The document describes a smart trash bin project created by a group of 3 students. The smart trash bin uses an ultrasonic sensor to detect when someone passes within 10cm of the bin, which triggers a servo motor to open the bin lid. LED lights and an LCD display indicate the bin status and prompt users to dispose of trash. The project aims to promote proper trash disposal and a clean environment.

1. Home Automation Project
SMART TRASHBIN
Created By : Group 9
Members : 1. Handy Mulyaguna (151611044)
2. Risana Dewi Saputri (151611059)
3. Siti Amimah (151611062)

2. Home Automation Project
SMART TRASHBIN

4. Smart Trashbin
1
Background
Description,Tools&Material
ProcedureProgram & Series
Trial & Analysis
Conclusion & Suggestion

5. Science and technology are the things most needed by the people in
this era of globalization in order to meet the necessities of life.
Science and technology continue to evolve over time, so that the
community needs can be easily met.
There are still a lot of trash scattered about the environment around
us, but we know that with littering would lead to disaster and
disease, By Utilizing Technology and Apply it on the Project Smart
trashbin aims to draw attention to the environment to dispose of
waste in place, to make automatic trashbin,we hope others can
develop a project that we've created, so can d use for a larger
scope.
Background
2

6. Description
3
This Project worked if someone pass in front of the trash bin,ultrasonic sensor
will detect the distance,we set the distance in less 10cm so if someone pass
less 10 cm from the trashbin,ultrasonic sensor will work and moved the servo
motor, so that the trash bin will be open,and the Green LED will On,and if the
distance more that 10cm the trashbin will keep closed and the Red LED will
On.
And if the volume of trash in the low position the Green LED will On and will
show an output in LCD Display “BERSIH ITU SEHAT,TERIMAKASIH”,and the
last the Red Led Will On if the volume of trash in high volume and the Buzzer
will On,and the output in the lcd display is “ PERHATIAN !!! Sampah Penuh”.
Smart Trash Bin

7. Buzzer LCD Display Ultrasonic Sensor LED
Tools & Material
Arduino Uno
4

8. Male To Male Jumper
Male To Female
Jumper
Resistor Servo Motor
Tools & Material
Female to Female
Jumper
5

9. PCB Trashbin
Tools & Material
6

10. 7
Arduino Uno
Arduino/Genuino Uno is a microcontroller board based on the ATmega328P . It has 14 digital
input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz
crystal, a USB connection, a power jack, an ICSP header and a reset button.

11. 8
Buzzer
A buzzer or beeper is an audio signalling device, which may be mechanical, electromechanical,
or piezoelectric. Typical uses of buzzers and beepers include alarm devices, timers, and
confirmation of user input such as a mouse click or keystroke

12. 9
LCD Display
LCD (liquid crystal display) is the technology used for displays in notebook and other smaller
computers.

13. 10
Ultrasonic Sensor
An Ultrasonic sensor is a device that can measure the distance to an object by using sound waves.
It measures distance by sending out a sound wave at a specific frequency and listening for that
sound wave to bounce back. By recording the elapsed time between the sound wave being
generated and the sound wave bouncing back, it is possible to calculate the distance between the
sonar sensor and the object.

14. 11
Servo Motor
A servomotor is a rotary actuator or linear actuator that allows for precise control of angular or
linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for
position feedback

16. The Procedure
13
Prepared All the tools and material that we’ll
needed to make this project.
First Step
find out the module&code of every component.
After we find out all the module,we try the code of
every component to test all the component to make
sure that no error,to test the script program we should
use arduino apication
2th Step
Combain all the script porgram of every component
become one scipt programs,and upload the
script,before upload the script,connect Arduino to
computer used USB cable.
3rd layer
Connect every cable on all the component,and conncet
them to the pin on arduino,and assamble all of the
component on the prothoboard or PCB for the fix script
program.
4th Step
Made the desain to trashbin,and placed all the
component to the trashbin.
5th layer
After we finnish do the step,try the project,pass
in the front of trashbin with distance less than
10 cm,and we can see an output.
Last Step

17. Script Program
14

18. Script Program
15

19. Script Program
16

20. Script Program
17

21. Series
21

22. How System Work
22
MIKROKONTR
OLLER
ARDUINO UNO
R3 ATmega 328
P
Servo
Motor
Cover
Trashb
in
Ultrasonic
HC-SR04
Buzzer
LCD
Display
LED
Display
AKTUATOR
DISPLAY
TRANSDUCER

23. Trial Table
23
Exp : V,for Servo Motor rottated,and moved the cover of trashbin
V,for LED turn Light
- , for servo motor not rottated,and the trashbin keep closed.
-, for LED turn Off.
No
Distance Servo LED
(cm)
0 180° RED GREEN
1 1 - V - V
2 3 - V - V
3 6 - V - V
4 9 - V - V
5 12 V - V -
6 15 V - V -
7 18 V - V -
8 20 V - V -

24. Analysis
24
At the time of the trash in a state of stand-by (the cover of trash can closed), which lights up green (no 1,
indicator for the trash not full yet) and red light (no1, indicator for cover of the trashbin can closed) when our hand
getting close ultrasonic sensor ( ultrasonic sensor 1), then the cover of trashbin opened and the lights turn green (1 &
2, No. 2 indicator for trash can opened) If the trash is empty, then the green light (no one on and the lCD will display the
words "Bersih itu sehat. Terimakasih".
If the trash is full, the led will turn red light (no 2 will light up) and the LCD will display the phrase
"Perhatian,Sampah Penuh".

25. Conclusion
25
Arduino Uno can be a controller in this experiment, depending on the script programthat has been created.
Datasheet of component is really needed in the trials

26. Suggestion
26
If we want detect the volume of the trash with 3 variable,low,middle,and high,it’s use 2
ultrasonic sensor and set with different distance.
We can used 2 buzzer,for volume of trash and for the cover of the trasbin when the
cover of trashbin opened the buzzer will turn on.

27. Reference
27
https://www.youtube.com/watch?v=3mWDQg3NyoY
https://www.youtube.com/watch?v=S-zSRk9Ibrw
https://www.youtube.com/watch?v=YLIkgHJxIvI
https://www.youtube.com/watch?v=91_3U8ZacBY

28. Reference
28
https://www.youtube.com/watch?v=6mKbmshUB8w
https://publication.gunadarma.ac.id/handle/123456789/4600
https://www.youtube.com/watch?v=3RV3AI-3zeA
https://www.youtube.com/watch?v=oqV2xU1fee8

29. 29
Check and like our video on YouTube :
https://youtu.be/ww8x4HT5bEk
Our Link Project

30. Thank You!