The new system of Sertecpet Inc. "Claw© RTM" with the alternative of monitoring in real time.

1. SERTECPET®
ENERGETIC INTEGRATED SOLUTIONS

2. REAL TIME MONITORING
SYSTEM
Claw®-RTM

3. The Claw®-RTM system is an equipment of
monitoring tools that permits to obtain
reliable and precise reservoir pressure and
temperature data in real time optimizing
data, time,
the well testing and the production with Jet
g p
Claw® pump.
INNOVACIÓN Y TECNOLOGÍA

4. DESCRIPTION SPECIFICATION
CONDUCTOR 22 AWG
TEC (TUBING
OD 0.25’’
0 25’’ ENCAPSULATED CABLE)
TEMPERATURE RANGE 302ºF (150ºC)
Thickness of the isolation 0.0100’’
External cover Stainless Steel
JET CLAW® SMART PUMP
SMART JET CLAW® PUMP
The Jet Smart Pump is used enough to carry SERTECPET® Shut Down Valve
out the pressure well test and production.
The Smart Jet Pump incorporates Bottom
SERTECPET® DATA LOGGER
valve closing.
SENSOR CLAW®
SENSOR SPECIFICATIONS*
TRANSDUCER TYPE................... QUARTZ
PRESSURE RANGES................... 10,000 psi (69 MPa)
TEMPERATURE RANGES............ 302 °F (150 °C) SERTECPET ® PACKER
PRESSURE ACCURACY................ ± 3.2 psi
PRESSURE RESOLUTION............ ± 0.01 psi
TEMPERATURE ACCURACY........ ± 0.36 °F / ± 0.20 °C
TEMPERATURE RESOLUTION..... ±0.002 °F / ±0.001 °C

5. MAIN ELEMENTS OF CLAW® SYSTEM- RTM
SENSOR OF QUARTZ OF HIGH PRECISION FOR RESERVOIR
TEMPERATURE AND PRESSURE
CARRIER JOINT
TUBING ENCAPSULATED CABLE
JET CLAW® SMART PUMP with SHUT DOWN VALVE
ith
CONNECTION TOOLS
DATA LOGGER

6. SENSOR CLAW®
TECHNICAL SPECIFICATIONS
Transducer type........................................................... Cuarzo
Pressure ranges........................................10.000 psi (
g p (69 Mpa)
p )
Temperature ranges...........................................302ºf (150ºc)
Pressure accuracy...............................................3.2psi
Pressure resolution............................................0.01psi
Temperature accuracy....................................± 0.18ºf/± 0.10ºc
Temperature resolution............................± 0 002ºf/± 0 001ºc
0.002 f/± 0.001 c
Fastest sample rate.....................................1 seg a 18 h.
Tool
diameter/length.....................1.0’’(2.54cm)/28.78’’(73.1cm)
housing material.........................................................718 Inconel

7. SENSOR CLAW®

8. CARRIER JOINT
Manufactured under stringent industry quality
standards and can be adapted to any BHA design.
Joint Carrier permanently as part of BHA.
The
Th sensor i i t ll d outside of th carrier f
is installed t id f the i for
sampling the reservoir and temperature pressure,
the flowing bottom hole pressures and pressure
pump intake through a communication port inside
the pipe.

9. CARRIER JOINT
The internal diameter of carrier fullfils
industry standars and it’s free of
y
obstructions letting by pass of flow,
and other tools, that are necessary for
testing and working with the well.

10. CARRIER JOINT

11. SENSOR ASSEMBLY IN THE CARRIER JOINT
The sensor assembly of the
carrier joint Claw® has
been tested in our hydraulic
pumping well t t b f
i ll test before it
is transported to location.

12. THE SMART JET CLAW® PUMP
Is used in those wells of oil production in a continuous way and in
those well testing operations.
Its h d
I shut down valve optimizes the B ild up test.
l i i h Build
It eliminates the effect of the wellbore storage in the initial periods of
build
b ild up t t
test.
Applicable to exploration and
production wells.
wells
Because of its metallurgy is used for
the recovery of acids and solvents
solvents.
Ideal for cleaning sanded wells.

13. CABLE TEC (TUBING ENCAPSULATED CABLE)
DESCRIPTION SPECIFICATION
CONDUCTOR 22 AWG
OD 0.25’’
TEMPERATURE RANGE 302 F (150 C)
302ºF (150ºC)
Thickness of the isolation 0.0100’’
External cover Stainless Steel

14. TEC CABLE PROTECTOR
TEC OD ¼
TEC OD ¼"
Cable Protector
Cable Protector
for mid Joint and
joint coupling

15. SURFACE CONNECTION TOOLS
DESCRIPTION SPECIFICATION
CONNECTOR SWAGELOCK ¼’’x ¾’’ NPT 3000 PSI

16. SERTECPET® DATA LOGGER
The SERTECPET® DATALOGGER is a high
performance Remote Terminal Unit (RTU)designed
to interface with the Sensor Claw® of pressure and
p
temperature sensing products. It is capable of
acquiring data from virtually any third party device
that supports an analog, digital or Modbus
pp g, g
connection (hard wired or wireless).
• Allows visualizing in the screen parameters,
such as:
o Reservoir Pressure, down hole flowing pressure
o Intake Pressure
o Reservoir Temperature

17. SERTECPET® DATA LOGGER
GIC
(gauge interface controller)

18. GENERAL CONFIGURATION OF THE CLAW®-RTM SYSTEM
Autonomous WELL– JET CLAW” PUMP
system • Bottom sensor
SERTECPET® DATALOGGER
RTU
GIC
• Analogous
entry
SCADA
• Sensor • Analogous
data outset
• Left Modbus
SensorCable
Analogous signal
Digital signal
MODBUS Signal

19. COMMUNICATION SYSTEM
The remote communication
system let us establish real
time communication from any
place to the network in order to
monitoring the pressure and
well operation.

21. RESERVOIR PRESSURE AND TEMPERATURE REAL TIME MONITORING

22. RESERVOIR PRESSURE AND TEMPERATURE REAL TIME MONITORING

23. RESERVOIR PRESSURE AND TEMPERATURE REAL TIME MONITORING

24. RESERVOIR PRESSURE AND TEMPERATURE REAL TIME MONITORING

25. RESERVOIR PRESSURE AND TEMPERATURE REAL TIME MONITORING

26. ADVANTAGES OF REAL TIME MONITORING WELL TESTING WITH JET
CLAW® PUMP
It optimizes time and resources for taking well data.
p g
Real time verification of the build up well test.
It could be registered different testing pressure like Build Up, flowing tests,
injectivity, etc.
injectivity etc
Registers precise data of pressure and bottom temperature for the
reservoir analysis.
Continuous monitoring of Jet Claw® Pump performance.
f l f
Optimizing production with non-stop operation.
Easy install and operation
operation.
Instant registration of data for taking decisions with non – stop production.

27. ADVANTAGES OF REAL TIME MONITORING WELL TESTING WITH JET
CLAW® PUMP
The Jet Claw® Pump is hydraulically set and reversed, without taking out
the completion.
p
Due to its configuration, the Jet Pump does not overheat and its repair can
be done in 15 minutes.
It can produce several pressure differentials according t th
d l diff ti l di to the
characteristics of the reservoir, changing only the injection pressure.
The metallurgy of the pump depends on the requirement of the client, it
can work in corrosive and/or abbrasive environments.
Low operative costs.
Real time immediate recovery of the well capacity, IP
capacity IP.