excited to be here and talk about Passive House
Quick background on my person:
- German, lived here 7 years, family and house, worked with local firm for 6.5 years, have always been fascinated with architecture and how things work. Architectural degree more technical in Germany (engineer’s title), have had a fascination with efficient approaches to design.
This talk: 2 sections (1) general benefits, (2) key summary of how to do it
Thanks for inviting me to talk about Passive House Design Standard.
Thank people for coming
Excited to be here and talk about Passive House
Quick background on my person:
- German, lived here 7 years, family and house, worked with local firm for 6.5 years, have always been fascinated with architecture and how things work. Architectural degree more technical in Germany (engineer’s title), have had a fascination with efficient approaches to design.
This talk: 2 sections (1) general benefits, (2) key summary of how to do it
Conservation became a resource!
Wayne Schick’s Team at The Small Homes Council @ the University of Illinois, Urbana-Champaign develops the Lo-Cal House in 1974-76
Walls: Double stud R-30, Roof: R-40
Were built, still in operation
We’ll get back to Urbana, Illinois later in the presentation
1973, energy crisis spurred first wave of energy conserving designs
Those dealing with buildings started to look at superinsulation, passive solar design concepts, and active solar systems.
Smart, integrated design.
Why solar? If we harness 0.02% of the sun’s energy that hits the earth, we can eliminate all fossil and nuclear fuels.
We are now seeing articles like this again in newspapers! People are starting to notice that conservation is a resource to reckon with.
The term \"superinsulation\" was coined by Wayne Schick at the University of Illinois at Urbana-Champaign. In 1976 he was part of a team that developed a design called the \"Lo-Cal\" house, using computer simulations based on the climate of Madison, Wisconsin.
In 1978 the \"Saskatchewan House\" was built in Regina, Saskatchewan by a group of several Canadian government agencies. It was the first house to publicly demonstrate the value of superinsulation and generated a lot of attention. It originally included some experimental evacuated-tube solar panels, but they were not needed and were later removed.
In 1979 the \"Leger House\" was built by Eugene Leger, in East Pepperell, Massachusetts. It had a more conventional appearance than the \"Saskatchewan House\", and also received extensive publicity.
Publicity from the \"Saskatchewan House\" and the \"Leger House\" influenced other builders, and many superinsulated houses were built over the next few years, but interest declined as energy prices fell. Many US builders now use more insulation than will fit in a traditional 2x4 stud wall (either using 2x6 studs or by adding rigid foam to the outside of the wall), but few would qualify as \"superinsulated\".
There is no set definition of superinsulation, but superinsulated buildings typically include:
▪Very thick insulation (typically R40 walls and R60 roof)
▪Detailed insulation where walls meet roofs, foundations, and other walls
▪Airtight construction, especially around doors and windows
▪a heat recovery ventilator to provide fresh air
▪No large windows facing any particular direction (unlike passive solar, which uses large windows facing the sun and fewer/smaller windows facing other directions).
▪No large amounts of thermal mass
▪No active or passive solar heat (but may have solar water heating and/or hot water heat recycling)
▪No conventional heating system, just a small backup heater
Nisson & Dutt (1985) suggest that a house might be described as \"superinsulated\" if the cost of space heating is lower than the cost of water heating.
First superinsulated house that showed that airtight construction is feasible. It is equipped with a ventilation system with an air-to-air heat exchanger.
Peak heat load at -10 degrees Fahrenheit is 3000 watts (10,640 Btu per hour)
Walls: 12” thick, R-44 Roof: R-60
There is no set definition of superinsulation, but superinsulated buildings typically include:
▪Very thick insulation (typically R40 walls and R60 roof)
▪Detailed insulation where walls meet roofs, foundations, and other walls
▪Airtight construction, especially around doors and windows
▪a heat recovery ventilator to provide fresh air
▪No large windows facing any particular direction (unlike passive solar, which uses large windows facing the sun and fewer/smaller windows facing other directions).
▪No large amounts of thermal mass
▪No active or passive solar heat (but may have solar water heating and/or hot water heat recycling)
▪No conventional heating system, just a small backup heater
Nisson & Dutt (1985) suggest that a house might be described as \"superinsulated\" if the cost of space heating is lower than the cost of water heating.
Why don’t we have those buildings everywhere today?
Problem: materials and products were not up to the task, yet (small issue)
Mid-1980s, energy became cheaper again (big issue)
No political mandate for energy-conservation measures (big issue)
Some energy codes had been released. Most consumers felt that energy-code would take care of the issue—failed to notice that it did not.
So we stopped making energy efficient houses almost entirely.
We added vinyl siding to a passive solar house from the mid-70s, and we forgot how it worked. Everybody who knew how to operate it, left. The people who own it now don’t know anything about it.
Some buildings have been retrofit by taking the passive solar off and and adding traditional heating systems.
Slowly the issue went away. Only few people continued to work on efficiency.
The rest of the country focused on growth. Average new house grew from 1,660sf (1974) to 2,521SF (2007) +51%
median is even at 2277 in 2007
Bigger house, not better house!
We added vinyl siding to a passive solar house from the mid-70s, and we forgot how it worked. Everybody who knew how to operate it, left. The people who own it now don’t know anything about it.
Some buildings have been retrofit by taking the passive solar off and and adding traditional heating systems.
Slowly the issue went away. Only few people continued to work on efficiency.
The rest of the country focused on growth. Average new house grew from 1,660sf (1974) to 2,521SF (2007) +51%
median is even at 2277 in 2007
Bigger house, not better house!
The Passive House standard originated from a conversation in May 1988 between Professors Bo Adamson of Lund University, Sweden, and Wolfgang Feist of the Institut für Wohnen und Umwelt Institute for Housing and the Environment in Germany
Inspired by early work in the US
Started with research projects
Created Passive House Standard
Inspiration: early work in the U.S.!Their concept was developed through a number of research projects [8], aided by financial assistance from the German state of Hessen. The eventual building of four row houses (terraced houses) was designed for four private clients by architects professor Bott, Ridder and Westermeyer.
After the concept had been validated at Darmstadt, with space heating 90% less than required for a standard new building of the time, the 'Economical Passive Houses Working Group' was created in 1996. This developed the planning package and initiated the production of the novel components that had been used, notably the windows and the high-efficiency ventilation systems. Meanwhile further passive houses were built in Stuttgart (1993), Naumburg, Hesse, Wiesbaden, and Cologne (1997) [9].
The products developed for the Passivhaus were further commercialised during and following the European Union sponsored CEPHEUS project, which proved the concept in 5 European countries over the winter of 2000-2001.
While some techniques and technologies were specifically developed for the standard, others (such as superinsulation) were already in existence, and the concept of passive solar building design dates back to antiquity. There was also experience from other low-energy building standards, notably the German Niedrigenergiehaus (low-energy house) standard, as well as from buildings constructed to the demanding energy codes of Sweden and Denmark.
What does it look like?
The first Passivhaus buildings were built in Darmstadt, Germany, in 1990, and occupied the following year.
Who is in charge of Passive House standard?
In September 1996 the Passivhaus-Institut was founded in Darmstadt to promote and control the standard.
In November 2007, launch of the Passive House Institute US
The standard is not exclusive to residential construction. Passive House design is NOT an add-on or supplement to architectural design, but an integrated design process with the architectural design.[3] Although it is mostly applied to new buildings, it has also been used for retrofits.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Have we not seen this before?
Better known in the U.S.: Passive Solar Design. (Talk about differences in table)
Summary: Passive House Design utilizes Passive Solar Design principles but takes it to a higher level, by adding more strategies to retain energy, utilize internal heat gains, and energy recovery to create an energy balance. It is a certified building standard—not just concept.
Passive solar design
Following passive solar building design techniques, where possible buildings are compact in shape to reduce their surface area, with windows oriented towards the equator (south in the northern hemisphere and north in the southern hemisphere) to maximize passive solar gain. However, the use of solar gain is secondary to minimizing the overall energy requirements.
Passive houses can be constructed from dense or lightweight materials, but some internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible over-heating in spring or autumn before normal solar shading becomes effective.
Traditionally, add as much energy as it takes to heat or cool
BTW, that is a very common approach in most industries today - if we need to change a state of an object or environmental parameters, we usually do that by utilizing more energy to do so.
Example: Air Conditioning: On hottest day with most solar energy, we use a lot of electricity (from mostly coal) to cool houses (instead of shading properly, and harnessing the sun’s energy)
Traditionally, add as much energy as it takes to heat or cool
BTW, that is a very common approach in most industries today - if we need to change a state of an object or environmental parameters, we usually do that by utilizing more energy to do so.
Example: Air Conditioning: On hottest day with most solar energy, we use a lot of electricity (from mostly coal) to cool houses (instead of shading properly, and harnessing the sun’s energy)
Due to the dramatic reduction in space-conditioning energy needs, it is referred to as a passive house,
as opposed to utilizing active measures to keep it conditioned.
The difference being mainly in the energy amount that utilized and the fact, that passive house utilizes mostly solar and internal heat gains (passive energy sources).
Economy: Significant conservation and improved performance = cost savings to the owner
90%+ savings on space-conditioning energy, 75%+ savings on source energy (pending household use pattern)> highly reduced utility cost
Federal tax credits, local utility company incentives (as applicable)
Potentially reduced homeowner’s insurance (due to reduced mechanical system and quality construction)
Benefits of energy efficiency mortgage
Cost asymptote occurs when a traditional heating system is eliminated
Energy: Significant conservation and highly efficient operation
Significantly less energy consumption
Can be “fueled” by virtually any power source (future proof), Easier to “fuel” with renewable energy sources, cheaper to outfit with appropriately sized renewable energy sources, Crisis proof
Renewables are smaller, hence more affordable. Zero site, or source energy, carbon neutrality, deep energy retrofit
Environment: Significant conservation and improved performance = significantly reduced environmental impact
Up to 75% savings on source energy = smaller CO
2
footprint: Carbon-neutrality truly in reach. Don’t need a football field of PV panels
Likely in use longer and maintained longer than average building, Less likely to need retrofit, reduction in energy used for construction and materials
Health: Improved indoor environmental quality = improved health
Guaranteed mechanical air-exchange 24/7—365 days a year, Tempered air (heat recovery ventilation), Controlled humidity, Slow and steady air movement (quiet and without drafts)
Indoor surfaces are near room temperatur, virtually no radiant heat-loss potential
Improved daylighting and solar exposure
Studies show less potential for asthma, allergies, sickness
Significantly reduced exposure to CO, pollutants, VOCs. Virtually no potential for mold, no radiant heat loss, healthy humidity levels, little to no noise pollution
Comfort: Superinsulated building envelope = high level of comfort
Indoor surfaces are near room-temperatur, virtually no radiant heat-loss potential
Improved indoor environmental quality
Extremely quiet inside due to superinsulation and high-performance windows
very high (virtually no radiant heat loss, healthy humidity, fresh air, etc.)
Durability: High quality planning and construction = extremely durable building
Energy modeling, quality-controlled construction, field testing > predictable results
Advanced window technology, longevity
Reduced mechanical system, less moving parts = less maintenance
Owner training, “understand your building”, Owner’s manual, “pass on the knowledge”
Certified building standard
Conscience: Most efficient building energy standard available today = clear conscience
Value: Best building energy standard available = incredible value
Quality building, durability
High performance building envelope
Fully documented and certified
Best starting point for an uncertain energy future
sells up to 25% quicker, yields up to 10% more
How exactly does it work?
Talk about heating-dominated climate, explain heat retention is most important (keeps heat out, too)
How exactly does it work?
Talk about heating-dominated climate, explain heat retention is most important (keeps heat out, too)
How exactly does it work?
Talk about heating-dominated climate, explain heat retention is most important (keeps heat out, too)
How exactly does it work?
Talk about heating-dominated climate, explain heat retention is most important (keeps heat out, too)
How exactly does it work?
Talk about heating-dominated climate, explain heat retention is most important (keeps heat out, too)
Minimize losses, maximize gains. Energy Balance!
A building is already warm inside going from summer into fall and winter. Passive House minimizes heat loss through insulation, windows & doors, and heat-recovery ventilation therefore retaining space-conditioning energy very effectively. Passive House utilizes passive solar heat gains through windows. Passive House utilizes internal heat gains from people and appliances. Additional heat comes from a tiny backup system for peak heat-load
PH is an integrated system - all components work in concert. It is not a “bolt-on solution” but it can incorporate bolt-on measures. WHOLE IS GREATER THAN SUM OF PARTS.
Traditionally, add as much energy as it takes to heat or cool. (BTW, that is a very common approach in most industries today - if we need to change a state of an object or environmental parameters, we usually do that by utilizing more energy to do so). Example: Air Conditioning: On hottest day with most solar energy, we use a lot of electricity (from mostly coal) to cool houses (instead of shading properly, and harnessing the sun’s energy)
R-21 to R120+ (pending location)
thermally broken windows, all connections designed thermal-bridge free
2 to 4-pane windows*, high solar heat gain
solid or thermally broken frames*
field tested with a sequence of three test, pressurized and depressurized
impecable, continuous solid air-tight layer (i.e. OSB), thorough detailing, precise execution
max. 0.6 ACH. Air-admittance valve.
Heart of the mechanical system, provides most of the energy (up to 10W/m2), 90%+ efficient, balanced and duct-blasted, short duct runs, insulated ducts
Other mechanical systems: insulated pipes, central location, air admittance valves, energy and water saving appliances, potentially renewable sources
Proper orientation, solar exposure, proper summer and swing season shading, high solar heat gain glazing on south side.
Near southern orientation, built-in shading
people, appliances, equipment
How do we measure the success?
In Germany, we look at gas-mileage for homes. Instead of MPGs, we measure in kWh/m2 a or Btu/sf year
≤ 15 kWh/(m2 a)
U.S. housing stock ~175 kWh/(m2 a) or 58,580 BTU/(sf yr) up to 90% + improvement
determined in PHPP
Achieved with the help of: Superinsulated Building Envelope, very good windows and doors, air-tight and thermal bridge-free construction, passive solar heat gains, internal heat gains, and an very efficient backup heating system
≤ 120 kWh/(m2 a)
up to 75% + improvement
determined in PHPP
Achieved through conservation in both passive and active systems
How do we measure the success?
In Germany, we look at gas-mileage for homes. Instead of MPGs, we measure in kWh/m2 a or Btu/sf year
In U.S. we currently use a comparative model: HERS
Problem: nobody really knows what the basis is and buildings are compared on a point basis. Nowhere does it directly relate back to energy.
Limited use, but realtor associations are looking to use it for a “green” realty label, MN starting 2009. HERS is determined by HERS rater.
HERS (Home Energy Rating System), controversial and not absolute- uses comparison not actual energy modeling or monitoring
Ratings provides a relative energy use index called the HERS Index – a HERS Index of 100 represents the energy use of the “American Standard Building” and an Index of 0 (zero) indicates that the Proposed Building uses no net purchased energy (a Zero Energy Building). Zero Site energy, nor really a zero energy building though.
What is a HERS Rating?
A home energy rating involves an analysis of a home’s construction plans and onsite inspections. Based on the home’s plans, the Home Energy Rater uses an energy efficiency software package to perform an energy analysis of the home’s design. This analysis yields a projected, pre-construction HERS Index. Upon completion of the plan review, the rater will work with the builder to identify the energy efficiency improvements needed to ensure the house will meet ENERGY STAR performance guidelines. The rater then conducts onsite inspections, typically including a blower door test (to test the leakiness of the house) and a duct test (to test the leakiness of the ducts). Results of these tests, along with inputs derived from the plan review, are used to generate the HERS Index score for the home.
The HERS Index
The HERS Index is a scoring system established by the Residential Energy Services Network (RESNET) in which a home built to the specifications of the HERS Reference Home (based on the 2006 International Energy Conservation Code) scores a HERS Index of 100, while a net zero energy home scores a HERS Index of 0. The lower a home’s HERS Index, the more energy efficient it is in comparison to the HERS Reference Home.
Each 1-point decrease in the HERS Index corresponds to a 1% reduction in energy consumption compared to the HERS Reference Home. Thus a home with a HERS Index of 85 is 15% more energy efficient than the HERS Reference Home and a home with a HERS Index of 80 is 20% more energy efficient.
For more information, visit the RESNET Web site .
Comparing the New HERS Index with the Old HERS Score
For homes rated before July 1, 2006, the rating score is known as a “HERS Score.” The HERS Score is a system in which a home built to the specifications of the HERS Reference Home (based on the 1993 Model Energy Code) has a HERS Score of 80. Unlike the HERS Index, each 1-point increase in a HERS Score is equivalent to a 5% increase in energy efficiency. Please see the table below for a comparison of the HERS Score and the HERS Index.
How do we measure the success?
In Germany, we look at gas-mileage for homes. Instead of MPGs, we measure in kWh/m2 a or Btu/sf year
In U.S. we currently use a comparative model: HERS
Problem: nobody really knows what the basis is and buildings are compared on a point basis. Nowhere does it directly relate back to energy.
Limited use, but realtor associations are looking to use it for a “green” realty label, MN starting 2009. HERS is determined by HERS rater.
HERS (Home Energy Rating System), controversial and not absolute- uses comparison not actual energy modeling or monitoring
Ratings provides a relative energy use index called the HERS Index – a HERS Index of 100 represents the energy use of the “American Standard Building” and an Index of 0 (zero) indicates that the Proposed Building uses no net purchased energy (a Zero Energy Building). Zero Site energy, nor really a zero energy building though.
What is a HERS Rating?
A home energy rating involves an analysis of a home’s construction plans and onsite inspections. Based on the home’s plans, the Home Energy Rater uses an energy efficiency software package to perform an energy analysis of the home’s design. This analysis yields a projected, pre-construction HERS Index. Upon completion of the plan review, the rater will work with the builder to identify the energy efficiency improvements needed to ensure the house will meet ENERGY STAR performance guidelines. The rater then conducts onsite inspections, typically including a blower door test (to test the leakiness of the house) and a duct test (to test the leakiness of the ducts). Results of these tests, along with inputs derived from the plan review, are used to generate the HERS Index score for the home.
The HERS Index
The HERS Index is a scoring system established by the Residential Energy Services Network (RESNET) in which a home built to the specifications of the HERS Reference Home (based on the 2006 International Energy Conservation Code) scores a HERS Index of 100, while a net zero energy home scores a HERS Index of 0. The lower a home’s HERS Index, the more energy efficient it is in comparison to the HERS Reference Home.
Each 1-point decrease in the HERS Index corresponds to a 1% reduction in energy consumption compared to the HERS Reference Home. Thus a home with a HERS Index of 85 is 15% more energy efficient than the HERS Reference Home and a home with a HERS Index of 80 is 20% more energy efficient.
For more information, visit the RESNET Web site .
Comparing the New HERS Index with the Old HERS Score
For homes rated before July 1, 2006, the rating score is known as a “HERS Score.” The HERS Score is a system in which a home built to the specifications of the HERS Reference Home (based on the 1993 Model Energy Code) has a HERS Score of 80. Unlike the HERS Index, each 1-point increase in a HERS Score is equivalent to a 5% increase in energy efficiency. Please see the table below for a comparison of the HERS Score and the HERS Index.
How do we measure the success?
In Germany, we look at gas-mileage for homes. Instead of MPGs, we measure in kWh/m2 a or Btu/sf year
In U.S. we currently use a comparative model: HERS
Problem: nobody really knows what the basis is and buildings are compared on a point basis. Nowhere does it directly relate back to energy.
Limited use, but realtor associations are looking to use it for a “green” realty label, MN starting 2009. HERS is determined by HERS rater.
HERS (Home Energy Rating System), controversial and not absolute- uses comparison not actual energy modeling or monitoring
Ratings provides a relative energy use index called the HERS Index – a HERS Index of 100 represents the energy use of the “American Standard Building” and an Index of 0 (zero) indicates that the Proposed Building uses no net purchased energy (a Zero Energy Building). Zero Site energy, nor really a zero energy building though.
What is a HERS Rating?
A home energy rating involves an analysis of a home’s construction plans and onsite inspections. Based on the home’s plans, the Home Energy Rater uses an energy efficiency software package to perform an energy analysis of the home’s design. This analysis yields a projected, pre-construction HERS Index. Upon completion of the plan review, the rater will work with the builder to identify the energy efficiency improvements needed to ensure the house will meet ENERGY STAR performance guidelines. The rater then conducts onsite inspections, typically including a blower door test (to test the leakiness of the house) and a duct test (to test the leakiness of the ducts). Results of these tests, along with inputs derived from the plan review, are used to generate the HERS Index score for the home.
The HERS Index
The HERS Index is a scoring system established by the Residential Energy Services Network (RESNET) in which a home built to the specifications of the HERS Reference Home (based on the 2006 International Energy Conservation Code) scores a HERS Index of 100, while a net zero energy home scores a HERS Index of 0. The lower a home’s HERS Index, the more energy efficient it is in comparison to the HERS Reference Home.
Each 1-point decrease in the HERS Index corresponds to a 1% reduction in energy consumption compared to the HERS Reference Home. Thus a home with a HERS Index of 85 is 15% more energy efficient than the HERS Reference Home and a home with a HERS Index of 80 is 20% more energy efficient.
For more information, visit the RESNET Web site .
Comparing the New HERS Index with the Old HERS Score
For homes rated before July 1, 2006, the rating score is known as a “HERS Score.” The HERS Score is a system in which a home built to the specifications of the HERS Reference Home (based on the 1993 Model Energy Code) has a HERS Score of 80. Unlike the HERS Index, each 1-point increase in a HERS Score is equivalent to a 5% increase in energy efficiency. Please see the table below for a comparison of the HERS Score and the HERS Index.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
OUTLOOK AND POTENTIAL
Bringing it back to the issue of climate change, energy independence, affordability (utility bill).
There is not a better starting point than Passive House - it requires the least amount of energy, it is the easiest building type to get to any of the aforementioned states.
Goals should be set upfront with homeowner.
Don’t need them, optional.
Solar hot water is great way to go.
Climate and site play a role. PV can help offset energy: site, source, cost, CO2 neutral
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
How do we guarantee the result?
- Contractor training
- Extremely detailed design drawings
Let’s talk more about details of Passive House Design.
A house build to current energy code in Minnesota could potentially qualify as a Passive House in California.
Let’s talk more about details of Passive House Design.
A house build to current energy code in Minnesota could potentially qualify as a Passive House in California.
Let’s talk more about details of Passive House Design.
A house build to current energy code in Minnesota could potentially qualify as a Passive House in California.
First Passive House in urban setting. First in Twin Cities. Affordable Housing. 3112 6th St. N, Eco Village, Hawthorne, North Minneapolis
PH design lends itself well to affordable housing:
- low and predictable operating cost
- high survivability (doesn’t cool off)
- empowerment through design (don’t just give people anything, give them something really good)
Thank MinneAppleseed for their support of Passive House design. Enjoying that process much of bringing hope to a community that is lacking attention, resources, opportunity.
Member Architecture Institute of America, Passive House Consultant, Adopter Architecture 2030 Challenge, Member USGBC (LEED),