Emtelle Fibre Optic Cables - Product Catalogue 2016

Emtelle Fibre Optic Cables
Catalogue 2016

EMTELLE FIBRE OPTIC CABLES
2 ENGAGE.LISTEN.INNOVATE.DELIVER.
Table of Contents
About Emtelle...............................................................................................................3
General Information......................................................................................................4
Direct Install (DI) Fibre Optic Cable..............................................................................5
Direct Install (DI) Mini Fibre Optic Cable......................................................................6
Direct Buried (DB) Fibre Optic Cable...........................................................................7
Aerial (ADSS) Fibre Optic Cable..................................................................................8
Low Fire Hazard (LFH) Fibre Optic Cable....................................................................9
RTRYVA Fibre Optic Cable........................................................................................10
Cable in Duct (CID) ...................................................................................................12
Wind farm Fibre Optic Cables (SCADA)....................................................................13
(SPEN) Approved Cables...........................................................................................16
(SSE) Cable...............................................................................................................18
(NRTS) Approved Cables...........................................................................................20
(Vodafone) Cables......................................................................................................24
Appendix A - Fibre Properties Tables.........................................................................25

3ENGAGE.LISTEN.INNOVATE.DELIVER.
About Emtelle
Introduction
With over 30 years experience in the telecommunications industry, Emtelle is a leading global manufacturer of
blown fibre and ducted network solutions. We have a proven track record, and a reputation for exemplary custom-
er service.
The history of telecommunications and the nature of our company are intrinsically linked. As we have responded
to changes in technology, market demand and customer expectation, our innovation, expansion, and development
has in turn helped shape the industry.
We have not only evolved as a direct result of telecommunications. Our innovative and forward thinking approach
to solving problems for customers has ensured we are a leading edge proponent of modern telecommunications
and a global market leader in multiple sectors.
When it comes to experience, production volume, and innovation, Emtelle is the industry leader in plastic tubing
for the telecommunication sector. As the first high-volume producer in the world of blown fibre tubing, Emtelle’s
expertise is unrivalled. Over 30 years of history as a supplier has shaped the high quality of our product, as well as
helped us to develop the most comprehensive and proactive customer service program possible.
Emtelle Group’s high volume projects include ITS projects in the UK and Australia, high rises in Dubai, ports in
the USA, the Gotthard Tunnel in Switzerland, the Olympic stadium in London, and the Kuala Lumpur monorail in
Malaysia.
Key Emtelle Sectors
Telecoms We have a long-standing track record in telecoms – we are directly or indirectly present in all impor-
tant “Fibre-to-the-X” markets worldwide.
Power is our comprehensive, easy to install, high performance duct systems and
accessories for underground power duct requirements.
Rail It is critical that modern rail infrastructures are underpinned by high speed, scalable and flexible
communication systems – Emtelle offer key products designed to facilitate these systems.
Water We are the market-leading manufacturer of durable, reliable PE (polyethylene) pipe systems for
drinking water supply and sewage systems, as well as irrigation systems for agriculture.
Highway It is critical that modern highway infrastructures are underpinned by high speed, scalable and flexi-
ble communication systems. Emtelle has a range of products to facilitate this.
Industrial Emtelle is a leading manufacturer of high quality PVC HDPE ducts for use in Industrial and Civil
applications.

Performance Standard
All Emtelle manufactured Fibre Optic Cables complies with the international standard IEC.60794.
Optical Fibre and Tube Identification
Emtelle standard fibre and tube colours are to EIA 598 as shown in table below. Customer specific colour configu-
rations are available on request.
Number  1 2 3 4 5 6 7 8 9 10 11 12
Colour  Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Number  11 12 13 14 15 16 17 18 19 20 21 22
Colour  Blue** Orange** Green** Brown** Grey** White** Red** Black** Yellow** Violet** Pink** Aqua**
** denotes additional identification e.g. ring markings
Fibre Properties
Refer to Appendix A for the following fibre properties tables:
Single Mode G.652D
Single Mode G.657A1 and A2
Multimode 50/125 and 62.5/125
Sheath Marking
Emtelle standard sheath marking is every 1 meter as shown in the example below. Customer specific markings are
available on request (separate product code).
Product Testing
At Emtelle the following product testing is carried out on all our Cable products.
Test Method
Max. Installation Tension IEC 60794–1–2-E1
Max. Operation Tension IEC 60794–1–2-E1
Crush IEC 60794–1–2-E3
Impact IEC 60794–1–2-E4
Torsion IEC 60794–1–2-E7
Repeated Bending IEC 60794–1–2-E6
Cable Bend IEC 60794–1–2-E11
Temperature Cycling IEC 60794–1–2-F1
Water Penetration IEC 60794–1–2-F5B
General Information
Emtelle Fibre Optic Cable - Fibre Count - Fibre type - Product Code - Batch ID - Meter Mark

Direct Install (DI) Fibre Optic Cable
Cable Application
This optical fibre cable range is all dielectric and designed for installation into a duct by blowing or pulling.
Cable Fibre Count Options
144f
96f24f 48f36f12f 72f
12 Fibres per tube
Fibres coloured as (1) blue; (2) orange; (3) green; (4) brown; (5) grey; (6) white; (7) red; (8) black t; (9) yellow; (10) violet; (11) pink; (12) turquoise
Tubes:1stblue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th white, 7th red, 8th, black, 9th yellow, 10th violet, 11th pink, 12th turquoise (fillers
where necessary)
Cable Features and Benefits
Sheath: Medium density polyethylene, UV-stable
Water Blocking: Gel-filled loose tube, water blocking yarn and tape
Strain Relief FRP central strength member
Stripping: Ripcord provided for quick and easy sheath removal
Fibre counts: 12f to 144f
Fibre types Available: Single mode to G.652D, G.657A1, G.657A2 (ITU-T)
Multimode 62.5/125 OM1 (ISO 11801)
Multimode 50/125 OM2, OM3, OM4 (ISO 11801)
Cable Characteristics
Max fibres - 12f 24f 36f 48f 72f 96f 144f
Number of tubes - 6 6 6 6 6 8 12
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Number of dummy tubes # 5 4 3 2 - - -
Central strength member Ø mm 2.3 2.3 2.3 2.3 2.3 2.6/3.7 3/6.9
Cable mass kg/km 86 87 87 88 90 114 178
Sheath Thickness mm 2 2 2 2 2 2 2
Cable outer Ø mm 10.9 10.9 10.9 10.9 10.9 12.4 15.5
Bending radius (Installation) mm 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø
Bending radius (Service) mm 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø
Max load (fibre strain 0.3% max)* kN 1.5 1.5 1.5 1.5 1.5 2.0 3.0
Design Spec - CP2596 CP2596 CP2596 CP2596 CP2596 CP2596 CP2596
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6 4 6
Product Code (G.652D version) - 90565 90566 90567 90568 90569 90570 90571
*Different tensile strengths are available on request.

Direct Install (DI) Mini Fibre Optic Cable
Cable Application
This optical fibre mini-cable range is for insertion into single or multi-duct tube assemblies. It’s designed to be
installed in telecommunications networks by the use of viscous drag with the assistance of pushing by a suitable
blowing apparatus. This cable range is not designed for installation by pulling.
72f
144f
48f24f 96f12f 36f
12 Fibres per tube
Tubes:1stblue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th white, 7th red, 8th, black, 9th yellow, 10th violet, 11th pink, 12th turquoise
(fillers where necessary)
Sheath: High density polyethylene
Water Blocking: Gel-filled loose tube, dry core with water swellable elements
Fibre types available: Single mode to G.652D, G.657A1, G.657A2 (ITU-T)
Tube OD/ID Ø mm 1.45/1.15 1.45/1.15 1.45/1.15 1.45/1.15 1.45/1.15 1.45/1.15 1.45/1.15
Central strength member Ø mm 1.65 1.65 1.65 1.65 1.65 2.6 4.5
Cable mass kg/km 24 25 25 26 27 37 58
Sheath Thickness mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Cable outer Ø mm 5.8 5.8 5.8 5.8 5.8 6.4 8.5
Design Spec - CP1354A CP1354A CP1354A CP1354A CP1354A CP1123C CP1747A
Supply length Km 4, 6, 8 12 4, 6, 8 12 4, 6, 8 12 4, 6, 8 12 4, 6, 8 12 4, 6, 8 12 4, 6, 8 12

Direct Buried (DB) Fibre Optic Cable
Cable Application
This optical fibre cable range is all dielectric and designed for installation into duct by pulling, directly onto cable
trays or direct burial into suitably prepared ground.
96f
72f48f12f 36f24f
144f
12 Fibres per tube
Outer Sheath: High density polyethylene, UV Stable
Inner sheath: Black nylon
Water blocking: Gel-filled loose tube, water blocking yarn and tape
Strain relief: FRP central strength member
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 106 107 107 108 110 137 206
Sheath Thickness mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6
Cable outer Ø mm 12.5 12.5 12.5 12.5 12.5 13.9 17
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6 4 6

Aerial (ADSS) Fibre Optic Cable
Cable Application
This optical fibre cable range is designed for aerial network deployment as an overhead
self-supporting cable.
144f
72f48f12f 36f24f
96f
12 Fibres per tube
Strain relief: FRP central strength member and peripheral strength elements
Fibre Counts: 12f to 144f
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 77 78 78 79 81 104 166
Sheath thickness mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6
Cable outer Ø mm 10.3 10.3 10.3 10.3 10.3 11.7 14.8
Long term loading
(fibre strain minimal)*
kN 3.0 3.0 3.0 3.0 3.0 3.4 4.2
Max span** meters 40-130 40-130 40-130 40-130 40-130 40-130 40-130
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6 4 6

Low Fire Hazard (LFH) Fibre Optic Cable
Cable Application
This optical fibre cable range has a low flammability, halogen free and low smoke sheath. It has been designed for
internal installation directly onto cable trays or into a duct by pulling.
96f
64f16f 32f24f8f 48f
8Fibres per tube
Fibres coloured as (1) blue; (2) orange; (3) green; (4) brown; (5) grey; (6) white; (7) red; (8) black
Sheath: Low flammability, halogen free, low smoke
Fire performance: IEC 60332-1
Tube OD/ID Ø mm 1.7/1.25 1.7/1.25 1.7/1.25 1.7/1.25 1.7/1.25 1.7/1.25 1.7/1.25
Central strength member Ø mm 1.9 1.9 1.9 1.9 1.9 3 3/5
Cable mass kg/km 93 94 94 95 97 122 173
Sheath Thickness mm 2 2 2 2 2 2 2
Cable outer Ø mm 9.7 9.7 9.7 9.7 9.7 10.8 12.8
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6 4 6

Fibre Optic Cable
Cable Application
This optical fibre cable range is designed for direct burial into suitably prepared ground and indoor applications. It
has can be window cut at the customer drop location and a fibre tube retracted.
48f
24f
12f
2 Fibres per tube
Fibres coloured as (1) blue; (2) orange
Tubes: 12 – 24 same sequence as above but (marked)
Sheath: High density polyethylene, UV-stable
Strain relief: 2 x FRP strength members
Max fibres - 12f 24f 36f
Number of tubes - 6 12 24
Tube OD/ID Ø mm 1.45/0.8 1.45/0.8 1.45/0.8
strength members Ø mm 0.8 0.8 1.5
Cable mass kg/km 42 94 144
Sheath thickness mm 1.5 2.5 3
Cable outer Ø mm 8 12 15
Bending radius (Installation) mm 20 x Ø 20 x Ø 20 x Ø
Bending radius (Service) mm 10 x Ø 10 x Ø 10 x Ø
Max fibre pull back distance Mtr 20 20 20
Design - CP2604 CP2604 CP2604
Supply length Km 1, 2 4 1, 2 4 1, 2 4
Product Code (G.652D version) - 90595 90596 90597

Fibre Optic Cable
in Duct for use on
Wind Farms
Renewables Sector

Application
Designed for use by the power and telecommunications markets,
Emtelles Cable in Duct (CID) products are suitable for a wide range
of applications. These products are ideal for use in applications
where remote monitoring is required. (SCADA networks for exam-
ple).
Features and Benefits
With Emtelles CID products fibre optic cables are pre-installed into
sub-ducts and transported to site on standard sub-duct drums.
Deploying Emtelles CID offers several key advantages such as
shorter installation time, reduced logistics and improved quality due
to the elimination of cable pulling.
Due to the use of high quality Emtelle sub duct the CID solution is
ideally suited to installation via mole plough.
Technical Data
Below is Emtelles standard Cable in Duct (CID) range and the maximum OD of cable possible for the duct size.
Other duct sizes are available on request if customer cable diameter exceeds the sizes shown on table.
Size Wall Thickness
Nom
Mass Nom
g/m
Max Pull Max Cable
Diam
Generic
SpecificationOD ID kg kN
20 16 2.0 111 110 1.0 9 MHT582
25 20 2.5 168 170 1.7 9 MHT582
25 21 2.0 139 140 1.4 10 MHT582
28 24 2.0 162 160 1.6 13 MHT582
31 25 3.0 251 260 2.6 14 MHT582
32 26 3.0 260 260 2.6 15 MHT582
32 27 2.5 220 220 2.2 16 MHT582
32 28 2.0 179 180 1.8 17 MHT582
34 28 3.0 278 270 2.7 17 MHT582
35 28 3.5 329 330 3.3 17 MHT582
35 30 2.5 242 250 2.5 19 MHT582
40 32 4.0 425 430 4.3 21 MHT582
50 41 4.6 612 610 6.1 30 MHT582
63 50 6.5 1096 1100 1.1 39 MHT582
Cable in Duct (CID)

Wind farm Fibre Optic Cables (SCADA)
Option A Cable Application
This fibre optic cable has been designed specifically for the wind farm sector. It is a dielectric optical fibre cable
with rodent resistance (nylon layer beneath outer sheath) and is ready for direct burial into suitably prepared
ground or pulling into existing ducting. This product can also be pre-installed inside a sub duct (Refer to page 12).
72f48f12f 36f24f16f
12 Fibres per tube (16f – 8 Fibres per tube)
Fibres coloured as (1) blue; (2) orange; (3) green; (4) brown; (5) grey; (6) yellow; (7) red; (8) violet; (9) pink; (10) white; (11) black; (12) turquoise
Tubes: 1st Yellow; 2nd Blue; 3rd White; 4thBlack; 5th Red; 6th Green (fillers where necessary)
Rodent Resistance: Nylon Layer beneath outer sheath
Max fibres - 12f 16f 24f 36f 48f 72f
Number of tubes - 6 6 6 6 6 6
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Number of dummy tubes # 5 4 4 3 2 -
Central strength member Ø mm 2.3 2.3 2.3 2.3 2.3 2.3
Cable mass kg/km 106 106 107 107 108 110
Sheath thickness mm 1.6 1.6 1.6 1.6 1.6 1.6
Cable outer Ø mm 12.5 12.5 12.5 12.5 12.5 12.5
Bending radius (Installation) mm 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø
Bending radius (Service) mm 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø
Max load (fibre strain 0.4% max)* kN 3.1 3.1 3.1 3.1 3.1 3.1
Design Spec - CP2120A-KG CP2120A-KG CP2120A-KG CP2120A-KG CP2120A-KG CP2120A-KG
Supply length Km 2 2 2 2 2 2
Product Code (G.652D version) - 90598 90089 90384 90599 90600 90601
APPROVED
Scottish Power
Renewables

Wind farm Fibre Optic Cables (SCADA)
Option B Cable Application
This Fibre optic cable has been designed specifically for the wind farm sector. It is a dielectric optical fibre cable
with rodent resistance (E-glass tape beneath outer sheath) and is ready for direct burial into suitably prepared
ground or pulling into existing ducting. This product can also be pre-installed inside a sub duct (Refer to page 12).
72f36f 48f24f12f
12 Fibres per tube
Tubes: 1stblue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th white
Rodent Resistance: E-glass tape beneath outer sheath
Max fibres - 12f 24f 36f 48f 72f
Number of tubes - 6 6 6 6 6
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Number of dummy tubes # 5 4 3 2 -
Central strength member Ø mm 2.3 2.3 2.3 2.3 2.3
Cable mass kg/km 105 106 106 107 109
Sheath thickness mm 2 2 2 2 2
Cable outer Ø mm 11.4 11.4 11.4 11.4 11.4
Bending radius (Installation) mm 20 x Ø 20 x Ø 20 x Ø 20 x Ø 20 x Ø
Bending radius (Service) mm 10 x Ø 10 x Ø 10 x Ø 10 x Ø 10 x Ø
Max load (fibre strain 0.3% max)* kN 2.5 2.5 2.5 2.5 2.5
Design Spec - CP2055B CP2055B CP2055B CP2055B CP2055B
Supply length Km 2 2 2 2 2
Product Code (G.652D version) - 90434 90602 90603 90604 90605

Fibre Optic Cables
for use within the
Power Sector

t(SPEN) Approved Cables
This fibre optic cable has been designed specifically for Scottish Power Energy Networks. It is a dielectric optical
fibre cable with rodent resistance (nylon layer beneath outer sheath) and is ready for direct burial into suitably pre-
pared ground or pulling into existing ducting. It is approved for installation into SPEN 110mm telecom duct systems
or SPEN Opti-com duct systems.
72f48f36f24f12f
12 Fibres per tube
Tubes: 1st – 4th White; 5th Red; 6th Green (fillers where necessary)
Rodent Resistance: Nylon layer beneath outer sheath
Fibre attenuation (20°C): 0.35 dB/km max at 1310 nm and 1383 nm
0.21 dB/km max at 1550 nm
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 118 119 119 120 122
Sheath thickness mm 1.6 1.6 1.6 1.6 1.6
Cable outer Ø mm 12.5 12.5 12.5 12.5 12.5
Design Spec - CP2120A CP2120A CP2120A CP2120A CP2120A
APPROVED

This fibre optic cable has been designed specifically for Scottish Power Energy Networks. It is a dielectric optical
fibre cable and is ready for direct burial into suitably prepared ground or pulling into existing ducting. It is approved
for installation into SPEN 110mm telecom duct systems or SPEN Opti-com duct systems.
72f48f12f 36f24f
12 Fibres per tube
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 114 115 115 116 118
Cable outer Ø mm 12.5 12.5 12.5 12.5 12.5
Bending radius mm 250 250 250 250 250
Design Spec - CP2119A CP2119A CP2119A CP2119A CP2119A
APPROVED

(SSE) Cable
Cable Application
This fibre optic cable has been designed specifically for Scottish and Southern Energy. It is a dielectric optical fibre
cable and is ready for installation into a duct by pulling or directly onto cable trays.
48f36f12f 24f16f
8/12 Fibres per tube
Fibres coloured as (1) blue; (2) orange; (3) green; (4) brown; (5) grey; (6) white; (7) red; (8) black; (9) yellow; (10) violet; (11) pink; (12) turquoise
Tubes: 1st Orange; 2nd Blue; 3rd White; 4th White; 5th White; 6th White (fillers where necessary)
Max fibres - 12f (1x12) 16f (2x8) 24f (3x8) 36f (3x12) 48f (6x8)
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 82 82 83 84 84
Cable outer Ø mm 10.7 10.7 10.7 10.7 10.7
Design Spec - CP2385 CP2385 CP2385 CP2385 CP2385

Fibre Optic Cables
for use within the
Highways Sector

t(NRTS) Approved Cables
This fibre optic cable has been designed specifically for the Highways sector. It is a dielectric optical fibre cable
and is ready for installation into a duct by pulling.
96f72f48f36f24f12f
12 Fibres per tube
Tubes: 1st Green; 2nd Red; 3rd White; 4th White; 5th White; 6th White; 7th White; 8th White (fillers where necessary)
Water blocking: Gel-filled loose tube and water blocking yarn
Fibre types available: Single mode to G.652D, G.657A1 (ITU-T)
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Number of dummy tubes # 7 6 5 4 2 -
Central strength member Ø mm 3.75 3.75 3.75 3.75 3.75 3.75
Cable mass kg/km 118 118 119 119 121 122
Cable outer Ø mm 12.4 12.4 12.4 12.4 12.4 12.4
Max load (fibre strain 0.4% max)* kN 2.4 2.4 2.4 2.4 2.4 2.4
Design Spec - CP2388 CP2388 CP2388 CP2388 CP2388 CP2388
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6

72f48f36f24f12f
12 Fibres per tube
Tube OD/ID Ø mm 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6 2.1/1.6
Cable mass kg/km 70 70 71 71 73
Cable outer Ø mm 10.0 10.0 10.0 10.0 10.0
Design Spec - CP2387 CP2387 CP2387 CP2387 CP2387
Supply length Km 4 6 4 6 4 6 4 6 4 6

(NRTS) Approved Cables
Option C Cable Application
10f 12f8f6f4f2f
Fibres coloured as (1) blue;(2) orange;(3) green;(4) brown;(5) grey;(6) yellow;(7) red;(8) violet;(9) pink;(10) white;(11) black;(12) turquoise
Tubes: 1st White;
Water blocking: Gel-filled loose tube and water blocking yarn
Strain relief: peripheral strength elements
Tube OD/ID Ø mm 3.2/2.4 2.1/2.4 2.1/2.4 2.1/2.4 2.1/2.4 2.1/2.4
Cable mass kg/km 49 49 49 49 49 49
Cable outer Ø mm 8.0 8.0 8.0 8.0 8.0 8.0
Tensile strength kN 1.5 1.5 1.5 1.5 1.5 1.5
Design Spec - CP2389 CP2389 CP2389 CP2389 CP2389 CP2389
Supply length Km 4 6 4 6 4 6 4 6 4 6 4 6

Fibre Optic Cables
for use within the
Telecommunications
Sector

t(Vodafone) Cables
This optical fibre cable range is all dielectric and designed for installation into a duct by blowing or pulling.
8f 24f 48f
8 Fibres per tube
Fibres coloured as (1) blue; (2) orange; (3) green; (4) brown; (5) grey; (6) yellow; (7) red; (8) violet
Tubes:1st blue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th yellow (fillers where necessary)
Stripping: Ripcords provided for quick and easy sheath removal
Fibre type: Single mode to G.652D (ITU-T)
Tube OD/ID Ø mm 1.7/1.25 1.7/1.25 1.7/1.25
Number of dummy tubes # 5 3 -
Central strength member Ø mm 1.9 1.9 1.9
Sheath thickness mm 1.6 1.6 1.6
Cable outer Ø mm 8.9 8.9 8.9
Max Tensile load kN 1.2 1.2 1.2
Design Spec - CP1949 CP1949 CP1949

8f 24f 48f
8 Fibres per tube
Tubes:1st blue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th yellow (fillers where necessary)
Tube OD/ID Ø mm 1.7/1.25 1.7/1.25 1.7/1.25
Number of dummy tubes # 5 3 -
Central strength member Ø mm 1.9 1.9 1.9
Sheath thickness mm 2 2 2
Cable outer Ø mm 9.7 9.7 9.7
Max Tensile load kN 1.2 1.2 1.2
Design Spec - CP2332 CP2332 CP2332

t(Vodafone) Cables
Option C Cable Application
This optical fibre cable is all dielectric and designed for installation into a duct by blowing or pulling.
96f
8 Fibres per tube
Tubes:1st blue; 2nd orange; 3rd green; 4th brown; 5th grey; 6th yellow, 7th red, 8th, violet, 9th pink, 10th white, 11th black, 12th turquoise
Strain Relief FRP central strength member with PE sheath
Stripping: Ripcords provided for quick and easy sheath removal
Fibre counts: 96f
Max fibres - 96f
Number of tubes - 12
Tube OD/ID Ø mm 1.7/1.25
Number of dummy tubes # -
Central strength member Ø mm 3.0/5.4
Cable mass kg/km 114
Sheath thickness mm 1.5
Cable outer Ø mm 12.2
Bending radius (Installation) mm 20 x Ø
Bending radius (Service) mm 10 x Ø
Max Tensile load kN 2.7
Design Spec - CP2331
Supply length Km 4 6
Product Code (G.652D version) - 90669

Option D Cable Application
24f
8 Fibres per tube
Tube:1st yellow;
Water blocking: Gel-filled loose tube water blocking elements
Strain relief: Aramid yarns
Fibre count: 8f
Max fibres - 8f
Number of tubes - 1
Tube OD/ID Ø mm 2.3/1.5
Number of dummy tubes # -
Cable mass kg/km 40
Sheath thickness mm 1.5
Cable outer Ø mm 6.0
Bending radius (Installation) mm 20 x Ø
Bending radius (Service) mm 10 x Ø
Max Tensile load kN 1.0
Design Spec - CP1950
Supply length Km 4 6
Product Code (G.652D version) - 90670

Single Mode G.652D Optical Fibre General Properties
Single mode fibre shall meet ITU-T G.652D as well as the following requirements, given in table 1 below. Specific
properties for preferred fibre manufacturers are available on request.
Table 1 Properties G.652D
Parameter Value
Glass Diameter 125 ± 0.7microns
Core Non Circularity ≤ 6%
Core-Concentricity error ≤ 0.5 micron
Cladding Non Circularity 1%
Coating Diameter (Uncoloured) 235 microns minimum
250 microns maximum
Coating Diameter (Self Coloured) 250 ±15 microns
Colouring Layer 2 to 8 microns
Coating-Cladding Concentricity 12 microns
Attenuation ≤ 0.34 dB/km 1310nm )
≤ 0.20 dB/km 1550nm ) 100% of fibre
≤ 0.23 dB/km 1625nm )
Attenuation Uniformity No point discontinuity ≥ 0.05 dB at 1310
and 1550nm
Attenuation at water peak 0.34 dB/km at 1383 ±3nm
(100% of fibre)
Chromatic Dispersion:
Zero Dispersion wavelength
ZD Slope
Max dispersion at 1550nm
1302 – 1322nm
0.092 ps/nm.nm.km
18 ps/nm.km
Temperature Sensitivity ≤ 0.05dB/km increment over range –60° to +85°C at
1550 and 1310nm
Humidity Sensitivity ≤ 0.05 dB/km increment over range 4 to 93% RH at
1550 and 1310nm
Water Immersion ≤ 0.05 dB/km increment during and after 3 month water
soak. Nominally 20 ±3°C.
Bend Sensitivity 100 turns of fibre at 50mm diameter. Attenuation rise to
be ≤0.1dB at 1550nm and 1625nm
1 turn of fibre at 32mm diameter. Attenuation rise to be
≤ 0.5dB at 1550 and 1625nm.
Mode Field Diameter 9.3 ±0.5 microns 1310nm
10.4 ±0.8 micron at 1550nm
Cut Off Wavelength ≤1260nm
Proof Test ≥ 0.7 GPa
Stress Corrosion susceptibility parameter ≥ 20
Coating Strip Force 1.3 to 6N
Appendix A - Fibre Properties Tables

Single Mode G.657A1 and A2 Optical Fibre General Properties
Single mode fibre shall meet ITU-T G.657 A1 and A2 as well as the following requirements, given in the table 1
below. Specific properties for preferred fibre manufacturers are available on request.
Table 1 Properties For G.657A1 and A2
Parameter Value
Glass Diameter 125 ± 0.7 microns
Core-Clad Concentricity ≤0.5 micron
Coating Diameter (Uncoloured) 245 ± 10 microns
Coating Diameter (Self Coloured) 250 ± 15 microns
Attenuation ≤0.34 dB/km 1310nm)
≤0.20 dB/km 1550nm) 100% of fibre
≤0.23 dB/km 1625nm)
Point discontinuity 0.05 dB 1310,1550nm
Attenuation versus wavelength (max difference) 1285-1330 nm: 0.03dB
1525-1575 nm: 0.02dB
Temperature Sensitivity ≤0.05dB/km increment over range –60 to +85°C at 1550
and 1310 nm
Humidity Sensitivity ≤0.05 dB/km increment over range 4 to 93% RHat 1550
and 1310nm
Water Immersion ≤0.05 dB/km increment during and after 14 day water
soak. At 20 ± 3°C.
Bending Sensitivity Type A1 Fibre- 10 turns of fibre at 30mm diameter.
Attenuation rise to be ≤0.25dB at 1550nm and ≤1dB at
1625nm. 1 turn of fibre at 20mm diameter. Attenuation
rise to be ≤ 0.75dB at 1550 and ≤ 1.5dB 1625nm.
Type A2 Fibre- 10 turns of fibre at 30mm diameter.
Attenuation rise to be ≤0.03dB at 1550nm and ≤0.1dB at
1625nm. 1 turn of fibre at 20mm diameter. Attenuation
rise to be ≤ 0.1dB at 1550 and ≤ 0.2dB 1625nm. 1 turn
of fibre at 15mm diameter. Attenuation rise to be ≤ 0.5dB
at 1550 and ≤ 1dB 1625nm.
Mode Field Diameter 8.6 to 9.5 ±0.4 microns 1310nm
Zero Dispersion slope (S0) ≤ 0.092ps/nm2. km
Dispersion Values 1550nm: ≤ 18 ps/nm. Km
1625nm: ≤ 22 ps/nm. Km
Cable Cut Off Wavelength 1260nm
Proof Test ≥ 0.69 GPa
Stress Corrosion susceptibility parameter ≥ 20
Coating Strip Force 1.0 to 10 N

Multimode 50/125 and 62.5/125 Optical Fibre General Properties
Multimode 50/125 and 62.5/125 fibres compliant with IEC60793-2-10 types A1a, A1a.2 or A1b, and meet the re-
quirements of Tables 1 to 6.
Table 1 Standards
Emtelle Class Fibre Core/Cladding
(microns)
ISO/IEC 11801 IEC 60793-2-10 TIA/EIA
OM1 and OM1 HBW 62.5/125 type OM1 type A1b 492AAAA-A
OM2 and OM2 HBW 50/125 type OM2 type A1a.1 492AAAB
OM3 50/125 type OM3 type A1a.2 492AAAC-A
OM4 50/125 type OM4 TBA 492AAAD
Table 2 Bandwidth and Transmission Capacity
Fibre Class Bandwidth (MHz.km) *1000Base-SX
Gigabit Ethernet
Reach (m)
at 850nm
**10GBase-SR
10 Gigabit Ethernet
Reach (m)
at 850nm
Legacy LED Based Laser Based
OFLa
RMLb
EMBc
850nm 1300nm 850nm 850nm
OM1 200 500 220 - 300 -
OM1 HBW 200 600 220 - 300 -
OM2 500 500 - 510 600 -
OM2 HBW 600 1200 - - 600
850nm
1300nm -
OM3 1500 500 - 2000 1000 300
OM4 3500 500 - 4700 1100d 550d
Table 3 Attenuation
Fibre Class *Group Index of Refraction
850nm 1300nm
62.5/125 Fibres: OM1 and OM1 HBW 3.0 0.6
50/125 Fibres: OM2, OM2 HBW, OM3 and OM4 2.3 0.6
Table 4 Group Index of Refraction
Fibre Class Maximum Attenuation (dB/km)
850nm 1300nm
62.5/125 Fibres: OM1
and OM1 HBW
Required Range 1.491 - 1.496 1.490 – 1.495
*Supplier Value
50/125 Fibres: OM2, OM2
HBW, OM3 and OM4
Required Range 1.480 - 1.496 1.476 - 1.487
*Supplier Value
Table 5 Numerical Aperture
Fibre Class Numerical Aperture
Required Range *Supplier Value
62.5/125 Fibres: OM1 and OM1 HBW 0.275 ± 0.015
50/125 Fibres: OM2, OM2 HBW, OM3 and OM4 0.200 ± 0.015

Table 6 Properties For All Multimode Fibres
Parameter Value
Glass Diameter 125 + 2 microns
Core Non Circularity 6%
Core-Clad Concentricity 3.0 microns
Coating Diameter 245+ 10 microns
Coating Diameter 250 + 15 microns
Temperature Sensitivity 0.2 dB/km increment over range –60 to +85C at 850
and 1300 nm
Humidity Sensitivity 0.2 dB/km increment over range 4 to 93% RH
Bend Sensitivity 100 turns of fibre at 75mm diameter. Attenuation rise to
be 0.5 dB/km at 850 and 1300 nm
Chromatic Dispersion As per FDDI standard
Proof Test 0.7 GPa
Stress Corrosion susceptibility parameter 20
Coating Strip Force 1.0 to 6N
Lengths 8.8km, 16.8 17.6km

www.emtelle.com
www.fibre-to-the-home.com
Headquarters
Emtelle
Haughhead
Hawick
TD9 8LF
United Kingdom
Tel : + 44 (0)1450 364000
Fax : + 44 (0)1450 364001
E: info@emtelle.com
Emtelle Europe BV
Hoefseweg 1
3821 AE Amersfoort
The Netherlands
Sales Benelux and ACH
Tel: +31 85 273 1819
E: jandev@emtelle.com
Sales Germany
Tel: +49 2369 2069436
E: ralfg@emtelle.com
Sales Eastern Europe
Tel: +491736203705
E: hansw@emtelle.com
Emtelle Scandinavia
Vardevej 140
7280 Sønder Felding
Denmark
Tel: +45 86 28 84 88
Fax: +45 86 28 81 52
E: jensk@emtelle.com
Emtelle Asia Pacific
No. 4, Jalan PJU 1A/8
Ara Damansara
Taman Perindustrian Jaya
47301 Petaling Jaya
Selangor
Malaysia
Tel: +60 (0)3 7845 4406
Fax: +60 (0)3 7845 4459
E: stevef@emtelle.com.my
Emtelle Australia
Commercial Contact : Jason Hanlon
Tel: +61 459173205
jasonh@emtelle.com.au
Technical Contact : Graham Morris
Tel: +61 400793300
E: grahamm@emtelle.com.au
Emtelle India
Survey No. 214/1, 214/2
Virpura Bus Stop
P.O. Iyava
Taluka - Sanand
Ahmedabad 382170
Gujarat
India
E: ho@parixit.com

Emtelle Fibre Optic Cables - Product Catalogue 2016

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (15)

Andere mochten auch

Andere mochten auch (10)

Ähnlich wie Emtelle Fibre Optic Cables - Product Catalogue 2016

Ähnlich wie Emtelle Fibre Optic Cables - Product Catalogue 2016 (20)

Mehr von Thorne & Derrick International

Mehr von Thorne & Derrick International (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Emtelle Fibre Optic Cables - Product Catalogue 2016