spintronics seminar report

1. A
Seminar
Report On
“Spintronics Technology”
Session 2010-2011
Submitted To: Submitted By:
Dr. R.S. Meena Shailendra Kumar Singh
Mr. Pankaj Shukla C.R.No. 07/126
Dept. of Electronics Engg. Final Year, ECE
UCE, RTU, Kota UCE, RTU, Kota
Department of Electronics and Communication Engg.
University College of Engineering
Rajasthan Technical University, Kota
Page 1

2. CERTIFICATE
This is certify that the Seminar report titled “Spintronics Technology”
has been submitted in partial fulfilment of the requirement for the award
of Bachelor of Technology in Electronics & Communication Engineering
by following student of final year B.Tech.
Shailendra Kumar Singh
C.R.No:- 07/126
B.TECH. FINAL YEAR
UCE, RTU, KOTA
Seminar Coordinators: Head of the Department:
Dr R S Meena & Mr Pankaj Shukla Dr Rajeev Gupta
(Associate Professors) Professor
Dept. Of Electronics Engg. Dept. Of Electronics Engg.
UCE, RTU, Kota UCE, RTU, Kota
Page 2

3. ACKNOWLEDGEMENT
It gives me great pleasure to present my seminar report on “Spintronics
Technology”. No work , however big or small, has ever been done without the
contributions of others.
It would be a great pleasure to write a few words, which would although not
suffice as the acknowledgement of this long cherished effort, but in the absence of which
this report would necessarily be incomplete. So these words of acknowledgement come
as a small gesture of gratitude towards all those people, without whom the successful
completion of this project would not have been possible.
I would like to express deep gratitude towards Dr. R S Meena (Associate
Professor of Electronics Engineering Dept., UCE, Kota) & Mr. Pankaj Shukla
(Associate Professor of Electronics Engineering Dept., UCE, Kota) who gave me
their valuable suggestions, motivation and the direction to proceed at every stage.They
are like a beam of light for us. Their kind guidance showed us the path of life and is
unforgettable. They extended towards their valuable guidance, indispensable help and
inspiration at times in appreciation I offer them my sincere gratitude.
Last but not least we would like to thank the Department of Electronics
Engineering, UCE, Kota for providing me with the facilities to lab, and all staff members of
communication lab, it would have been impossible for me to complete my project without
their valuable guidance & prompt cooperation.
I have tried my level best to make this seminar report error free ,but I regret for
errors , if any.
SHAILENDRA KUMAR SINGH
C.R.NO. - 07/126
B. TECH. FINAL YEAR, ECE
UCE, RTU, KOTA
Page 3

4. CONTENTS
S. No Chapters Page No
1. Introduction 07
2. Basic Principle 08
3. Gaint Magnetoresistance 10
4. Construction of GMR 12
5. Memory Chips 14
6. GMR Sensors 15
7. Spin Valve GMR 16
8. Spintronic Devices 17
9. MRAM 18
10. Spin Transistors 19
11. Spintronic Scanner 22
12. Conclusion 26
13. Reference 27
Page 4

5. List of Figures
S No. Figure Name Page No.
1. Electron spinning 08
2. Magnetic Orientation of electrons. 09
3. A GMR read head 10
4. A GMR Device 13
5. A General Magnetic Field Sensor 14
6. Spintronic Sensor 15
7. Standard Geometry for GMR based Spin Valves 16
8. GMR based Spin Valves for read head In hard drives 16
9. 256 K MRAM 18
10. Spin Transistor 19
11. Spin Polarised Field Effect Transistor 20
Page 5

6. ABSTRACT
Spintronics is an emergent technology that exploits the quantum propensity of the
electrons to spin as well as making use of their charge state. The spin itself is manifested as a
detectable weak magnetic energy state characterised as ―spin up‖ or ―spin down‖.
Conventional electronic devices rely on the transport of electrical charge carriers –
electrons – in a semiconductor such as silicon. Now, however, device engineers and physicists are
inevitably faced the looming presence of quantum mechanics and are trying to exploit the spin of
the electron rather than its charge. Devices that rely on the electron‘s spin to perform their
functions form the foundations of spintronics (short for spin-based electronics), also known as
magnetoelectronics. Spintronics devices are smaller than 100 nanometre in size, more versatile and
more robust than those making up silicon chips and circuit elements. The potential market is worth
hundreds of billions of dollar a year.
Spintronics burst on the scene in 1988 when French and German physicists discovered
a very powerful effect called Giant Magnetoresistance (GMR). It results from subtle electron-spin
effects in ultra thin multilayers of magnetic materials, which cause huge changes in their electrical
resistance when a magnetic field is applied. This resulted in the first spintronic device in the form
of the spin valve. The incorporation of GMR materials into read heads allowed the storage capacity
of a hard disk to increase from one to 20 gigabits. In 1997, IBM launched GMR read heads, into a
market worth around a billion dollars a year.
The field of spintronics is relatively young and it is difficult to predict how it will
evolve. New physics is still being discovered and new materials being developed, such as magnetic
semiconductors and exotic oxides that manifest an even more extreme effect called Colossal
Magnetoresistance.
Page 6

7. Chapter 1
INTRODUCTION
Conventional electronic devices rely on the transport of electrical charge carriers –electrons in a
semiconductor such as silicon. Now, however, physicists are trying to exploit the ‗spin‘ of the
electron rather than its charge to create a remarkable new generation of ‗spintronic‘ devices
which will be smaller, more versatile and more robust than those currently making up silicon
chips and circuit elements.
Imagine a data storage device of the size of an atom working at a speed of light. Imagine a
computer memory thousands of times denser and faster than today‘s memories and also imagine
a scanner technique which can detect cancer cells even though they are less in number. The
above-mentioned things can be made possible with the help of an exploding science –
―Spintronics‖.
Spintronics is a technology which deals with spin dependent properties of an electron instead of
or in addition to its charge dependent properties. Conventional electronics devices rely on the
transport of electric charge carries-electrons. But there is other dimensions of an electron other
than its charge and mass i.e. spin. This dimension can be exploited to create a remarkable
generation of spintronic devices. It is believed that in the near future spintronics could be more
revolutionary than any other technology.
As there is rapid progress in the miniaturization of semiconductor electronic devices leads to a
chip features smaller than 100 nanometers in size, device engineers and physicists are inevitable
faced with a looming presence of a quantum property of an electron known as spin, which is
closely related to magnetism. Devices that rely on an electron spin to perform their functions
form the foundations of spintronics.
Information-processing technology has thus far relied on purely charge based devices ranging
from the now quantum, vacuum tube today‘s million transistor microchips. Those conventional
electronic devices move electronic charges around, ignoring the spin that tags along that side on
each electron.
Page 7

8. Chapter 2
BASIC PRINCIPLE
The basic principle involved is the usage of spin of the electron in addition to mass and charge of
electron. Electrons like all fundamental particles have a property called spin which can be
orientated in one direction or the other – called ‗spin-up‘ or ‗spin-down‘ –like a top spinning
anticlockwise or clockwise. Spin is the root cause of magnetism and is a kind of intrinsic angular
momentum that a particle cannot gain or lose. The two possible spin states naturally represent
‗0‘and ‗1‘in logical operations. Spin is the characteristics that makes the electron a tiny magnet
complete with north and south poles .The orientation of the tiny magnet ‗s north-south poles
depends on the particle‘s axis of spin.
Fundamentals of spin:
1. In addition to their mass, electrons have an intrinsic quantity of angular momentum
called spin, almost of if they were tiny spinning balls.
2. Associated with the spin is magnetic field like that of a tiny bar magnet lined up with
the spin axis.
.
Fig.1. Electron spinning
2. Scientists represent the spin with a vector. For a sphere spinning ―west to east‖, the
vector points ―north‖ or ―up‖. It points ―south‖ or ―down‖ for the spin from ―east to
west‖.
4. In a magnetic field, electrons with ―spin up‖ and ―spin down‖ have different energies.
5. In an ordinary electronic circuit the spins are oriented at random and have no effect
on current flow.
Page 8

9. 6. Spintronic devices create spin-polarized currents and use the spin to control current
flow.
Imagine a small electronically charged sphere spinning rapidly. The circulating charges in the
sphere amount to tiny loops of electric current which creates a magnetic field. A spinning sphere
in an external magnetic field changes its total energy according to how its spin vector is aligned
with the spin. In some ways, an electron is just like a spinning sphere of charge, an electron has a
quantity of angular momentum (spin) an associated magnetism. In an ambient magnetic field and
the spin changing this magnetic field can change orientation. Its energy is dependent on how its
spin vector is oriented. The bottom line is that the spin along with mass and charge is defining
characteristics of an electron. In an ordinary electric current, the spin points at random and plays
no role in determining the resistance of a wire or the amplification of a transistor circuit.
Spintronic devices in contrast rely on the differences in the transport of spin-up and spin-down
electrons.
Fig 2. Magnetic Orientation of electrons
Page 9

10. Chapter 3
Giant Magnetoresistance
Electrons like all fundamental particles have a property called spin which can
be orientated in one direction or the other – called „spin-up‟ or „spin-down‟ – like a top
spinning anticlockwise or clockwise. When electron spins are aligned (i.e. all spin-up or all
spin-down) they create a large-scale net magnetic moment as seen in magnetic materials
like iron and cobalt. Magnetism is an intrinsic physical property associated with the spins
of electrons in a material.
Magnetism is already exploited in recording devices such as computer hard
disks Data are recorded and stored as tiny areas of magnetised iron or chromium oxide.
To access the information, a read head detects the minute changes in magnetic field as
the disk spins underneath it. This induces corresponding changes in the head‟s electrical
resistance – an effect called magnetoresistance.
Spintronics burst on the scene in 1988 when French and German physicists
discovered a much more powerful effect called „giant magnetoresistance‟ (GMR). It results
from subtle electron-spin effects in ultra-thin „multilayers‟ of magnetic materials, which
cause huge changes in their electrical resistance when a magnetic field is applied. GMR is
200 times stronger than ordinary magnetoresistance. IBM soon realised that read heads
incorporating GMR materials would be able to sense much smaller magnetic fields,
allowing the storage capacity of a hard disk to increase from 1 to 20 gigabits. In 1997 IBM
launched GMR read heads, into a market worth about a billion dollars a year.
The basic GMR device consistsmof a three-layer sandwich of a magnetic metal
such as cobalt with a nonmagnetic metal filling such as silver (see diagram).
A current passes through the layers consisting of spin-up and spin-down electrons. Those
oriented in the same direction as the electron spins in a magnetic
layer pass through quite easily while those oriented in the opposite direction are
scattered. If the orientation of one of the magnetic layers can easily be changed by the
presence of a magnetic field then the device will act as a filter, or „spin valve‟, letting
through more electrons when the spin orientations in the two layers are the same and
fewer when orientations are oppositely aligned. The electrical resistance of the device can
therefore be changed dramatically.
Fig 3. A GMR read head
Page 10

11. Magnetism is the integral part of the present day‘s data storage techniques. Right from the
Gramophone disks to the hard disks of the super computer magnetism plays an important role.
Data is recorded and stored as tiny areas of magnetized iron or chromium oxide. To access the
information, a read head detects the minute changes in magnetic field as the disk spins
underneath it. In this way the read heads detect the data and send it to the various succeeding
circuits.
The effect is observed as a significant change in the electrical resistance depending on whether
the magnetization of adjacent ferromagnetic layers are in a parallel or anantiparallel alignment.
The overall resistance is relatively low for parallel alignment and relatively high for antiparallel
alignment.
The magneto resistant devices can sense the changes in the magnetic field only to a small extent,
which is appropriate to the existing memory devices. When we reduce the size and increase data
storage density, we reduce the bits, so our sensor also has to be small and maintain very, very
high sensitivity. The thought gave rise to the powerful effect called ―Giant Magnetoresistance‖
(GMR). GMR is a quantum mechanical magnetoresistance effect observed in thin film structures
composed of alternating ferromagnetic and non magnetic layers. The 2007 Nobel Prize in
physics was awarded to Albert Fert and Peter Grünberg for the discovery of GMR.
Giant magnetoresistance (GMR) came into picture in 1988, which lead the rise of spintronics. It
results from subtle electron-spin effects in ultra-thin ‗multilayer‘ of magnetic materials, which
cause huge changes in their electrical resistance when a magnetic field is applied. GMR is 200
times stronger than ordinary magnetoresistance. It was soon realized that read heads
incorporating GMR materials would be able to sense much smaller magnetic fields, allowing the
storage capacity of a hard disk to increase from 1 to 20 gigabits.
Page 11

12. Chapter 4
Construction of GMR
The basic GMR device consists of a three-layer sandwich of a magnetic metal such as cobalt
with a nonmagnetic metal filling such as silver. Current passes through the layers consisting of
spin-up and spin-down electrons. Those oriented in the same direction as the electron spins in a
magnetic layer pass through quite easily while those oriented in the opposite direction are
scattered. If the orientation of one of the magnetic layers can easily be changed by the presence
of a magnetic field then the device will act as a filter, or ‗spin valve‘, letting through more
electrons when the spin orientations in the two layers are the same and fewer when orientations
are oppositely aligned. The electrical resistance of the device can therefore be changed
dramatically. In an ordinary electric current, the spin points at random and plays no role in
determining the resistance of a wire or the amplification of a transistor circuit. Spintronic devices
in contrast, rely on differences in the transport of ―spin up‖ and ―spin down‖ electrons. When a
current passes through the Ferro magnet, electrons of one spin direction tend to be obstructed.
A ferromagnet can even affect the flow of a current in a nearby nonmagnetic metal. For example,
in the present-day read heads in computer hard drives, wherein a layer of a nonmagnetic metal is
sandwiched between two ferromagnetic metallic layers, the magnetization of the first layer is
fixed, or pinned, but the second ferromagnetic layer is not. As the read head travels along a track
of data on a computer disk, the small magnetic fields of the recorded 1‘s and 0`s change the
second layer‘s magnetization back and forth parallel or antiparallel to the magnetization of the
pinned layer. In the parallel case, only electrons that are oriented in the favored direction flow
through the conductor easily. In the antiparallel case, all electrons are impeded. The resulting
changes in the current allow GMR read heads to detect weaker fields than their predecessors; so
that data can be stored using more tightly packaged magnetized spots on a disk.
GMR has triggered the rise of a new field of electronics called spintronics which has been used
extensively in the read heads of modern hard drives and magnetic sensors. A hard disk storing
binary information can use the difference in resistance between parallel and antiparallel layer
alignments as a method of storing 1s and 0s.
A high GMR is preferred for optimal data storage density. Current perpendicular-to-plane
(CPP) Spin valve GMR currently yields the highest GMR. Research continues with older
current-in-plane configuration and in the tunnelling magnetoresistance (TMR) spin valves which
enable disk drive densities exceeding 1 Terabyte per square inch.
Page 12

13. Hard disk drive manufacturers have investigated magnetic sensors based on the colossal
magnetoresistance effect (CMR) and the giant planar Hall effect. In the lab, such sensors have
demonstrated sensitivity which is orders of magnitude stronger than GMR. In principle, this
could lead to orders of magnitude improvement in hard drive data density. As of 2003, only
GMR has been exploited in commercial disk read-and-write heads because researchers have not
demonstrated the CMR or giant planar hall effects at temperatures above 150K.
Magnetocoupler is a device that uses giant magnetoresistance (GMR) to couple two electrical
circuits galvanicly isolated and works from AC down to DC.
Vibration measurement in MEMS systems.
Detecting DNA or protein binding to capture molecules in a surface layer by measuring the stray
field from superparamagnetic label particles.
Fig 4. A GMR Device
Page 13

14. Chapter 5
Memory Chips
Physicists have been quick to see the further possibilities of spin valves. Not
only are they highly sensitive magnetic sensors (see Box), they can also be made to act
as switches by flipping the magnetisation in one of the layers. This allows information to
be stored as 0s and 1s (magnetisations of the layers parallel or antiparallel) as in a
conventional transistor memory device. An obvious application is a magnetic version of a
random access memory (RAM) device of the kind used in your computer. The advantage
of magnetic random access memory (MRAM) is that it is „non-volatile‟ – information isn‟t
lost when the system is switched off. MRAM devices would be smaller, faster, cheaper,
use less power and would be much more robust in extreme conditions such as high
temperature, or highlevel radiation or interference. The US electronics company
Honeywell has already shown that arrays of linked MRAMS could be made to work. The
potential market for MRAMS is worth 100 billion dollars annually.
Over the past three years or so, researchers around the world have been
working hard on a whole range of MRAM devices. A particularly promising device is the
magnetic tunnel junction, which has two magnetic layers separated by an insulating metal-
oxide layer. Electrons can „tunnel‟ through from one layer to the other only when
magnetisations of the layers point in the same direction, otherwise the resistance is high –
in fact, 1000 times higher than in the standard spin valve.
Even more interesting are devices that combine the magnetic layers with semiconductors
like silicon. The advantage is that silicon is still the favourite material of the electronics
industry and likely to remain so. Such hybrid devices could be made to behave more like
conventional transistors. They could be used as non-volatile logic elements which could
be reprogrammed using software during actual processing to create an entirely new type
of very fast computing. The field of spintronics is extremely young and it‟s difficult to
predict how it will evolve. New physics is still being discovered and new materials being
developed, such as magnetic semiconductors, and exotic oxides that manifest an even
more extreme effect called colossal magnetoresistance. What is certain is that the time-
span from a breakthrough in fundamental physics to first commercial exploitation has
been less than 10 years. The business opportunities for spintronics are still wide open.
European research collaborations, some involving the UK, have a strong lead in
developing the underlying physics and technology for this lucrative fledgling industry.
Fig 5.
A general magnetic field sensor
made of GMR multilayers
( iron-nickel with silver )
Page 14

15. Chapter 6
GMR SENSORS
GMR sensors are already being developed in UK universities. They have a wide range
of applications and the market is worth 8 billion dollars a year. Applications include:
• Fast accurate position and motion sensing of mechanical components in precision engineering
and in robotics
• All kinds of automotive sensors for fuel handling systems, electronic engine control, antiskid
systems, speed control and navigation
• Missile guidance
• Position and motion sensing in computer video games
• Key-hole surgery and post-operative care
Fig 6. Spintronic sensor technology being
tested on a Mercedes V8 engine at Oxford
Page 15

16. Chapter 7
Spin Valve GMR
If the orientation of one of the magnetic layers can easily be changed by the presence of a
magnetic field then the device will act as a filter, or ‗spin valve‘, letting through more electrons
when the spin orientations in the two layers are the same and fewer when orientations are
oppositely aligned. The electrical resistance of the device can therefore be changed dramatically.
Fig 7. Standard geometry for GMR based Spin Valves
An electron passing through the spin-valve will be scattered more if the spin of the electron is
opposite to the direction of the magnetisation in the FM layer.
Fig 8. GMR based Spin Valves for read head in hard drives
Page 16

17. Chapter 8
Spintronic Devices
Spintronic devices are those devices which use the Spintronic technology. Spintronic-devices
combine the advantages of magnetic materials and semiconductors. They are expected to be non-
volatile, versatile, fast and capable of simultaneous data storage and processing, while at the
same time consuming less energy. Spintronic-devices are playing an increasingly significant role
in high-density data storage, microelectronics, sensors, quantum computing and bio-medical
applications, etc.
Electronic Devices Spintronic devices
1. Based on properties of charge of the 1. Based on intrinsic property spin of electron.
electron
2. Classical property 2. Quantum property
4. Materials: conductors and semiconductors 4. Materials: ferromagnetic materials
5. Based on the number of charges and their 5. Two basic spin states; spin-up and spindown.
energy
6. Speed is limited and power dissipation is 6. Based on direction of spin and spin and spin
high coupling, high speed.
Some of the Spintronic devices are:
 Magnetoresistive Random Access Memory(MRAM)
 Spin Transistor
 Quantum Computer
 Spintronic Scanner
Page 17

18. Chapter 9
MRAM (Magnetoresistive Random Access Memory)
An important spintronic device, which is supposed to be one of the first
spintronic devices that have been invented, is MRAM.
Unlike conventional random-access, MRAMs do not lose stored information
once the power is turned off...A MRAM computer uses power, the four page e mail will be
right there for you. Today pc use SRAM and DRAM both known as volatile memory. They
can store information only if we have power. DRAM is a series of
capacitors, a charged capacitor represents 1 where as an uncharged capacitor represents 0. To
retain 1 you must constantly feed the capacitor with power because the charge you put into the
capacitor is constantly leaking out.
MRAM is based on integration of magnetic tunnel junction (MJT). Magnetic tunnel junction is a
three-layered device having a thin insulating layer between two metallic ferromagnets. Current
flows through the device by the process of quantum tunneling; a small number of electrons
manage to jump through the barrier even though they are forbidden to be in the insulator. The
tunneling current is obstructed when the two ferromagnetic layers have opposite orientations and
is allowed when their orientations are the same. MRAM stores bits as magnetic polarities rather
than electric charges. When a big polarity points in one direction it holds1, when its polarity
points in other direction it holds 0. These bits need electricity to change the direction but not to
maintain them. MRAM is non volatile so, when you turn your computer off all the bits retain
their 1`s and 0`s.
Fig 9. 256 K MRAM
Page 18

19. Chapter 10
SPIN TRANSISTORS
Traditional transistors use on-and-off charge currents to create bits- the binary zeroes and ones of
computer information. “Quantum spin field effect” transistor will use up-and-down spin states to generate
the same binary data. One can think of electron spin as an arrow; it can point upward or downward; “spinup
and spin-down can be thought of as a digital system, representing the binary 0 and 1. The quantum
transistor employs also called “spin-flip” mechanism to flip an up-spin to a downspin, or change the binary
state from 0 to 1.
One proposed design of a spin FET (spintronic field-effect transistor) has a source and a drain, separated
by a narrow semi conducting channel, the same as in a conventional FET. In the spin FET, both the source
and the drain are ferromagnetic. The source sends spin-polarized electrons in to the channel, and this spin
current flow easily if it reaches the drain unaltered (top). A voltage applied to the gate electrode produces an
electric field in the channel, which causes the spins of fastmoving electrons to process, or rotate (bottom). The
drain impedes the spin current according to how far the spins have been rotated. Flipping spins in this way
takes much less energy and is much faster than the conventional FET process of pushing charges out of the
channel with a larger electric filed.
Fig 10.
In these devices a non magnetic layer which is used for transmitting and controlling the spin
polarized electrons from source to drain plays a crucial role. For functioning of this device first
the spins have to be injected from source into this non-magnetic layer and then transmitted to the
collector. These non-magnetic layers are also called as semimetals, because they have very large
spin diffusion lengths. The injected spins which are transmitted through this layer start
precessing as illustrated in Figure before they reach the collector due to the spin-orbit coupling
effect.
Page 19

20. Vgg
Collector gate Source
InAlAs
InGaAs
Fig.11 Spin polarized field effect transistor.
Vg is the gate voltage. When Vg is zero the injected spins which are transmitted through the
2DEG layer starts processing before they reach the collector, thereby reducing the net spin
polarization. Vg is the gate voltage. When Vg >> 0 the precession of the electrons is controlled
with electric filed thereby allowing the spins to reach at the collector with the same polarization.
Hence the net spin polarization is reduced. In order to solve this problem an electric field is
applied perpendicularly to the plane of the film by depositing a gate electrode on the top to
reduce the spin-orbit coupling effect as illustrated in Figure 4. By controlling the gate voltage
and polarity can the current in the collector can be modulated there by mimicking the MOSFET
of the conventional electronics. Here again the problem of conductivity mismatch between the
source and the transmitting layer is an important issue. The interesting thing would be if a
Heusler alloy is used as the spin source and a semimetallic Heusler alloy as the transmitting
layer, the problem of conductivity mismatch may be solved. For example from the Slater-Pauling
curve Mt = Zt - 24, Heusler alloys with Mt >>0 can act as spin sources and alloys with Mt ~ 0
can act as semimetals. Since both the constituents are of same structure the possibility of
conductivity mismatch may be less.
Traditional transistors use on-and-off charge currents to create bits—the binary zeroes and ones
of computer information. ―Quantum spin field effect‖ transistor will use up-and-down spin states
to generate the same binary data. One can think of electron spin as an arrow; it can point upward
or downward; ―spin-up and spin-down can be thought of as a digital system, representing the
Page 20

21. binary 0 and 1. The quantum transistor employs also called ―spin-flip‖ mechanism to flip an up-
spin to a downspin, or change the binary state from 0 to 1.
One proposed design of a spin FET (spintronic field-effect transistor) has a source and a drain,
separated by a narrow semi conducting channel, the same as in a conventional FET.
In the spin FET, both the source and the drain are ferromagnetic. The source sends spin-
polarized electrons in to the channel, and this spin current flow easily if it reaches the drain
unaltered (top). A voltage applied to the gate electrode produces an electric field in the channel,
which causes the spins of fast-moving electrons to process, or rotate (bottom). The drain impedes
the spin current according to how far the spins have been rotated. Flipping spins in this way takes
much less energy and is much faster than the conventional FET process of pushing charges out
of the channel with a larger electric filed.
One advantage over regular transistors is that these spin states can be detected and altered
without necessarily requiring the application of an electric current. This allows for detection
hardware that are much smaller but even more sensitive than today's devices, which rely on
noisy amplifiers to detect the minute charges used on today's data storage devices. The potential
end result is devices that can store more data in less space and consume less power, using less
costly materials. The increased sensitivity of spin transistors is also being researched in creating
more sensitive automotive sensors, a move being encouraged by a push for more
environmentally-friendly vehicles
A second advantage of a spin transistor is that the spin of an electron is semi-permanent and can
be used as means of creating cost-effective non volatile solid state storage that does not require
the constant application of current to sustain. It is one of the technologies being explored for
Magnetic Random Access Memory (MRAM)
Spin transistors are often used in computers for data processing. They can also be used to
produce a computer's random access memory and are being tested for use in magnetic RAM.
This memory is superfast and information stored on it is held in place after the computer is
powered off, much like a hard disk.
Page 21

22. Chapter 11
Spintronic Scanner
Cancer cells are the somatic cells which are grown into abnormal size.
The Cancer cells have different electromagnetic sample when compared to normal cells. For
many types of Cancer, it is easier to treat and cure the Cancer if it is found early. There are
many different types of Cancer, but most Cancers begin with abnormal cells growing out of
control, forming a lump that's called a tumor. The tumor can continue to grow until the Cancer
begins to spread to other parts of the body. If the tumor is found when it is still very small,
curing the Cancer can be easy. However, the longer the tumor goes unnoticed, the greater the
chance that the Cancer has spread. This makes treatment more difficult. Tumor developed in
human body, is removed by performing a surgery. Even if a single cell is present after the
surgery, it would again develop into a tumor. In order to prevent this, an efficient route
for detecting the Cancer cells is required. Here, in this paper, we introduce a new route for
detecting the Cancer cells after a surgery. This accurate detection of the existence of Cancer
cells at the beginning stage itself entertains the prevention of further development of the tumor.
This spintronic scanning technique is an efficient technique to detect cancer cells even when they
are less in number.
An innovative approach to detect the cancer cells with the help of Spintronics:
The following setup is used for the detection of cancer cells in a human body:
(a) Polarized electron source
(b) Spin detector
(c) Magnetic Field
Polarized electron source:
A beam of electrons is said to be polarized if their spins point, on average, in a specific direction.
There are several ways to employ spin on electrons and to control them. The requirement for this
paper is an electron beam with all its electrons polarized in a specific direction. The following
are the ways to meet the above said requirement: Photoemission from negative electron affinity
GaAs Chemi-ionization of optically pumped meta stable Helium An optically
pumped electron spin filter A Wein style injector in the electron source A spin filter is more
efficient electron polarizer which uses an ordinary electron source along with a gaseous layer of
Page 22

23. Rb. Free electrons diffuse under the action of an electric field through Rb vapour that has been
spin polarized in optical pumping. Through spin exchange collisions with the Rb, the free
electrons become polarized and are extracted to form a beam. To reduce the emission of
depolarizing radiation, N2 is used to quench the excited Rb atoms during the optical pumping
cycle.
Spin detectors:
There are many ways by which the spin of the electrons can be detected efficiently. The spin
polarization of the electron beam can be analyzed by using:
(a)Mott polarimeter
(b)Compton polarimeter
(c)Moller type polarimeter
Typical Mott polarimeters require electron energies of ~100 kV. But Mini Mott polarimeter uses
energies of ~25 keV, requiring a smaller overall design. The Mini Mott polarimeter
has three major sections: the electron transport system, the target chamber, and the detectors. The
first section the electrons enter is the transport system. An Einsel lens configuration was used
here. Two sets of four deflectors were used as the first and last lens. The electrons next enter the
target chamber. The chamber consists of a cylindrical target within a polished stainless steel
hemisphere. A common material used for the high-Z nuclei target is gold. Low-Z nuclei help
minimize unwanted scattering, so aluminum was chosen. Scattered electrons then exit the target
chamber and are collected in the detectors. Thus there are many methods for detecting the spin
polarization of electrons.
External Magnetic Field:
An external magnetic field is required during this experiment. The magnetic field is applied after
the surgery has undergone. First, it is applied to an unaffected part of the body and then to the
surgery undergone part of the body. It is already mentioned that the magnetic field could easily
alter the polarization of electrons.
Page 23

24. This technique using spintronics is suggested by us to identify tumor cells after surgery.
The procedure for doing this experiment is as follows:
Optical Spin Filter:
After surgery and the removal of the tumor, the patient is exposed to a strong magnetic field.
Now the polarized electron beam is applied over the unaffected part and spin orientation of
electrons are determined using polarimeter. Then the same polarized beam is targeted over the
affected part of the body and from the reflected beam, change in spin is determined. Based on
these two values of spin orientation, the presence of tumor cells can be detected even if they are
very few in number. Hence, we suggest this method for the detection purpose. A detailed view of
this innovative approach is given as follows.
Spin Orientation of the unaffected part of the body:
Applying Magnetic Field:
When the magnetic field is applied to the unaffected part of the human body, the normal somatic
cells absorbs the magnetic energy and retains it.
Determinig the Spin orientation:
When the electrons get incident on the cells the magnetic energy absorbed by the cells alters the
spin orientation of the electrons. These electrons get reflected and it is detected by the Mott
polarimeter. Then the change in spin orientation of the electrons is measured as Sx.
Spin Orientation of the surgery undergone part of the body:
Applying Magnetic Filter:
In the surgery undergone part of the body an external magnetic field is applied. The cancer cells
which are present, if any, will absorb more magnetic energy than the normal cells since they
differ in their electromagnetic pattern.
Determinig the spin Orientation:
Now an electron beam which is polarized is incident on the surgery undergone part of the body.
The magnetic energy absorbed by the cancer cell alter the spin orientation of the electron beam.
Since cancer cells absorb more magnetic energy, the change in orientation caused by them is also
more. If no cancer cells are present the amount of change is equal to the previous case. The
change in spin is measured by the polarimeter as Sy.
Page 24

25. Inference:
If the change in the spin in the unaffected part of the body is same as that of the surgery
undergone part, i.e.
If Sx=Sy
Then,
There are no cancer cells in the surgery undergone part of the body and all the cells have
been removed by the surgery.
If the change in spin in the unaffected part is not equal to the change caused by the surgery
undergone part of the body, i.e.
If Sx not equals Sy
Then,
There are some cancer cells in the surgery undergone part of the body and the cancer cells are
not completely removed by the surgery.
The steps involved are:
1) The patient is exposed to a strong magnetic field so that his body cell gets magnetized.
2) A beam of electrons with polarized spin is introduced on the unaffected part of the body
and the change in spin is detected by a polarimeter. Let it be X
3) A beam of electrons with polarized spin is introduced on the part which had
undergone surgery. And the corresponding change in spin be Y
4) If X - Y = 0, it indicates that cancer cells have been removed from the body, if not it
indicates the presence of traces of cancer cells and it has to be treated again for ensuring
complete safety to the patient.
Thus this technique efficiently identifies the presence of cancer cells in that part of the body that
has undergone surgery to prevent any further development.
Page 25

26. CONCLUSION
Spintronics is one of the most exciting and challenging areas in nanotechnology, important to both
fundamental scientific research and industrial applications. These spintronic-devices, combining
the advantages of magnetic materials and semiconductors, are expected to be non-volatile,
versatile, fast and capable of simultaneous data storage and processing, while at the same time
consuming less energy. They are playing an increasingly significant role in highdensity
data storage, microelectronics, sensors, quantum computing and bio-medical applications, etc.
It is expected that the impact of spintronics to the microelectronics industry might be comparable to
the development of the transistor 50 years ago.
Today everyone already has a spintronic device on their desktop, as all modern computers use the
spin valve in order to read and write data on their hard drive. It was followed immediately by the
discovery of Tunneling Magnetoresistance (TMR) leading to the magnetic tunnel junction that has
been utilized for the next generation computer memory known as Magnetic Random Access
Memory (MRAM), another spintronic device for computers. Therefore, the initial driving force for
spintronics has been the improvement of computer technology. At present the research has been
concentrating on the fabrication of spin transistors and spin logics devices integrating magnetic and
semiconductors, with the aim of improving the existing capabilities of electronic transistors and
logics devices so that the future computation and thus the future computer could become faster and
consume less energy.
There are four main areas in spintronics:
. 1) Understanding the fundamental physics, such as spin-dependant transports across the
magnetic/ semiconductor interfaces and spin coherence length in semiconductors.
2) Synthesising suitable spintronic materials with Curie temperatures above room temperature,
large spin polarisation at the Fermi level and matching conductivity between the magnetic and
semiconductor materials.
3) Fabricating devices with nanometre feature sizes and developing new techniques for mass
production.
4) Integrating spin-devices with current microelectronics and computing.
Page 26

27. REFERENCES
1. IEEE Digital Explore Library
2. School of Physics & Astronomy, University of Nottingham
3. Department of Physics and MARTECH , Florida State University
4. Department of Physics and Center for Advanced
Photonic and Electronic Materials
University at Buffalo ,The State University of New York
5. Research Councils UK
www.rcuk.ac.uk
6. Engineering and Physical Sciences Research Council (EPSRC)
www.epsrc.ac.uk
7. Particle Physics and Astronomy Research Council (PPARC)
www.pparc.ac.uk
8. Council for the Central Laboratory of the Research Councils
www.cclrc.ac.uk
Page 27