1. ED3 SkidWeigh Plus Series
Management Tools to Improve Lift Truck Utilization
In the world of material handling, warehousing and logistics everything needs to keep moving.
Lift truck uptime is the key to productivity.
Measuring performance against standard utilization factor in a real-time by collecting and updating raw
data such as driving loaded / unloaded, standing loaded / unloaded, lift time, minimum load weight,
number of loads,etc. will improve your bottom line immediately.
All of the VMS systems collect large amount of data and compare lift truck utilization across the
enterprise based on historical data (ignition switch time on, lift time, pallets stored, etc.) which in most
of the cases is irrelevant to increase performance of the operators and vehicle utilization.
In order to produce positive bottom line results with little upfront investment and relatively short
payback you must manage the operation at a lower level and report productivity results in terms of
vehicle utilization measured in real-time on an individual basis.
Lift truck operator accountability incorporating visual remainder of the current utilization factor with
exceptions reporting in real-time will result in sustainable improvements in operator performance and
* On board weighing
* Parts count by weight
* Lift truck utilization
* Downtime justification reporting
* Overload warning
* Lift truck impact detection
* Excessive engine idling
* Overspeed
* OSHA safety check
2. STANDARD PRODUCT SPECIFICATIONS
Technical Data
Standard Features
-
- Weighing range up to 50000 lb. or kg
- Single weighing channel
- Lift-n-weigh load weighing procedure
- English and French languages
- Automatic calibration
- Pressure transducer self testing function
- Month/Day/Year LCD visual display
- Hours/Minutes/Seconds LCD display
- Graduation 1,5,10,50 and 100
Voltage from 12 to 55 V DC
Operating current 40mA
Technology, micro controller
Real-time clock
Four analog inputs
USB port, optional
RS232 port
LCD display, 2 lines x 16 characters
Display size 68 x 27 x 11 mm
Character size 6.68 x 2.76 mm
LED backlight
High contrast LCD super twist display
Keypad 16 key with tactile feedback
Sealed keypad, watertight
Functions overlay
Enclosure ABS, 120 x 80 x 55 mm
Weight, 0.5kg
Operating temperature -20 C to +70 C
Pressure Transducer (Swiss Made)
Port, male thread 1/4”-18 NPT
Built in pressure snubber
NEMA 4X protection
Reverse polarity protection
Over voltage protection
Short circuit protection
CE conformity, EN 61326-2-3
Check weighing accuracy +/- 0.1 to 1%
of lift truck lifting capacity
Optional Features
- Two weighing channels
- Total load weight
- On-board printers
- Under utilization monitoring
- Impact detection
- Overload warning
- Engine idle monitoring
- Safety check monitoring & reporting
- Alphanumerical keys
- Manual input for Tare
- Bluetooth on-board printer
- Bluetooth module, long range
- Load monitoring in % of lift capacity
- Automatic zero weight re-calibration
- Continuous load weight update
- Operator ID# input function
- Wireless web based reports
- Enfora modem, FCC ID: MIVGSM0408
COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE
High contrast LCD display
with LED backlight, super
twist, 2 lines x 16 characters
Clear cover, impact resistant
with seamless foam-in-place
gasket assures watertight and
dust-tight seal
ABS enclosure, NEMA
Type 4X, flammability
rating UL94-HB, IEC
60529, IP67
Surface mount
printed circuit
technology
Liquid tight straight thru fitting, UL
E-51579, CSA LR-93876
Universal power
supply input from
12 to 55 V DC
Mounting bracket with
Cylindrical mount,
neoprene, 1/4’-20
MATERIAL HANDLING DEALER
ED3-V2-2012-D
