1. How to program the time on your Sony alarm clock Fatima Hardy Professor Canning Fit 1000 9/19/09
2. What time is it? Before you can program your alarm clock you have to know what time it is. First step is to look at your watch cell phone, any thing that has the time on it so you can know what time it is. Then look at the top of you’re alarm clock it should have a buttons that say Time Hour Minutes Alarm snooze
3. Lets get started In order to set the time you must press down on the button that says time and the button that says hour at the same time. Then press down the hour button until you get the right hour. If you pass the number you wanted press down again until you see it a again. To make sure you have the hour on Am or Pm look at the screen and a green dot will be next to either Am or Pm.
4. Setting the minutes To set the minutes you must press down the button that says time and the button that says minutes. Continue to press down the minute button. To make sure you have the right time press your minute button one minute a head of time. Just incase the time changes right after you set your time.
5. Ring the alarm To set your alarm time on your alarm clock just repeat the steps as programming the time Instead of pressing the button press the alarm button. To make sure you have your alarm on move the switch on top of the alarm clock It should move from left to right and say off and on Move it to the right where it will say on The screen will show a red light that means the alarm is on
