SlideShare ist ein Scribd-Unternehmen logo

Presentation Study on CMM And Application

•Als PPT, PDF herunterladen•
•
S
sandeepbags2004

Featured Study on CMM and its application.study of different sensors and laser sensor technology applications

Bildung
1 von 55
A graduate research project on PERFORMANCE ANALYSIS OF COORDINATE MEASURING MACHINES AND THEIR APPLICATIONS SANDEEP Y. BAGUL December 2009
Table of Contents ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Introduction ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Introduction A Typical CMM
Components of Coordinate Measuring Machine ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Components of Coordinate Measuring Machine Gauging: ,[object Object],[object Object],Gauging of part using a continuous sensor fitted on index able wrist
Components of Coordinate Measuring Machine Digitizing: ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Components of Coordinate Measuring Machine Digitizing: Part scanning on a Traveling Bridge CMM
Components of Coordinate Measuring Machine Scribing: ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Components of Coordinate Measuring Machine Scribing: Scribing a part by means of an Horizontal Arm CMM
Components of Coordinate Measuring Machine Light milling: ,[object Object],[object Object],[object Object],[object Object],[object Object]
Components of Coordinate Measuring Machine Light milling: Light milling of a part by Horizontal Arm CMM
CMM MECHANICAL STRUCTURE ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
CMM MECHANICAL STRUCTURE Cantilever with fixed table ,[object Object],[object Object],[object Object]
CMM MECHANICAL STRUCTURE Cantilever with fixed table Cantilever Architecture Schematic Machine base Sensor Z Y X Guide ways Axis 1 o 2 o 3 o
CMM MECHANICAL STRUCTURE Moving Bridge and Fixed Bridge ,[object Object],[object Object],[object Object],[object Object]
CMM MECHANICAL STRUCTURE Moving Bridge and Fixed Bridge Moving Bridge and Fixed Bridge Architecture Schematics
CMM MECHANICAL STRUCTURE Articulated Arm ,[object Object],[object Object],[object Object],[object Object],[object Object],“ Articulated Arm” Architecture CMM “
3D Laser Scanner ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],3D Laser Scanning integrated with CMM System
Sensors ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Sensors Tactile Sensor Characteristic elements of a generic, tactile, fixed probing system 1. Co-ordinate measuring machine ram (or spindle). 2. Probe extension. 3. Probe changing system. 4. Probe. 5. Stylus changing system 6. Stylus extension 7. Stylus shaft. 8. Stylus. 9. Stylus tip. 10. Tip diameter. 11. Generic, fixed probing system. 12. Stylus system (composed of stylus system components).
Sensors The Rigid Sensor ,[object Object],[object Object],Point measurement by means of a spherical rigid sensors
Sensors Point to Point Tactile Sensors ,[object Object],[object Object],Probing (point measurement) sequences ,[object Object],[object Object],[object Object],[object Object],[object Object]
Sensors Point to Point Tactile Sensors ,[object Object],[object Object],[object Object],Isostatic support tactile sensor
Continued… ,[object Object],[object Object],[object Object]
Sensors Continuous Tactile Sensors ,[object Object],[object Object],[object Object],[object Object],Probing sequence in continuous measurement
Sensors Non Contact Sensors ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Sensors Non contact sensor:3D Triangulation Principle ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],The triangulation principle.
Continued… ,[object Object],[object Object],[object Object],[object Object]
Sensors Non contact sensor: Time of Flight Principle ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],line of reference shown applications
LASER SCANNER TECHNOLOGY CMM APPLICATION ,[object Object],[object Object],[object Object],[object Object]
LASER SCANNER TECHNOLOGY CMM APPLICATION Long range Terrestrial laser Scanner ,[object Object],[object Object],[object Object],[object Object],[object Object],A Diagram for the Terrestrial 3D Laser Scanners
LASER SCANNER TECHNOLOGY CMM APPLICATION ,[object Object],[object Object],[object Object],[object Object],Study area in Spain, dotted line shows Pilot
Continued… ,[object Object],[object Object],[object Object],[object Object]
LASER SCANNER TECHNOLOGY CMM APPLICATION 3D Image Recording of Human Face ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],VI 910 3D Scanners
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
LASER SCANNER TECHNOLOGY CMM APPLICATION 3D Image Recording of Human Face ,[object Object],[object Object],[object Object],[object Object],[object Object],Landmark Location on face of test person
Continued… ,[object Object],[object Object],[object Object],[object Object]
Laser Tracker ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Faro Laser Trackers
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Handy scan Laser Scanner ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Portable 3D Laser Scanner from Z Corporation
Long Range Surveying ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Onsite 3D surveying scanner
3D Laser Scanning Robot ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],3D Laser Scanning Robot Maps Mexican Silver Mine
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object]
Softwares ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
CONCLUSION ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Future Work ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
Continued… ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
References ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
References ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
References ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]
?
[object Object]

Empfohlen

Lecture # 09 Coordinate Measuring Machine (CMM)
Lecture # 09 Coordinate Measuring Machine (CMM)Lecture # 09 Coordinate Measuring Machine (CMM)
Lecture # 09 Coordinate Measuring Machine (CMM)
Solomon Tekeste
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)
RajabhauMatePatil1
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINE
arunkumar6836
 
Coordinate Measuring Machine(CMM)
Coordinate Measuring Machine(CMM)Coordinate Measuring Machine(CMM)
Coordinate Measuring Machine(CMM)
Tushar Makvana
 
UNIT II LINEAR AND ANGULAR MEASUREMENTS
UNIT II LINEAR AND ANGULAR MEASUREMENTSUNIT II LINEAR AND ANGULAR MEASUREMENTS
UNIT II LINEAR AND ANGULAR MEASUREMENTS
Devalakshmanperumal1991
 
Cmm 3
Cmm 3Cmm 3
Cmm 3
S.DHARANI KUMAR
 
Unit III Advances in metrology
Unit III Advances in metrologyUnit III Advances in metrology
Unit III Advances in metrology
arivumani ravanan
 
LINEAR and ANGULAR Measurement
LINEAR and ANGULAR MeasurementLINEAR and ANGULAR Measurement
LINEAR and ANGULAR Measurement
Dhruv Parekh
 

Empfohlen

Lecture # 09 Coordinate Measuring Machine (CMM)
Lecture # 09 Coordinate Measuring Machine (CMM)Lecture # 09 Coordinate Measuring Machine (CMM)
Lecture # 09 Coordinate Measuring Machine (CMM)
Solomon Tekeste
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)
RajabhauMatePatil1
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINE
arunkumar6836
 
Coordinate Measuring Machine(CMM)
Coordinate Measuring Machine(CMM)Coordinate Measuring Machine(CMM)
Coordinate Measuring Machine(CMM)
Tushar Makvana
 
UNIT II LINEAR AND ANGULAR MEASUREMENTS
UNIT II LINEAR AND ANGULAR MEASUREMENTSUNIT II LINEAR AND ANGULAR MEASUREMENTS
UNIT II LINEAR AND ANGULAR MEASUREMENTS
Devalakshmanperumal1991
 
Cmm 3
Cmm 3Cmm 3
Cmm 3
S.DHARANI KUMAR
 
Unit III Advances in metrology
Unit III Advances in metrologyUnit III Advances in metrology
Unit III Advances in metrology
arivumani ravanan
 
LINEAR and ANGULAR Measurement
LINEAR and ANGULAR MeasurementLINEAR and ANGULAR Measurement
LINEAR and ANGULAR Measurement
Dhruv Parekh
 
Ch 26 miscellaneous of metrology
Ch 26 miscellaneous of metrologyCh 26 miscellaneous of metrology
Ch 26 miscellaneous of metrology
Nandan Choudhary
 
CMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINECMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINE
prthgajjar
 
Form measurement
Form measurementForm measurement
Form measurement
Mohd Erfy Ismail
 
Cmm ppt
Cmm pptCmm ppt
Cmm ppt
Akash Maurya
 
Metrology and measurements(Coordinate Measuring Machine)
Metrology and measurements(Coordinate Measuring Machine)Metrology and measurements(Coordinate Measuring Machine)
Metrology and measurements(Coordinate Measuring Machine)
Vignesh Ramanathan
 
Inspection metrology
Inspection metrologyInspection metrology
Inspection metrology
nilesh sadaphal
 
Auto collimator angle dekkor
Auto collimator angle dekkorAuto collimator angle dekkor
Auto collimator angle dekkor
Naman Dave
 
CMM Probe
CMM ProbeCMM Probe
CMM Probe
DHRUV PATEL
 
Calibration of Coordinate Measuring Machines (CMM)
Calibration of Coordinate Measuring Machines (CMM)Calibration of Coordinate Measuring Machines (CMM)
Calibration of Coordinate Measuring Machines (CMM)
Hassan Habib
 
Limits, fits and tolerances
Limits, fits and tolerancesLimits, fits and tolerances
Limits, fits and tolerances
GAURAVBHARDWAJ160
 
Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.
Darshan Panchal
 
LINEAR AND ANGULAR MEASUREMENTS
LINEAR AND ANGULAR MEASUREMENTSLINEAR AND ANGULAR MEASUREMENTS
LINEAR AND ANGULAR MEASUREMENTS
ravikumarmrk
 
ManufacturingTechnology-II , Unit 3
ManufacturingTechnology-II , Unit 3ManufacturingTechnology-II , Unit 3
ManufacturingTechnology-II , Unit 3
Ravi Sankar
 
MT-II UNIT V CNC MACHINING
MT-II UNIT V CNC MACHININGMT-II UNIT V CNC MACHINING
MT-II UNIT V CNC MACHINING
Karthik R
 
Coordinate measuring machine
Coordinate measuring machineCoordinate measuring machine
Coordinate measuring machine
Dharmajeetsinh Jadeja
 
FORM MEASUREMENTS
FORM MEASUREMENTSFORM MEASUREMENTS
FORM MEASUREMENTS
ravikumarmrk
 
Systems of fit
Systems of fitSystems of fit
Systems of fit
DENNY OTTARACKAL
 
Numerical control machines
Numerical control machines Numerical control machines
Numerical control machines
jntuhcej
 
L6 measurement of gear tooth
L6 measurement of gear toothL6 measurement of gear tooth
L6 measurement of gear tooth
taruian
 
Autocollimator
AutocollimatorAutocollimator
Autocollimator
Swarup Singh
 
Using Metrology Software to Capture Data for Reverse Engineering
Using Metrology Software to Capture Data for Reverse EngineeringUsing Metrology Software to Capture Data for Reverse Engineering
Using Metrology Software to Capture Data for Reverse Engineering
Design World
 
Coordinate measuring machine
Coordinate measuring machineCoordinate measuring machine
Coordinate measuring machine
vishal patidar
 

Weitere ähnliche Inhalte

Was ist angesagt?

CMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINECMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINE
prthgajjar
 

Was ist angesagt? (20)

Ch 26 miscellaneous of metrology
Ch 26 miscellaneous of metrologyCh 26 miscellaneous of metrology
Ch 26 miscellaneous of metrology
 
CMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINECMM - COORDINATE MEASURING MACHINE
CMM - COORDINATE MEASURING MACHINE
 
Form measurement
Form measurementForm measurement
Form measurement
 
Cmm ppt
Cmm pptCmm ppt
Cmm ppt
 
Metrology and measurements(Coordinate Measuring Machine)
Metrology and measurements(Coordinate Measuring Machine)Metrology and measurements(Coordinate Measuring Machine)
Metrology and measurements(Coordinate Measuring Machine)
 
Inspection metrology
Inspection metrologyInspection metrology
Inspection metrology
 
Auto collimator angle dekkor
Auto collimator angle dekkorAuto collimator angle dekkor
Auto collimator angle dekkor
 
CMM Probe
CMM ProbeCMM Probe
CMM Probe
 
Calibration of Coordinate Measuring Machines (CMM)
Calibration of Coordinate Measuring Machines (CMM)Calibration of Coordinate Measuring Machines (CMM)
Calibration of Coordinate Measuring Machines (CMM)
 
Limits, fits and tolerances
Limits, fits and tolerancesLimits, fits and tolerances
Limits, fits and tolerances
 
Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.Mechanical Measurement & Metrology - Surface finish.
Mechanical Measurement & Metrology - Surface finish.
 
LINEAR AND ANGULAR MEASUREMENTS
LINEAR AND ANGULAR MEASUREMENTSLINEAR AND ANGULAR MEASUREMENTS
LINEAR AND ANGULAR MEASUREMENTS
 
ManufacturingTechnology-II , Unit 3
ManufacturingTechnology-II , Unit 3ManufacturingTechnology-II , Unit 3
ManufacturingTechnology-II , Unit 3
 
MT-II UNIT V CNC MACHINING
MT-II UNIT V CNC MACHININGMT-II UNIT V CNC MACHINING
MT-II UNIT V CNC MACHINING
 
Coordinate measuring machine
Coordinate measuring machineCoordinate measuring machine
Coordinate measuring machine
 
FORM MEASUREMENTS
FORM MEASUREMENTSFORM MEASUREMENTS
FORM MEASUREMENTS
 
Systems of fit
Systems of fitSystems of fit
Systems of fit
 
Numerical control machines
Numerical control machines Numerical control machines
Numerical control machines
 
L6 measurement of gear tooth
L6 measurement of gear toothL6 measurement of gear tooth
L6 measurement of gear tooth
 
Autocollimator
AutocollimatorAutocollimator
Autocollimator
 

Andere mochten auch

Cmm ( coordinate measuring machine )
Cmm ( coordinate measuring machine )Cmm ( coordinate measuring machine )
Cmm ( coordinate measuring machine )
Agung O
 
Reverse engineering
Reverse engineeringReverse engineering
Reverse engineering
Yuffie Valen
 
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
IndiaMART InterMESH Limited
 

Andere mochten auch (10)

Using Metrology Software to Capture Data for Reverse Engineering
Using Metrology Software to Capture Data for Reverse EngineeringUsing Metrology Software to Capture Data for Reverse Engineering
Using Metrology Software to Capture Data for Reverse Engineering
 
Coordinate measuring machine
Coordinate measuring machineCoordinate measuring machine
Coordinate measuring machine
 
Cmm ( coordinate measuring machine )
Cmm ( coordinate measuring machine )Cmm ( coordinate measuring machine )
Cmm ( coordinate measuring machine )
 
Reverse engineering
Reverse engineeringReverse engineering
Reverse engineering
 
Robot application in material handling
Robot application in material handlingRobot application in material handling
Robot application in material handling
 
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
Automation And Robotic Solutions By Geometrix Automation & Robotic Solutions,...
 
Robots in automobile industry
Robots in automobile industryRobots in automobile industry
Robots in automobile industry
 
BLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATION
BLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATIONBLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATION
BLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATION
 
Basics of Robotics
Basics of RoboticsBasics of Robotics
Basics of Robotics
 
Robotics project ppt
Robotics project pptRobotics project ppt
Robotics project ppt
 

Ähnlich wie Presentation Study on CMM And Application

Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
QUESTJOURNAL
 
nikhil bhagat cmm presentation
nikhil bhagat cmm presentationnikhil bhagat cmm presentation
nikhil bhagat cmm presentation
Akash Maurya
 
co_ordinate_measuring_machine.pdf
co_ordinate_measuring_machine.pdfco_ordinate_measuring_machine.pdf
co_ordinate_measuring_machine.pdf
PradeepKumarb24
 
Renishaw Equator gauge - product overview - December 2016
Renishaw Equator gauge - product overview - December 2016Renishaw Equator gauge - product overview - December 2016
Renishaw Equator gauge - product overview - December 2016
Denis Vasilescu
 

Ähnlich wie Presentation Study on CMM And Application (20)

APPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMMAPPLICATION OF MECHATRONICS IN CMM
APPLICATION OF MECHATRONICS IN CMM
 
Cmm
CmmCmm
Cmm
 
Cmm
CmmCmm
Cmm
 
Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
Applications Use of Coordinate Measuring Machine (CMM) for Measurement Produc...
 
coordinate-measuring-machine final.pptx
coordinate-measuring-machine final.pptxcoordinate-measuring-machine final.pptx
coordinate-measuring-machine final.pptx
 
inspection section.ppt
inspection section.pptinspection section.ppt
inspection section.ppt
 
Probing Systems seminar
Probing Systems seminarProbing Systems seminar
Probing Systems seminar
 
nikhil bhagat cmm presentation
nikhil bhagat cmm presentationnikhil bhagat cmm presentation
nikhil bhagat cmm presentation
 
Co ordinate measuring machine
Co ordinate measuring machineCo ordinate measuring machine
Co ordinate measuring machine
 
Advances in metrology i
Advances in metrology iAdvances in metrology i
Advances in metrology i
 
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptxCOMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
COMPUTER AIDED QUALITY CONTROL AND HANDLING SYSTEMS.pptx
 
Carl-Zeiss Coordinate measuring machine report (O-INSPECT 543)
Carl-Zeiss Coordinate measuring machine report (O-INSPECT 543)Carl-Zeiss Coordinate measuring machine report (O-INSPECT 543)
Carl-Zeiss Coordinate measuring machine report (O-INSPECT 543)
 
measurement
measurementmeasurement
measurement
 
Measurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.comMeasurement techniques in micro machining PDF by badebhau4@gmail.com
Measurement techniques in micro machining PDF by badebhau4@gmail.com
 
ICam Photogrammetry
ICam PhotogrammetryICam Photogrammetry
ICam Photogrammetry
 
MM-UNIT-V.pptx
MM-UNIT-V.pptxMM-UNIT-V.pptx
MM-UNIT-V.pptx
 
co_ordinate_measuring_machine.pdf
co_ordinate_measuring_machine.pdfco_ordinate_measuring_machine.pdf
co_ordinate_measuring_machine.pdf
 
Renishaw Equator gauge - product overview - December 2016
Renishaw Equator gauge - product overview - December 2016Renishaw Equator gauge - product overview - December 2016
Renishaw Equator gauge - product overview - December 2016
 
CNC PROGRAMMING FOR BEGAINER Part 1
CNC PROGRAMMING FOR BEGAINER Part 1CNC PROGRAMMING FOR BEGAINER Part 1
CNC PROGRAMMING FOR BEGAINER Part 1
 
UNIT-V.pptx
UNIT-V.pptxUNIT-V.pptx
UNIT-V.pptx
 

Kürzlich hochgeladen

Seal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptxSeal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptx
negromaestrong
 
1029-Danh muc Sach Giao Khoa khoi 6.pdf
1029-Danh muc Sach Giao Khoa khoi 6.pdf1029-Danh muc Sach Giao Khoa khoi 6.pdf
1029-Danh muc Sach Giao Khoa khoi 6.pdf
QucHHunhnh
 
Spellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please PractiseSpellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please Practise
AnaAcapella
 
Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...
Association for Project Management
 

Kürzlich hochgeladen (20)

How to Create and Manage Wizard in Odoo 17
How to Create and Manage Wizard in Odoo 17How to Create and Manage Wizard in Odoo 17
How to Create and Manage Wizard in Odoo 17
 
This PowerPoint helps students to consider the concept of infinity.
This PowerPoint helps students to consider the concept of infinity.This PowerPoint helps students to consider the concept of infinity.
This PowerPoint helps students to consider the concept of infinity.
 
How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17
 
ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.
 
Seal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptxSeal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptx
 
Magic bus Group work1and 2 (Team 3).pptx
Magic bus Group work1and 2 (Team 3).pptxMagic bus Group work1and 2 (Team 3).pptx
Magic bus Group work1and 2 (Team 3).pptx
 
On National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan FellowsOn National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan Fellows
 
Mehran University Newsletter Vol-X, Issue-I, 2024
Mehran University Newsletter Vol-X, Issue-I, 2024Mehran University Newsletter Vol-X, Issue-I, 2024
Mehran University Newsletter Vol-X, Issue-I, 2024
 
1029-Danh muc Sach Giao Khoa khoi 6.pdf
1029-Danh muc Sach Giao Khoa khoi 6.pdf1029-Danh muc Sach Giao Khoa khoi 6.pdf
1029-Danh muc Sach Giao Khoa khoi 6.pdf
 
Spellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please PractiseSpellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please Practise
 
Understanding Accommodations and Modifications
Understanding Accommodations and ModificationsUnderstanding Accommodations and Modifications
Understanding Accommodations and Modifications
 
Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...
 
Key note speaker Neum_Admir Softic_ENG.pdf
Key note speaker Neum_Admir Softic_ENG.pdfKey note speaker Neum_Admir Softic_ENG.pdf
Key note speaker Neum_Admir Softic_ENG.pdf
 
Sociology 101 Demonstration of Learning Exhibit
Sociology 101 Demonstration of Learning ExhibitSociology 101 Demonstration of Learning Exhibit
Sociology 101 Demonstration of Learning Exhibit
 
Grant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy ConsultingGrant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy Consulting
 
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdfUGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
 
How to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POSHow to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POS
 
Food safety_Challenges food safety laboratories_.pdf
Food safety_Challenges food safety laboratories_.pdfFood safety_Challenges food safety laboratories_.pdf
Food safety_Challenges food safety laboratories_.pdf
 
General Principles of Intellectual Property: Concepts of Intellectual Proper...
General Principles of Intellectual Property: Concepts of Intellectual Proper...General Principles of Intellectual Property: Concepts of Intellectual Proper...
General Principles of Intellectual Property: Concepts of Intellectual Proper...
 
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17 How to Extend Models Using Mixin ClassesMixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
 

Presentation Study on CMM And Application

  • 1. A graduate research project on PERFORMANCE ANALYSIS OF COORDINATE MEASURING MACHINES AND THEIR APPLICATIONS SANDEEP Y. BAGUL December 2009
  • 2.
  • 3.
  • 5.
  • 6.
  • 7.
  • 8. Components of Coordinate Measuring Machine Digitizing: Part scanning on a Traveling Bridge CMM
  • 9.
  • 10. Components of Coordinate Measuring Machine Scribing: Scribing a part by means of an Horizontal Arm CMM
  • 11.
  • 12. Components of Coordinate Measuring Machine Light milling: Light milling of a part by Horizontal Arm CMM
  • 13.
  • 14.
  • 15. CMM MECHANICAL STRUCTURE Cantilever with fixed table Cantilever Architecture Schematic Machine base Sensor Z Y X Guide ways Axis 1 o 2 o 3 o
  • 16.
  • 17. CMM MECHANICAL STRUCTURE Moving Bridge and Fixed Bridge Moving Bridge and Fixed Bridge Architecture Schematics
  • 18.
  • 19.
  • 20.
  • 21. Sensors Tactile Sensor Characteristic elements of a generic, tactile, fixed probing system 1. Co-ordinate measuring machine ram (or spindle). 2. Probe extension. 3. Probe changing system. 4. Probe. 5. Stylus changing system 6. Stylus extension 7. Stylus shaft. 8. Stylus. 9. Stylus tip. 10. Tip diameter. 11. Generic, fixed probing system. 12. Stylus system (composed of stylus system components).
  • 22.
  • 23.
  • 24.
  • 25.
  • 26.
  • 27.
  • 28.
  • 29.
  • 30.
  • 31.
  • 32.
  • 33.
  • 34.
  • 35.
  • 36.
  • 37.
  • 38.
  • 39.
  • 40.
  • 41.
  • 42.
  • 43.
  • 44.
  • 45.
  • 46.
  • 47.
  • 48.
  • 49.
  • 50.
  • 51.
  • 52.
  • 53.
  • 54. ?
  • 55.