Injector flow rates of 96 lb injectors are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane.

1. Low impedance fire injectors
An injector is a thing which is used to inject something which is used to handle problems
related with high/low impedance injectors. And when it comes to the fact of different types of
injectors, one of the best one is 96 lb injectors which is available in different brands. This
injector uses the same technology as the Delphi Disc injectors. Some of the best defined
features that will assure it as a worthy one are longer service life, quieter operation, high-speed
disc and grease supplied to lubricate o-rings prior to installation which will allow wider dynamic
flow range for improved idling.
The rate of speed of these injectors are 96 lbs/hr at 43.5 PSI (3 BAR) and is also compatible with
alternative fuels (i.e. E85, Methanol). For the dynamic flow of improved idling, these injectors
have its flow rates depending on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA
emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at
about a 3 to 4% higher rate than n-Heptane. This low-impedance injector is designed to work
with peak and hold injector drivers typically found in aftermarket ECM/PCMs as well as
dedicated injector driver modules sold by Racetronix.

2. Injector flow rates of 96 lb injectors are based on testing with n-Heptane test solvent (0.6855
g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector
designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when
converting the flow specifications above. The coil resistance is just 2.35 Ohms which has low
impedance quality with static flow rate with 43.5PSI and the connector exists up to Bosch EV1.
The spray pattern used is pencil a factory fitted with Viton upper and lower o-rings.
Some of the features of 96 lb injectors are very well defined are excellent response
characteristics with robust design and low impedance. With this flat mating surface, the
injectors very well suited to turbocharged and supercharged applications that see high fuel
system pressures. Also, the injectors are able to function at high fuel pressures and they don’t
exhibit the high fuel pressure handling problems found with many other high flow high-
impedance injectors. It is also compatible with alternative fuels like E85 and Methanol. There is
also no fuel leakage for quicker starts which will make supplied Grease to lubricate o-rings prior
to installation.
So, these 96 lb injectors have most common injector designs at about a 3 to 4% higher rate
than n-Heptane. It is also dynamically flowed and grouped to within 1% tolerance and high
resistance which ensures high flows. Hence, the weight of it is 86.00GM and the static flow
ensures 1008 cc/min getting high importance in future. It is also available in different brands
with high number available in stocks that will make use of these injectors a little better than
before. Also, it is one of the best injector that has a dynamic flow of 20.7 mg/pulse making high
pressure flow the best and the worthy one.