This document outlines the steps for Lab 8 of the ELEC 101 course. The lab covers schematic symbols for common electrical components like capacitors, resistors, and transformers. It also covers simulations of RC circuits to analyze the critical frequency, using a parametric sweep to vary capacitor values, and measuring the voltage transfer function of a transformer. The goal is for students to become familiar with component symbols and analyzing circuits using PSpice simulations.
8. Lab 8D Transformer Properties
DCL on the Transformer
In the Property Editor
Enter values for Coupling, L1_Value and L2_Value
1 October 2003 ELEC 101 Lab 8 8
12. Lab 8A Output Waveform
We are interested in the Critical Frequency (-3db from curve maximally flat)
Show Change of gain (Y Axis) of 20 DB
Show 1 decade where flat and show 20 db of rolloff)
1 October 2003 ELEC 101 Lab 8 12
13. Lab 8A Y Axis Settings
In the Data Range section, CL on User Defined
Change the Y Axis Data Range to -20 to 0
1 October 2003 ELEC 101 Lab 8 13
14. Lab 8A X Axis Settings
In the Data Range section, CL on User Defined
Change the X Axis Data Range to 1Hz to 10kHz
1 October 2003 ELEC 101 Lab 8 14
15. Lab 8A X Grid Settings
CL to Remove Check from Automatic
CL in Minor Intervals between major for 10
1 October 2003 ELEC 101 Lab 8 15
16. Lab 8A Output Waveform
We are interested in Critical Frequency (-3db from curve maximally flat)
Show Change of gain (Y Axis) of 20 DB
Show 1 decade where flat and show 20 db of rolloff)
1 October 2003 ELEC 101 Lab 8 16
17. Lab 8B Schematic
Output across R1
Use Differential Voltage Probe
In Probe, modify Trace for db( )
1 October 2003 ELEC 101 Lab 8 17
30. Lab 8A Schematic
Output across C1 with respect to ground
1 October 2003 ELEC 101 Lab 8 30
31. Lab 8A Output Waveform
We are interested in Critical Frequency (-3db from curve maximally flat)
Show Change of gain (Y Axis) of 20 DB
Show 1 decade where flat and show 20 db of rolloff)
1 October 2003 ELEC 101 Lab 8 31
32. Lab 8B Schematic
Output across R1
Use Differential Voltage Probe
In Probe, modify Trace for db( )
1 October 2003 ELEC 101 Lab 8 32