2. INTRODUCTION
This presentation provides general information on the following aspects
of OpenEye OPTIX Cameras:
Each slide contains some basic information on the purpose of the
described function and identifies the associated options.
11. FIXED CAMERA MOUNTS
QUICK MOUNT ADAPTER
The OPTIX quick install adapter is included with every
CM-200 Series camera, and can dramatically reduce
installation time.
23. INDOOR IP MINI DOME
CM-610
OpenEye’s CM-610 camera is a small form factor indoor
camera designed to reduce installation time and cost by
utilizing Power over Ethernet. The CMOS sensor in the
CM-610 provides a 2MP high resolution image using either
MJPEG or H.264 codecs. The 610 also includes an integrated
microphone for audio transmission (where permitted by law).
24. OUTDOOR IP MINI DOME
CM-710
OpenEye’s CM-710 is a small form factor rugged Network
camera designed for outdoor installations. The 710 is IP66
rated against weather, and comes with an IP67 rated network
adapter cable and adapter for a fully ruggedized installation.
The CMOS sensor in the CM-710 provides a 2MP high
resolution image using either MJPEG or H.264 codecs.
25. CM-610 VS CM-710
The CM-610 and CM-710 cameras are nearly identical and share the same configuration options. The difference
between the two is that the CM-710 is suitable for outdoor installation while the CM-610 is not. Below is a complete list
of differences between the two cameras.
CM-610 CM-710
Ingress Protection (IP) Rating N/A (Indoor Only) IP66
Audio Inputs 1 0
RJ-45 Input On Base On Cat5 Lead
26. OUTDOOR IP DOME
CM-715/CM-715A
The OpenEye CM-715 is a 2 megapixel outdoor dome
camera which provides an IR cut filter for a true day/night
image. The CM-715A features an auto-focus lens.IP66 rated
against moisture, tamper resistant, and equipped with an
integrated heater and fan for operation in temperatures as low
as -40°F (-40°C), the 730 is built for tough environments
where normal security cameras cannot survive.
27. OUTDOOR IP DOME
CM-730
The OpenEye CM-730 is a 1.2 megapixel outdoor dome
camera which provides wide dynamic range imaging for
installations where high contrasting lighting is a problem, and
has an IR cut filter for a true day/night image. IP66 rated
against moisture, tamper resistant, and equipped with an
integrated heater and fan for operation in temperatures as low
as -40°F (-40°C), the 730 is built for tough environments
where normal security cameras cannot survive.
28. CM-715/730 ACCESSORIES
CA-730PH (PENDANT HOUSING)
The CA-730PH adds a sun visor and should be used in
warm environments where the camera will be directly
exposed to the sun. It also adds compatibility with all
CM-511/CM-814 mount options.
29. CM-715/730 ACCESSORIES
CA-730FMK (FLUSH MOUNT KIT)
The flush mount kit for the CM-730 allows it to easily be
installed in a ceiling for a custom and discrete look.
30. OUTDOOR IP PTZ DOME
CM-814
The OpenEye CM-814 is a 4CIF (720x480) outdoor PTZ
dome camera; ideal for all installations that demand high
quality video with mechanical pan/tilt and optical zoom
control. The 814 provides wide dynamic range imaging for
installations where high contrasting lighting is a problem, and
has an IR cut filter for a true day/night image.
31. 1 CH VIDEO SERVER
NE-VS201
The VS201 uses either 12vDC power input or PoE and
includes a 12vDC power output to easily scale into existing
installations. The VS201 has a looping video output for use
with CCTV monitors and displays, an RS-485 bus for control
of PTZ cameras, and alarm input and output for hybrid sensor
integration into OpenEye's NVR and HVR systems.
33. ACCESSORIES
CA-D4000
The CA-D4000 is a multi-function tool designed to ease
installation of analog and network cameras. Its
capabilities include display of analog or network video,
analog or network PTZ control & network cable testing.