3. Military Temporary Storage For Short/Long term rental or purchase.
International provides temporary structures, warehousing, storage and building
solutions. We are U.A.E based company that is ideally placed to offer our Military temporary
structures and storage solutions nationwide , We also offer a hire or buy option when it comes to
our temporary structures and temporary warehousing solutions .
International gives you the opportunity to increase your covered storage area at your
existing premises within a very short period of time. Many of our clients have been avoiding
expenditures by restricting their activities to one site rather than renting off site space which can be
an inflexible and expensive alternative to an Instant Space structure.
4. What is an industrial structure?
In the case of an industrial structure, an aluminum framework is covered with a tarpaulin made of
translucent, PVC-coated fabric. An advantage of these light-footed halls is that they can be set up
without a foundation.
Aluminum Structures Steel Structures
5. Membranes
About architectural membranes :
There is a range of different types of membranes to choose from. With attention and care you must choose
which type better matches your requirements. The material's role in the structure's integrity and performance
makes the selection process very essential.
PVC
PVC coated Polyester materials - the polyester base cloth is durable, strong and relatively not expensive.
The polyester base cloths are usually coated with PVC to preserve the color and resist water, heat, and wind.
6. Membranes
PVC :
High Resistance to stretching due to exceptional stability .
Two-way stress guarantees stringent monitoring of weft
thread for thorough compliance with the straight thread .
7. Membranes
PVC :
Anti-thermal Infrared
Anti-near Infrared
Fire and flam resistance
An effective response to risk of :
• Accidental tearing
• Intrusion
• Damage
• Theft
8. Membranes
PVC :
Eliminates, flaps, and reduces No Snow pockets No water Pockets
damage to ensure more durability of the Snow will not affect the roof No Leaks
structure Double Membrane = more comfort
Less health and safety consequences
Acoustic comfort especially in the internal prevents water from flowing along or
structure into aluminum profile.
More structure stability
The double membrane provides an air The double membrane provides an air
layer, helping isolate the inside of the layer helping reduce condensation
structure from the outside temperature.
10. Membranes
Sandwich Panels :
Our Sandwich Panel walling system works on the basis of four sheets between each two bays. Panels
are well installed for halls to have a near perfect finishing. It is very safe, strong, and durable.
Option for sandwich panel with Rockwool insulation is also available upon request. Outer and
inner layer of sandwich panel are made of pre-painted GI corrugated sheets and insulated with
50mm polyurethane or Rockwool.
11. Membranes
UPVC Panels :
Solid PVC panels are quickly and easily installed. Four to five panels can be placed between each two
bays.
The panels are secured by the simple configuration of the sub aluminum hardware kit. UPVC walling
system is strong and durable. It can be exchanged for Glass panels for getting more natural light.
It is available in many colors and its thickness can reach 30mm and its height ranges from 3-5 meters.
12. Membranes
Glass Panels :
Single and double glazed glass panels are quickly and easily installed. Four or five
panels cane be placed between each two bays.
The panels are secured by the simple configuration of the sub aluminum hardware kit. Glass walling
system is more flexible than other systems currently available on the market. It can be replaced by solid
UPVC panels or Sandwich panels for fixing door units. Same structural component applies to all panels
used.
13. Color Choices
Any color is available upon request. Standard color is: White translucent (usually used for roof
sections for maximum natural daylight transmission and a darker color is used for bottom section
near the foundation to hide the dirt)
17. Doors
halls can be fitted with a wide range of door selection. We supply all sizes of doors
based on the configuration of the building.
Standard door sizes:
personal door (standard 1.0m wide x 2.0m height)
Roller shutter doors (up to 5.0m wide x 5.0m height)
Sliding doors (up to 20m wide x 6.0m height)
18. Flooring
Wooden floors
• A 2440/1200/18mm commercial plywood with aluminum profile tube that supports both sides of
the panels. Uniform distributed load (UDL) can hold up to 300kg/m. Wooden floors are available
in different shapes and sizes and they are the most cost effective option for floors.
19. Flooring
Aluminum flooring
This type of flooring uses 3mm thick aluminum checker plate on the top of 18mm thick Commercial
Plywood. This material is anti-slippery and its mainly used for dining areas and kitchens.
Uniform distributed load (UDL) will be 400kg/m2
• Standard size is 2.44x1.2m fixed on aluminum profile tubes
• Floors are covered with anti-corrosive coating
20. Products
International temporary structures are the ideal solution for your short and medium
term space availability.
The structures can be extended or transferred to a different site at any time. It can be assembled
without a foundation and set up on existing asphalt or gravel surfaces. This guarantees that you
will always be able to master any major fluctuations due to space availability.
21. Hangars and Shelters used within Military Applications
Here are some examples of applications for AL Baddad hangars and shelters:
• Hangars for Helicopters / Aircrafts/Tanks & Vehicles .
• Workshop tent
• Storage tent
• Tents to protect containers from weather conditions
• Tents to store military equipments
• Canteen tent
• Meeting tent
39. Engineering
Design
membrane buildings are designed for flexible use. Different shapes and dimensions are
available because our membrane fabrics has the property of formability, tensile, strength and durability.
We can build large span buildings with no pillars and make buildings meet the requirement for local wind,
snow, and seismic loads. All components are joined by bolts and the construction can be handled in short
time at the site. If necessary, components can also be disassembled easily for second use.
40. Installation
International can supply specialized shop drawings on foundation design. The
foundation requirements for structures are typically lower than for traditional
metal and concrete construction because our buildings can withstand moderate differential
foundation settlement. Besides, we attach detailed product instructions and clients can
install the components using minimal tools and support equipment by themselves.
41. www.albaddadintl.com
U.A.E
KSA Yemen
Nigeria BAHRAIN Ghana
Nigeria QATAR
Rwanda
Maldives
OMAN Morocco
Tunisia
USTRALIA Haiti
Djibouti KUWAIT
SUDAN Senegal
Algeria Togo SA
India Armenia Libya
AFGHANISTAN EUROUP
USA
JORDAN
UAE - Head Office Tel : + 971 -4 -8029901 sudheerkumar@albaddadintl.com
Dubai- P.O Box 56162 Fax : + 971 -4 -8029903 Cell: 00971 50 5474929