1. © 2011 Martha Stewart Living Omnimedia, Inc. All rights reserved. For personal use only, not for commercial use.
Clip Art: Make and Give: Raising the Bar: Father’s Day Tie Fudge Packaging
from Martha Stewart Living | www.marthastewart.com
TAB
TAB
Print onto card stock, and cut out. To make
the collar, cut along the solid line in the cen-
ter, and fold down along the dotted lines. Fold
tabs at the edge of each strip, and attach
additional strip to the collar with double-sided
tape. After placing fudge in the container and
closing the lid, use double-sided tape to at-
tach collar to the top of the box. This template
is perfectly sized for a 4-inch-square box, but
to create wrapping for a larger container, sim-
ply print additional strips to attach to collar.

2. © 2011 Martha Stewart Living Omnimedia, Inc. All rights reserved. For personal use only, not for commercial use.
Clip Art: Make and Give: Raising the Bar: Father’s Day Tie Fudge Packaging
from Martha Stewart Living | www.marthastewart.com
TAB
TAB
Print onto card stock, and cut out. To make
the collar, cut along the solid line in the cen-
ter, and fold down along the dotted lines. Fold
tabs at the edge of each strip, and attach
additional strip to the collar with double-sided
tape. After placing fudge in the container and
closing the lid, use double-sided tape to at-
tach collar to the top of the box. This template
is perfectly sized for a 4-inch-square box, but
to create wrapping for a larger container, sim-
ply print additional strips to attach to collar.

3. © 2011 Martha Stewart Living Omnimedia, Inc. All rights reserved. For personal use only, not for commercial use.
Clip Art: Make and Give: Raising the Bar: Father’s Day Tie Fudge Packaging
from Martha Stewart Living | www.marthastewart.com
TAB
TAB
Print onto card stock, and cut out. To make
the collar, cut along the solid line in the cen-
ter, and fold down along the dotted lines. Fold
tabs at the edge of each strip, and attach
additional strip to the collar with double-sided
tape. After placing fudge in the container and
closing the lid, use double-sided tape to at-
tach collar to the top of the box. This template
is perfectly sized for a 4-inch-square box, but
to create wrapping for a larger container, sim-
ply print additional strips to attach to collar.

4. © 2011 Martha Stewart Living Omnimedia, Inc. All rights reserved. For personal use only, not for commercial use.
Clip Art: Make and Give: Raising the Bar: Father’s Day Tie Fudge Packaging
from Martha Stewart Living | www.marthastewart.com
TAB
TAB
Print onto card stock, and cut out. To make
the collar, cut along the solid line in the cen-
ter, and fold down along the dotted lines. Fold
tabs at the edge of each strip, and attach
additional strip to the collar with double-sided
tape. After placing fudge in the container and
closing the lid, use double-sided tape to at-
tach collar to the top of the box. This template
is perfectly sized for a 4-inch-square box, but
to create wrapping for a larger container, sim-
ply print additional strips to attach to collar.