Measures of Central Tendency: Mean, Median and Mode
Free fit astm results
1. Test Name FreeFit
Test Spec
Definition of Test www.freefitfloors.com
Static Load Limit (psi)
Passes
Measures long term indentation recovery ASTM F-970
properties
2,000 psi
Residual Indentation
Passes
Measures short term indentation recovery ASTM F-1914
properties
None Greater than 6% (.010")
Static Coefficient of Friction
Average Results 0.8
Measures slip resistance on both wet and ASTM C-1028
dry surfaces
Exeeds ADA Guidelines at 0.6
Abrasion Resistance Passes
ASTM D-3884
Measures wear performance or durability 23,500 cycles
Critical Radiant Flux
Measures flamability
ASTM E-648 Class I
Specification for Solid Vinyl Floor Tile
ASTM F-1700 Passes
Measures performance characteristics
Thickness Passes
ASTM F-F386-11
Measures thickness of the product (.002")
Squareness Passes
ASTM F-2055-10
Measures actual dimensions - squareness (.003")
Squareness
Measures actual dimensions - ASTM F-2055-00 Passes
length and width
Flexibility
Meaures the ability of the product to resist Passes
ASTM F-137
cracking, breaking or other permanent No Breaks (over 1" mandrel)
deformities
Dimensional Stability @ 180° F Measures
the ability of the floor to retain its original
dimensions after exposure to heat Passes
FreeFit has also been tested to 0° F and
ASTM F-2199
(.002")
results showed superior dimensional
stability
Chemical Resistance
Measures the susceptibility of the floor to
ASTM F-925 Passes
change when exposed to chemical
reagents
Resistance to Heat
Measures the amount of color change when
ASTM F-1514 Passes
subjected to an elevated termperture over a
period of time
Resistance to Light
Measures the products ability to resist ASTM F-1515 Passes
discoloration from light
2. Specific Optical Density
Passes
Measures the density of smoke and its ASTM E‐662
< 450
relationship to visiblity
Lead & Heavy Metal Content
Passes
Measure Content of Lead and Heavy ASTM F‐963‐08
Metals
None Detected
IIC (Impact Insulation Class) Measures
the sound transmitted through the floor‐ ASTM E‐989 Results Pending
ceiling assembly into the room below
STC (Sound Transmission Class)
ASTM E‐90
Measures the decibel reduction in noise Results Pending
ASTM E‐413
that a floor can provide
Smoke Generation & Flame Spread
Provides a comparative measure of surface
flame spread and smoke density to a
ASTM E‐84 Results Pending
sample of select red oak and fiber ‐ cement
board surface under specific fire exposure
conditions
IMO Testing
Under requirements established by the
International Maritime Organization, the
US Coast Guard and other Maritime
IMO Results Pending
Governing Bodies, materials used as
interior finishes on maritime vessels must
be tested for surface flammability
performance