Final digital jewelry report

Digital Jewelry
Dept of ISE, DBIT, Bangalore Page 1
Chapter-1
INTRODUCTION
The latest computer craze has been to be able to wear wireless computers. The Computer
Fashion Wave, "Digital Jewelry" looks to be the next sizzling fashion trend of the technological
wave. The combination of shrinking computer devices and increasing computer power has
allowed several companies to begin producing fashion jewelry with embedded intelligence.
Today‟s manufacturers place millions of transistors on a microchip, which can be used to make
small devices that store tons of digital data. The whole concept behind this is to be able to
communicate to others by means of wireless appliances. The other key factor of this concept
market is to stay fashionable at the same time.
As computing and technology become more ubiquitous in their conception, there is
evidence that designers are looking for methods of bridging technology with the human form
(corporate examples include IBM, Philips and Nike). The technology of the large corporate
companies is about mass-produced changes in our personal experience of the world. Mass-
production is by its nature detrimental to intimacy and the sense of individual experience.
Jewellery is about an intimate relationship between an individual and an object, and often forms
a link in the relationship between one person and another. This paper illuminates the contribution
that contemporary jewellery design can make to the design and conception of digital
communication devices, illustrating a creative methodology for creating new objects embodying
technology. The method acts to bridge the areas of HCI, contemporary jewelery and other design
disciplines. This research is not about inventing new mobile phones or PDAs, which are worn in
a novel way on the body, but is about the design and application of wearable digital technology
using the methods and perspective of a Contemporary Jeweler. The results include a new model
and perspective for viewing objects, in particular wearable objects involving computer
technologies. This paper has significance both directly within design and craft as well as wider
implications outside of this field.
By the end of the decade, we could be wearing our computers instead of sitting in front of
them.

Digital Jewelry
1.1 Scope
This seminar is about the design and application of digital jewelry which will be
implemented very soon in the real world. Through developing the pieces and critiquing existing
forms of information and communication devices I became aware that the issues raised by the
potential integration of digital technologies and jewelry were considerable. There has been a
radical shift in our relationships with, and experiences of, digital technologies during the last
sixty years. Developments of body-focused digital objects have fundamentally altered our
relationship with digital technologies, both physically and emotionally.
1.2 Purpose
The advent of digital jewelry has revolutionized the jewelry business by making it more
than just a fashion accessory, and in the near future we could all be wearing it as a vital means of
communication. Mobile phones may have reduced in size over the years, due to shrinking
computer devices and a major increase in computer power, but digital jewelry will enable you to
go one step further by adorning your body with a selection of compatible mobile components
that will work together as well as any mobile phone, and look stylish at the same time.
1.3 What Is Digital Jewelry?
Digital jewelry is the fashion jewelry with embedded intelligence.“Digital jewelry” can
help you solve problems like forgotten passwords and security badges.“Digital jewelry” is a
nascent catchphrase for wearable ID devices that contain personal information like passwords,
identification, and account information. They have the potential to be all-in-one replacements for
your driver‟s license, key chain, business cards, credit cards, health insurance card, corporate
security badge, and loose cash. They can also solve a common dilemma of today‟s wired world –
the forgotten password.

Digital Jewelry
1.4 Digital Jewelry and Its Components
Soon, cell phones will take a totally new form, appearing to have no form at all. Instead
of one single device, cell phones will be broken up into their basic components and packaged as
various pieces of digital jewelry. Each piece of jewelry will contain a fraction of the components
found in a conventional mobile phone. Together, the digital-jewelry cell phone should work just
like a conventional cell phone.
The various components that are inside a cell phone: -
Microphone, Receiver, Touch pad, Display, Circuit board, Antenna, and Battery.
IBM has developed a prototype of a cell phone that consists of several pieces of digital
jewelry that will work together wirelessly, possibly with Blue tooth wireless technology, to
perform the functions of the above components{1}.
FIG 1.1:Cell phones may one day be comprised of digital accessories that
Work together through wireless connections.
Here are the pieces of computerized-jewelry phone and their functions:
 Earrings - Speakers embedded into these earrings will be the phone's receiver.

Digital Jewelry
FIG 1.2: Speakers Embedded Into Earnings
These days many manufacturers are developing things like Bluetooth devices in the form
of pendants or earrings that people can wear that help enhance their mobile phones, computers
PDAs, basically anything that uses similar Technology.
 Necklace - Users will talk into the necklace's embedded microphone
FIG 1.3: Microphone Embedded Necklace
Necklace transfer the information in the forms of signals. It works with the help of
sensors which is embedded in it. It is mainly by blue tooth technology.

Digital Jewelry
 Ring - Perhaps the most interesting piece of the phone, this "magic decoder ring” is equipped
with light-emitting diodes (LEDs) that flash to indicate an incoming call. It can also be
programmed to flash different colors to identify a particular caller or indicate the importance
of a call.
Two of the most identifiable components of a personal computer are the mouse and
monitor. These devices are as familiar to us today as a television set. However, in the next
decade, we could witness the disappearance of these devices, at least in their current form.
Several companies, including IBM and Charmed Technology, are working on ways to
create a head-mounted display. IBM is also working to shrink the computer mouse to the size of
a ring and create a wrist-worn display.
FIG 1.4: IBM's magic decoder rings will flash when you get a call.
The same ring that flashes for phone calls could also inform you that e-mail is piling up
in your inbox. This flashing alert could also indicate the urgency of the e-mail.
The mouse-ring that IBM is developing will use the company's Track Point technology to
wirelessly move the cursor on a computer-monitor display. (Track Point is the little button
embedded in the keyboard of some laptops). IBM Researchers have transferred TrackPoint
technology to a ring, which looks something like a black-pearl ring. On top of the ring is a little
black ball that users will swivel to move the cursor, in the same way that the TrackPoint button
on a laptop is used.

Digital Jewelry
This Track Point ring will be very valuable when monitors shrink to the size of watch
face. In the coming age of ubiquitous computing, displays will no longer be tied to desktops or
wall screens. Instead, you'll wear the display like a pair of sunglasses or a bracelet. Researchers
are overcoming several obstacles facing these new wearable displays, the most important of
which is the readability of information displayed on these tiny devices.
 Bracelet - Equipped with a video graphics array (VGA) display, this wrist display could also
be used as a caller identifier that flashes the name and phone number of the caller.
FIG 1.5: (a)Bluetooth Bracelet built in rechargeable battery, when a call is coming the bracelet will vibrate
and lamp flash (b) Prototype bracelet display developed by IBM[1]
With a jewelry phone, the keypad and dialing function could be integrated into the
bracelet, or else dumped altogether -- it's likely that voice-recognition software will be used to
make calls, a capability that is already commonplace in many of today's cell phones. Simply say
the name of the person you want to call and the phone will dial that person. IBM is also working
on a miniature rechargeable battery to power these components.
1.5 Charmed Communicator’s Eyepiece
Charmed Technology is already marketing its digital jewelry, including a futuristic-
looking eyepiece display.

Digital Jewelry
FIG 1.6: The eyepiece above displays images and data received wirelessly from the communicator’s belt
module[4]
The eyepiece is the display component of the company's Charmed Communicator, a
wearable, wireless, broadband-Internet device that can be controlled by voice, pen or handheld
keypad. The Communicator can be used as an MP3 player, video player and cell phone. The
Communicator runs on the company's Linux-based Nanix operating system.
This would be the shape of designer glasses. These intelligent spectacles let you surf the
web or check e-mail, whenever and wherever you want. Your eye would serve as a mouse, with
menu items selected by focusing your attention on an item on screen.

Digital Jewelry
Chapter-2
LITERATURE SURVEY
Wireless communications is, by any measure, the fastest growing segment of the
communications industry. As such, it has captured the attention of the media and the imagination
of the public. Cellular systems have experienced exponential growth over the last decade and
there are currently around two billion users worldwide. Indeed, cellular phones have become a
critical business tool and part of everyday life in most developed countries, and are rapidly
supplanting antiquated wire line systems in many developing countries. In addition, wireless
local area networks currently supplement or replace wired networks in many homes, businesses,
and campuses. Many new applications, including wireless sensor networks, automated highways
and factories, smart homes and appliances, and remote telemedicine, are emerging from research
ideas to concrete systems.
2.1 History of Wireless Communications
The first wireless networks were developed in the Pre-industrial age. These systems
transmitted information over line-of-sight distances (later extended by telescopes) using smoke
signals, torch signaling, flashing mirrors, signal flares, or semaphore flags. An elaborate set of
signal combinations was developed to convey complex messages with these rudimentary signals.
Observation stations were built on hilltops and along roads to relay these messages over large
distances. These early communication networks were replaced first by the telegraph network
(invented by Samuel Morse in 1838) and later by the telephone. In 1895, a few decades after the
telephone was invented, Marconi demonstrated the first radio transmission from the Isle of
Wight to a tugboat 18 miles away, and radio communications was born. The first network based
on packet radio, ALOHANET, was developed at the University of Hawaii in 1971. This network
enabled computer sites at seven campuses spread out over four islands to communicate with a
central computer on Oahu via radio transmission. The network architecture used a star topology
with the central computer at its hub. The U.S. military was extremely interested in the
combination of packet data and broadcast radio inherent to ALOHANET. Throughout the 1970‟s
and early 1980‟s the Defense Advanced Research Projects Agency (DARPA) invested

Digital Jewelry
significant resources to develop networks using packet radios for tactical communications in the
battlefield. Packet radio networks also found commercial application in supporting wide-area
wireless data services. These services, first introduced in the early 1990‟s, enable wireless data
access (including email, file transfer, and web browsing) at fairly low speeds, on the order of 20
Kbps. A strong market for these wide-area wireless data services never really materialized, due
mainly to their low data rates, high cost, and lack of ―killer applications. These services mostly
disappeared in the 1990s, supplanted by the wireless data capabilities of cellular telephones and
wireless local area networks (LANs). The introduction of wired Ethernet technology in the
1970‟s steered many commercial companies away from radio-based networking.
2.2 Wireless Vision
The vision of wireless communications supporting information exchange between people
or devices is the communications frontier of the next few decades, and much of it already exists
in some form. This vision will allow multimedia communication from anywhere in the world
using a small handheld device or laptop. Wireless networks will connect palmtop, laptop, and
desktop computers anywhere within an office building or campus, as well as from the corner
cafe. In the home these networks will enable a new class of intelligent electronic devices that can
interact with each other and with the Internet in addition to providing connectivity between
computers, phones, and security/monitoring systems. Such smart homes can also help the elderly
and disabled with assisted living, patient monitoring, and emergency response. Wireless
entertainment will permeate the home and any place that people congregate. Video
teleconferencing will take place between buildings that are blocks or continents apart, and these
conferences can include travelers as well, from the salesperson who missed his plane connection
to the CEO off sailing in the Caribbean. Wireless video will enable remote classrooms, remote
training facilities, and remote hospitals anywhere in the world. Wireless sensors have an
enormous range of both commercial and military applications.

Digital Jewelry
2.3 Low-Cost Low-Power Radios: Bluetooth and Zigbee
As radios decrease their cost and power consumption, it becomes feasible to embed them
in more types of electronic devices, which can be used to create smart homes, sensor networks,
and other compelling applications. Two radios have emerged to support this trend: Bluetooth and
Zigbee. Bluetooth radios provide short range connections between wireless devices along with
rudimentary networking capabilities. The Bluetooth standard is based on a tiny microchip
incorporating a radio transceiver that is built into digital devices. The transceiver takes the place
of a connecting cable for devices such as cell phones, laptop and palmtop computers, portable
printers and projectors, and network access points. Bluetooth is mainly for short range
communications, e.g. from a laptop to a nearby printer or from a cell phone to a wireless headset.
Its normal range of operation is 10 m (at 1 mW transmit power), and this range can be increased
to 100 m by increasing the transmit power to 100 mW. The system operates in the unlicensed 2.4
GHz frequency band. The Bluetooth standard is named after Harald I Bluetooth, the king of
Denmark between 940 and 985 AD who united Denmark and Norway.
2.4 Jewelry as Communication
When designing devices that enable communication between individuals using
technology, the significance of how the device relates to the user as an individual, rather than a
member of a collective, is of great importance. This paper draws on practice centered research
into the integration of digital technologies within contemporary jewellery and focuses on
opposing notions of jewelry and the gadget within the conception and design of wearable digital
communication devices.
The desire to make the human form the locus for digital devices is increasingly evident in
the proposals and developments of digital device designers. This motivation is often technology
led as a result of the increasing ubiquitous and miniaturized nature of computing and technology.
However, the body, as a site for interactive devices, has much wider possibilities. This paper
explores the contribution and perspective of Contemporary Jewelry in the design and conception
of wearable digital devices, reflecting the awareness of jewelers to the person/object relationship
and notions of personal significance.

Digital Jewelry
Randall White, professor of anthropology at New York University suggests that any
discovery of collective human coexistence can be described as a society if there is evidence of
jewellery in that collective. He states that "What people wear, and what they do to and with their
bodies in general, forms an important part of the flow of information - establishing, modifying,
and commenting on major social categories. This perspective provides a view of jewellery,
which establishes it as a defining signifier of society and the power relationships within it{1}.
There is evidence throughout history that objects have been worn or attached to the body
to symbolize status, difference and a way of asserting individualism. These first connections
between purpose and self-adornment form the precursors of what we now know as jewellery.
Traditionally jewellery has followed in these footsteps. It has been used to symbolize wealth,
social status and cultural positioning. However the power an object has, particularly one worn on
the body, to exemplify and express many broader concepts has advanced the medium of jewelry
from this traditional role [1].
IBM‟s design approach can be characterized as a 'problem solving' one, and has led to
solutions of equivalent quality to high street, commercial accessories, with a predictability of
form and function. Turning to jewellery because "if you have something with you all the time,
you might as well be able to wear it." shows a narrow interpretation of what jewellery is and a
naivety in this case of the problems which are in need of solving. In allowing function to lead the
concept the perceived issues or problems are potentially shallow and the resulting designs will
only echo this. The more important, significant problems of why such devices should be made,
or how such devices can enhance communication between people are not evident in these pieces.
Research and Development at Philips has produced concepts for the integration of
technology in our communities, homes and clothing. Philips is an example of a company with a
number of approaches to the design of digital devices. They take a user centered approach stating
"The traditional design disciplines are integrated with expertise from the human sciences and
technology through a multi-disciplinary, research-based approach that makes it possible to create
new solutions that satisfy and anticipate people's needs and aspirations.
Philips suggest that "As new technological developments advance they become better and
smaller as we use refined, miniaturized technology. But there are limits to miniaturization. It can
help make products smaller and easier to use, but the ultimate dream is not to have easier tools: it
is not to have to bother with tools at all! The step forward then is the integration of functions into

Digital Jewelry
objects that we do not feel clutters us, which are part of our life. Philips approach shows an
openness to form and mode of interaction, their proposed devices often suggest playful ways of
interacting with the systems, but in terms of wearable devices their suggestions echo qualities of
'products' rather than 'jewelry.
Product Design Company IDEO has produced proposals for wearable digital appliances,
which intimate notions of jewelry. The ideas consist of: Cell phone rings, where the ear piece
and mouth piece telephony are embedded in finger jewellery, 'Toe Jewelry', which facilitates
navigation around a city, through the use of satellites and a PDA power plant on a belt, a Sports
watch which supplies data of your performance, to upload to your PDA for analysis and a low
powered ear mounted phone. The forms still resemble products, rather than jewellery, but they
show a more imaginative interpretation of how to wear digital devices than many product design
companies.
As these examples illustrate, the majority of digital devices to date using the body as their
canvas and locus are from a functionalist led standpoint. Craft theorists such as Greenhalgh
(2002) discuss the relevance of technology for makers of craft objects and there is a recognisable
shift in the embrace of such notions. However there are very few contemporary jewelers going
beyond the expression of ideas and aesthetics attributed to digital technology in their work.
IDEO‟s Technojewelry proposals for digital jewelry include Cell phone, Rings, where the
ear piece and mouth piece are embedded in finger jewelry, and GPS Toes, toe rings which act as
directional indicators and are wirelessly connected to a GPS receiver kept in a bag or worn on a
belt. Elements of these designs show a more sensitive understanding of what it means to
integrate an object into your appearance by wearing it. Their focus on the hands and feet are
described by IDEO as: “non intrusive locations for useful innovations, these concepts prove that
new devices needn‟t look alien to your person and that we can make technology adapt to our
lifestyles rather than the other way around.”

Digital Jewelry
Fig 2.1: IDEO‟s Technojewelry
2.5 People and Their Awareness of Digital Jewelry
A survey was conducted for this purpose through social network (Facebook, Twitter)
Participants included: 138 people, age group 19-30, Male and Female. Our results concluded the
following-There are 106 people(77%) do not about digital jewelry, while there are 32 people
(23%) they may have heard or read about it. About 73% accept the idea of digital jewelry. The
most popular field used for Digital Jewelry is Intelligence. This is comparing with medical and
social fields.

Digital Jewelry
Chapter-3
TECHNICAL SPECIFICATIONS OF DIGITAL
JEWELRY
Digital jewelry devices consist of a screen or display for information, most likely
consisting of 7-16-segment, or dot matrix LEDs, LCDs, or other technologies such as
electroluminescent material (EL) or others, which could become an optional display.
So too, an audiovisual or other 'display' could consist of a speaker, a single flashing light,
a sensor of some kind (such as a temperature driven EL display), or other informational
aesthetic. The display layer sits on a face of the device, which is enclosed in some material such
as plastic, metal, crystal, or other material.
It has external switches and buttons on its side and a data-port for accessing the
programmable electronic circuit inside. A micro controller that is a surface mounted device
(SMD) on a printed circuit board (PCB) with resistors (R) and capacitors (C) are the internal
„guts' of the jewelry[1].

Digital Jewelry
3.1 Display Technologies
The digital jewelry display, for instance, every alphabet and number system has found
representation within the electronics realm and 'dot-matrix' (a matrix of single LEDs) is used to
display Chinese and Japanese and other character sets, as can the alternative display for LCDs
(liquid-crystal-displays) also be used, as often found in watches.
FIG 3.1: Alphanumeric or graphic display types
Digital Jewelry can be made in many different sizes and shapes with a variety of
materials ranging from plastic and metal to rubber and glass. They utilize electromagnetic
properties and electronics to display information through a screen or display of some kind. This
could range from LED 7-segment, 16-segment, dot matrix, and other programmable LEDs
devices to LCDs, OLEDs, and other displays, which are all driven by the self-contained jewelry
devices themselves[1].
A dot matrix is a 2-dimensional patterned array, used to represent characters, symbols
and images. Every type of modern technology uses dot matrices for display of information,
including cell phones, televisions, and printers. They are also used in textiles with sewing,
knitting, and weaving.
In printers, the dots are usually the darkened areas of the paper. In displays, the dots may
light up, as in an LED, CRT, or plasma display, or darken, as in an LCD. Although the output of
modern computers is generally all in the form of dot matrices (technically-speaking), computers
may internally store data as either a dot matrix or as a vector pattern of lines and curves. Vector
data encoding requires less memory and less data storage, in situations where the shapes may
need to be resized, as with font typefaces. For maximum image quality using only dot matrix
fonts, it would be necessary to store a separate dot matrix pattern for the many different potential

Digital Jewelry
point sizes that might be used. Instead, a single group of vector shapes is used to render all the
specific dot matrix patterns needed for the current display or printing task.
Sixteen-segment displays were originally designed to display alphanumeric characters
(Latin letters and Arabic digits). Later they were used to display Thai numerals and Persian
characters. Before the advent of inexpensive dot-matrix displays, sixteen and fourteen-segment
displays were some of the few options available for producing alphanumeric characters
on calculators and other embedded systems. However, they are still sometimes used
on VCRs, car stereos, microwave ovens, telephone Caller ID displays, and slot
machine readouts[2].
Sixteen-segment displays may be based on one of several technologies, the three most
common optoelectronics types being LED, LCD and VFD. The LED variant is typically
manufactured in single or dual character packages, to be combined as needed into text line
displays of a suitable length for the application in question
3.2 Electromagnetic Beads
The closest comparison to this model is that of 'beads' which are strung together to make
a custom necklace or bracelet, with interchangeable electromagnetic component systems or
devices. One bead may be a capacitor on the inside, and a solar panel on the outside.
Another bead may have an internal resistor which feed power into a programmed
microcontroller bead which drives an external screen, with other options available in a variety of
bead configurations which compose a circuit, including beads with a piezo element, voltage
regulator, crystal, or rechargeable battery as part of the modular jewel circuit [2].
The number of data pins on the microcontroller needs to be enough to easily program the
display layer plus the switches without overly complex and advanced coding methods. The key
to the device's ability to work effectively is a balancing of electronic components within the
circuit with a light-duty processing and limited power consumption required for the display (d)
layer.

Digital Jewelry
FIG 3.2: Electromagnetic Beads[1]
3.3 Prototypes of Digital Jewelry
FIG 3.3: Hiox Necklace
The figure 3.3 shows a complete HIOX necklace showing al 26 letters of roman alphabets
extended in 4-dimentional space lifetime. Metal with leather cord.

Digital Jewelry
FIG 3.4: Programmable HIOX Ring with 16-Segment LED Display
A Sixteen-Segment Display (SISD), sometimes called a "Union Jack" display or a
"British Flag" display is a type of display based on 16 segments that can be turned on or off
according to the graphic pattern to be produced. It is an extension of the more common seven-
segment display, adding four diagonal and two vertical segments and splitting the
three horizontal segments in half. Other variants include the fourteen-segment display which
splits only the middle horizontal segment[2].

Digital Jewelry
Chapter-4
THE JAVA RING
It seems that everything we access today is under lock and key. Even the devices we use
are protected by passwords. It can be frustrating trying to keep with all of the passwords and
keys needed to access any door or computer program.
Dallas Semiconductor is developing a new Java-based, computerized ring that will
automatically unlock doors and log on to computers.
FIG 4.1
(a)The Java Ring can be programmed to give you access to every door and device.
(b)DS9104 Digital Decoder[3]
For over 10years, Dallas semiconductor also has been designing, making and selling a
line of highly secure microprocessors are used in satellite TV descramblers, automatic teller
machines, point of sale terminals, and other similar applications requiring cryptographic security
and high resistance to attack by hackers. Postal Service's (USPS) Information Based Indicia
Program Postal Security Device Speciﬁcation, intended to permit printing of valid U.S. postage
on any PC, provided the ﬁrst opportunity to combine two areas of expertise when a secure
microprocessor was designed into an iButton the resulting product, named the Crypto iButton,
combines high processor performance and high-speed cryptographic primitives, and exceptional
protection against physical and cryptographic attacks of outsiders. An agreement between Dallas
Semiconductor and RSA Data Security Inc[4]. provides a paid-up license for anyone using the
Crypto iButton to perform RSA encryption and digital signatures so that no more further
licensing of the RSA encryption technology is required so far. High security is afforded by the
ability to erase the contents of NVRAM extremely quickly. This feature, rapid zeroization, is a

Digital Jewelry
requirement for high security devices that may be subjected to attacks by hackers. As a result of
its high security, the Crypto iButton is expected to win the FIPS 140-1 security certification by
the National Institute of Standards and Technology (N IST).A special operating system was
designed and stored in the ROM of the Crypto iButton to support cryptography and general-
purpose financial transactions -- such as those required by the Postal Service program. While not
a Java virtual machine, the Ecommerce firmware designed for this application had several points
of similarity with Java, including an object-oriented design and a byte code interpreter to
interpret and execute Dallas Semiconductor's custom-designed with the E-Commerce Script
language.[3]
The DS9104 Digital Decoder Ring is a portable database disguised as jewelry with the
DS1996 Memory iButton as signet. Data is transferred serially using the 1-Wire® protocol
through a simple interface. Data is first written to a scratchpad, verified, and then transferred to
NV memory. The 64-bit serial number guarantees that each ring is unique and traceable. The
ring communicates by touch through a parallel or serial port interface. Applications include
access control to buildings, doors, and computers and digitized storage of personal
information[4].
Note: Rings cannot be resized as the iButton will not withstand the high temperatures required.
The Java Ring, first introduced at JavaOne Conference, has been tested at Celebration
School, an innovative K-12 school just outside Orlando, FL. The rings given to students are
programmed with Java applets that communicate with host applications on networked systems.
Applets are small applications that are designed to be run within another application[3].
At Celebration School, the rings have been programmed to store electronic cash to pay
for lunches, automatically unlock doors, take attendance, store a student's medical information
and allow students to check out books. All of this information is stored on the ring's iButton.
Students simply press the signet of their Java Ring against the Blue Dot receptor, and the system
connected to the receptor performs the function that the applet instructs it to. In the future, the
Java Ring may start your car.

Digital Jewelry
4.1 Components of Java Ring
The Java Ring is a stainless-steel ring, 16-millimeters (0.6 inches) in diameter, which
houses a 1-million-transistor processor, called an iButton. The ring has 134 KB of RAM, 32 KB
of ROM, a real-time clock and a Java virtual machine, which is a piece of software that
recognizes the Java language and translates it for the user's computer system[4].
Digital jewelry, (designed to supplement the personal computer,) will be the evolution in
digital technology that makes computer elements entirely compatible with the human form.
Highlights of Java Ring
Runs Java better (plus portions enhance Java Card 2.0)
Careful attention to physical security (rapid zeroization)
Durability to stand up to everyday use
High memory capacity (up to 134K bytes NV SRAM)
Retail connectivity to 250 million existing computers (less if designed-in before
manufacturing)
FIG 4.2: Blue Dot Receptor
The Java Ring is snapped into a reader, called a Blue Dot receptor, to allow
communication between a host system and the Java Ring. iButton requires connection to a reader
known as a Blue Dot Receptor in order to be supplied with power and to receive input and send
output. The read/write operation will be done by this blue dot receptor provided by RS232 serial
port adaptor.
Receptor cable connects to the USB port of PC or any embedded system. The
information is transferred between the iButton and pc with momentary touching java ring.

Digital Jewelry
4.2 Working Of Java Ring
Since java ring is programmed with the applets and the programming is done according
to our application and this will specific for the specific user. All information of the user is stored
in the java ring.Figure 4.3 shows how java ring is used to open the door. User simply has to press
the signet of the java ring against the blue dot receptor and the system connected to the receptor
performs the function that the applets instruct it to.java ring has the user profile and the same
profile is present in the door embedded
Fig 4.3: Opening door using Java Ring
system also, when the user press the signet of the java ring against the java ring reader which is
embedded at the handle of the door the data is transferred from the ring to door system. if the
profile is authentic means user is authentic to open the door the applets president in the ring
instruct the door to open.
Information is transferred between iButton and a PC with a momentary contact, at up to
142K bits per second. To do that one presses iButton to the Blue Dot receptor, a 15 pipeline into
PC. The Blue Dot sticks to any convenient spot on the front of a PC and is cabled to the serial or
parallel port in the back[1].

Digital Jewelry
Figure 4.4 : Working process of Java Ring(Source: Java Card Technology)
According to the Dallas Superconductor‟s information, over 41 million iButtons are
currently in circulation. List of the major users include the U.S. Post Office, entire truck fleet
fitted with iButtons that track vehicle maintenance; Citizens of Istanbul, Turkey, who store
digital cash in the iButton, using the device as a small change purse on their mass transit system.
It was also said that the U.S. Postal service has approved.
Java ring is programmed with the applets according to our application. For specific class
of user specific java applets is preloaded in to the java ring. All the information of the user is
stored in the java ring. User simply presses the signet of the java ring against the “blue dot”
receptor and the system connected to the receptor performs the function that the applet instructs
to.
Java rings are authorized through Personal Identification Numbers (PINs) so that no one
can steal a person‟s ring and use that ring. The java ring provides very high degree of security for
the confidential data that is stored in the NVRAM memory[4].

Digital Jewelry
4.3 Operating System in Java Ring
A special operating system was designed and stored in the ROM of the Crypto iButton to
support cryptography and general-purpose financial transactions – such as those required by the
Postal Service program. While not a Java virtual machine, the E-Commerce firmware designed
for this application had several points of similarity with Java, including an object-oriented design
and a byte code interpreter to interpret and execute Dallas Semiconductor‟s custom-designed E-
Commerce Script Language [3].
A Compiler was also written to compile the high-level language representation of the
Script Language to a byte code form that could be interpreted by the E-Commerce VM.Although
the E-Commerce firmware was intended primarily for the USPS application, the firmware
supports a variety of general electronic commerce models that are suitable for many different
applications. The E-Commerce firmware also supports cryptographic Protocols for secure
information exchange such as the Simple Key-Management for Internet Protocol (SKIP)
developed by Sun Microsystems Inc.
4.4 Applications of Java Ring
Access control to buildings and equipment
Secure network login using challenge/response authentication
Storage vault for user names and passwords
User profile for rapid Internet form-filling
Digital signatures for e-commerce
United States Postal Service Postal Security Device for PC Postage downloadable over
the Internet.
Digital photo ID and fingerprint biometrics
Thermochron applications
4.5 Advantages
 Java ring is wearable.

Digital Jewelry
 Completely controlled by the user. Provides authentication to users which is crucial for
many applications. Easier for administrator to maintain the security infrastructure.
 Rapid Zeroization -zeroisation (also spelled zeroization) is the practice of erasing
sensitive parameters (electronically stored data, cryptographic keys, and CSPs) from a
cryptographic module to prevent their disclosure if the equipment is captured. This is
generally accomplished by altering or deleting the contents to prevent recovery of the
data.
 More secure than using passwords.
 Portable.
 Provides real memory, more power, and a capacity for dynamic programming.

Digital Jewelry
Chapter-5
APPLICATION, ACHIEVEMENTS, ADVANTAGES AND
LIMITATIONS
5.1 Application:
I. In Social Networking
The use of digital jewellery in the areas of social communication help to easy
communication between users as well as help to interact and respond faster as it helps to
share the latest information around the world then the digital jewelry helps rapid response
and high efficiently.
You can communicate with your friends, family, as your need as effective way.
II. In Personal Field
The java ring help the employee in the companies to reminder the time of the meeting by
saving the date on this ring(Rings can notify for not only phones, it may include email
and messages or any other kind of notification) , or to communicate with other stuff
easily by using the other component of the jewelry eg: Earrings, Necklace…etc
III. In Intelligence Field
Digital jewelry can be used to adjust the Security Council, where it is considered a
modern method and easy to use in the transfer of information in a more secure and
confidential due to their small size and used it on a personal level.
IV. In Medical Fields
That the use of jewelry digital in the medical field a big impact at facilitating their career
where it‟s become a means of: communication very easy between the patient and the
doctor or the medical staff as a whole, used in follow-up patients and outside the hospital
easily, the patient can communicate with his doctor with ease, whether in the hospital or
at home as well as at the medical level they.

Digital Jewelry
5.2 Ongoing achievements:
Charmbadge
Intelligent Spectacles
Smart Wrist Watch
Magic Decoder ring
Charmed Communicator Eyepiece
Mouse Ring
5.3 Advantages
It provides SECURITY.
For example, JAVA RING is used to lock or unlock doors or computers. As we
use passwords and keys to lock our doors and computers. We don‟t need to
remember all those passwords and carry all those keys. So java ring is designed to
provide security.
It is easy to carry everywhere.
As COMPUTING DEVICES are embedded, it is not necessary to carry CELLS or
COMPUTERS it is not necessary to carry CELLS or COMPUTERS.
5.4 Limitations
Charging capabilities and cost are the sample of problems.
Display is very small
Rays may be harmful

Digital Jewelry
CONCLUSION
Fig: Digital Watch
The basic idea behind the digital jewelry concept is to have the convenience of wireless,
wearable computers while remaining fashionably sound. The combination of shrinking computer
devices and increasing computer power has allowed several companies to begin producing
fashion jewelry with embedded intelligence. Today, manufacturers can place millions of
transistors on a microchip, which can be used to make small devices that store tons of digital
data. Researchers have already created an array of digital-jewelry prototypes. "We've made one
of almost everything except tongue rings," says Dan Russell, senior manager of IBM's Almaden
Research Lab, where IBM is developing digital-jewelry technology[1].
Russell says that digital jewelry is the beginning of the disintegration of the personal
computer into tiny pieces. It is hoped to be marketable soon, however, several bugs remain.
Charging capabilities and cost are just a sample of the problems that lurk [1].
The role posited, through this research, of a contemporary jeweler is not how to add an
aesthetic to a technology, or how you wear something, but that a jeweler can force much bigger
questions and issues, which involves questioning motivations, relevances, and forms of digital
appliances and interaction. As a result of this next phase the aim is to use the findings to develop
a reflective review of the researcher's own practice.

Digital Jewelry
The research will generate empirical data for mainly qualitative analysis. In this way the
activities will inform one another and allow refinement and development of the research
methodology and in turn the researcher's own practice. It is anticipated that the research will test
the appropriateness of Contemporary Jewellery as a creative strategy in the further development
of such technologies.
Furthermore it will define new design methodologies, which will bridge the roles of
Designer and Jeweler. If successful this research will enhance the relevance of Contemporary
Jewellery and establish its value as a source of knowledge in a post-industrial age. The
researcher will produce a thesis and a series of jewellery objects, which will be presented in the
form of one or more exhibitions, which will address the issue of transparency and
communication of content. As stated by Professor Randall White Jewellery is a defining
signifier, it was in the Middle-Upper Paleolithic age and this research can demonstrate that it still
is today.
The purpose of having digital jewelry is to use the different technologies provided in
computers or other devices in a smaller easy to carry device. we have went so far down that road
with all the existing digital jewelry. However, the future is wide open for any new ideas in that
field to make our lives much easier .New combinations of this sort may change our everyday
tasks to make it simpler, thus saving our time money and energy.

Digital Jewelry
BIBLIOGRAPHY
Books:
1. Mobile Communications --Jochen Schiller
2. Bluetooth Connect without Cables--Jennifer Bray and Charles F Sturman
3. Cellular & Mobile Communications-- LEE
Web:
[1]www.IBM.com
[2]www.howstuffworks.com
[3]www.infoworld.com
[4]www.ibutton.com

Final digital jewelry report

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (20)

Ähnlich wie Final digital jewelry report

Ähnlich wie Final digital jewelry report (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Final digital jewelry report