3. SPECIFIC SAFETY RULES
1. Stock must be at least at least 8” long to
go through the DeWALT planer.
2. Never stand directly behind in case of
kick back.
3. Let go of the stock the board after it
starts through the planer.
4. USEFULL TIPS
1. Measure the thickness of your stock and adjust
the planer to remove 1/16” of material
thickness.
2. Rotate the hand wheel on the side of the
planer by 1/2 of a turn to reduce stock
thickness until proper thickness is achieved.
3. Plane all your stock at the same time to ensure
equal thickness.