1. Group F
s1200003 Hiromu Watanabe
s1200017 Akihito Kajikawa
s1200049 Ken Saito
s1200200 Minoru Kobayashi
2. Process 1:Introduction to the product and
its purpose.
The introduction is to assemble to the Tow truck and a car of Lego.
Purpose is issues discovered and roles, performing the schedule management
through group work.
3. (Develop a product specifications list (all LEGO parts used to manufacture) and
identify the components with a label.)
4. Process 4: Confirmation of parts
We were confirmation all the parts.
The bag of parts is dividing into three, the number of No1~3 has been allocated
. Bag No1 ~3 is a normal car parts . No2,3 is a part of the tow truck.
The number of parts is 209 in all. The size of the part is the size about a thumb.
The size is more easy to construct compared to nano block.
Their parts are very characteristic.There are many edicated parts of this
product .
For example , the crane and digestive organ of teh town , the turn signal and
tools such as wrench.
6. Make a tow-truck.
Tow-truck made by bag No.2 and No.3.
In No.2, make Tow-truck’s chassis. No.3 make Tow-truck’s other parts.
7. There are two man, Normal car and tow truck.
Tow-truck can (引っ張る)
8. Slide 8: Identify three important problems you faced during the construction of
the product prototype.
9. Process 9: Planning, Analysis, Design and Execution
Stages
Planning ….It was the division of roles.Engagement to be recorded, it takes to
shoot, it takes to assemble.
Analysis ….Read to munual well.The confirm the nessary parts.
Design ….We think the main points of the manual .It was taken in each of its
main points and recorded.
Execution stages ….Two people assemble. One person shooting the work,
another person recorded the work.
10. Slide 10: Write a CONCLUSION paragraph about how to plan and execute a
construction with LEGO.