3. EW ERA BLOCK TILE JSC (E-BLOCK JSC) IS WELL AWARE OF THE POSI-
TION AS THE PIONEER AND THE LEADER IN PRODUCING AAC BLOCK
(AUTOCLAVED AERATED CONCRETE) IN VIETNAM. HENCE, IT IS CON-
STANTLY COMMITTED TO PROVIDE TO ITS CUSTOMERS WITH:
Best quality products
Most competitive price
Most convenient orders and fastest delivery
Environmental-friendly products and sustainable development
Best customer service including consultancy, promotion, after-sales services, and
the like.

4. he construction materials, which is well-known world-
wide under the name of AAC block, was invented in 1923 by
a Swedish architect, Johan Axel Eriksson. The main compo-
nents of AAC block are sand, lime, cement, gypsum,
aluminum powder, and water. Thus, it is highly valued for its
lightweight, great compressive strength, suitability for wall
building, resistance to earthquake impacts as well as ther-
mal insulation.
Therefore, AAC block has revolutionized the construction
material to make it multi-functional and still ecological
friendly. In fact, using AAC block can cut down the amount
of CO2 by 5 times through raw materials and wastes treat-
ment processes .
In Vietnam, AAC block is introduced and manufactured by
E-BLOCK JSC under EBLOCK brand name.
INTRODUCTION

5. hanks to the pre-eminent characteristics, AAC block has acquired an overwhelming market
share in the developing countries in Europe, North America and North Asia. In addition, AAC
block has started to be used more commonly in developing countries.
According to Decision No. 121/2008 of the Prime Minister on approving the overall plan of
Vietnam’s industrial construction materials, the Ministry of Construction is assigned to
formulate the development program of non-fired construction materials till 2020-year, in
which alternative materials step by step replace the traditional building materials so as to
protect the living environment. Following that, AAC block is chosen by Vietnamese Govern-
ment due to its outstanding features.
E-BLOCK JSC is proud to be the pioneer in introducing AAC block, which is based on German
technology, to Vietnamese market under EBLOCK brand name.
EBLOCK is the first lightweight concrete block product manufac-
tured in Vietnam that can meet TCVN 7959:2011 standard and
is strongly recommended by Green Building Council Vietnam.

6. In cooperation with Fossett
Corporation from UK, the first
AAC block factory which used
German technology was con-
structed in Long An on June
2009. The total capital invest-
ment for the first phase was
VND 160 billion. One year
later, on June 2010, the first
EBLOCK pallets were used in
the construction projects.
Currently, the factory’s capac-
ity reaches 150.000m3
of
products per year. In the near
future, when the factory is
fully established, it is
expected to accomplish the
designed capacity which can
produce 450.000m3
per year.
The factory produces not only
EBLOCK lightweight blocks
but also lintel and panel prod-
ucts. It also manufactures
specialized thin-bed mortar,
plaster mortar and skimcoat
for AAC blocks with the
capacity of 30.000 tons per
year.
E-BLOCK JSC’s factory is
located at Thinh Phat indus-
trial park, Ben Luc district,
Long An province. The
factory has approximately 5
ha, including a 10.000m2
workshop, a nearly 1.500m2
for thin-bed, plaster mortar
and skimcoat workshop sup-
ported by an office building
with 1.500m2
floor area.
There are extra areas for pro-
cessing raw materials, storing
final products, boiler house
and facilities for workers.
COÂNG TY COÅ PHAÀN GAÏCH KHOÁI TAÂN KYÛ NGUYEÂN

7. E-BLOCK always attempts to deliver the best quality block to its customers. All raw materi-
als as well as final products are sampled to test the quality instantly at factory’s laboratory.
All production phases included selecting raw materials, grinding, mixing, curing, cutting and
autoclaving are automated by a closed production system and standard technology trans-
ferred from Germany.
The operation process and quality control are checked monthly by QUATEST 31
experts under
the long-term contract.
Quality Assurance and Testing Center 3 (QUATEST 3) is a Science-technological Organization of the Directorate for Standards,
Metrology and Quality (STAMEQ) – Ministry of Science and Technology (MOST)
1

8. High-standard process and reasonable
investment ratio have enabled
E-BLOCK to dominate the market in
terms of product variety, high quality
and competitive price. Currently,
E-BLOCK products are not only used
commonly in domestic market but also
qualified the requirements for export-
ing to foreign markets.
Besides the technology, E-BLOCK JSC
highly focuses on training and coach-
ing its people. Attending training
classes are required for all staffs to
ensure they understand clearly about
the manufacturing process, quality
control and labor safety.
Furthermore, E-BLOCK JSC has joined
various trading promotion programs
including fairs and exhibitions. The
firm also organizes specialized semi-
nars to introduce innovative technolo-
gies and products.

9. E-BLOCK JSC provides full building solution package including lightweight concrete block with
different sizes in accordance with individual project, thin-bed mortar and plaster mortar. In
addition, the company also supports customers with construction guidebook as well as the
tool-kit for different building processes and fulfillment.
Dai Thanh Apartment Buiding HCM City
5 Star Hotel Pullman SaiGon Centre RMIT University International Viet Nam
Projects build up with EBLOCK

10. E-BLOCK JSC’s staffs are always willing to provide
consultancy and coordinate with customers to achieve the best solution.
E-BLOCK JSC’s factory has such a convenient location that can reach the customers quickly
and easily. The factory is located near Ho Chi Minh port which is very favorable for exporting
activities. Moreover, the surrounding constructional areas such as Ho Chi Minh City, Bien
Hoa, Binh Duong, Tan An, and My Tho are the advantage for E-BLOCK JSC to compete in the
domestic market.

12. Reduce costs, increase quality
Reduce costs, increase quality