16. II. PROBLEMÁTICA.
‐ Pilares esbeltos.
‐ Mineral estratificado.
‐ Roca relativamente
sana.
‐ Pérdida de mineral en
pilares.
‐ Distribución interior.
‐ Caso Chile? Pórfido?
SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
www.excelenciaenmineria.uc.cl
Centro de Minería
Pontificia Universidad
Católica de Chile.
Laboratorio de Gestión
de Activos Físicos
18. • Proceso de Hundimiento (Caving) en minería
subterránea.
Pre Undercut Panel Cavingg
Perforación y voladura de “tiros” en abanico:
‐ Rotura de la roca sobre el nivel de hundimiento
‐ Conexión de “bateas” entre el nivel de
hundimiento y el de explotación.
Túneles: nivel de producción
Bateas
Zona de concentración de
tensiones
II. PROBLEMÁTICA.
SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
www.excelenciaenmineria.uc.cl
Centro de Minería
Pontificia Universidad
Católica de Chile.
Laboratorio de Gestión
de Activos Físicos
19. ‐ Tipo pilar de estudio.
‐ Pilares rectangulares
extensos.
‐ Galerías.
‐ Efecto de tensiones
(no gravitacionales).
‐ Métodos de cálculo.
(área tributaria)
II. PROBLEMÁTICA.
SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
www.excelenciaenmineria.uc.cl
Centro de Minería
Pontificia Universidad
Católica de Chile.
Laboratorio de Gestión
de Activos Físicos
63. • Tamaño v/s complejidad.
• Evidencia pruebas.
• Factor batea.
• ¿Vale la pena un modelo más complejo?
V. DISCUSIÓN.
SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
www.excelenciaenmineria.uc.cl
Centro de Minería
Pontificia Universidad
Católica de Chile.
Laboratorio de Gestión
de Activos Físicos
64. • Tiempo desarrollo proyectos (frase inicial).
• Intentar no es perder el tiempo.
• No se puede es una oportunidad, no un cierre.
• Soluciones
V. DISCUSIÓN.
SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
www.excelenciaenmineria.uc.cl
Centro de Minería
Pontificia Universidad
Católica de Chile.
Laboratorio de Gestión
de Activos Físicos
67. SEM I, Mining Excellence Seminar.
San Joaquín, 25 de noviembre de 2010.
Centro de Minería
Pontificia Universidad
Católica de Chile.www.sem‐uc.cl
VI. REFERENCIAS.
[1] Van Sint Jan Michel, (2010), Modelo simple de un pilar en túneles, nivel de producción. Draft, abril.
[2] Zipf Karl. Pillar design to prevent collapse of Room and Pillar mines. SME 2001.
[3] Iannacchione, A. Analysis of pillar design practices and techniques for U.S. limestone mines.
[4] Kendorski Francis. Towards an improved stone mine pillar design methodology: observations from a mistake. 26Th Conference
on ground control in mining.
[5] Wagner H. (1980), Pillar design in coal mines. Journal of the South African Institute of mining and metalurgy.
[6] Pastarus Juri‐Rivaldo., Nikitin Oleg., (2005) Methods of mining block stability analysis for room and pillar mining with
continuous miner in estonian oil shale mines. Estonian Science Foundation supported research.
[7] Islam R., Hayashi D., Kamruzzaman A., (2009), Finite element modeling of stress distributions and problems for multi‐slice
longwall mining in Bangladesh, with special reference to the Barapukuria coal mine, International Journal of Coal Geology (78), pp
91‐109.
[8] Pastarus J.‐R., Toomik A., (2001), Roof and pillar stability prognosis in Estonian oil shale mines. Estonian Science Foundation
supported research, NO.3651.
[9] Rinne M., Shen B., Lee H.‐S., (2004), Aspo Pillar Stability Experiment. Modelling of fracture development of ASPE by FRANCOD,
Fracom Ltd.
[10] Mark C., Heasley K., Iannacchione A., Tuchman R., (1999), Proceedings of the Second International Workshop on Coal Pillar
Mechanics and Design, US Department of Health and Human Services, ISSN 1066‐5552.
[11] Gang Qi, (1996), Wavelet‐Based Acoustic Emission analysis of composite materials, PhD Tesis. Texas Tech University.
[12] Vervoort A., Ganne P., Van de Steen B., Effect of stress state on fracture initiation and growth around circular openings. The
6Th International Symposium on Ground Support in Mining and Civil Engineering Construction, pp 381‐390.
[13] Huang M., Jiang L., Liaw P., Brooks C., Seeley R., Klarstrom D., (1998) Using Acoustic Emission in Fatigue and Fracture
Materials Research., JOM, (50), nº 11.
[14] Grosse C., Reinhardt H., Dahm T., Localization and Classification of Fracture Types in Concrete with Quantitative Acoustic
Emission Measurement Techniques.