2. 3-phase Motor Stator
o
(3 Windings, 120 apart)
Phase A (Red)
Arrows show Magnetic Flux
when phase voltage is POSITIVE
Phase C (Blue)
A
3-phase Supply
(3 voltages, 120o apart)
Phase B (Black)
B
C
3. 3-phase Motor Stator
o
(3 Windings, 120 apart)
Green arrow shows
flux direction
Three-phase sequence
produces resulting
ROTATING
MAGNETIC
FLUX
Green dotted lines show
resulting magnet flux
Each step is shown
here at 0.5 seconds
(6 seconds per cycle)
4. 3-phase Motor Stator
o
(3 Windings, 120 apart)
Each step is shown
here at 0.2 seconds
(2.4 seconds per cycle)
5. 3-phase Motor Stator
o
(3 Windings, 120 apart)
Each step is shown
here at 0.1 seconds
(1.2 seconds per cycle)
7. 3-phase Motor Stator
o
(3 Windings, 120 apart)
The STATOR core is a
stack of thin silicon steel
LAMINATIONS
8. 3-phase Motor Stator
o
(3 Windings, 120 apart)
Windings are coils placed in
SLOTS around the STATOR
The coils are connected in groups
for each of the THREE PHASES
9. Speed – Frequency - Poles
The SPEED of the rotating magnetic field
is determined by:
Supply FREQUENCY in Hertz (Hz)
Number of magnetic POLES
produced by the stator windings
10. Speed – Frequency - Poles
The SPEED of the rotating magnetic field is determined by:
x2 Poles to PAIRS
x60 rps to rpm
N Synch
Synchronous
Speed (rpm)
Frequency
(Hz)
120 f
=
P Number of Poles
per phase
12. Production of Torque
Note that the ROTOR
LAGS behind the
rotating magnetic field
(Watch the pink dot)
Hinweis der Redaktion
The winding of a 3 phase motor are consist of 3 separate windings connected 120 degrees electrically apart
These winding can be connected either in star or delta configuration
The windings start of the winding is usually labeled A,B 0r C and ends of the winding are labeled A1,B1,C1 or sometimes the letters U, V ,W are used
(Draw star delta and label)
