See Water offers a complete line of Intrinsically Safe Oil Smart® pump control systems. The systems are designed to pump water without the risk of pumping oil, and provide constant monitoring of oil and water in hazardous locations

1. INTRINSICALLY SAFE OIL SMART PUMP SYSTEM
Overview:
See Water offers a complete line of Intrinsically Safe Oil Smart® pump control systems. The systems are
designed to pump water without the risk of pumping oil, and provide constant monitoring of oil and water
in hazardous locations. The components are UL listed as Intrinsically Safe approved for Class 1, Div 1,
and Group D Applications. See Water offers a complete line of
Intrinsically Safe Oil Smart pump control systems. These
Intrinsically Safe Control Panels are used on pump
applications. The Panels provide intrinsically safe circuit
extensions and control one (simplex) or two (duplex) pumps for
use in hazardous locations.
Features:









Industrial alarm system that is
UL listed relating to hazardous locations with
intrinsically safe circuit extensions approved for Class
1, Div 1, Group D applications
Intrinsically safe Liquid Smart® Sensor, Oil Smart
Sensor, and High Water Sensor (included only with
Duplex systems) with 20’ cords
Indoor/outdoor NEMA 4X heavy duty polycarbonate
enclosure with clear front and lockable latches
Intrinsically safe relay box to provide maximum safe
circuit protection
High liquid alarm with test and silence buttons, red
beacon alarm light. Alarm sounds at 85 decibels at 10
feet
Dry contacts for oil, water and high liquid condition
High demand two pump operation and pump
alternation (Duplex only)
IEC motor contactor, pump circuit breaker, adjustable
overload protection is provided in three phase panels.
HOA switch for auto or manual
pump control, pump run indicator
121 N. Dillon Street |San Jacinto, CA 92583
Voice: (951) 487-8073 | FAX: (951) 487-0557
http://www.seewaterinc.com

2. Applications
Hazardous locations classified as Class 1, Div 1, Group D
Elevator sumps, underground vaults, petroleum
Any application where there is a need to remove water while containing oil
Specifications:
Duplex Single
Phase
IS-WD1P-4-1021
IS-WD1P-4-1022
IS-WD1P-4-1023
IS-WD1P-4-1024
120/208/240VAC
0-7 FLA
7-15 FLA
15-22 FLA
22-32 FLA
Technical Specifications:







Oil Smart® Entity Parameters: Vmax=15.5VDC,
Imax=300mA, Li=OuH, Ci=3.05uF
Oil Smart® enclosure: Type 3R high impact
Injected plastic: 11.3”H x 2.5”W x 1.9”D
High Water Entity Parameters: Vmax=15.5VDC,
Imax=300mA, Li=1.13mH, Ci=.26uF max
High Water enclosure: Type 3R high impact
Injected plastic: 3.6”H x 1.5”W x 1.5”D
Liquid Smart® Entity Parameters:
Vmax=15.5VDC, Imax=450mA, Li=1.13mH,
Ci=.26uF
Liquid Smart® enclosure: Type 3R high impact
Injected plastic: 4.7”H x 1.5”W x 1.5”D
Intrinsically Safe components for use in Class 1,
Div 1, Group D Hazardous Locations
121 N. Dillon Street |San Jacinto, CA 92583
Voice: (951) 487-8073 | FAX: (951) 487-0557
http://www.seewaterinc.com