2. About Aster Building Solutions
Aster building solutions Private Limited (ABSPL) is subsidiary of Aster Teleservices Private Limited
which is well known brand for its quality products and services offered in the field of Telecom, Power
and Broadcasting sector since 1998 and has set very high standards in this field. ABSPL specializes in
Pre-Engineered Metal Building Systems from Design to Erection through Planning, Engineering,
Fabrication and Supply. Design and Detailing work is carried out by a highly skilled Engineering team
having rich experience and expertise exclusively in metal buildings using fully optimized techniques,
keeping up the quality and having excellent Computer Aided Design and Drafting facilities using the
Indian & International design Standards & Specifications of PEB.
ABSPL started its journey in India having state of the art manufacturing facility plant of about 25,000
sq. m spread in 138,360 sq. m of land near Hyderabad in Andhra Pradesh with initial annual capacity
of 50,000 MT. The Company plans to enhance the production capacity to 100 MMTPA with
manufacturing facilities at Vadodara and Raipur along with Hyderabad. ABSPL with full fledged
infrastructure facilities strives for excellence in providing cost effective and efficient Design &
Engineering with 100% accuracy and zero error towards utmost satisfaction of customer.
Vision
“Achieve Performance Excellence And Create Standards”
We will strive to perform for our customers (both internal and external) in a manner that exceeds
customer expectations. We will deliver products, solutions and services that are optimum to meet
customer requirements. We will achieve performance excellence in all endeavours.
Mission
• To provide services to our Customers in time and adapt to their changing needs.
• Be a quality conscious value supplier of products, solutions and services.
• Empower the employees.
• Be an equal opportunity employer and provide all employees with a platform for
Growth and Leadership.
• Maintain high standards of Corporate Governance.
• Constantly strive to enhance shareholder value.
Values
• Commitment to Customers, Employees and Shareholders
• Ethical Behavior
• Respect for every individual
• Aversion for waste
• Lead by example
3. Quality Management System
Aster implements a rigid quality management system architecture based on Asters mission and
corporate values. This architecture encompasses a wide range of mature and robust systems and
processes, and enables Aster to provide responsive support to customers.
What we offer from Aster…..
Reliability
We offer reliable customer service as well as technical support from our own engineering team. We
make customized design as per specific needs of different customers indicating the different items of the
building, so that the customer can satisfy themselves before further proceeding with purchase order.
Our end product is warranteed as per specification commitments.
Quality
All our components are manufactured to the tolerances according to the Metal Building Manufacturers
Association. From the welds on our I-Beams to our long lasting paint finishes, we only allow the best
parts to leave the factory doors because we know that our products represent our company.
Expertise
At ASTER, we Plan, Design, Engineer, and Detail the Pre-Engineered Buildings. Our Design range
covers all types of buildings from airplane hangars to multi story structures, Factory to Residential
Buildings, Warehouses to Shopping Malls.
Our philosophy
At ASTER we know that satisfied customers are the corner-stone of our success. Our goal is your
satisfaction.
4. 9
Details of PEB 11
10
12
1. Rigid Frame
2. Vertical Fascia 13
3. Roll up Door 8
4. Bracing
5. Concrete Floor
6. Down Spout 14
7. Industrial Fin Type louver
8. Eave Gutter
9. Turbo Vent 7
10. Roof Jack
11. Roof Monitor 6
5
15
4
3
16
12. Roof Curb
17
13. Ridge Vent
14. Sky Light Panels
18 2
15. Roof & Wall Panels
16. Rake Trim
17. Canopy
19 1
18. Sliding Door
20 19. Z-Purlin/Girt
20. Post and Beam at Endwall
21
21. Aluminum Glass Window
5. Pre Engineered Steel Buildings
A Pre-Engineered Building system is a building structure that consists of pre-engineered, pre-fabricated building
components that are combined together and assembled structurally, so that all components work together as one “system”.
Pre-Engineered Buildings can be as unique as customer's needs. A Computer-Assisted Design helps create a building for a
specific use, whether it's a Commercial or Residential use. They feature a structural steel framework of primary and
secondary members (rigid frame, purlins and girts) on to which cladding and roofing components are attached.
Suitable thermal insulation can be provided where an environmental conditioning is required.
The complete building is engineered to facilitate easy production and faster assembly on site.
Advantages of ASTER PEB:
• Economical • Seismic Resistance
• Aesthetic Appeal • Assured Quality
• Pleasing Colors • Modular Expansion
• Faster Completion • Environmental Resistance
• Free from Construction Deficiencies • Maintenance Free
• Strength & Durability • Easy Relocation
Applications
Industrial Buildings & Warehouses Office Buildings Commercial & Recreation Centres
Showrooms Architectural Buildings Railway Stations
6. Aster Building Framing Systems: Professionally Engineered
Created by Aster's professional engineers to meet your exact needs, our custom-designed framing systems
provide exceptional flexibility and optimum performance. Available in a wide variety of shapes, sizes and
layouts to suit virtually any building requirement, our framing systems are engineered to fit accurately for
efficient, economical construction.
Primary Members
Moment resisting frames provides lateral stability and transfers the roof and wall loads to the foundations
through anchor bolts. All Built-up Numbers Conforming to A 570/572 of Grade z.
Sample Cases - CLEAR SPAN OPTIONS (CS):
Span : 6 to 90* m
Height : 3 to 15 m
Slope : 1 ' to 33 ' min
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 90 m
Sample Cases - MULTI SPAN FRAMES (MS):
Span : 24 to 180* m
Height : 3 to 15 m
Slope : 1 ' to 33 ' min
WIDTH MODULE WIDTH MODULE
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 180 m
Sample Cases - CURVED RAFTERS FRAMES (CR):
Span : 6 to 50* m
Height : 3 to 12 m
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 50 m
Sample Cases - MULTI GABLE FRAMES (MG):
Span : 18 to 200 m
Height : 3 to 12 m
Slope : 1 ' to 33 ' min
WIDTH MODULE WIDTH MODULE
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 200 m
Sample Cases - HIGH BAY-LOW BAY(CS):
Span : 18 to 90* m
Height : 3 to 12 m
Slope : 1 ' to 33 ' min
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 90 m
Sample Cases - SINGLE SLOPE (SS):
Span : 6 to 50* m
Height : 3 to 12 m
Slope : 1 ' to 33 ' min
Bay : up to 9 m BUILDING WIDTH
MAX. PRACTICAL WIDTH = 50 m
LEAN TO: T-CANOPY :
Span : 3 to 15* m Span : 4-6* m
Height : 3 to 12 m Height : 3 m
Slope : 1 ' to 33 ' min Slope : 1 ' to 33 ' min LEAN TO
MAX. PRACTICAL WIDTH = 15 m
T - CANOPY
MAX. PRACTICAL WIDTH = 4-6 m
*Span may change based on customer’s requirement
7. Secondary Members
‘ Z ’ AND ‘ C ’ - COLD FORMED SECTIONS
Purlin, Girt and Eavestruts shall be cold formed from steel which has minimum
yields strength of 345 MPa (50,000 psi) and will confirm to the physical
specifications of ASTM A-570 (Grade 50) or equivalent.
1. Purlins and Girts shall be roll formed Z sections, 120-300 mm Z - Section
deep with 50-100 mm flanges. Each flange shall have a 16 mm
stiffening lip formed at 45° to the flange with a thickness
of 1.5 to 2.5 mm.
2. C-channels are 100-300 mm deep roll formed with 50-100 mm
flanges
All other miscellaneous secondary members shall have a minimum yield
C - Section
2
strength of 240 MPa/m
Roof and Wall Panels
Roof /Wall panels are manufactured out of high strength steel
grade with minimum tensile strength of 550 MPa
The steel base is coated with Zinc-aluminum alloy with minimum
2
Az150 (150 g/m coating mass) as per ASTM A792. 1000 mm
250 mm
Color coated Galvalume confirming to ASTM specification has 30 mm
20 mm
60 mm 46 mm
specifically formulated paint system for external roofing and wall
cladding application to give aesthetical appearance for long
lasting color for much longer time than any other conventional
Color Chart
paint system.
The paint system is designed to resist chalking and fading. The
painting will be baked enamel polyester or silicon polyester with a
film thickness of 1.0 mil, the reverse side shall be white with 0.5 Surfmist Burnt Almond Headland
mil film thickness
The Aster panels shall have 30 mm deep major ribs, which taper in
width from 20 mm to 60 mm, and are spaced 250 mm on center.
Between two major ribs is additional minor stiffening ribs spaced Pale Eucalypt Cottage Green Beige
at 46 mm on center, Each panel shall provide one meter coverage.
Sky Blue Torres Blue
Color shades are for color matching only.
8. Building Accessories
Hardware Sealants & Foam Closures Ridge Vents Roof Curb
Roof Jack Sliding Door Sky Lights
Walk Door Window Adjustable Louver Fixed Louver
Building Additions:
• Fascia : A fascia is typically used for aesthetic purposes. The fascia will
hide the slope of the roof and conceal any other roof accessories. It also
creates an exceptional area for signage, making the building a much more
attractive commercial structure.
• Custom & Standard Canopies : Canopies provide a covering for
windows, walkways, doors, and MORE! They are appealing to the eye and
make your metal building unique. Contrasting colors can be used as well
to provide an impressive appearance. These canopies can be designed in
many shapes, sizes and colors to satisfy any customer's demands.
• Insulation: The temperature inside the metal buildings change with the
change in climatic conditions. They are also susceptible to condensation.
Insulation will reverse these effects by acting as a barrier and hence
maintaining the temperature at the desired level, thus preventing
condensation.
9. The Manufacturing ability to exceed expectations.
At ASTER, every single structural steel component of our building system is manufactured in-house
using technology that is second-to-none in the industry. This fully integrated manufacturing process
allows management to monitor every step of production while our commitment to state-of-the-art
equipment reduces costs and improves quality. Adequate manufacturing facility exists to meet the
requirement of the customer now and in future.
By combining the best technology and the best manufacturing practices under one roof, ASTER creates
structures that exceed both building requirements and our clients' expectations.
Built up lines, PHI Samco Workhouse-roll forming
Samco Purlin Roll former Shearing Machine
CNC Proarc Slitting & Cut to length Machine
10. Projects Handled & Capabilities
Curved Rafter Building
Multi Span Building
Clear Span with L-To Building
High Bay - Low Bay Building
11. WHEN IT'S TIME TO BUILD, BUILD WITH THE RELIABILTY OF ASTER
ASTER uses superior designs, state-of-the-art manufacturing capabilities and unparalleled expertise
to build the highest quality steel buildings worldwide.
Clear Span with Curved Eaves Building
Clear Span Building
Clear Span with T Shape Building
