Amil Baba in karachi Kala jadu Expert Amil baba Black magic Specialist in Isl...
Prof hamada
1. ประวัติและผลงาน
ของ
Prof. Hiroyuki HAMADA
เพื่อประกอบการพิจารณามอบปริญญากิตติมศักดิ์
วิศวกรรมศาสตรบัณฑิต ภาควิชาวิศวกรรมวัสดุและโลหการ
1) ประวัติสวนตัว
ชื่อ - สกุล Hiroyuki HAMADA
วัน เดือน ปเกิด พฤศจิกายน 2498 (November, 1955)
อายุ 55 ป
ที่อยูปจจุบัน
Matsugasaki, sakyo-ku, kyoto, 606-8585, JAPAN
โทรศัพท +81-75-724-7844
2) ประวัตการศึกษา
ิ
• ปริญญาตรีวิศวกรรมศาสตรบัณฑิต (B.Eng), Doshisha University, 1978
• วิศวกรรมศาสตรมหาบัณฑิต (M.Eng), Doshisha University, 1980
• ดุษฏีวิศวกรรมศาสตรบัณฑิต (Dr.Eng), Doshisha University, 1985
3) ประวัตการทํางาน
ิ
• นักวิจัย (Research Associate), Osaka Municipal Technical Research Institute, April, 1986
• ตําแหนงรองศาสตราจารย (Associate Professor), Kyoto Institute of Technology, October, 1987
• ตําแหนงศาสตราจารย (Professor), Kyoto Institute of Technology, March, 1998
• Director of Venture Laboratory of the Graduate School and dean of the Division of Advanced Fibro
Science, 2011
• Director of Future-Applied Conventional Technology Centre in Kyoto Institute of Technology (F-ATC),
2011
2. 4) ผลงานทางวิชาการ
หนังสือ
Title Author Publisher Month/Year
Design and H. Hamada and S. V. Hoa Technomic Publishing 1997.01
Manufacturing of Company
Composites
Design and H. Hamada and S. V. Hoa Technomic Publishing 1998.08
Manufacturing of Company
Composites
3-D texitile H. Hamada, S. Woodhead Publishing 1999.12
reinforcements in Ramakrishna, Z. M. Huang Limited
composite materials
Design and H.Hamada, S. V. Hoa, J. Technomic Publishing 2000.03
Manufacturing of Lo, A. Yokoyama Company
Composites
Natural Fibers, Amar K. Mohanty, Taylor & Francis 2005.01
Biopolymers, and Manjusri Misra, Lawrence Group
Biocomposites T. Drzal, Hiroyuki
Hamada, 66
บทความวิจัย และผลงานเผยแพร
Subject, etc. Author Publisher Year / Month
Effect of Silane Treatment on Fracture N. Ikuta, H. Hamada, E. 2003.04
Process of Glass Fiber in Single Nishio, I. Abe, and Z.
Filament Coupon Test, Transactions of Maekawa,
the Society of Fiber Science and
Technology, Japan, 47, 4,178-183
The Mechanical Properties of M. Sakaguchi, A. Nakai, H. Elsevier 2000.04
Unidirectional Thermoplastic Hamada and N. Takeda Science Ltd
Composites Manufactured by a Micro-
Braiding Technique, Composites
Science and Technology, 60, 5, 717-722
Energy Absorption Properties of H. Hamada, K. Kameo, M. 2000.05
Braided Composite Rods, Composite Sakaguchi, H. Saito and M.
Science and Technology, 60, 5, 723-729 Iwamoto
Degradation of Braided Composites in Asami Nakai, Shinya Elsevier 2000.02
Hot Water, Composites Science and Ikegaki, Hiroyuki Hamada, Science Ltd
Technology, 60,3,325-331 Nobuo Takeda
Mechanical Properties of Knitted Fabric H. Hamada, K. Sugimoto, 2000.05
Composites, Reinforced Plastics and A. Nakai, N. Takeda, S.
3. Composites, 19, 5, 364-376 Gotoh, T. Ishida
Mechanisms of Modeiinterlaminar M. Kotaki, T. Kuriyama, H. 2000.03
Fracture of Glass Woven Fabric Hamada, Z. Maekawa and
Composites, Advanced Composite Narisawa
Letters, 9, 3, 217-221
Subject, etc. Author Publisher Year / Month
The Influence of Sizing Conditions on H. Hamada, K. Fujihara, A. Elsevier 2000.09
Bending Properties of Continuous Glass Harada Science Ltd
Fiber Reinforced Polypropylene
Composites, Composites partA, 31, 9,
979-990
Mechanical Properties of Flat Braided Takeru Ohki, Shinya 2000.08
Composites with a Circular Hole, Ikegaki, Ken Kurasiki,
Journal of Engineering Materials and Hiroyuki Hamada and
Technology, 122, 4, 420-424 Masaru Iwamoto
Effect of Surface Treatment on Mode I J.K.Kim, M.L.Sham, Elsevier 2000.06
Interlaminar Fracture Behaviour of H.Hamada, Y.Hirai, Science Ltd
Plain Glass Woven Fabric K.Fujihara, H.Saidpour,
Composites:Part I. Report of the 2nd M.Sezen, Y.J.Dong,
Round-Robin Test Results, Composite H.S.Yang, Y.L.Bai,
Interfaces, 7, 3, 227-242 T.X.Mao, C.Bathias,
S.V.Hoa, A.Boutella,
A.D.Ngo, P.Krawczak,
R.Bequignat, J.Pabiot,
S.Pinter, G.Banhegyi,
L.T.Drzal, H.Ho, C.Y.Yue,
K.Padmanabhan, Y.Suzuki,
T.Tanimoto, K.Schulte,
J.K.Karger-Kocsis,
W.J.Cantwell, R.Zulkitli,
L.Ye, J.J.Lesko and
K.Garcia
Role of surface treatment in textile A. Nakai, T. Osada, H. Elsevier 2001.04
composites, Composites partA, 32, , Hamada, N. Takeda Science Ltd
487-498
Mechanical Properties of Flat Braided Asami Nakai, Akio Ohtani, Elsevier 2001.05
Composite with Flexible Interphase, Takeru Ohki, Toshiko Science Ltd
Composite Interfaces, 7,( 5,6), 399-410 Osada, Masaharu Iwamoto,
Hiroyuki Hamada and
Nobuo Takeda
Mechanical Properties and Micro- Asami Nakai, Takeru Ohki, Elsevier 2001.05
Fracture Behaviors of Flat Braided Nobuo Takeda, Hiroyuki Science Ltd
Composites with a Circular Hole, Hamada
Composite Structures, 52, , 315-322
Micro/Macro Damage Evaluation of Takeru Ohki, Asami Nakai, 2000.02
Flat Braided Composites with a Hiroyuki Hamada and
Circular Hole, Science and Engineering Nobuo Takeda
4. of Composite Materials, 9, 2, 55-66
Interfacial Properties of PP/PP Takeo Kitayama, Kentaro 2000.02
Composites, Science and Engineering Ishikura, Tatsuro Fukui and
of Composite Materials, 9, 2, 67-73 Hiroyuki Hamada
Subject, etc. Author Publisher Year / Month
Annealing Effect in Glass Woven M. Kotaki, T. Kuriyama, H. Elsevier 2001.05
Fabric Composites, Part I. Mode I and Hamada, Z. Maekawa and Science Ltd
II Interlaminar Fracture Behavior, I. Narisawa
Composite Interfaces, 7,(5,6), 363-383
Influence of Aging and Surface C. Suri, H. Hamada and K. Elsevier 2001.02
Treatment on the Mode II Fracture Hujihara Science Ltd
Behaviour in a Glass/Vinylester
Composite, Composite Interfaces, 8, 2,
135-149
Flexural Properties of a Hybrid Polymer I. J. DAVIS and H. Hamada 2001.01
Matrix Composite Containing Carbon
and Silicon Carbide Fibres, Adv.
Composite Mater, 10, 1, 77-96
Crushing Properties of Pultruded Glass H. Saito, R. Inai, H. 2002.01
Reinforced Square Tubes, IJCrash, 7, 1, Hamada
21-33
Energy Absorption of Braiding Hiroshi Saito, Elsevier 2002.03
Pultrusion Process Composite Rods, E.C.Chirwa, Ryuji Inai, Science Ltd
Composite Structures, 55, , 407-417 Hiroyuki Hamada
Effect of Hybrid Layers with Different Jang-kyo Kim, Man-Lung Elsevier 2001.08
Silane Coupling Agents on Impact Sham, Min-Seok Sohn, Science Ltd
Response of Glass Fabric Reinforced Hiroyuki Hamada
Vinylester Matrix Composites,
Polymer, 42, ,7455 7460
Effects of Surface Treatment and J. K. Kim, M. L. Sham, H. Elsevier 2002.02
Weave Structure on Interlaminar Hamada, Y. Hirai, K. Science Ltd
Fracture Behaviour of Plain Glass Fujihara, H. Saidpour, M.
Woven Fabric Composites:Part Sezen, P. Krawczak, R.
II.Report of the 2nd Round Robin Test Bequignat, J. Pabiot, S.
Results, Composite Interfaces, 9, 2, Pinter, G. Banhegyl, C. Y.
207-218 Yue, K. Padmanabhan, Y.
Suzuki, K. Schulte, J. K.
Karger-kocsis, L. Ye and J.
J. Lesko
Static and Dynamic Properties of Tsuyoshi Nishiwaki, Akio Elsevier 2002.03
Unidirectional CFRP Laminates with Tange, Kazuo Kitagawa Science Ltd
Flexible Interphase, Composite and Hiroyuki Hamada
Interfaces, 9, 3, 247-258
Fractography of Mode I Crack M. Mizoguchi, Y. Ma, K. 2002.01
Propagation in Glass Cloth/Vinylester Inomata, K. Kitagawa, Y.
Composite, Science and Engineering of Fujii, H. Hamada and M.
Composite Materials, 10, 1, 29-34 Kotaki
5. Subject, etc. Author Publisher Year / Month
Effect of Fiber Surface Treatment on Yuji Higuchi, Tadayoshi 2002.08
Mechanical Properties of Simizu, Machiko
Polyethylene/Epoxy Composites, Mizoguchi, Tatsuro Fukui
Polymer Composites, 10, 8, 589-597 and Hiroyuki Hamada
Durability and Degradation on Y. Fujii, M. Mizoguchi and 2002.04
Mechanism of E and ECR Glass H. Hamada
Reinforced Vinylester Resin under
Acid and Alkali, Durability Analysis of
Composites Systems 2001, 137-140
Fractography of Degraded Composites Y. Koyama, M. Mizoguchi, 2002
under Acid Environments, Durability H. Hamada and Y. Fujii
Analysis of Composites Systems 2001,
311-315
Investigation of the Degraded GFRP M. Mizoguchi, H. Hamada 2002
Stack, Durability Analysis of and Y. Fujii
Composites Systems 2001, 341-344
Effect of Surface Treatment Condition Miaki Shibaya, Machiko Elsevier 2002.04
on Interfacial Degradation Behavior in Mizoguchi, Hiroyuki Science Ltd
GFRP under Acidic, Composite Hamada and Yoshimichi
Interface, 9, ,433-444 Fujii
Experimental Investigation on the R. Inai, E C Chirwa, H. 2003.05
Crushing Properties of Carbon Fibre Saito, T. Uozumi, A. Nakai
Braided Composite Tubes, IJ Crash and H. Hamada
2003, 8, 5, 513-521
Initial Fracture Behavior of Satin Toshiko Osada, Asami Elsevier 2003.09
Woven Fabric Composites, Nakai and Hiroyuki Science Ltd
COMPOSITE STRUCTURES, 61, , Hamada
333-339
Performance Study of Braided K. Fujihara, Zheng-Ming Elsevier 2003
Carbon/PEEK Composite Compression Huang, S. Ramakrishna, K. Science Ltd
Bone Plates, Biomaterials, 24, ,2661- Satknanantham and H.
2667 Hamada
Prediction of Flow Patterns in the Tetsuo Mitani and Hiroyuki 2003.09
Polyurethane Foaming Process by Numerical Hamada
Simulation Considering Foam Expansion,
POLYMER ENGINEERIING AND
SCIENCE, 43, 9, 1603-1611
Flow Behavior of Sandwich Injection D. Watanabe, U. S. Ishiaku, T. 2003.02
Molding in Sequential and Simultaneous Nagaoka, K. Tomari and H.
6. Injection, International Polymer Processing, , Hamada
2 , 199-203
Subject, etc. Author Publisher Year / Month
Annealing Effect in Glass Woven Fabric M. Kotaki, T. Kuriyama, H. Elsevier 2001.05
Composites, PartII. Bending Properties, Hamada, Z. Maekawa and I. Science Ltd
Composite Interfaces, 7, (5,6),385-387 Narisawa
Interfacial Properties of PP/PP Composites, T. Kitayama, S. Utsumi, H. 2003.04
Journal of Applied Polymer Science, Hamada, T. Nishino, T.
88, ,2875-2883 Kikutani, H. Ito
Development of Braided Carbon/Peek K. Fujihara, Zheng-Ming 2001.04
Composite Bone Plates, Advanced Huang, S. Ramakrishna, K.
Composites Letters, 10, ,13-20 Satkunanantham and H.
Hamada
Feasibility of Knitted Carbon/PEEK K.Fujihara, Zheng-Ming Elsevier 2004
Composites for Orthopedic Bone Plates, Huang, S.Ramakrishna, Science Ltd
Biomaterials, 25, , 3877-3885 K.Satknanantham ,H.Hamada
Fabrication and Mechanical Properties of Higuchi Yuji, Nakai Asami, 2004.04
PE/PE Interface-less Composites using Hamada Hiroyuki
Micro-braiding, Polymers Polymer
Composites, 12, 4, 321-332
Mechanical Properties and Internal Structure Susumu Takashima, Machiko 2003.05
of Injection Molded Glass Fiber Reinforced Mizoguchi, U. S. Ishiaku and
PC/ABS, ANTEC 2003, 1530-1534 Hiroyuki Hamada
Relationship Between Mechanical Properties Susumu Takashima, Machiko 2003.05
and Internal Structure of PC/ABS Blend Mizoguchi, U.S. Ishiaku and
Injection Moldings Through Thickness Hiroyuki Hamada
Direction, ANTEC 2003, 1535-1539
7. The Effect Ambient Moisture and U. S. Ishiaku, H. Hamada, M. 2003.04
Temperature Conditions on the Mechanical Mizoguchi, S. Takashima, W.
Properties of Glass Fiber/Carbon Fiber/Nylon S. Chow and Z. A. Mohd Ishak
6 Sandwich Hybrid Composites Consisting of
Skin-Core Morphologies, ANTEC 2003,
2142-2146
Microstructure of Injection Molded Glass Bin Yang, Shinya Otsuki and 2003.05
Fiber Reinforced PC/ABS, Annual Technical Takashi Kuriyama,Susumu
Conference on Society of Plastic Engineers Takasima,Hiroyuki Hamada
2003, 3570-3574
Influence of Geometric Shape of Void on Akihiko Goto, Kazumi 2003.05
Mechanical Properties of Polyurethane Foam, Yamaguchi and Hiroyuki
ANTEC 2003, 3575-3578 Hamada
Subject, etc. Author Publisher Year / Month
Effect of Interphase Condition on Mechanical Machiko Mizoguchi, Satoko 2003.05
Properties in Polyamide Pre-Impregnated Baba, Hiroyuki Hamada and
Glass Fiber Reinforced Polypropylene Weiliing Wu
Composite, ANTEC 2003, 3732-3733
The properties of GF-Reinforced M. Nomura, J. Makita and H. 2003.07
Thermoplastics in Beam Structure, Polymer Hamada
& Polymer Composites, 11, 7, 581-589
Structure and Mechanical Properties of Fumiaki Baba, Akihiro Fujita, 2004.03
Injection Molded CF/LCP Thin Plates, Chimyon Gon, Asami Nakai
Polymers Polymer Composites, 12, 3, and Hiroyuki Hamada
207-220
The Effect of Injection speed on the Weld U. S. Ishiaku, Y. W. Leong, O. 2004.05
Line Properties of Jute FIBER/POLY A. Khondker, A. Nakai and H.
(Butylene) Succinate Biodegradable Hamada
Composites., ANTEC 2004, 1468
8. Mechanical Properties of Injection Molded Susumu Takashima, Satoko 2004.05
Glass Fiber Reinforced PC/ABS with PC- Baba and Hiroyuki Hamada
Oligomer, ANTEC 2004, 1907
Fabrication, Processing and Tensile Omar A Khondker, Tatsuro 2004.05
Properties of Weft-Knitted Hybrid Fukui, Xinyu Yang, Asami
Composites Combining Microbraiding and Nakai and Hiroyuki Hamada
Compression Molding Techniques, ANTEC
2004, 2683
Co-Injection Molding in Metal Injection Kenji Okubo, Shigeo Tanaka, 2004.05
Molding, ANTEC 2004, 570 Hiroyuki Hamada
Fabrication and Mechanical Properties of Tatsuro Fukui, Miyako Inoda, 2004.05
Textile Insert Injection Moldings, ANTEC Asami Nakai, Hiroyuki
2004, 667 Hamada
Effect of Deformational Behavior of Cell Akihiko Goto,Kazumi 2004.05
Structure on Mechanical Properties of Yamaguchi,Hiroyuki Hamada
Polyurethane foam under Compressive
Loading, ANTEC 2004, 2009
Mechanical Properties of PC/ABS Ultra Satoko Baba, Susumu 2004.05
High-Speed Injection Moldings, ANTEC Takashima, Yew Wei Leong
2004, 1917 and Hiroyuki Hamada
Machiko.Mizoguchi and
Takashi Kuriyama
Subject, etc. Author Publisher Year / Month
Structure and Mechanical Properties of Glass Machiko Mizoguchi and 2004.05
Fiber Reinforced PC/ABS Fabricated by Takashi Kuriyama Susumu
Ultra High Speed Injection Molding, Annual Takashima, Satoko
Technical Conference on Society of Plastic Baba,Hiroyuki Hamada
Engineers 2004, 2869-2873
9. Evaluation of Weldline Strength of Injection Kohji Yamada, Kiyotaka 2004.04
Molded Polystyrene by Surface Milling, Tomari, Toshihiko Harada
ANTEC 2004, 708-712 Hiroyuki.Hamada
Compounding order and Mechanical T. Okumura, H. Hamada 2004
Properties
in PP/PE/TALC Compound, Proceeding of
ANTEC 2004, 2728-2732
Effect of Heat-Sealing Temperature on Yasuo Hashimoto, Tsujii 2004.04
Tetsuya, Kitagawa Kazuo,
Mechanical Properties at Heat-Sealed Parts in
Biodegradable Plastic Film, Proceeding of Machiko Mizoguchi, Yasuhiro
ANTEC 2004, 2447-2451 Fujita, Hiroyuki Hamada,
Umaru.S.Ishiaku
Internal Structure of PC/ABS Injection- Hiroyuki Hamada, Kengo 2004.05
Compression Moldings, ANTEC 2004, 732 Nodo, Susumu Takashima and
Satoko Baba,
Machiko.Mizoguchi and
Takashi Kuriyama,Kiyotaka
Tomari
Mechanical and Morphological Properties of U.S. Ishiaku, Y. W. Leong, H. 2004
Kevlar-Fiber Reinforced Polyamide 6,6 Hamada
(PA66) Composites, Proceeding of ANTEC
2004, 2971-2975
Mechanical Properties of Weldline in Koji Yamada, Satoko Baba, 2004
Injection Molded PC/ABS, Proceeding of Susumu Takashima, Hiroyuki
ANTEC 2004, 718-722 Hamada, Machiko Mizoguchi,
Takashi Kuriyama
Processing and Mechanical Properties of Asami Nakai, Tsutomu 2004
Continuous Fiber Reinforced Thermoplastics, Narita,Eisuke Fukui, Iwao
Proceeding of ANTEC 2004, 1593-1596 Komiya, Hiroyuki Hamada
Interfacial Properties of FILM-Insert Y. W. Leong, T. Fukui, M. 2004.03
10. Injection Molded Polyethylene- Mizoguchi, U. S. Ishiaku, H.
FILM/Polyethylene Matrix, Proceeding of Hamada
ANTEC 2004, 1154-1157
Subject, etc. Author Publisher Year / Month
Mechanical Properties of Carbonized H. Matsui, K. Kitagawa, T. 2004
Bamboo Fiber Reinforced Biodegradable Semba, H. Okumura, U. S.
Polymer Composite., Proceeding of ANTEC Ishiaku, H. Hamada
2004, 1636-1640
Prediction of Mechanical Properties of SMC Masahide Kawamura, Asami 2004.04
Parts, Proceeding of ANTEC 2004, 1390- Nakai and Hiroyuki Hamada
1394
The Effect of Molding Condition on S. Yamaguchi,M. Mizoguchi, 2004.04
Interfacial Mechanical and Morphological H. Hamada, Y. W. Leong,U. S.
Properties of Film Insert Injection Molded Ishiaku, T. Tsujii
PPFILM/PP Matrix, Proceeding of ANTEC
2004, 1144-1148
Surface Smoothness of Glass Mat Reinforced Susumu Yamaguchi, Etsuko 2004.04
Polypropylene Stampable Sheet, Polymers Tanigaki and Hiroyuki Hamada
Polymer Composites, 12, 4, 333-339
Initial Fracture of the Welt Weft-Knitted O.A.Khondker, T.Fukui, Elsevier 2004
Textile Composites, Composites partA, A.Nakai, H.Hamada Science Ltd
35, ,1185-1194
Fabrication and Mechanical Properties of O. A. Khondker, T. Fukui, M. Elsevier 2004.04
Aramid/Nylon Plain Knitted Composites, Inoda, A. Nakai, H. Hamada Science Ltd
Composites partA, 35, ,1195-1205
Measurements and Prediction of the O. A. Khondker, I.. Herszberg, Elsevier 2004.02
Compression-After-Impact Strength of Glass H. Hamada Science Ltd
Knitted Textile Composites, Composites
partA, 35, 2, 145-157
Influence of Processing Conditions on K. Fujihara, Zheng-Ming Elsevier 2004.04
11. Bending Property of Continuous Carbon Huang, S. Ramakrishna, H. Science Ltd
Fiber Reinforced PEEK Composites, Hamada
Composite Science and Technology,
64, ,2525-2534
The Effect of Molding Conditions on Y. W. Leong, S. Yamaguchi, 2004.12
Mechanical and Morphological Properties at M. Mizoguchi, H. Hamada, U.
the Interface of Film Insert Injection Molded S. Ishiaku and T. Tsujii
Polypropylene-Film/Polypropylene Matrix,
Polymer Engineering and Science, 44,12,
2327-2334
Subject, etc. Author Publisher Year / Month
Impact and Compression-After-Impact O. A. Khondker, K. H. Leong, 2005.04
Performance of Weft-Knitted Glass Textile I. Herszberg, H. Hamada
Composites, Composites PartA:Applied
Science and Manufacturing, , 36 ,638-648
Effect of the Braiding angle on the Energy M. Okano, K. Sugimoto, H 2005.02
Absorption Properties of a Hybrid braided Saito, A. Nakai, and H.
FRP Tube, Journal of Materials: Design and Hamada
Applications, 219 1,59-66
Tensile Strength and Fiber/Matrix Interfacial Hiroshi Hatta, Ken 2005.05
Properties of 2D -and 3D-carbon/Carbon Goto,Shinya Ikegaki, Itaru
Composites, Journal of the European Kawahara, Mohamed S.Aly-
Ceramic Society, Vol.25,No.4,P535-542 Hassan, Hiroyuki Hamada
Microstructure and Fracture Behavior of S. Solomon, A. Abu Bakar, Z. 2005.08
(Co)Injection-Molded Polyamide 6 A. Mohd Ishak, U. S. Ishiaku,
Composites with Short Glass/Carbon Fiber Hiroyuki Hamada
12. Hybrid Reinforcement, Journal of Applied
Polymer Science, vol.97,No.3,P957-967
The Effect of Ambient Moisture and U. S. Ishiaku, H. Hamada, M. 2005.04
Temperature Conditions on the Mechanical Mizoguchi, W. S. Chow, Z. A.
Properties of Glass Fiber/Carbon Fiber/Nylon Mohd Ishak
6 Sandwich Hybrid Composite Consisting of
Skin-Core Morphologies, Polymer
Composites 2005, ,
A New Evaluation Method of Adhesion Naoto Ikegawa, Hiroyuki Design and 2000.03
between Glass/Epoxy Composite Substrate Hamada and Masahiro Manufacturin
and Copper Foil for Multilayer Circuit Board Yamanouchi g of
Applications, Design and Manufacturing of Composites
Composites, 3, , 37-42
Evaluation of Adhesion between Masahiro Yamanouchi, 2000.03
Glass/Epoxy Composites and Copper Foils Hiroyuki Hamada, Naoto
of Printed Circuit Board using a Fracture- Ikegawa, Mikio Masui,
mechanics Approach, Design and Kimiaki Nakata and Keiji
Manufacturing of Composites, 3, ,43-48 Higashi
Energy Absorption Performances and Ryuji Inai, Hiroshi Saito, Koji 2000.03
Fracture Mechanisms of Braided Kameo, Tadashi Uozumi,
Pultruded Composite Rods, Design and Masaharu Iwamoto, Hiroyuki
Manufacturing of Composites, 3, ,83-87 Hamada
Subject, etc. Author Publisher Year / Month
Longitudinal Compressive Strengths in Pan- N. Oya, D. J. Johnson and H. 2000.03
Based Carbon Fibers,, Design and Hamada
Manufacturing of Composites, 3, ,97-104
Fractography of Mode I Crack Propagation in Machiko Maeda, Y.Ma, 2000.03
Glass Cloth/Vinylester Composite, Design K.Inomata, Kazuo Kitagawa,
and Manufacturing of Composites, 3, ,164- Yoshimichi Fujii, Hiroyuki
13. 168 Hamada
Energy Absorption Properties of Composite, Hiroshi Saito, Ryuji Inai, Koji 2000.03
Design and Manufacturing of Composites, Kameo, Hiroyuki Hamada
3, ,198-202
Numerical Optimum Method for Injection A. Takafuji, T. Kubo, A. 2000.03
Molding Considering Design Information, Yokoyama, H. Hamada
Design and Manufacturing of Composites,
3, ,325-329
Development of Textile Composites Yasutomo Uesuji, Hiroyuki 2000.03
Impregnated with Dicyclopentadiene Resin, Hamada, Toshiko Osada,
Design and Manufacturing of Composites, Kazuo Kitagawa, Asami Nakai,
3, ,375-380 Nobuo Takeda
Mechanical Properties of in-situ Fiber Takeshi Semba, Kazuo 2000.03
Reinforced Composites form Blends Kitagawa and Hiroyuki
Containing Polyethylene with Poly- Hamada
caprolactam, Design and Manufacturing of
Composites, 3, ,395-399
Potentiality of Continuous Fiber Reinforced Koji Kameo, Georg Bechtold, 2000.03
Thermoplastic Composites, Design and Hiroyuki Hamada and Klaus
Manufacturing of Composites, 3, , 408-412 Friedrich
Study on in-situ Fiber Reinforced T. Semba and K. Kitagawa, H. 2002.04
Composites: Polyolefin/Polycaprolactone Hamada
Blend, Design and Manufacturing of
Composites, 4, ,176-183
Study on in-situ Fiber Reinforced T. Semba and K. Kitagawa, H. 2002.04
Composites: Polyolefin/Polycaprolactone Hamada
Blend, Design and Manufacturing of
Composites, 4, ,176-183
Void Evaluation of Polyurethane foam Akihiro Goto,Kazumi 2002.04
Materials by Image Processing Technology, Yamaguchi and Hiroyui
Design and Manufacturing of Composites, Hamada
14. 4, ,192-196
Subject, etc. Author Publisher Year / Month
Fiber Orientation and Mechanical Properties Akihiro Fujita and Fuiaki Baba, 2002.04
of Injection Molded CF/LCP Thin Plates, Chmyon Gon, Daisuke
Design and Manufacturing of Composites, Watanabe, Asami Nakai,
4, ,197-204 Hiroyuki Hamada
Microscopic Observation of Initial Fracture Toshiko Osada, Asami Nakai, 2002.09
in Textile Composites, Design and Hiroyuki Hamada
Manufacturing of Composites, 4, ,205-212
Fabrication and Mechanical Property of Long Asami Nakai, Hiroyuki 2002.09
Fiber Reinforced Thermoplastic Composites Hamada, Dai Nakaami
using Braiding Technique, Design and
Manufacturing of Composites, 4, ,221-228
Fabrication and Mechanical Properties of Asami Nakai, Hiroyuki 2002.09
Textile Reinforced SMC, Design and Hamada, Takeshi Ohkawa
Manufacturing of Composites, 4, ,229-236
Environmental Effects on E-Glass and C- Toru Morii, Hiroyuki Hamada, 2002.09
Glass Fiber Reinforced Vinylester Machiko Mizoguchi.
Composites, Design and Manufacturing of Yoshimichi Fujii
Composites, 4, ,429-436
The Effect of Heat Sealing Temperature on Tetsuya Tsujii, U. S. Ishiaku, 2005.12
the Properties of OPP/CPP Heat Machiko Mizoguchi, Hiroyuki
Seal.I.Mechanical Properties, Journal of Hamada
Applied Polymer Science, Vol.97,No.3,P753-
760
Axial Crushing Performance of Braided Masanori Okano, Asami Nakai, 2005.05
Composite Tubes, International Journal of Hiroyuki Hamada
15. Crashworthiness, 10,3,287-293
The Effect of Crosslinking on the Mechanical Takeshi Semba, Kazuo 2005.04
Properties of PLA/PCL Blend, Proceeding of Kitagawa,Umaru Semo Ishiaku
Annual Technical Conference on Society of and Hiroyuki Hamada
Plastic Engineers 2005, 2423-2427
Mechanical Properties of Textile-inserted Omar A. Khondker, Xinyu 2005.05
PP/PP Knitted Composites., Annual Yang , Nobuhiro Usui, Asami
Technical Conference on Society of Plastic Nakai1 and Hiroyuki Hamada
Engineers 2005, 1554-1558
Effect of Heat Sealing Temperature on the U. S. Ishiaku, Yasuo 2005.05
Fracture Aspects of OPP/CPP Seal., Hashimoto, Tsujii Tetsuya,
Proceeding of Annual Technical Conference Hiroyuki Hamada
on Society of Plastic Engineers 2005, 1075-
1079
Subject, etc. Author Publisher Year / Month
Properties of Injection Molded Amorphous Takayuki Inuzuka, Akihiro 2005.04
Polymer for Punching., Proceeding of Annual Fujita, Asami Nakai, Hiroyuki
Technical Conference on Society of Plastic Hamada
Engineers 2005, 1871-1875
Cellular Anisotropy in Mechanical Properties Akihiko Goto, Kazumi 2005.05
of Polyurethane Foam., Proceeding of Yamaguchi, Umaru S. Ishiaku
Annual Technical Conference on Society of & Hiroyuki Hamada
Plastic Engineers 2005, 1780-1783
Analysis of Interface of Two Layer Molded Shingo Asai, Shinichi 2005.05
Product by Simultaneous Composite Hadehara and Hiroyuki
Injection Molding., Proceeding of Annual Hamada
Technical Conference on Society of Plastic
Engineers 2005, 2208-2212
Evaluation of Adjacent Flow Weldline in Koji Yamada, Kiyotaka 2005.05
16. PC/ABS., Proceeding of Annual Technical Tomari, Satoko Baba, Umaru
Conference on Society of Plastic Engineers Semo Ishiaku, Hiroyuki
2005, 791-795 Hamada
Hygrothermal Aging of Recycled-PET Y. W. Leong, X. Yang, S. 2005.05
Sandwich Injection Moldings., Proceeding of Nagata, N. Kunimune, H.
Annual Technical Conference on Society of Hamada
Plastic Engineers 2005, 3200-3203
Hygrothermal Aging of Glass and Carbon Y. W. Leong, U. S. Ishiaku, H. 2005.05
Fiber Reinforced Nylon 6 Sandwich Injection Hamada
Moldings., Annual Technical Conference on
Society of Plastic Engineers 2005, 1509-1513
Mechanical Properties of Square Braided Takahisa Ueda, Akio Ohtani, 2002.11
Fabric, Proceedings of ASME International Asami Nakai, Hiroyuki
Mechanical Engineering Congress & Hamada
Exposition, 1-5
Fabrication and Mechanical Properties Omar A. Khondker, Umaru S. 2005.04
of Unidirectional Jute/PP Composites Using Ishiaku, Asami Nakai and
Jute Yarns by Film Stacking Method, Journal Hiroyuki Hamada
of Polymers and the Environment, 13,2,115-
126
Fracture Toughness Evaluation of Adjacent Koji Yamada,Kiyotaka Tomari, 2005.04
Flow Weld Line in Polystyrene by the SENB Umaru Semo Ishiaku,Hiroyuki
Method, Polymer Engineering Science, Hamada
45,8,1059-1066
Subject, etc. Author Publisher Year / Month
Characterization of Knitted Fabric Xinyu Yang, Nobuhiro Usui, 2006.05
Reinforced PP/PP and GF/PP Composites, Takeo Kitayama, Shigeyoshi,
Proceeding of Annual Technical Conference Matubara, Asami Nakai and
on Society of Plastic Engineers 2006, 5-9 Hiroyuki Hamada
17. Effect of Molecular Weight on the Interfacial H. Okumura, R. Yoshida, U. S. 2006.05
Properties of GF/PP Injection Molded Ishiaku, A. Nakai, H. Hamada
Composites, Annual Technical Conference
on Society of Plastic Engineers 2006, 173-
177
Mechanical Properties of PP/PA/GF Naoyuki Kawai, Asami Nakai, 2006.05
Blend Thermoplastics, Proceeding of Annual Hiroyuki Hamada, Hiroshi
Technical Conference on Society of Plastic Yasuda
Engineers 2006, 182-185
Fracture Characteristics of CF and GF S. Solomon,Y. W. Leong, Z. A. 2006.05
Reinforced PA6 Sandwich Moldings, Mohd, U. S. Ishiaku, H.
Proceeding of Annual Technical Conference Hamada
on Society of Plastic Engineers 2006, 680-
684
Interfacial Characteristics in Film Insert Y. W. Leong, S. Yamaguchi, 2006.05
Molded PC/ABS and PC Film, Proceeding of U. S. Ishiaku, H. Hamada
Annual Technical Conference on Society of
Plastic Engineers 2006, 741-745
Evaluation of Weldline in Polycarbonate by Koji Yamada, Kiyotaka 2006.05
Laser Raman Spectroscopy, Annual Tomari, Umaru Semo Ishiaku,
Technical Conference on Society of Plastic Hiroyuki Hamada
Engineers 2006, 1108-1112
Effect of Specimen Thickness on PC/ABS N. O-Charone, S. Pivsa-Art, Y. 2006.05
Spiral Flow Injection Mo dings, W. Leong, K. Umemura, M.
Annual Technical Conference on Society of Kotaki, H. Hamada, Shigeyoshi
Plastic Engineers 2006, 1123-1127 Matubara, Asami Nakai and
Hiroyuki Hamada
In Mold Punching -Processing and Takayuki Inuzuka, Akihiro 2006.05
Mechanical Properties, Annual Technical Fujita, Asami Nakai, Hiroyuki
Conference on Society of Plastic Engineers Hamada
2006, 1205-1209
18. Numerical Simulation and Experimental Shigeo Tanaka, Kensuke Taira, 2006.05
Study on Metal Injection Molding, Annual Kenji Okubo, Hiroshi Ito,
Technical Conference on Society of Plastic Hiroyuki Hamada
Engineers 2006, 1220-1224
Subject, etc. Author Publisher Year / Month
Interfacial Characteristics in Film Insert Y. W. Leong, S. Yamaguchi, 2006.05
Molded PC/ABS and PC Film, Proceeding of U. S. Ishiaku, H. Hamada
Annual Technical Conference on Society of
Plastic Engineers 2006, 741-745
Influence of Compounding Conditions on Noriaki Kunimune, Hiroyuki 2006.05
Mechanical Properties of Recycled Inoya, Shigeyuki Nagata,
Poly(Ethylene Terephthalate , Annual Kazushi Yamada, Masaya
Technical Conference on Society of Plastic Kotaki and Hiroyuki Hamada
Engineers 2006, 1455-1458
Impact Properties of Recycled PET Prepared Noriaki Kunimune, Hiroyuki 2006.05
by Reactive Compounding, Annual Technical Inoya, Shigeyuki Nagata,
Conference on Society of Plastic Engineers Kazushi Yamada, Masaya
2006, 1459-1462 Kotaki and Hiroyuki Hamada
Influence of PC-oligomer Content in Sungeon Kim, Kazutoshi 2006.05
PC/ABS Blend Injection Moldings, Annual Umemura, Toshihiro Yoshida,
Technical Conference on Society of Plastic Masaya Kotaki and Hiroyuki
Engineers 2006, 2150-2153 Hamada
Effect of Compounding Procedure on Takeshi Senba, Kazuo 2006.05
Mechanical Properties of PLA/PCL Blends, Kitagawa, Umaru Semo
Annual Technical Conference on Society of Ishiaku and Hiroyuki Hamada
Plastic Engineers 2006, 2159-2163
Effect of Heat-Sealing Temperature and Yasuo Hashimoto, Tsujii 2006.05
Holding Time on Mechanical Properties of Tetsuya, Kitagawa Kazuo,
Heat-Sealed Poly(Lactic Acid)Films, Annual Machiko Mizoguchi, Yasuhiro
Technical Conference on Society of Plastic Fujita, Hiroyuki Hamada,
19. Engineers 2006, 2221-2225 Umaru.S.Ishiaku
Fracture Behavior of Heat-Sealed Reiichi Konishi, Yasuo 2006.05
Poly(Lactic Acid) Films, Annual Technical Hashimoto, Yumi Hashimoto,
Conference on Society of Plastic Engineers Masanori Anan, Tetsuya Tsujii,
2006, 2231-2235 Mitsuhiko Morimoto, Kazuo
Kitagawa, Umaru S. Ishiaku,
Masaya Kotaki and Hiroyuki
Hamada
Fabrication of Composite Pipe with Recycled Masanori Anan Takahiro 2006.05
Polycarbonate and Crushed FRP Products, Okamoto, Hiroaki Okumura,
Annual Technical Conference on Society of Asami Nakai and Hiroyuki
Plastic Engineers 2006, 2501-2505 Hamada
Subject, etc. Author Publisher Year / Month
Replication of Injection Molded Parts with Osamu Murakami, Kazushi 2006.05
Micro-Scale Features, Annual Technical Yamada, Masaya Kotaki and
Conference on Society of Plastic Engineers Hiroyuki Hamada,
2006, 2526-2530
Mechanical Properties of Foamed PP Sheet, Yasuhiro Nishikawa, Xinyu 2006.05
Annual Technical Conference on Society of Yang Seiichiro Hisaka, Asami
Plastic Engineers 2006, 2765-2769 Nakai, Hiroyuki Hamada
Prediction of Modulus by Considering Kazumi Yamaguchi, Akihiro 2006.05
Distribution of Cell Shape, Annual Technical Goto, Umaru Semo Ishiaku,
Conference on Society of Plastic Engineers Hiroyuki Hamada
2006, 2795-2798
Hygrothermal Ageing of GF/PP Injection T. Yoshida, H. Okumura, A. 2006.05
Molded Composites, Annual Technical Nakai, U. S. Ishiaku, H.
Conference on Society of Plastic Engineers Hamada
2006, 178-181
Fracture Behavior of Heat-Sealed PP Films Yasuhiro Nishikawa,Yasuhiro 2006.05
20. under Static and Creep Loadings, Annual Fujita, Sommai Pivsa-Art
Technical Conference on Society of Plastic Asami Nakai,Masaya
Engineers 2006, 2226-2230 Kotaki,Hiroyuki Hamada
Effect of Surface Treatment on Mechanical Yasuhiro Nishikawa, Asami 2006.05
Properties of GF/Phenol Composite, Annual Nakai, Hiroyuki Hamada,
Technical Conference on Society of Plastic Takeshi Okayama, Naoki Uota,
Engineers 2006, 2811-2815 Yasunari Kuratani
The Effect of Crosslinking on the Mechanical Takeshi Semba, Kazuo 2006.05
Properties of Polylactic Acid/ Kitagawa, Umaru Semo
Polycaprolactone Blends, Journal of Applied Ishiaku, Hiroyuki Hamada
Polymer Science, 101, ,1816-1825
The Effect of Molecular Weight on the T. Yoshida, U. S. Ishiaku, H. 2006.05
Interfacial Properties of GF/PP Injection Okumura, S. Baba, H. Hamada
Molded Composites, Composites Part A,
37, , 2300-2306
Jute-Polyester and Jute-Epoxy Composites-A S. Sahoo, U. S. Ishiaku, A. 2006.08
Comparative Analysis, Design, Nakai, H. Hamada
Manufacturing and Applications of
Composites, 22-30
Mechanical Properties of CF/GF Fiber Tomohiko Sugie, Asami Nakai, 2006.08
Hybrid Multi-axial Warp Knitted Fabric Hiroyuki Hamada, Akira
Epoxy Composite Materials, Design, Kasuya
Manufacturing and Applications of
Composites, 160-167
Subject, etc. Author Publisher Year / Month
Effect of Resins on Crack Propagation of Y. Takai, N. Kawai, A. Nakai, 2006.08
Long-Fiber Reinforced Thermoplastic H. Hamada
Composites, Design, Manufacturing and
Applications of Composites, 196-201
21. Mechanical Performance of Composite with Hisashi Mizuno, Kenichi 2006.08
L-Joint, Design, Manufacturing and Sugimoto, Asami Nakai,
Applications of Composites, 286-294 Hiroyuki Hamada
Future-applied Conventional Technology, H. Hamada, A. Nakai, Naokazu 2006.08
Engineering and Science, Design, Miyamoto
Manufacturing and Applications of
Composites, 297-299
Degradation Behavior of Natural Fiber Filled S. Toyoyama, S. Sahoo, M. 2006.08
Composites, Design, Manufacturing and Kotaki, A. Nakai, U. S. Ishiaku
Applications of Composites, 300-304 H. Hamada
Proposal of Design Method for GFRP Pipe E. Kitagawa, A. Nakai, H. 2006.08
using SMC, Design, Manufacturing and Hamada
Applications of Composites, 336-342
Nondestructive Inspection Using Ultrasonic K. Sugimoto, Y. Fujii, A. 2006.08
of Degraded GFRP, Design, Manufacturing Nakai, H. Hamada
and Applications of Composites, 423-431
Sandwich Injection Molding of Yuji Fujita, Toshihiro Yosida, 2007.05
Polypropylene and Biodegradable Polymer, Hironari Sano, Masaya Kotaki,
Proceeding of Annual Technical Conference Hiroyuki Hamada
on Society of Plastic Engineers 2007, 2375-
2377
Distribution of Minor Phase Components and Y. W. Leong, H. Hamada 2007.05
Its Influence on the Film-Substrate Interface
in Film Insert Moldings, Proceeding of
Annual Technical Conference on Society of
Plastic Engineers 2007, 752-759
Evaluation of Oriented Polypropylene/Cast Yumi Hashimoto, Yasuo 2007.05
Polypropylene Film at the Heat-Sealing Part Hashimoto, Yew Wei Leong,
and the Edge, Proceeding of Annual Kazushi Yamada, Hiroyuki
Technical Conference on Society of Plastic Hamada
Engineers 2007, 1010-1013
22. Subject, etc. Author Publisher Year / Month
Effect of Cell Shape on Mechanical Kazumi Yamaguchi, Akihiro 2007.05
Properties of Polyurethane Foams Molded Goto, Asami Nakai, Hiroyuki
under Several Conditions, Proceeding of Hamada
Annual Technical Conference on Society of
Plastic Engineers 2007, 1483-1487
Mechanical Properties and Morphology of Yuka Kobayashi,Yew Wei 2007.05
PMMA Grafted Silica/PMMA Injection Leong, Makoto Sarata,
Molded Composites, Proceeding of Annual Hiroyuki Hamada, Kazushi
Technical Conference on Society of Plastic Yamada, Masaya Kotaki, Kohji
Engineers 2007, 2000-2004 Yoshinaga, Hiroyuki
Karakawa, Hiroshi Ito,
Kunihiko Kazama, Takeshi
Kikutani
Effect of Molding Conditions on Morphology T. Ohta, Y. W. Leong, K. 2007.05
and Structure of Recycled-Pet, Proceeding of Yamada, H. Hamada
Annual Technical Conference on Society of
Plastic Engineers 2007, 2272-2275
Hierarchical Structure Developed in PC/ABS N. O-Charoen, Y. W. Leong, 2007.05
Closed Spiral Flow Injection Molding, M. Kotaki, H. Hamada
Proceeding of Annual Technical Conference
on Society of Plastic Engineers 2007, 2375-
2377
Dynamic Mechanical, Thermal and Fracture T. Uemura, S. Kim, Y. W. 2007.05
Toughness Properties of PC/ABS Blend Leong, O. B. Ogazi, K.
System with Incorporation of PC-Oligomer, Yamada, H. Hamada
Annual Technical Conference on Society of
23. Plastic Engineers 2007, 2370-2374
Effect of Fiber Content and Alkali treatment U. S. Ishiaku, X. Y. Yang, Y. 2007.04
on the Mechanical and Morphological W. Leong, H. Hamada, T.
Properties of Poly(lactic Semba, K. Kitagawa
acid)/Poly(caprolactone)Blend jute Fiber-
Filled Biodegradable Composites, Journal of
Biobased Materials and Bioenergy, 1,1,78-86
5) ผลงานทางสังคม
2000 : Chairman 3rd joint Canada-Japan Workshop on Composites
1998 : Chairman 4th International Symposium of TEXCOMP
1998 : Organizing Committee 14th Polmer Processing Society(PPS)
1997 : Best Paper Award (two Papers) of the Composite Institute USA
1966 : Best Paper Award of Japan Reinforced Plastic Society
1995 : Best Paper Award of the Society of Fiber Science and Technology Japan
1993 : Best Paper Award of Japan Society of Polymer processing
1992 : Hayashi Award of The Japan society for Composite Materials
1991 : Best Paper Award of Japan Reinforced Plastic Society
1988 : Technical Award of Textile Machinery Society of Japan
1986 : Best Paper Award of The Society of Materials Science Japan.
24. 6) ความรวมมือกับมหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี
- ทําหนาที่อาจารยที่ปรึกษาระดับปริญญาเอกใหกับ ดร.ณรงคชย โอเจริญ ภาควิชาวิศวกรรมวัสดุและโลหการ
ั
คณะวิศวกรรมศาสตร มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี, 2005.
- ทําหนาที่อาจารยที่ปรึกษาใหกบ ดร.สุภาพร ทุมสอน, ภาควิชาวิศวกรรมสิ่งทอ คณะวิศวกรรมศาสตร
ั
มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรีจบการศึกษาป 2008.
- อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 8-9 ตุลาคม 2009 (รูปภาพประกอบที่ 1)
- Chairman 2nd Rajamangala University of Technology International Conference, “Science and Technology
Development in Creative Economy”, Convention Center, Chulaborn Research Institute, Bangkok,
Thailand : 24-26 November 2010. (รูปภาพประกอบที่ 2)
- อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 15-17 ตุลาคม 2010 (รูปภาพประกอบ 3)
- ทําหนาที่อาจารยที่ปรึกษาใหกับ นายอนินท มีมนต, ภาควิชาวิศวกรรมอุตสาหการ คณะวิศวกรรมศาสตร
มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรีจบการศึกษาป 2011.
25. รูปที่ 1 Prof. Hiroyuki HAMADA สอนหัวขอ “Polymer composites”, 2009
26. รูปที่ 2 Prof. Hiroyuki HAMADA เขารวมงาน Rajamangala University of Technology International Conference,
“Science and Technology Development in Creative Economy”, Convention Center, Chulaborn Research Institute,