1. Process Journal (Drilling/
Sketching 3 wheels)
Nov. 4th 2010
1. What did I do?
Today I needed to make wheels for my project. Usually,
when I am making wheels, I used coping saw or tenon saw
a lot. However, in this case, I used drill to cut the
wheels and that was it for cutting the drill. Plus, Mr.
Anderson came later, because of the Process Journal. He
needed to check all of the students. Anyways, it took a
lot of time to wait Mr. Anderson. During waiting, I
used half- round file to round the edge of my “Penguin”.
Also I used disc- sander to sand the “Ices”. I didn’t
know that I needed to have permission to sand it.
2. The Emotion
The emotion for today was nervous and worried. Because,
I needed to drill to get my wheels and the drilling was
pretty hard. I always think that I will ruin the
project soon. However, today I did really good job. I
finished drilling the 2 wheels. I said that I used
disc- sander during waiting Mr. Anderson. The “Ices”
are pretty hard to sand. Because the “Ices” were small
pieces. It was hard to control as sanding the pieces.
3. Changes to your plan
It’s still same as what I wrote in the final evolution
and the flow sheet. Not difference between them.
4. What’s next?
Basically, next step is to drill the rest of wheels.
Which are two wheels leftover. Plus, I need to do glue
the ices on the Ice flow. Wait; before I glue them, I
need to drill the ice flow that it can have the wheels.
5. Why?
I am in creating stage; I am half finished by drilling
the wheels. I need to work more on the drilling that
ice flow can have wheels.
6. A.O.I & Learner Profile
Today’s A.O.I is environment. Because, I used wood to
make this project and I feel like I am using a lot of
environment. We need to save the forests. Anyways, the
2. learner profile for today is caring. When I was doing
drilling, Mr. Anderson helped me to hold the metal vice.
Which means that he cares about me not to get hurt.
Well, actually he helped everyone and he DOES care
about every single person.
7. Pictures & Diagrams
8.
This is the picture of
drilling and how to drill.
Finally, I finished drilling
the first wheel!
I was drilling second
piece of wheels.
This is the picture that I
finished drilling the first
wheels. ->
