1. Making Jet Plane from cigarette box<br />Materials: -Marlboro cigarette box-scissor-tapeInstructions: Step 1: - Try to separate the cover at the side of box, carefully remove the foil paper, the foil paper will be used as the jet plan head. Step 2: - Cut the cover of the box as the following pictures Step 3: - for the lower part of the box, fold the 2 edges inside like this Step 4: - For the upper part, make a cleft at the 4 angle - Fold the 4 corners backward and cut along the curved centerline. Step 5: - make a cleft at the middle part of step 3 - tuck the part from step 5 into the slot Step 6: - Cut the bottom piece into the fish bone shape and then fold in the middle to the ‘I’ shape. -Insert the ‘I’ shape pieces just made​​upon the bottom line in excess of the fuselage. Step 7: - Bend the middle piece of box lid.- Cut the top slots and bent two of the last remaining pieces. Step 8: - curl into pieces by folding lid and attached to the tube in the fuselage to the tail light. - And the last piece with two curved edge will be attached to the wing to the jet pipe. Step 9: Roll the foil paper into the tip and attached to the aircraft.Finally<br />Translated by Nhat Nguyen on March 30th, 2011<br />Source: http://kenh14.vn/c34/200961823420444/may-bay-phan-luc-cuc-la.chn<br />