2. SPECIFIC PURPOSE
• A very versatile cutting machine used for
cutting CURVES, CIRCLES, and
IRREGULAR SHAPES.
3. SPECIFIC SAFETY RULES
1. Adjust the upper guide/guard assembly
so it is ¼" above the stock.
2. Always keep your fingers at least 2" from
the SIDE of the blade and NEVER IN
FRONT of the blade.
3. Use a PUSH STICK (Not your Fingers)
to push material CLOSE to the blade and
clear scraps off the table.
4. USEFULL TIPS
1. Make several RELIEF CUTS when cutting
sharp curves to avoid twisting the blade.
2. Cut on the WASTE SIDE of your layout line.
5. RELIEF CUTS
(Sketch & Label)
Waste Material
Material Being
Cut
Band Saw Blade
Layout Line
Relief Cuts
6. RELIEF CUTS
(Sketch & Label)
Waste Material
Material Being
Cut
Band Saw Blade
Layout Line
Relief Cuts