Step 1 Cut 15cm 18 gauge jewelry wire. Use round nose plier to make an open spiral on the right ends. Step 2 String a bead and surround the surface of the bead with the wire. ... Step 3 Erect the bead as shown in the picture. Tip: To make the frame elegant, you can bend the wire a little bit.

1. Wire wrapped bottle pattern1
Step 1 Cut 15cm 18 gauge jewelry wire. Use round nose plier to make an
open spiral on the right ends.
Step 2 String a bead and surround the surface of the bead with the wire.
Step 3 Erect the bead as shown in the picture.
Tip: To make the frame elegant, you can bend the wire a little bit.
Step 4 Make a vertical angle with the line.
Tip: Reserve enough length wire as the wire needs to surround the
bottom beads for one loop.
Step 5 Sting a bead from the right wire end and bent upward.
Step 6 Bend the left wire and surround the surface of the bottom bead.
Step 7 Make a free style spiral to the right wire and attach the chain to

2. the spiral. Congratulations, you have made an elegant bottle.
Step 8 Congratulations, you have made an elegant bottle.
Source from:
http://www.beadinfashion.com/jewelry-making-tutorial-wire-wrapped-b
ottle-pattern-1/