Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization
•Als PPTX, PDF herunterladen•
1 gefällt mir•386 views
presentation of paper "Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization"
Empfohlen
Empfohlen
Weitere ähnliche Inhalte
Was ist angesagt?
Was ist angesagt? (20)
Ähnlich wie Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization
Ähnlich wie Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization (20)
Kürzlich hochgeladen
Kürzlich hochgeladen (20)
Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization
- 1. JIST 2014 Optimizing SPARQL Query Processing On Dynamic and Static Data Based on Query Time/Freshness Requirements Using Materialization Soheila Dehghanzadeh, Marcel Karnstedt, Stefan Decker, Josiane Xavier Parreira, Juergen Umbrich and Manfred Hauswirth
- 2. Outline • Introduction • Terminology • Problem definition • Proposed solution • Experimental results • Conclusion Insight Centre for Data Analytics Slide 2
- 3. Introduction: Query Processing On Linked Data • Report changes to the local store (maintenance) • sources pro-actively report changes or their existence (pushing). • query processor discover new sources and changes by crawling (pulling). • Fast maintenance leads high quality but slow response and vice versa. • Problem: On-demand maintenance according to response quality requirements. • Why it is important? It eliminates unnecessary maintenance and leads to faster response and better scalability. Replication (database) or Caching (web) Off-line materialization Local Store Query Processor Query Response NEW sources
- 4. Terminology • Quality requirements: • Freshness B/(A+B) • Completeness B/(B+C) • Maintenance plan • Each set of views chosen for maintenance is called a maintenance plan. • Having n views, number of maintenance plans is 2 𝑛 . • Each maintenance plan leads to a different response quality. 20 October 2014Insight Centre for Data Analytics Slide 4 V1 V2 V3 V4 20% 90% 10% 80%
- 5. Freshness Example a1 b1 T a2 b2 T a3 b3 F a4 b4 T a5 b5 F 20 October 2014Insight Centre for Data Analytics Slide 5 a1 c1 F a1 c2 F a1 c3 T a2 c4 T a6 c5 F a1 b1 c1 F a1 b1 c2 F a1 b1 c3 T a2 b2 c4 T 60% 40% 50% a1 b1 T a2 b2 T a3 b3 T a4 b4 T a5 b5 T a1 c1 F a1 c2 F a1 c3 T a2 c4 T a6 c5 F a1 b1 c1 F a1 b1 c2 F a1 b1 c3 T a2 b2 c4 T 100% 40% 50% a1 b1 T a2 b2 T a3 b3 F a4 b4 T a5 b5 F a1 c1 T a1 c2 T a1 c3 T a2 c4 T a6 c5 T a1 b1 c1 T a1 b1 c2 T a1 b1 c3 T a2 b2 c4 T 60% 100% 100%
- 6. Research questions • What is the least costly maintenance plan that fulfils response quality requirements. • What is the quality of response without maintenance? • what is the quality of response of each “maintenance plan”.
- 7. Experiment • We use BSBM benchmark to create a dataset and a query set. • We label triples with true/false to specify their freshness status. • We summarize the cache to estimate the quality of a query response without actually executing the query on cache. • To summarize the cache we extended the cardinality estimation techniques for freshness estimation problem. Insight Centre for Data Analytics Slide 7 Alice Lives Dublin True Bob Lives Berlin False Alice Job Teacher True Bob Job Developer False
- 8. Cardinality Estimation • Capture the data distribution by splitting data into buckets and only keep the bucket cardinality in the summary. Insight Centre for Data Analytics Slide 8 Alice Job Teacher Alice Lives Dublin Alice Job PhD student Alice Lives Athlon Bob Job Manager Bob Lives Berlin Bob Lives Chicago Bob Lives Munich Bob Lives Belfast Bob Lives Limerick Bob Job CEO Bob Job Consultant Alice Job * 2 Bob Job * 3 Alice Lives * 2 Bob Lives * 5 * Job * 5 * Lives * 7 Freshness True True False False True True True False False False False False 2 3 1 1 1 2 Q1: ?a Job ?b Q2: (?a Job ?b)^(?a Lives ?c) Estimated Actual 5 5 35 19 Estimated Actual 5 5 19 19 Estimated Actual 2/5 2/5 6/35 3/19 Estimated Actual 2/5 2/5 3/19 3/19
- 9. Cardinality Estimation Approaches • System R assumptions for cardinality estimation: • data is uniformly distributed per attribute. • join predicates are independent. • Indexing approaches make both assumptions. • Histogram captures the distribution of attributes for more accurate estimation. • Probabilistic Graphical Models captures dependencies among attributes. Insight Centre for Data Analytics Slide 9
- 10. Measure accuracy of the estimation approach Insight Centre for Data Analytics Slide 10 n is the number of queries Measure the difference between the actual and estimated freshness of queries in a query set.
- 12. Conclusion • We proposed a new approach for on-demand view maintenance based on the response quality requirements. • We defined quality requirements based on freshness and completeness. • We summarized a synthetic dataset to estimate the freshness of various queries using indexing and histogram for our freshness estimation problem. • Using probabilistic graphical model to summarize the dataset is the future work and it is promising to reduce the estimation error. Insight Centre for Data Analytics Slide 12
- 13. Thanks a lot for your attention ! Any question is welcomed! Insight Centre for Data Analytics Slide 13
Hinweis der Redaktion
- Hi All and thanks for coming to my presentation. In this work, I’m going to talk about how to optimize SPARQL query processing on static and dynamic data based on quality requirements of query response which are response time and freshness.
- The outline of the talk is as follows: First we will have a brief introduction on query processing and proposed approaches to make it faster Second, we introduce the terminology of our work. Third, we illustrate the targeted problem with an example. Afterwards we define the problem. The proposed solution and experimental results will then be presented. At the end we will conclude the talk with some directions for future works.
- To process queries on Linked data, the very naïve approach is that the query processor gets the query and fetch the relevant data from original sources, combine them and provide the response to the user. However, fetching data from original sources will take a lot of time and if the original sources become temporarily un-available, query processor can not provide the full response. Enter ------------ To get rid of availability and latency problems, researchers came up with the idea of offline materialization which is called replication in database or caching in Web context. They proposed to materialize as much data as they can in their local store and respond queries only using their local store. This provides very fast response time and will not suffer from the availability issues. Enter----------- However, if the original sources become updated or new sources become available, query processor can’t reflect these changes into its responses and thus provided responses which will suffer from low quality. Enter------------ To address this issue, maintenance mechanisms will help the query processor to compensate the quality issues. Enter------ However, highly frequent maintenance will consume all computational resources and queries will need to wait for computational resources. Thus, a response with high quality will only be achieved with a long response time and vice versa. Enter ------ The problem that we are targeting here is to do on-demand maintenance based on quality requirements of query response . Enter ------ The importance of this problem is that, it eliminates unnecessary maintenance and leads to faster response and better scalability.
- Here we define terminologies <<<point to the first figure>>> To specify the quality requirements of the response, suppose the shaded circle is the response that is provided with local store and transparent circle is the actual response. These 2 responses will share a set of tuples which is represented by “B”. “A” represents out-of-date responses provided with query processor. “C” represents valid responses that has been ignored by query processor due to the maintenance delay. If “A” is empty, that means query processor has partially provided a valid response but the response is not complete. If C is empty that means query processor has provided a complete response but the response is not fully fresh. Therefore, the definition of freshness is B divided by A plus B and the definition of completeness is B divided by B plus C. ---------------------- In each maintenance, query processor will decide to maintain a set of views which we call it a maintenance plan. Given n views, it is obvious that there exist 2 to the power n maintenance plans. As we will show in the next slide, each maintenance plan will lead to a different response quality. I just need to mention that in this work, we haven't touched response completeness and left it for future works. Therefore, we will only deal with response freshness as the response quality requirements.
- In this example we label fresh tuples with T and stale Tuples with F. suppose we have a join between 2 mappings. We want to show that different maintenance plans will lead to different freshness of response. One maintenance plan is not to maintain anything. <<<point to first row>>> One maintenance plan is not to maintain anything. Thus we need to measure the freshness of response with current data in local store. As we can see in first row, mapping 1 with 60% freshness will join with mapping 2 with 40% freshness and the result is 50% fresh. <<<point to second row>>> in the second row, we show the next maintenance plan which is to maintain mapping 1. however, join result is still 50% fresh. <<<point to third row>>>in the third row, we show another maintenance plan which is to maintain mapping 2. however, join result becomes 100% fresh this time. Therefore, various maintenance plans will lead to different quality of response.
- The problem that we are targeting is to find least costly maintenance that fulfils response quality requirements. This boils down to 2 sub-problems. first, estimating the quality of response provided with present cache without maintenance . Second, estimating the quality of response for other maintenance plans. In this work we only targeted the first sub-problem.
- To estimate the quality of response provided with present cache, we use BSBM benchmark generator to generate a dataset and a query set. we labled triples with true/false specifying their freshness status. We summarize the cache to estimate the quality of a query response without actually executing the query on cache. To summarize the cache we extended the cardinality estimation techniques for freshness estimation problem. In the next slide we will present how to extend the cardinality estimation methods for freshness estimation.
- Cardinality estimation approaches are trying to capture the data distribution by splitting data into buckets and keep the bucket cardinality in the summary. In our example, we summrize the whole dataset into an index which stores the cardinality of individual predicates. Now, to test the summary, we run 2 queries; Q1 and Q2. this summary provides accurate estimation for Q1 but to estimate the cardinality of Q2 it multiplies the cardinality of its triple patterns which is 35 while in fact the response cardinality is 19. As we can see this summary has failed to provide good estimation. Enter------ However, a more granular summary, can provide more accurate responses. As we can see, the second index can provide accurate cardinality estimation for Q1 and Q2. Enter------ Now, to extend cardinality estimation methods for freshness estimation we extend the summaries with one more column to store the number of fresh responses in addition to the total number of entries in that category. Enter---------- As we can see the first index provides accurate freshness estimation for Q1 but it failed to provide a good estimation for Q2. Enter----------- However, By storing more granular information in second index, we can provide accurate freshness estimation for both Q1 and Q2.
- To summarize underlying data for cardinality estimation, the original system R has made 2 simplifying assumptions: first they assumed data is uniformly distributed per attribute. Second, they assumed that join predicates are independent. Indexing approaches are making both assumptions to simplify the summarization and estimation process. However, such assumptions barely holds in real datasets. Thus, researchers came up with the idea of histograms to address the uniform data distribution assumption. using probabilistic graphical models we can build summaries that can address the join predicate independence assumptions. In this paper we extended the indexing and histogram cardinality estimation methods for freshness estimation according to the procedure explained in the previous slide.
- In order to measure the accuracy of the estimation approach we used the root mean square deviation error. That is, we sum over all squared differences between the estimated and actual freshness for all queries and we compute the rooted average to get a unique factor specifying the error of that method.
- The result showed that, indexing approach can achieve a very low estimation error and low storage space simultaneously. However, histogram can provide lower estimation error only with a huge summary size. We believe that majority of estimation errors in our queries, is caused by join dependencies which is not addressed by histogram. So we are hoping to further reduce the estimation error by using probabilistic graphical models in our future works.