2011 Product Catalog

porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door port door porta door porta door
Page
1-2
3
4-5
6-19
21-27
28-29
30
31-32
33
34-35
36-37
38
39
40
41-44
45
46
47-48
49
50-51
52-63
64-68
69-71
72
73
74
75
77
78
Product Standards
Terms & Conditions
How to order & price doors, Frame onlys & Drawer fronts
Featured Door styles
Porta Door Styles
Standard Mould Types
Standard Panel Types
Door & Drawer Front edge Profiles
Drawer Front Edge Profiles
Standard Mitre Profiles
Standard "MT Profiles
Applied Mould Doors
Frame Only Designs
Mullion Specfications
Dovetail Drawer Boxes
Other Products
Custom Wall Panels
Face Frames
Louver Doors
Order Froms
Crown Mouldings
Casings
Baseboard
Chair Rail
Base Cap
Solid Crowns
Wainscot Beads
Plynths & Others
Moulding Index
porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door
porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door port door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door porta door
Table Of Contents

How to order and price Doors,
Frame onlys & Drawer Fronts
Step # 2
Round off door dimensions to the nexr higher even inch
and determine the total square footage.
EXAMPLE:
Door size: 12 3/4" x 25 1/2"
Round Up: 13 x 26
13 x 26 = 338 sq. inches, divided by 144 = 2.35 sq.ft.
Step #3
Multply the square footage by the appropriate material price to
determine the total material charge. Add design cost and any
option charges to the total material charge.
EXAMPLE:
2.35 sq. feet x $9.18 (Red Oak) = $21.57
Add door design cost (4/4) (PRP15) = 8.10
Add Options ( lip charge) = .95
Add (Polish Sand Face) = 1.00
TOTAL DOOR PRICE $31.62
Pri cing a fram e only is the same as pricing a door. However there
is one differnece in calculating the square footage. Always use 9"
as the common width of the frame regardless of the actual size.
Multiply 9" by the height to determine the square footage. Proceed
with pricing as if a normal door.
Pricing a typical drawer front is the same as pricing a door,
except there is a 1 square foot minimum material charge on drawer fronts.
You must be sure to use the appropriate design cost in this guide.
Things to know about pricing doors and Drawer Fronts
Doors carry a 2 square foot minimum charge.
Drawer fronts carry a 1 square foot minimum charge.
Doors over 24" wide and/or over 48" high single panel in either direction carry
an additional 20% charge overall.
Remember pricing options if the product is not standard. Such as, wide framing
on doors, hinge hole boring, etc.
Page 5

How to order and price Doors
Step #1.
Determine all factors involved with the type of door ordered.
Wood Type: From the material list in this product guide, choose the wood type needed.
Mould Type: Porta Door offers a wide variety of standard mould types, please indicate the mould
type desired.
4/4, or 5/4: Indicate whether ordering 4/4 (finishes to 3/4") or 5/4 (finishes to 1") material.
Panel Type: Choose the panel type required, as listed in this guide.
Door Design: Porta Door offers a wide variety of door designs to suit the tastes and design needs
for everyone. Please indicate the door design required.
Lip Type: Choose a lip profile from the variety shown in this guide.
Polish Sand: Indicate, if any, the type of polish sanding required.
Finish: If finishing is required, indicate finish color for the choices in this guide.
Indicate amount of each size, if lipped as pairs. Indicate width then height, any options necessary.
Additional Items: If any, Veneer, moulding, wine racks, etc.
Panel type
or Raise
Outside edge
profile "Lip"
Stile & Rail
Mould Type
width
Height
Page 4

Terms & Conditions
All products must be ordered by giving the exact overall size. Be sure to specify all
pertinent information per the product's specific order form. All items are custom
made to customer specifications. Cancellations and changes can only be made on
orders already in production if the material and labor costs involved are assumed by
the customer.
Acknowledgments on all orders will be mailed showing the order as it will be
produced. Acknowledgments indicate the datethe order will be completed from
production. Orders shipped via Porta Door truck will be scheduled based on truck
availability. Orders shipping via UPS, FEDEX or common carrier will ship 1 to 2 days
after completion date. Orders to be picked up "will call"will be available 1 day after
completion date. It is sthe customer's responsibility to carefully check the
acknowledgment against the order and notify Porta Door of any differences prior to the
order reaching production. Failure to notify Porta Door as indicated will absolve
Porta Door of any responsibility for errors. All telephone orders will be read back to the
customer and will be acknowledged as read. Porta Door will not accept any
responsibilities for order differences.
Lead Times are based on the type of product ordered. Simple doors, raised and
flat panel of standard design carry an 8 to 10 working day lead time. Complex doors,
Mitred, MT, Applied Moulds carry a lead time of 10 to 12 working days. Dovetail
Drawer boxes, unfinished carry a lead time of 8 to 10 working days. Finished doors
and Drawer boxes add an additional 2 working day lead time. Combined door and
drawer box orders will be scheduled to be completed at the same time. Radiused
products and non standard products will be quoted a lead time at the time of order.
Expedor is a small order and add on service available to all customers for an
additional charge of $10.00 per order. The charge is simply to be able to recoup some
of the additional expense incurred for sheduling all the additional services rendered.
Expedor orders take a next available slot in production scheduling to allow the order to
be completed and shipped in a 2 1/2 to 3 1/2 day period. The cut off for the 2 1/2
day service is 12:30 p.m. daily. Orders received after 12:30 p.m. will be processed the
following day. All Expedor orders are available for customer pick up or UPS only.
Our truck delivery is not available with Expedor.
Credit Terms of 2% 10 days, net 30, will be extended to those who qualify.
A credit application and personal guarantee must be completed and reviewed.
The debtor agrees to pay 1-1/2% service charge on all moneys owed after 30 days
from the date of invoice. The service charge will be assessed on a 30 day basis.
Customers without open account must, on orders under $350.00 pay in full.
Orders to $700.00 must pay a minimum deposit of $350.00. On orders over $700.00
must pay a 50% deposit and the time order. Order will be scheduled and deemed
ordered at the time moneys are received.
Page 3

Product Standards
Porta Door guarantees all products for sizing, squareness and warpage as
per the following: All products will be sized as ordered +/- 1/32".
All products will be squared to 1/32". All doors and drawer fronts will be
guaranteed against warpage up to 1/4" for all single panel doors up to 48" high
and 24" wide. Unless other wise specified at the time of order all doors other t
han mitred over 24" wide and 48" high will be produced 2 panels wide or high as
appropriate. All mitred doors will be produced single panel unless otherwise
specified. Unless otherwise specified in this guide, all standard frame widths are
as indicated by the drawings enclosed. All drawings are full scale, these dimensions
are true before and edge profile is applied. The frame width is reduced by 1/16"
after machining. Custom width framing is available at the customer's request.
Dovetailed boxes are available in any wood type. Maple boxes are produced
in soft maple unless otherwise specified by the customer.
All bottoms are 3/8" maple plywood unless otherwise specified. Drawer box sides
are standard 1/2" thick, 5/8" & 3/4" are available.
Drawer box bottoms are a standard 9/16" from the bottom edge of the box.
Finishing is available on all products. All stained and clear finished products
are finished with "M.L. Campbell" products.
All sealer and topcoat applications applications are applied through an air assisted
airless system and is applied at a 4.0 -5.0 film thickness. Topcoats are available in a
dull, medium and bright rubbed effect sheen. Please contact customer for exact
product specifications.
Polish Sanding is available on all doors and drawer fronts. This service
ensures the removal of all cross grain scratches and small imperfections.
It does not ensure the product is ready for finish. All polish sanded products
are sanded with grits fine enough to remove all cross grain scratches.
Further sanding may be required to match parts not produced or sanded by
Porta Door. Handling and unpacking may cause minor abrasions and may require
further sanding.
Page 2

Product Standards
Porta Door cuts only "F.A.S." and "SELECT" grade materials as graded by
the N.H.L.A. grading rules. All lumber is hand selected for consistency in quality.
"Standard" grade material should be used on orders receiving stain other than white
or a finish other than natural. The product will be matched for grain and color on
a lumber run basis. There may be grain and color variations per piece.
"Select" grade material, ensures grain and color matching per piece and throughout
the order. A select grade of material is recommended for all clear, light and white
stain finishes. Although select grade ensures grain and color matching throughout an
entire order, the color may vary from order to order as different lumber lots are used.
Select grade Cherry may have sap (white wood) on the back and machined portions of
the piece. Select Ash may have brown patches on the back and machined portions of
the piece. Products ordered with veneered panels may have color and grain that is
inconsistent with the hardwood framing around it. The veneered panel is not produced
by Porta Door, and is impossible to ensure the grain and color matching of the product
ordered.
All hardwoods and solid woods, in general, shrink and expand due to variations in
moisture levels from one environment to another. All lumber used by Porta Door is
kiln dried to 6-8% moisture content. Season and weather conditions cause movement
in the hardwood product that is sometimes visible and may be more visible in some than
others. The factors related to the movement are affected by the size of the product
(mostly the width), the environment, and finishing. Porta Door suggests for mitre
constructed doors, the climate be as dry as possible and the temperature and humidity
be controlled if possible. Mitred joints will open and close, sometimes up to 1/8",
due to the properties of hardwood.
Domestic hardwoods sometimes vary in color from one lot to the next. Summer cut
maple may sometimes be a little darker than winter cut. Maple color variations are due
to the chemical dipping process used by the mills to reduce fungus growth. Cherry
tans, just like human skin, if left inthe sun for a period of time. Cherry darkens with
age naturally, therefore cherry replacement products will not match existing products.
Red Birch and White Birch when finished clear or stained may cast ribbon effects
darker or lighter than the surrounding mass.
This coloration most times can not be seen in its raw natural and is not to be
considered a defect.
As nature provides no two trees to grow alike, it must be expected that a degree of
color, grain and texture be expected on all products.
Page 1

Featured Door Styles
PRP 15
shown with "4/4" mould
and "M" panel.
(Cope & Stick Construction)
Red Oak, Golden Oak Stain
PRP 15
shown with 4/4"M" mould
and "R" panel.
Maple Wood, Walnut Stain
Porta Door Company Inc. 65 Cogwheel Lane Seymour, Ct. 06483
(203) 888-6191 Fax (203) 888-5803 Email info@portadoor.com
www.portadoor.com
Page 6

PRP 15
shown with 4/4 "S" mould
and "Flat" panel.
Cherry Wood, Clear Finish
PRP 15
and "F" panel.
Maple Wood, Finished Clear
Please consult the " Techincal Product Guide"
in this book for a wide variety mould types
and panel raises available.
www.portadoor.com
Page 7

PRP 15
and "F" panel.
White Birch, Finished Fruitwood
www.portadoor.com
Page 8

PRP 15
shown with "P" mould
and "Flat" panel.
Maple, Finished Butternut
PRP 15
shown with "T" mould
and "Flat" panel
White Oak Wood, Finished Clear
www.portadoor.com
Page 9

PRP 15
shown with "5/4 S" mould
and "O" panel.
Paint Grade, Primed White
PRP 15
shown with "I" mould
and "Flat" panel
Red Oak Wood, Finished Clear
www.portadoor.com
Page 10

PRP 222
shown with "M" panel.
("MT" Construction)
Maple wood, finished Heartwood Cherry
PRP 201 MT
shown with "M" panel
Maple Wood, Finished Rosewood
www.portadoor.com
Page 11

5/4 PRP 228
("Cope & Stick" Construction)
shown with "Flat" panel.
Maple wood, finished Cordovan
PRP 228
shown with "C" panel
Maple Wood, Finished Golden Oak
www.portadoor.com
Page 12

PRP 200M
Door & Drawer Front Shown
with "Flat" panel
(Full Mitre Construction)
Maple Wood, Finished Butternut
PRP 181
Door & Drawer Front shown with
"F" Panel
Cherry Wood, Finished Clear
www.portadoor.com
Page 13

PRP 212MT
Shown with "Q" panel
("MT" Construction)
White Birch Wood, Finished Tuscany
PRP 226MT 5/4
Shown with "R" panel
Rift White oak Wood, Finished Clear
www.portadoor.com
Page 14

PRP 204
Door & Drawer Front Shown
with "O" panel
Sappelle Wood, Finished Clear
PRP 203
Door shown with
"O" Panel, Drawer Front shown
with "Flat" panel
www.portadoor.com
Page 15

PRP 225
Page 14
Door Shown with "Q" panel
Drawer Front shown with "Flat" panel
PRP 242
Door Shown with "C" panel
Drawer Front shown with "Flat" panel
Cherry Wood, Finished Heartwood Cherry
www.portadoor.com
Page 16

PRP 15 with applied #2
Shown with "O" panel
(Applied Mouldings)
White Birch Wood, Finished Fruitwood
PRP 15 with Applied #1
Door Shown with "F" panel
Red Birch Wood, Finished Clear
www.portadoor.com
Page 17

Shown with "M" panel
(Applied Mouldings)
Soft Maple Wood, Finished Rosewood
Cherry Wood, Finished Heartwood Cherry
www.portadoor.com
Page 18

Shown with "M" panel
(Applied Mouldings)
Door Shown with "Q" panel
Paint Grade Wood, Finished Primed
www.portadoor.com
Page 19

PRP 201MT Rope
Shown with "Q" panel
(Rope Mould Doors)
4/4 Rope Mould
MapleWood, Finished Clear
www.portadoor.com
Page 20

Porta Door Styles
PRP 15 w/Applied PDCA 125 PRP 15 "M" Chamfer PRP 15
PRP 15 w/Applied #3 PRP 15 w/applied #1 PRP15 applied #2
PRP 15 w/ applied #8 PRP 15R PRP 25
Page 21 www.portadoor.com

PRP 15 w/Applied #6 4/4 Rope PRP 227 MT
PRP 15 w/Applied #3 Special Bead PRP201 MT
Half 25 Half 55 Half Circle
www.portadoor.com
Porta Door Styles
Page 22

Porta Door Styles
PRP 35 PRP 45 PRP 55
PRP 65 PRP 85 PRP 95
PRP 100 PRP 105 PRP 181

Porta Door Styles
PRP 185 PRP 190 PRP 200M
PRP 201 MT PRP 201 MT Rope PRP203
PRP 204 PRP 212 Mitre PRP 212 MT Rope
www.portadoor.com Page 24

Porta Door Styles
PRP 214 MT PRP 215 PRP 216
PRP 218 PRP 220 PRP222 MT
PRP 225 PRP 226 MT PRP 227 MT

Porta Door Styles
PRP 228 PRP 240 PRP 330
PRP 6565 PRP 5585 PRP 9595
www.portadoor.com
PRP 110110 PRP 214 Mitre PRP 216 Mitre
Page 26

Porta Door Styles
PRP 242 PRP 2525 PRP 5555
PVG 135 PVG 136 PVG 205
PRP 206 Quarter Circle Half Circle

242
5/4
A
5/4 P
5/4 S
4/4
Deluxe
M
P
S
T
www.portadoor.com
Page 28

V
5/4 T
5/4 Deluxe
228
C
N
V2
E
4/4 228
www.portadoor.com
Page 29

Standard Panel Types
O
Q
R
S
T
V
A
B
C
D
E
F
M
W
www.portadoor.com
Page 30

Door & Drawer Front
Edge Profiles
A
B
C
D
E
F
I
L
M
M 1
R
S
www.portadoor.com
Page 32

Door & Drawer Front
Edge Profiles
T
Z
W
www.portadoor.com
Page 33

Drawer Front
Edge Profiles
KI
KR
KS
"K" style drawer fronts are available 4/4 & 5/4 thick.
5/4 drawer fronts are preferred to match the outer edge projections of a 4/4 door.
4/4 drawer fronts are preferred to match the overall thickness of a 4/4 door.
K
KE
KF
www.portadoor.com
Page 34

181
185
200
181DF
1-3/4"
185DF
1-7/8"
200DF
2-3/8"
2-3/8"
2-3/8"
1-7/8"
203 203DF
3" 2-1/4"
www.portadoor.com
Page 35

204 204DF
2-3/4" 1-1/2"
225 225DF
3" 1-7/8"
240 240DF
2-7/8" 1-7/8"
280 280DF
3-1/4" 2"
www.portadoor.com
Page 36

Standard "MT" Profiles
201
218
2-3/8"
212 220
214
216
222
2-3/4"
2-3/4"
2-3/8"
2-3/8"
2-3/8"
2-3/8"
www.portadoor.com
Page 37

Standard "MT" Profiles
5/4 216
2-3/8"
5/4 226
2-3/8"
2-3/8"
1"
0-3/4"
2-3/8"
5/4 227 4/4 227
1"
1"
2-3/8"
1"
2-3/8"
0-3/4"
www.portadoor.com
Page 38

Standard "Applied"Profiles
0-7/16"
Applied #1
0-9/16"
Applied #2
Applied #3
Applied #5
Applied #6
Applied #7
Applied #9
0-7/8"
1-1/16"
0-13/16"
0-1/2"
1-3/16"
www.portadoor.com
Page 39

Frame Only Designs
PRP 15 W/4 LITES DIAMOND
PATTERN QUARTER CIRLE F.O.
GOTHIC MULLIONS HALF CIRCLE F.O. SPECIAL MULLIONS
The frame only designs shown
are only samples of availablity. Frame only's with mullions can
have as many mullion openings appropriate for the size of the
frame. Custom mullion placement is available per customers'
sketch. True divided lites are available on most deisigns.
Please see "mullion Specifications"for compete information
www.portadoor.com
Page 40

Standard"mullion"Profiles
"4/4"
mullions are 5/8" wide.
Used on 4/4 mould and
complex designs.
"5/4"
"A"
"S"
mullions are 1" wide.
"T"
"P"
Used on "P" mould and
"Deluxe mould" designs.
Notes:
Complex Designs are fitted with 4/4 mould
half mullions to accept 4/4 mullion patterns.
All frame only designs are supplied with same specie
frame backs except complex designs. Complex design
frame only's do not come standard with frame backs.
All cross mullions are fiited and splined
for aded strngth.
www.portadoor.com
Page 40.1

Available in all wood types and any size
www.portadoor.com
Page 41

All Shapes and Configurations are Available
www.portadoor.com
Page 42

Custom Scoops available
at your request
Notch and Drilling Available
www.portadoor.com
Page 43

Boxes ordered on the inch + 1/8", 1/4" & 3/8"
will have a full dovetail shown on the top edge of the box.
All other fraction sizes will have varying
degrees of half dovetail clipping on the top
edge of the box.
On the supplied Dovetail Drawer Box order form, indicate Wood Type.
Choose from the options of assembly and finish.
Indicate the amount, the width, the depth and the height.
If there are diciders or fingerscoops, please indicate that as well.
The formula for pricing is as follows:
Determine box size, width, depth and height. Add the width and depth.
Multiply by hright, then divide by 144 to arrive at the square footage of the
box. Multiply by the appropriate material price and add design cost.
Example:
Box size: 13" wide x 21" deep x 4" high.
Add 13 + 21 x 2 x 4 = 272 sq. inches
Divide by 144 = 1.89 sq. feet
1.89 sq. feet x $9.18 ( red oak material cost) = 18.18
Add design ( Assembled) = 8.00
Total Box Charge =$26.18
3/8" 1/8" ? ?
www.portadoor.com
Page 44

Other Products
Sink Cutout
Wood Tops
Custom Valances
Custom Hood Panels

Custom Wall Panels
Angled Wall & Stair Panels
Library Wall Panels
All Wood Types
All Sizes
Custom Designs
Available Prefinished

Porta Door Face Frames
Beaded & Square Edge
Any Configuration available

Porta Door Face Frames
Custom Face Frames & Fitted Doors

Custom Louver Doors

PORTA DOOR CO.
Phone 203 888-6191 Fax 203 888-5803
Sold To:
Address
City State Zip
Phone
Wood Type Panel Type Door/Drawer Design Mould Lip
Width Height Options Price Width Height Options Price
Wood Type 4/4 Panel Type Door/Drawer Design Mould Lip
Amt Width Height Options Price Width Height Options Price
Additional Items
Amt Amt
Amt
Ship To:
Address
City State Zip
Phone
Our # Date
Your #
4/4
5/4
Polish sand
Finish
Notes
5/4
Ship via
Fax

PORTA DOOR CO.
Phone 203 888-6191 Fax 203 888-5803
Options
Finished
Unfinished
Wood Type Drawer thickness
Amt Width Depth Height Price
Custom
Dividers
? + 7/16"
? + 1/16"
Indicate width of notch
Boxes ordered on the inch
+ 1/16" through + 7/16"
will have a full dovetail shown
on the top edge of the box.
All other fraction sizes will
have varying degrees of half
dovetail clipping on the top edge
of the box.
Drawer
back
notching
1/2" 5/8" 3/4"
Assembled
Unassembled
Notes:
Sold To:
Address
City State Zip
Phone
Ship To:
Address
City State Zip
Phone
Our # Date
Your #
Ship via
Fax

Crown Mouldings
5-3/16"
5-1/16"
1"
7-1/4"
2-7/16"
2-3/4"
3-5/8"
PD200
PD130
1-1/4"
1"
1-5/8"
PD100
www.portadoor.com
Page 52

Crown Mouldings
PD180
PD150
1-5/8"
PD120
3-3/4"
3-3/4"
5-1/4"
1-15/16"
2-9/16"
3-7/8"
4-5/8"
www.portadoor.com
Page 53

Crown Mouldings
2-1/16"
3"
1-7/16"
1-3/8"
2"
2-1/2"
2-9/16"
PD115
3-1/2"
PD175
PD165
PD105
PD125
2-1/16"
2-7/16"
1-3/4"
3"
1-5/16"
15/16"
1-5/8"
www.portadoor.com
Page 54

Crown Mouldings
PD480
4-1/8"
2-9/16"
3"
5-1/8"
2-9/16"
3-5/8"
3-1/4"
PD140
PD170
2-15/16"
4-3/8"
www.portadoor.com
Page 55

Crown Mouldings
PD190
PD280
3-1/8"
1"
5"
2-1/8"
2-11/16"
3-3/8"
2-1/8"
2-11/16"
2-9/16"
2-1/8"
3-5/16"
PD225 PD240
3-7/8"
1-11/16"
www.portadoor.com
Page 56

Crown Mouldings
PD270
PD265
4-11/16"
4-5/8"
6-9/16"
2-9/16"
2-3/8"
3-1/2"
www.portadoor.com
Page 57

Crown Mouldings
PD260
1"
PD250
3-15/16"
3-7/8"
5-9/16"
3-1/8"
3-3/8"
4-5/8"
www.portadoor.com
Page 58

Crown Mouldings
PD310
PD300
4-9/16"
1-3/16"
3-7/8"
6"
3-3/16"
2-15/16"
1"
4-3/8"
www.portadoor.com
Page 59

Crown Mouldings
PD400
PD320
4-5/16"
4-3/16"
5-15/16"
1-3/16
5-3/8"
3-1/16"
6-1/8"
www.portadoor.com
Page 60

Crown Mouldings
PD410
PD430
4-7/8"
7"
PD420
5"
1"
2-3/16"
2-1/2"
3-3/8"
1-15/16"
2"
2-13/16"
www.portadoor.com
Page 61

Crown Mouldings
PD440
2-5/8"
3-1/8"
PD450
PD330
3-11/16"
4-1/2"
2-15/16"
2-1/16"
3-1/2"
3-1/4"
4-1/2"
www.portadoor.com
Page 62

Crown Mouldings
PD455
PD460
2-5/8"
2-13/16"
3-3/4"
4-3/16"
3-1/8"
1"
5-1/4"
www.portadoor.com
Page 63

Casings
PDC100
PDC110
4"
PDC115
4-3/8"
3-5/8"
PDC120
1"
1"
3-3/8"
3-5/8"
PDC130
1"
1"
3/4"
www.portadoor.com
Page 64

Casings
PDC150
4-3/4
PDC160
2-1/2"
PDC190
3-3/16"
1-1/4"
1"
3"
PDC170
4-1/4"
3-3/8"
PDC140
1"
1"
PDC155
7/8"
www.portadoor.com
3/4"
Page 65

Casings
PDC235
PDC220
4-1/4"
PDC165
3-1/16"
PDC225
PDC100
3-7/8"
7/8"
1"
7/8"
4-1/4"
1"
4-3/8"
1-1/16"
www.portadoor.com
Page 66

Casings
PDC230
3-5/8"
PDC260
3/4"
3-3/8"
PDC280
2-1/2"
PDC290
7/8"
PDC240
4-1/8"
11/16"
3/4"
3/4"
3-1/8"
www.portadoor.com
Page 67

Casings
1-1/4"
PDC245
PDC155
4-11/16"
4-1/2"
1"
www.portadoor.com
Page 68

Baseboard
PDB100
PDB110
PDB130
PDB145
PDB150
PDB155
www.portadoor.com
Page 69

2011 Product Catalog

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (7)

Ähnlich wie 2011 Product Catalog

Ähnlich wie 2011 Product Catalog (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

2011 Product Catalog